Frustrated with Audigy 2zs drivers

"Frustrated with Audigy 2zs drivers\ Hi,
I really need some help with drivers for my Aud 2 ZS Plant card as i am very frustrated. A couple of months ago I reformatted my HD and subsequently re-installed all my drivers. When I was ready to install my soundcard drivers\software I could not find my installization disc as I moved to a new place 6 months ago and I guess they got lost in the unpacking. Since then I have tried to find drivers for my card and in the process have?used 3rd party drivers ie. KX, PAX, and daniel_k but could not get them working or they (KX) were hard to understand. Anyway, I am to the point now that I just want to have sound with functioning software where I can get back to doing some hobbyist home recording as I did before with orginal drivers. In saying that, can anyone please point me in the direction to find the most up to date drivers for my card? Iam running WIN XP Pro sp3. I am to the point now that I want to take the card and front dri've bay out of my system, chuck it, and go and buy a $20.00 generic card.
Help would be much appreciated.
Tappy

If you want the latest drivers I'd use Dan K's if I were. None of the old software works with the latest drivers so you're kinda stuffed. Dan K's are based on the 2.8.000 drivers which are the second to latest drivers available. Don't use the 2.8.00 drivers - they cause more problems than they solve.
Before installing any more drivers/software it might be an idea to make sure there's nothing left of any previous drivers you've tried to install. Could be what's causing the problems.
This is how I remove my drivers. May seam a little convoluted but in your case it may prove useful to be as thorough as possible.
You'll need Driver Sweeper, and CCleaner, 7Zip and Dan K's Audigy Support Pack 2.0 (if you don't already have them).
Download these and install; Driver Sweeper, CCleaner and 7Zip.
Now you need to extract all the files out of Dan K's support pack, which should be an *.exe file. You need what's inside that *.exe file. After installing 7Zip, you should see a new 7Zip options menu when you right click on files or folders?
Click on it and then select Extract files to Audigy Support Pack... or something similar. Don't just select Extract files.
Inside the new folder that should have appeared after 7Zip extracted everything, you'll see another folder named Drivers.
Copy this folder to your desktop.
Now reboot and start Windows in safe mode.
Click Start then Run and type cmd.exe to open a command prompt, then type (minus quotes):
" takeown /f C:\Windows\*.cdf " and hit enter, then:
" cacls C:\Windows\*.cdf /G *insert your logon name*:F " and select Y and hit enter again.
You can now close down that command prompt window.
Go in to the Drivers folder you copied to your desktop and run Setup.exe and this should appear:
<img border="0" src="http://theliability.googlepages.com/creative_uninstaller.png">
Select the same options as above and click OK and let it do it's thing - when it says reboot your PC click No or Cancel.
Now run Driver Sweeper and do a scan for all Creative drivers then click Clean.
Don't worry if it says things like file doesn't exist or some other error msg. It'll still get a few things.
No load up Add or Remove Programs (personally I prefer Revo Uninstaller) and remove anything related to Creative.
Finally load CCleaner and scan/clean your registery.
Reboot back in to normal Windows.
And that's it. A tedious process I know, but it's the only way I've found of properly stripping CLs drivers out.
You'll know if it's worked because when you now go and install Dan K's pack the installer should just run straight through. When there's still driver remnants the installer always says it's found previous drivers and need to uninstall them and reboot.
tbh I recommend running through this process regardless of wether or not your choose to stick with the old drivers or go with the newer ones.
Creative's drivers are infamous i'm afraid and at least after this your PC should be relati'vely clear or remnants.
Message Edited by Meocene on 07-23-2009 07:08 [email protected]

Similar Messages

Problem with Audigy 2ZS and Logitech z5500 speakers

Hi, all. I've had my Audigy 2ZS for a while, and I've been using Creative 4. speakers. I just got the logitech z5500 5. speakers, and I've been trying to get them to work properly with my soundcard, but it's giving me headaches.
The setup: I'm using the 3 direct inputs to go from the sound card to the speakers, so all the various digital issues I've read about *shouldn't* be issues for me.
The problem: When I do my a sound test using the Speaker Settings controller, my rear speakers are reversed, and one of them doesn't play at all! I've confirmed that all my speakers work, and I've used the diagnostic tools that come with the speakers to make sure that the speakers themselves are set up and working correctly.
Does anyone have any suggestions? I'm really frustrated...this seems like it's either a card or software issue, but I'm just not certain how to fix it.
Thanks!

