Frustrated - Installer does not see all hard drives

Ok. I'm a pretty basic user and here is my situation. I have a G5 with two internal drives. On one drive "A" I have OS X 10.3.9 installed (using that now) on the other internal drive (B) I have 10.4.7. All was working fine using drive "B" as my start up until I used Tech Tool this morning to check/repair volumes on "B". After all the repairs made I tried reboot to OS-X 10.4.7. The choice was there in System Preferences.
No luck, I now only get the black death screen telling me to reboot. Rebooting does nothing except bringing the must shut down and reboot screen. I tried to use my 10.4 Tiger installation disk to reinstall 10.4 on the "B" drive but the Apple installation program doesn't "see" the drive and so doesn't offer it as an option to install to. The program only sees the "A" drive.
I tired to install 10.4 on my "A" drive as an upgrade- I get an "errors" almost immediately after it starts and cannot install the up-grade.
I tried disk utility (from A drive trying to repair B drive)- it cannot "repair" disc B. I can see and use my B harddrive when in 10.3.9 - all programs and files are there and useable - but I can't boot from it nor is it recognized by the Tiger Installation disc. I seem stuck in 10.3.9.
I have a brand new external firewire drive not hooked up - I'm tempted to drag all files from "A" and copy it to the new drive and then reformat the "A" drive and try a clean install on "A" with 10.4. But I'm a bit nervous - if it doesn't work then I'll have no functioning operating system.
Sorry. I'm going a little crazy. Any ideas? I'm frustrated and plan to trash Tech Tool if I ever get back to 10.4.7.
G5 Mac OS X (10.4.6)

It looks like both your drives have serious problem (that's why Disk Utility says it can't repair and you can't update the system in drive "A"). The fact that you can boot into 10.3.9 doesn't mean that the problems don't exist. In your case I would trust either drive and would do a backup of all the data, reformat the drives and then reinstall everything since the tols you have can't solve the problems.

Similar Messages

Windows XP re-installation does not recognize any hard drive - help

Hi,
I have X60s Model: 17044JU
I have original XP installed.
My computer is very slow and I am trying to reinstall XP from my CD (and format HD so I clean everything).
When Windows installations blue screen shows up and loads drivers etc then it tells me that it does not recognize any hard drive.
I thought I may need SCSI or RAID drivers but since I don't have floppy I can not load them.
Any help how to install new XP would be appreciated.
Thank you
Miron
Moderator edit: Masked serial number to prevent mis-use.
Solved!
Go to Solution.

Hi
I changed BIOS setup from AHCI to Compatibility and indeed it worked.
However there is easier way to reload new system on thinkpad.
I didn't know that but you can press ThinkVantage button when you start your laptop and IBM utilities start up.
Then there is an option to reload the system to be in original state as shipped from the factory. It loads or drivers and initial programs. It also formats your hard drive.
I found it pretty convenient.
Thanks for help.
mc

AirPort Extreme does not see printer, hard drive, AirPort Express!

I just got an AirPort Extreme (802.11n), to replace my AirPort Express. I have a Brother 665CW wireless all-in-one printer, which had worked perfectly but now I cannot find it. I have also hooked my USB hard drive into the Extreme. I can see the hard drive in the AirPort Utility, but I don't know how to find it from my iBook. I'd also like to put the Express in another room to use the AirTunes feature. Unfortunately, almost nothing is working!
Here is how it's set up:
Den:
AirPort Extreme - hardwired to:
- DSL modem
- hard drive (via USB)
Brother 665CW (wireless)
Living Room:
AirPort Express
Advice would be appreciated. I'm usually able to troubleshoot my problems, but documentation on this Extreme is really bad! Thanks!
iBook G4 Mac OS X (10.4.9)

I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

G3 does not see desktop hard drive.