I had the same problem with two different X-Fi extreme music cards. I fixed it by running the speaker test for individual speakers and changin the speaker settings ad nauseum. 'tis an issue with the jack sensing on the drivers.
If you unplug all the connectors and plug them back in, you'll find that some other channel gets screwed up.

Problems transferring music from turntable to computer with Audigy 2ZS Plse He

I originally had Sound Blaster PC28. I have installed last year Audigy 2ZS with 6 analog plugs and updated regularly. Everything is fine from burning to playing music of any format allowed. However, last week I tried to transfer vinyl music to my computer using Sony Sound Forge Version 8 and nothing works. Here's what I did. Luxman Turntable connected with ground to LINE IN ( in DENON amp ) and in the AUX output I have 2 Monster cables boing to my computer twinned on goldplaited /8 jack which is connected to the second (from right) LINE IN in the sound card. This done while referring to Manual & Getting Started Demo Creative program in the software. NO SOUND AT ALL COMES IN the computer - while the music is playing qell on my audio system player. I've done all kind of adjustment with the Microsoft Volume Play & Recording Controls and with Creative Mixer.
I can only distinguish on Sony Sound Forge two volume bars that there is some faint connection fluttering . I still tried to record but upon playback, there is no visual waving lines illustrated in SoundForge window nor sound played back. I expected that. What am I doing wrong or is Audigy 2ZS not suitable for such ? FYI, I tried the other5 jacks on the sound car ( adjusting to WHAT U HEAR or LINE IN controls ) .
The infos in Creative manual and software demo show the 2nd jack of analog sound card from the right being used as a LINE IN for cassette, synthesizer & cd player ( Iguess it goes also for truntable ? - i tried with cd player and it does not work either ) Third jack from the right is only for microphone (also tried but does not work either) . Sorry for lenghty description, I tried all I could . Am retired 7 yrs old and i wish to transfer all my jazz vinyls to puter inorder to make cds. Kindest to All for your help. Merci beaucoup !

nighthawk7jazz wrote:
I originally had Sound Blaster PC28. I have installed last year Audigy 2ZS with 6 analog plugs and updated regularly.
Everything is fine from burning to playing music of any format allowed.
However, last week I tried to transfer vinyl music to my computer using Sony Sound Forge Version 8 and nothing works. Here's what I did.
- Luxman Turntable connected with ground to LINE IN ( in DENON amp ) and
- in the AUX output I have 2 Monster cables boing to my computer twinned on goldplaited /8 jack which is connected to the second (from right) LINE IN in the sound card.
This done while referring to Manual & Getting Started Demo Creative program in the software. NO SOUND AT ALL COMES IN the computer - while the music is playing qell on my audio system player.
I've done all kind of adjustment with the Microsoft Volume Play & Recording Controls and with Creative Mixer.
I can only distinguish on Sony Sound Forge two volume bars that there is some faint connection fluttering . I still tried to record but upon playback, there is no visual waving lines illustrated in SoundForge window nor sound played back. I expected that.
What am I doing wrong or is Audigy 2ZS not suitable for such ? FYI, I tried the other5 jacks on the sound car ( adjusting to WHAT U HEAR or LINE IN controls ) .
The infos in Creative manual and software demo show the 2nd jack of analog sound card from the right being used as a LINE IN for cassette, synthesizer & cd player ( Iguess it goes also for truntable ? - i tried with cd player and it does not work either )
Third jack from the right is only for microphone (also tried but does not work either).
Sorry for lenghty description, I tried all I could . Am retired 7 yrs old and i wish to transfer all my jazz vinyls to puter inorder to make cds. Kindest to All for your help. Merci beaucoup !
Connections:
Turntable_(out)-->(in)_[Denon phono input w/ RIAA preamp]_(out)-->(in)_[Audigy Line-In (see the user's guide)]
(if you want to play back through Denon amp, --> [Audigy line-out [_(out)-->(in)_[Denon line-in (playback or aux-in)].
Software settings:
Creative CT Mixer
- enable Wave and Line-In sources, set level to 50-00%
- set .Rec source to AnalogMix(), set level to 50-00%
- find the best levels (I normally have these set as: line-in = 70% (.rec = 00% if not using ASIO drivers))
SoundForge:
- (depending on device driver mode you're using and which A2ZS model you have there), set input to AnalogMix() (w/ ASIO) or just select the one meant for Line-In,
- set recording levels
jutapaMessage Edited by jutapa on 08-29-2006 09:4 AM

Audigy 2zs notebook - Can hear but NOT record effect of Graphic Equalizer

Dear people,
Audigy 2zs notebook card, using with sonar-le to record (and also with Audacity).
I can record all I play with my soft synths, and mic voice, perfectly. Various tracks simultneously.
Playback is also great.
I use sonar-le in Asio 2-Mode, and MME and all works good.
HOWEVER, I bring up the Creative equalizer, and I enable it, it makes a NOTORIOUS difference.. I can enable it while I am recording, before, or after.
So I record a track as usual, but I enable the equalizer, and I am FINDING-OUT that I can not seem to be able to RECORD the effect of the creative EQUALIZER!
Even though I can hear it in and out, big difference, the track recorded wave continues to record as if it does not see the equalizer at all.
I have tried all available inputs and many many things, but I just can not get the eq. effects to RECORD.
I have two speakers connected to the dongle that attaches to the notebook card... I have also tried using headphones, directly connected to card, and all I can think. I tried also mme mode.
I also tried audacity and same. Can't get the recording to be like what I hear with the headphones.
Why would this be? How can I solve the problem?
Thanks a lot!

neutron wrote:
Whoops!? That sequencer/recording application "Cubasis VST 4" comes packaged with Audigy 2ZS Platinum Pro but not with the Notebook soundcard. A similar product Cubasis LE comes with X-Fi Elite Pro.
I haven't seen any details of the internal layout/architecture of the sound card, but I don't think that would help you in terms of some new configurations for recording.
In terms of recording capability, since there is only one input port with the NOtebook card, you are of course fairly limited in terms of connectivity, unless you have an external mixer (if you are talking about recording two things at the same time).
However, the audio quality of the Notebook card is certainly good enough to record very good quality audio with S/N, THD etc. My opinion is that people spend way too much time fussing about specs, noise etc. where in reality, most external transducers (mics, guitars etc.) always limit the recorded quality (unless you have really good professional recording gear and you have a lot of experience.
I've heard outstanding quality recorded music made on recording gear with much poorer specs than the Notebook card.
Best thing with your Notebook card is do what you've been doing. Use it and experiment and concentrate on the music generation itself.
Thanks for the reply!
I gather that the application may not be downloadable, specially if it is third-party. I do have the Synth effect, though that I can plug into Sonar.. I like the hardware enabled effects, though, specially since my music playing/recording system is a little complex.
Yes, I do have external hardware mixers, and though there is only the mic/line input, that's not too bad since this card has MANY internal inputs and outputs that I DO USE. All? of my instruments and music is now software based..Only the Mic is external. That's why the hardware synth of the 2zs laptop is so attracti've.. It does not bear on cpu or data... That's why I asked about architecture info orient myself.
Also, I may be wrong, but I read that many of the hardware capabilities of the 2zs notebook card are no longer there on the newer cards... That effects and other things are now mostly software based? Is that so?...Can I use two cards on the laptop, the 2 zs and the express slot one simultneously and have more inputs/outputs?
I am still interested in all practical possibilities, and I do like the Creative soundcards.
The great thig is that you told me that the Eq can not be recorded, so that's very important to me.. I can still record it, though out into a second laptop via the headphone jack. But I will try the VST's I have here first and see how they feel and sound.
It really amazes me, though, that I can hear the effect, but there's no way to record it.
Maybe a new driver could do it's
Thanks and best wishes!

Creative Entertainment Center works with Audigy 2 ZS Platinum Pro

Creative doesnt seem to hav plans to release Entertainment center for Audigy 2 ZS. But theres a way to install and use Entertainment Center with AUDIGY 2 ZS Platinum/Pro. I first installed the Audigy 4 Modded PAX drivers for Audigy2 ZS with all softwares(i downloaded Audigy 4 ISO) , Then i uninstalled the drivers and reinstalled Audigy 2 ZS drivers , and again installed Entertainment Center, Guess what now Audigy 4 doesnt prompt me that i dont have the required HARD WARE before installation starts, and i can install ny Audigy 4 software(nothing much new though , only Entertainment center and Smart Recorder). and i am now enjoying ENTERTAINMENT CENTER with my Audigy 2 ZS Platinum Pro and with Audigy 2 drivers!!!!.
I think its not proper on part of CREATIVE not to release Ent. Center for Audigy 2, as the IO box and remote control of Audigy 2 and Audigy 4 are the same( RM-500 remote). so wats the point in keeping Ent. Center just for Audigy 4 and Up?