Hello! Back in April 2006, I purchased a blue and white G3 from my employer. I installed some extra memory, wiped the hard drive clean and installed OS 10.3.x and Adobe CS. Everything worked beautifully.
I shut down the computer, unplugged it, wrapped it in plastic and stored it in a safe place until I moved to my new home. I recently took my G3 out of storage over the holidays and tried to set it up. When I turned it on, I got the “Happy Mac” symbol along with the blinking “question mark”. I was disappointed that all of the previous installations I had put in seemed to be missing.
I decided to re-initialize the hard disk (desktop) and re-install the OS 10.3.x and the other Adobe programs. The G3 has no problems starting up from the start up disk, but there is no desktop ( or hard drive) icon in the upper right corner of the screen. Only the start up disk icon is visible.
When I start to install the OS 10.3.x, I get stuck where it prompts me to select a volume to install the OS. There are no options. I cannot select my hard drive because it simply does not appear. The “options” button is “grayed” out.
I tried using the disk repair utilities and still I had no success in locating the hard drive.
There were 3 items which were showing up in the list, all of which had a “CD” icon. The first icon had a disk with a Japanese sounding name. I could not select it and I could not even verify or repair it. The second icon was also with a disk, with the name “Session 1”. Again, this could not be verified or repaired. The third icon was the start up disk icon.
It is as if my computer can’t see itself! I can’t install anything because there seems to be no desktop to install it into. It is quite frustrating, especially because I had taken the time to set it up last year and everything was working perfectly fine before my computer went into storage. My G3 seems to be “happy” even though it can’t start up without a start up disk. I am hoping that I don’t have a hard drive melt down. I would greatly appreciate some help on this! Thank you!

Hi Limnos, Grant and Eustace,
Till now, I had my G3 on "sleep" with my start up disk in the CD drive. I followed Limnos' instructions and opened up the side again. I made sure I was grounded and I tapped the hard drive. There was no noise or whirring. I placed my fingers on it, and there were no vibrations. The Blue Moo was really blue now. I thought for sure the drive was dead. With a heavy heart, I began to close the computer up. As I clicked the side closed, all of a sudden, I heard the familiar "whir" of a hard drive. I dared not to get too excited. I quickly ejected the start up disk, and lo... the G3 started up on its own!!!!! I had my hard drive icon, my programs, everything was there!
I had no problems re-installing the OS 10.3.x, I had no problems upgrading my Adobe CS programs.
My hard drive was there, exactly where it was supposed to be.
I don't know what exactly what brought it back from the dead. It may have been a combination of all your good advice put together and a bit of luck. In any case, I am up and running and I am truly thankful to all of you for your help. I also learned quite a bit from this experience from you guys, and that in itself, was very valuable to me!
I can't believe how last week, I was thinking I may need to get rid of my G3. But I stuck to it, and with your help, I now have a fully functioning machine!
Buckets of thanks to you again!
The Blue Moo (a very happy Moo indeed!)

Win7 install does not see new hard drive (640gb Samusung) on MacBook Pro

Replaced MBP 5,4 (mid 2009) hdd with a Samsung HM641JI 640gb drive. OS X installation went fine using SL install disk, updated software to 10.6.4. Problem is with Windows 7 installation using Boot Camp. Partition is created (tried 32 to 300 gb). Windows 7 install disk loads but after "Install now" and accepting license agreement, it does not recognize the drive or any partitions. XP install works fine. Had same Win7 problem with 2 identical hdds and 3 different install disks which were full version, not upgrades. Installed Win7 using boot camp on 320 gb Samsung drive (also 3.0gb/s SATA) without a problem. Tried formatting the bootcamp partition on the 640 gb drive to NTFS, but still not recognized. Any suggestions?

Odd you can't see anything. I'd use Windows 7 recovery tools to do a full initialize and map out bad blocks if necessary. Or initialize from OS X drive and then do full slow format etc from Windows DVD.
Every drive vendor has their own linux/dos/windows utility to recertify and test sectors and does a better job than anyone else's. WD Lifeguard for all my WD drives, can be very handy.

Clean install Windows 7 does not see my hard drive

I just bought a new h8-1234 and I want to get everything off of the hard drive. Sorry, I just like to have what I want on my hard drive, not a buch of junk that I will never use.
So, I pop in my trusty Windows & 64 bit disk, the install proceeds and stops...It's tell me to install the drivers for my hard drive and I can see that the hard drive list is empty..
I tried to find the drivers for my modle of computer, but HD drivers are not listed. Is there a generic sata driver I could try on use?