Just set your software DVD player to SPDIF output and make sure the A2ZS is set for SPIDF decode.

Hey CL, Audigy 2ZS need beta drivers/Crackling problem fixed t

:angry: Owners of Audigy 2ZS need beta driver and or fix for the crackling and popping audio problems to. My system is: ASUS A8V with latest official BIOS, ATI x850 Pro, WD SATA 250GHD, AMD A64 3700, 2x52 twinx Corsair matched memory, Antech true power 2.0, 500 Watts. I have all the latest drivers and I am running XP pro SP2. I to have the bad audio when playing games such as BF2, COD2 and UT2004. I also have bad audio when playing music through WINAMP and surfing the internet. I have no IRQ conflicts and have the beta drivers for the Audigy installed. I can reduce/eliminate the amount of popping/crackling by going into my BIOS, then save and exit.Message Edited by Dirty_Harry on 06-07-2006 09:55 AM

No it does not, as long as you do as follows: (Instructions are copied over from my previous posts on the subject)
How to manually change the Windows HAL:
Use the following command: "expand d:\i386\halacpi.dl_ c:\windows\system32\hal.dll"
Whereas: d: is your CD-ROM letter, or where you Windows XP Installation resides.
halacpi.dl_ can be any of the following depending on what you want to install:
"Standard PC", Non-ACPI PIC HAL (Hal.dll)</LI>
"MPS Uniprocessor PC", Non-ACPI APIC UP HAL (Halapic.dl_)</LI>
"MPS Multiprocessor PC", Non-ACPI APIC MP HAL (Halm
ps.
dl_)</LI>
"Advanced Configuration and Power Interface (ACPI) PC", ACPI PIC HAL (Halacpi.dl_)</LI>
"ACPI Uniprocessor PC", ACPI APIC UP HAL (Halaacpi.dl_)</LI>
"ACPI Multiprocessor PC", ACPI APIC MP HAL (Halmacpi.dl_)
</LI>
Offcourse, the HAL you should change to is Standard PC. You will lose Dual Core or HT support in the process, but I strongly believe it can help. As per above, you can switch back to your previous HAL without reinstalling. You will be most prolably asked for the drivers of your devices, but on my setup, it didn't, as they were already stored in Windows' System Folders.

Is Creative Audigy 2ZS Platinum Sound Cardcompatible with Yamaha Keyboards? (XG sound

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee

Audigy 2 card with Audigy 2 ZS drivers and Live Driv

I recently bought a Li've!Dri'veII bay for my system. To use this I plugged it into my Audigy 2 Value card which I have had for about 2 years. The bay came bundled with a SoundBlaster Li've! Platinum.
I tried to install my drivers, but as a Platinum, but the Bay still did not respond, didnt send anything out or receive a signal in. There is definitely power because when I plug in the headphones you can hear some white noise, but thats it.
I searched round for a solution and one was to install the Audigy 2 ZS drivers. I did this by following the following instructions:
http://driverheaven.net/showthread.php?s&threadid=45004
This allowed me to also enable lots of extras such as the THX console and other stuff previously unused as my Audigy 2 drivers didnt have them.
Now I have 2 problems:
) my Li've!Dri'veII Bay isn't working and
2) In games I get sound glitches such as random noises that shouldnt be there, Missing noises such as gunshots are not heard or parts of the noise are missing.
So what do I need to do to sort this out, because I do wish to be able to use my system to its full potential.
Thanks in advance to anyone who can help.

David,
If you go into the surround mixer or Windows mixer do you see a listing for the front panel inputs (line in2/mic in2, Aux 2, etc)? If so, are any of them muted? If you go to start/programs/Creative/SB Audigy/Audio HQ/Device Settings, do you show a headphone tab? If so what options are enabled in there?
Double check your ribbon cable connection and maybe even swap sides of the cable.
Jeremy

Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5

what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.

I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
I have copied the advice I received/didnt recieve from creative.
Best of luck
Dear Martin
Thanks for your reply
I am sorry for the problem you are facing.
To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe:
Original Message Follows:
Hi
I understand you must be busy, so no problem.
No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
Half life two: front left-right and centre. NO rears
Fear: Front, left, right, & centre. No rears
Farcry Front left, right & centre. No Rears
When I run your speaker test HISSSSS, No Rears, no front left or right
Beats me?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 24 January 2006 5:44
To: Martin
Dear Martin
I apologize for the delay on the answer.
If you select Dolby Prologic mode on the decoder, are you able to listen
the game audio, with EAX, in all of the speakers?
Regarding to the optional bay dri've, you can purchase it from ou
Best Regards
(Mod Note: Name Removed)
Original Message Follows:
Hello
Your email was helpful, unfortunately, not for my unit, you see I would
have
connected the Jack leads in by now if the inspire had Jack lead inputs
as
you describe
Please don't think I am being sarcastic, but from reading the
correspondence
below it would seem as if your department is having difficulty
understanding
my problem.
Also it would seem your department doesn't have the necessary technical
information on your very own product, so to help with your dilemma I
have
taken photos of the input/outputs on the Inspire unit.
You will clearly see the inspire has no inputs other than Coaxial and
Optic.
This leaves me back to my last post. I think the solution would be for
me to
purchase the correct processor, which would have come with the original
sound card had I not been a little tight on the money front.
I have attached a photo of the sound card with the processor, I would
love
to buy this processor but find myself unable to locate this product on
your
web site. Would you possibly be able to send me the correct link to this
item so I can buy this Processor Please?
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 8 January 2006 0:3
To: Martin
Subject: RE: CLE -
Dear Martin
Thanks for your reply
Your soundcard is Audigy 2 ZS
Your speaker is Creative Inspire 5. Digital 5500
You will need to have a 3:3 cable(with the color green, black, orange)
to connect your soundcard to your speaker, to achieve the 5. effects
with games.
Below is the connection:
- Connect line out jack of Audigy 2 ZS
to 'Front' of Creative Inspire 5. Digital 5500 using the green color
connection
- Connect line out 2 jack of Audigy 2 ZS
to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
connection
- Connect line out 3 jack of Audigy 2 ZS
to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
orange color connection
Once you have done the correct connection, play the game DOOM3.
Ensure you have selected either the EAX or surround option in the game
settings.
Does it work?
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
You have lost me. Your sound card clearly states that I can have EAX
surround decoding from the sound card I have purchased.
All of the games on your web site claim to give me an environmental
effect
that will blow my mind, hence EAX.
All I have done wrong is NOT buying your decoder that comes with the
sound
card. My mistake.
All I want to do is re-address this issue and buy the correct
decoder/processor.
Can you point me to the correct link on your web site so I can buy the
correct decoder/processor?
As for the PCM out of the above cables, this foxes me as my other
equipment
only use Optical cabling on my Lexicon processor and from that I have DD
7., DTS 7. and meridian 5. lossless.
My issue is more to do with NO EAX from the rear and centre channels
while
in-game.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 09:3
To: Martin
Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
Dear Martin
Thanks for your reply
All commercial digital connection eg. optical or coaxial cable will only
carry PCM stereo signal. If you want to output the signal to a surround
5. with extra EAX environment effects, it will not be possible at all
since it is only restricted to stereo channel signal.
As per current industry limitations, we are bound to follow the standard
one-signal output for all our SPDIF and Optical output jacks. This is
something that is currently shared by all vendors for all products.
Please note that all games are not dolby digital, even they are , it
will require certain motherboard to encode it to dolby digital signal,
which our soundcard does not support.
You can only use analog connections to gain true 5. surround for
gaming..
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
Hi Joong
I don't fully understand your email, but I do get the gist of what
you're
saying and understand I need to connect the analogue cable to fully
appreciate the sound in EAX.
Would you be able to tell me what product I could buy from your
catalogue
which would marry up with the sound card I have, as I understand now
that
the Inspire 5. will not do the job.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 04:00
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
Dear Martin
Thank you for the reply.
Computer games written with support for 3D audio do not require a Dolby
Digital Interacti've Content Encoder (DICE) to output multichannel sound,
with no exceptions. Sound devices that support the real time encoder
technology from Dolby will simply receive the multichannel wave file
output and encode it in real time to a somewhat modified Dolby Digital
bitstream. Creative does not support the Dolby Digital Interacti've
Content Encoder on any of its sound cards.
The only difference between a Sound Blaster card and an audio card that
has a real time encoder, is that you can make a one-wire, digital
connection from your audio card to your home theater receiver and enjoy
discrete multichannel sound from the game. However there will be a
continuous, slight delay, known as "latency", as the encoder is creating
and transmitting the bitstream, and of course the compression scheme
being used is "lossy" (i.e. not bit-accurate).
If you want to enjoy 3D audio in 3D enabled PC games in multichannel
surround sound with a Sound Blaster card, it is recommended that you