Hi:
You can try the ones I have attached, but I always thought that Windows 7 and Vista had all of the SATA drivers already installed. I've never come across a situation where W7 or Vista asked for Hard drive drivers.
They are the latest ones obtainable from AMD's site.
I see that your PC has a a new AMD 9xx chipset, and that isn't even listed on AMD's site for support.
Paul
Attachments:
AMDx64.zip ‏160 KB

My time capsule does not see external hard drive

I just got a new time capsule and am hoping to use it as a wireless bridge and NAS.
I've got it set up as a bridge and that seems to be working correctly, but when I plug my external hard drive into the time capsule, I can't see that external drive show up anywhere.
Has anybody else run into this issue?
The hard drive is a WD Elements 3 TB USB 2.0 Desktop External Hard Drive - WDBAAU0030HBK-NESN.

I can't see that external drive show up anywhere.
If the drive is formatted correctly and communicating with the Time Capsule, then it will be displayed when you open AirPort Utility, click on the Time Capsule icon, click Edit, and then click the Disks tab at the top of the next window. Example:
Remember that since this drive is a "network" drive, it will not be displayed on the desktop until you manually mount the drive.

Macbook does not see new hard drive

I have one of the first black macbooks...
Intel Core Duo
2GHZ
2mb L2 Cache
2GB RAM
667 MHz bus
Boot ROM Version: MB11.0061.B03
SMC Version 1.4f12
I had an 80GB HD in it that has died. I decided to replace it with a WD Scorpio Blue 160GB.
I've booted to the optical drive and went into Disk Utility to format the new drive but the computer would not recognize the drive. So I formatted it with another computer using a USB enclosure. I put the new HD back and still not recognized.
I then went ahead and installed Snow Leopard on the new drive via USB enclosure, using the macbook I would eventually put the drive into.
Now when I put the new drive, with the OS installed, still not reco

Let us resume the required steps, after putting inside a new, virgin disk:
1. Start up machine and as soon as possible put CD/DVD, press key C to force boot from CD; if the sequence is not fast enough and machine passed over the initial phase, and ? was displayed, force shut down by pressing button key, then start again, with CD/DVD inside
2. Press key C after start, and wait until the Apple logo in displayed, wait
3. You will see a list of install language, choose one, and
4. Go to Apple bar and choose Disk Utility; on the left side, you will see the disk, select it, then, on the cenral-lower part of displayed windows go to Options and choose Apple Partition Map (APM), go back and choose, if not already chosen by default, Mac OS Extended Journaled (HFS+), 1 partition (or more, some prefer more than one), click to partiion/erase disk. Note that you MUST have both conditions achieved: APM and HFS+
5. Close Disk Utility and revert to installation proper, proceed.
If you do not see the disk on the left side of Disk Utility, then disk is damaged or badly connected.
P.S. The same procedures are applied to any disk, with the note that:
- for Intel Macs, partition map should be GUID, not APM
- for external disks or flash drives intended to smoothly work with Windows, format should be FAT 32 and Master Boot Record; NTFS may be done with an additional utility like NTFS-3G or NTFSmounter

My new airport extreme does not see the hard drive

I have a new airport extreme with a hard drive connected to the USB port but the airport can't see the disk. I verified the firmware and is 7.7.1
http://support.apple.com/kb/DL1665
Disk was working good but after Mavericks, the problem start.
Any suggestion?

I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

Installer does not see hard drive, how do I mount

Initialized Hard Drive with current volume and as mac extended and zero'd out memory. This drive came out of a PC that had been out of whack and drive was partitioned wrong in the PC. It worked fine to load mac OS 9.2.2 and has 18 gigs free. When I boot off of the Tiger disc it does not see the hard drive at all. Neither does the disc utility function. I checked the firm ware and it is up to date. Ran disk warrior and it says all is ok. Is it something simple?
I can't figure out what it is I have over looked. Thanks

Try this instead:
1a (If this is the startup drive.) Boot from your OS X Installer Disk. After the installer loads select Disk Utility from the Installer menu (Utilities menu if using Tiger.) Be sure to use the installer disk for the version of OS X you intend to install.
1b (If this is a non-startup volume or external drive.) Open Disk Utility in the Utilities folder of your Applications folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
If this is the second drive in your computer, be sure you have jumpered the drive as SLAVE (assuming the original hard drive is jumpered as MASTER.)