connect the analog outputs of the sound card directly to the analog
inputs of the receiver. This will require 3 cables for 5. surround
sound, one for front right and left, one for rear left and right, and
another one for front center and subwoofer. Though it requires more
cables than a real time encoder system, it will not have any latency
issues. When connecting PC audio to a home theater receiver, Creative's
latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
are likely to provide higher quality audio than any Dolby Digital real
time encode system available for the PC today.
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Please do not use this link to submit technical queries
Original Message Follows:
Hi
One particular game which has "in-game" DD is Farcry; I used this as my
benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
it
on friend's machines and they get the full surround effect so I Know
this
version is ok. I also have ALL of the game patches & updates.
I would like to point out that while playing Doom 3, Half Life 2,Fear,
Colin
McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
ops, All these games have EAX HD, which is enabled within the options
menu
"in-game", But I do not get ANY use out of the rear's and I might as
well
listen in stereo.
No, inspire 5500 does not automatically switch while "in-game" when DD
is present as you would expect, but does if it was a Movie, which makes
me
think the DD stream isn't getting to the processor.
I originally thought I could put all this to rest if I could buy the
control
panel that would have come with the Sound card if I had not tried to
save
money, but every time I search your accessories site I get completely
lost,
it really isn't user friendly, the sub-menus are very time consuming and
point you in the wrong direction because they are not categorised as Joe
public would understand
I downloaded your TEST Movies and creative demo player utility, ran it
but
still no EAX HD or DD if that were present.
I want to put this card and Processor into my boys computer (which is
the
same Spec as mine and I will update to the FX series, but I am unwilling
if
I cannot find a logical reason why this set-up cannot work first.
Would it have anything to do with the pins on the Digital out on the
sound
card plug, the one I bought and was attached to the last email? Only
sending
certain channels down to the processor?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 5 January 2006 08:09
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
Dear Martin
Thanks for your reply
Your speakers are fine as you mentioned that there is sound from all the
speakers when you are playing movie.
May i know what game are you playing when there are no sound from the
rear speakers?
Have you done the appropriate settings in the game to achieve the 5.
sound?
Is there any game patches that you will need to update?
Does the Dolby Digital LED light up when you are playing the game?
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Servic
Original Message Follows:
Hi
I am sorry; I should have said the Inspire 5. was model number digital
5500
S/N SW330030026.
The inspire has these connection on the back of the processor
>From top/back of unit
Audio Outputs
Front
Rear
Centre/subwoofer
Audio inputs
Audio line in
Coaxial
Optical
DIN
The Din to a remotely located Subwoofer which has the speaker leads
inputting into it. Plus power.
Attached is the creative view of the controls menu and I have attached
the
invoice I was sent, it shows the lead I was told to fit.
As I said, I can now hear DD5. while within a movie from ALL speakers
BUT
no sound from rears during IN GAME DD5.
I do not use this PC for films only games.
Regards
Martin
If you are having a digital connection, it is normal for only get only
front left/right is you use the speaker test option.
http://us.creative.com/support/kb/article.asp?l=3&sid=4858
Speaker test only outputs from two front speakers?
You mentioned that that you are unable to get any sound from the rear
speakers when playing game right? May i know are you using a digital
connection? May i know what speaker settings have been made under
Creative Speaker settings?
Do get back to me on the above.
Thanks
Original Message Follows:
Operating System: Windows XP Professional x64 Edition
Creative Model Number: SBO 350
Computer Brand/Model: home made
Processor/CPU: AMD 64
Memory: Gig DDR 4
BIOS Type/Revision: 5. 39
System Board/Chipset: ASUS A8N-SLI Deluxe
Detailed Problem Description:
I have the above Sound card.
I also own Inspire 5. amp/processor
I Wanted to save money by connecting above sound
card to amp/processor
Connections on sound card made life very difficult
I contacted Creative for help. you told me to buy
an RCA to mini jack cord which also has other connections, from your
web site, (I tried to find
the product number for you, but your sub-menu
system is so poor I couldn't locate the RCA/mini
3.5 /to phono link for you) this cord connects
directly into the digital in, on the sound card (3.5 Mini jack) to the
coaxial input on the
inspire 5. amp/processor.
I have enabled ALL sp-diff settings and digital in
setting on every program/utility/kitchen sink and all.
I have an SP-Diff wire from DVD burner to creative
sound card, and yes its enabled and digital only
is selected.
I can play a DVD and see the inspire 5.
automatically change from Pro-logic to Dolby
digital when it See's an AC-3 stream.
when I try and play ANY game you say has EAX
,2,3,4 I cannot get any sound from my rear
speakers (see above in Dolby Digital ALL speakers
work correctly)
when I enter the set-up menu within the creative
software you supply with the sound card and select
5. speaker, digital only, test the speakers via
the white noise function, all i hear is left and
right noise. no centre, no rears.
I phoned you tech support line, the boy on the
phone didn't have much of a clue about your
product and I had to tell him what connections sit
on the inspire 5. series amp/processor.
I want to build another PC for my son, I want to
add the FX series sound card and amp, but i am not
willing to buy anything until i feel you have
helped me to solve this problem first.
please can you help, I am at the end of my tether
with this sound card.
kind regards
Martin Waite
Message Edited by Daniel-CL on 0-28-2006 :36 PM