Imac will not see my hard drive on start up, wants to start from network start up disk that does not exist. How to get rid of it? So there is just one choice / my hard drive.

I have a Intel duo Imac. Everything has been running relatively smoothly for a few years now. All of a sudden my computer will not start. I get the flashing folder with a question mark.
When I go to Start up disk in my system perfernces while the computer is on. I see 2 possible choices. One is my hard drive with the operating system shown. The other is a non-existant Network Start up disk with a question mark in it ( looks like a hard drive with a question mark and it say's its a "network start up disk).
All I think I want to do is get rid of the Network startup with the question mark. I can not find anywhere how one can just remove an old or non existant start up disk without reformatting.
I believe this came from a clients hard drive who had a network system on it. We no longer have that drive. It no longer exists. But a latent icon shows up in start up disk.
When I go to change the start up disk. I can change it to either the hard drive or the network with the question mark. But when I select my hard drive and then got to restart the computer. I get the flashing folder with a question mark on start up. I have also seen the flashing globe a couple times.
When I attempt to run disk utility from may install disk ( holding down "C" on start-up ). Disk utility does not see my hard drive. Just the Apple install disk with the disk utility on it.
What can I do to remedy this short of re-installing? Will a program like Disk Warrior or Tech Tool help?

Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know? It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks.

IBook G4 not seeing the Hard Drive

My iBook G4 does not see the hard drive. When the computer turns on I get the flashing smiley face in the folder. When I put the disk for the computer in then the computer starts up but cannot see the hard drive so I cannot get into anything. I even put the computer in safe mode to see if I could get it to work and I couldn't. I had a friend who works on computers look at it and he said I needed a new hard drive. So I changed out the hard drive and the computer worked fine for 3 days and then it did the same thing. I'm not sure if there's a problem with the logic board or really what is wrong with it. Please help

Cantobellus:
So I changed out the hard drive and the computer worked fine for 3 days and then it did the same thing.
This seems to suggest that your HDD may not be the problem. Try the old HDD you removed by putting it in a firewire enclosure and connect it to the computer and see if you can boot the computer from it. I experienced a similar issue with a iBook G4 which is detailed in the thread Could it be the logic board?. Your issue may be different, but the thread may give you some ideas for troubleshooting.
Cheers
cornelius

Help my computer does not recognise my hard drive

Hi All,
Yesterday I turned my computer on to find that it would not start up. I tried following advice etc about starting up in safe mode etc but no help what I have found is that he computer does not recognise the hard drive anymore so when I out the osx install disk in and run system profiler and disk utility it does not show a hard drive. I have not done anything for this to happen. Can anyone help me with this.
Thanks.
Paul

Instead of using older OS X CD/DVD install to a new drive.
Where is your backup and clone?
Buy some drives! that is a must.
Pick up a FW case, you will need it to put the old drive in, and later, so you have an external and off line drive for backups and maintenance.
A copy of TechTool Pro 4/5 and Disk Warrior (DW first).
SuperDuper to clone your drives.
Demo of Prosoft Data Rescue 3 to scan the drive once you have a system and you put the 'dead' drive in FW case.
Then do backups and preventative maintenance on a very regular basis and have at least two backup sets.
If you have been doing that, and know and have read those instructions in the past....

Time machine not seeing external hard drive in time line

can anyone help
time machine not seeing external hard drive in time line
before 2013
information say in 2009 is not accessable to view this
i must select external drive from finder
the time machine icon not recognising

thanks for reply
when i open time machine the time line on right side of page
has date ranging from 2014 back to 2010 but only highlight date from 2014 back to 2013
anything before 2013 is greyed out and cannot not be selected
when i touch the pages they only rush towards me a limited amount then stops
also why it shows date as 2014 is strange

Extension manager does not see all of my adobe programs?? What can i do without reinstalling????

Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0

Same issue. Doesn't see Dreamweaver.

Frustrated - Installer does not see all hard drives

Similar Messages

Maybe you are looking for