Vista Drivers for the Audigy 2ZS Video Editor

OK, so I know I'm only one of 20 people in the world who were ever stupid enough to buy one; but I am disappointed to see that there is so far no Vista beta driver support for the device.
Are there plans to ever support it under Vista?
As half of the internals are an Audigy 2ZS sound card for which Creative are developing Vista drivers, the job is surely half done? Modifying the existing USB video capture driver surely can't be too difficult?
Must say, that if this device is ignored under Vista, it will be the last Creative product I ever buy .....
Nigel

I wish someone from Creative would give a definiti've answer to this question.
I've had the Video Editor for about a year so it's hardly old technology, and Vista was in development last Summer. The Audigy ZS sound drivers are being developed for Vista, how diffcult can it be to get the Video drivers modified to run under Vista?
Nigel

Audigy 2ZS Platinum Pro - ...trying to record with Videostudio, Virtual VCR, Roxio DVD Builder

...just bought (and installed) a SoundBlaster Audigy 2ZS Platinum Pro - the one with the "breakout box" - to replace the on-board Dell audio sound system, which seems to have died after 4 months.
I am able to get good, clear sound from any and all applications that use "playback" audio.
At present, I can get "playback sound" from one program feature that came with my capture device - an Aver Media USB 300, which was plugged in to the "Line in 2" socket on the break out box. Then I tried to record with it... - "Record Operation Failure!" I'm stilll waiting to see what responses I get from the Aver message board in that regard.
Then I tried recording video (and the accompanying audio) with Ulead Videostudio 8, Virtual VCR, and Roxio DVD Builder, none of which could record sound, even in "preview mode". Before the on board sound system stopped functioning, those features worked on all of the above programs except for Virtual VCR, which I hadn't yet installed or tried out.
I've checked the Play/Record Volume Control in "Accessories/Entertainment" and the Line 2 is activated and selected. I've tried plugging in to Line /Mic but that hasn't worked either. I need to go to Radio Shack to get an adapter to plug in to Line 3 and give that a try.
But before I spend even more money, have you ever seen anything like this?
- Jeff.

Jorge,
Thanks kindly for the suggestion, during the installation it did not complain about this patch being installed allready, I'll give this one more shot and see if it persits.
I ran memtest on the machine (10 cycles) wow this thing (G5) is loud in single user mode. I guess the fans don't have power management enabled.
I'm guessing that the issue is from lack of RAM, (512) but I am not 100% on this. Though my research points towards that, It's kind of odd that an app would reach into some other memory segment.
Thank You Again.
I throught all Tiger updates would be obtainable via "Software Update" . I should have searched support.apple.com first.
Quad G5 Mac OS X (10.4.7) 512MB Ram (Stock Config)

Want to connect Audigy 2zs gamer with digital so

Ok I have the audigy 2zs gamer, and the gigaworks 750 7. surround sound.
I also have hdtv cable box with digital out, and optical digital out.
I have ps3 (obviously with blu-ray) and xbox 360, both of which have a optical digital out.
I want to be able to connect to these, but I guess the only inputs ( on pod, and on card) are analog only.
My question is. Is there any way to do this. I see a digital i/o box, but I don't think it's compatible. It says it is with the value model, but not the regular 2zs gamer one?
So do I have to buy a newer sound card, or can I use this one as is, or with the digital i/o box to make it work.
I don't care about having multiple connections, I can make do with having only connected at a time.
Thank You

I guess what can solve one of the problems is.
If I use a digital out (4 pin minipole connecter) from my cable box to the line in of the 2zs board, will it accept it...or is the line in for the 2zs analog only?

SB Audigy 2ZS clicking quest

Before I go through the hassle of tweaking all kinds of settings in windows and scrubbing and reinstall drivers (and thereby getting progressi'vely more frustrated), I want to see if anyone else has had the same problem I am and if they found a solid solution.
I have an Intel P4 based machine with a gugabyte 8KNXP mobo. The only cards in my machine are an ATI Radeon All-In-Wonder 9800 PRO, and my Audigy 2ZS. The vid card is riding in the AGP slot, and I have moved my sound card to every PCI slot except the one next to the video card due to heat reasons.
My sound is perfectly fine whenever I am not gaming. When it does act up, I do not get the crackling I have heard posted here by other people. What I get is a very regular click/pop. It is very sudden, very short, and *very* regular. The clicks are usually about a second and a half apart. The clicking isn't always present. It will come and go. When it shows up, it usually continues until I shut the game down, although there are cases when it will just suddenly stop and everything is ok again.
I have had this problem playing online games. WoW, EQ2, EVE, GuildWars, etc... Non-network games don't give me this problem.
The obvious assumption here is that it is network related. My motherboards onboard network controller is on IRQ 8. My audigy is on IRQ 22. No conflict there.
Has anyone experienced a similar problem?

Hello,
Thanks for the reply! In surround mixer, under source, I do see the last slide on the right is mic, but there isn't a mute option under the slide. I tried moving the slide all the way down, but that didn't help. Any other ideas? I'm desperate!!!!!!! Need communication during game!! Thanks

5.1 Help with Audigy 2

I have an Audigy 2 ZS Platnium Pro and I recently upgraded to the latest drivers, bad mistake as I am having heck now trying to get everything work right again. I have Logitech Z-680 5. speaker setup. Before the upgrade in drivers, my settings were working the way I wanted to, the sound was working just fine. After the upgrade however, for some reason the newer drivers did something and messed up settings (restoring to defaults doesn't resolve the issues I am going to explain)?In World of Warcraft, the sounds seem far more distant and quiet than before, throwing me completely off. In the Speaker Test, when I choose that, I hear sound out of only the front and center channels only. Now I know the rear work because when I listen to music I can hear it via CMSS. The Windows control pannel and Creative's are both set to 5.. I tried the speaker calibration which correctly produces the right sound output and it has no effect when I enable the calibration. This boggles me on how the sound comes from the front and center (when it tests the rear, it plays through the fronts instead) but obviously the rears work cause I can hear sound while playing music. The speakers are setup for 6 Channel Direct which is the mode needed for 5. sound from a card like the Audigy. I have rolled back to previous driver version and still have the same thing. I am stuck with the weird 5. setup and it wont' go away even if I uninstall all the Creative drivers and apps and reinstall them. This is very frustrating and I don't want to have to do a clean install this close to Vista just because Creative's poor excuse for software decides to take a weird turn and not work right (who would've thought, eh?)?I'm about ready to turn on the onboard audio for the A8N-SLI Deluxe as it will probably work correctly. I"ll probably wipe Vista RC2 off ther other HDD and test if a clean install with the new drivers (or old) will work fine, they should. It should not be a hardware problem as the ports clearly work, just the software does not want to work! I just want my sound working properly again, sucks I have to go through a bunch of BS because drivers hosed how the system is working.

Just an update, did a fresh install of MCE2005 and the sound works fine, completely uninstalled everything on my current install, drivers, apps, etc, and installed them just like I did on the new install, and still have the same problems. I even used Driver Cleaner to make sure?I wiped out everything, it has to be a setting or something just laying around that I can't get rid of without doing a complete reinstall, unless some application is messing with it that's installed on my current install but I don't know what that would be.

[Soundblaster Audigy 2ZS] Sound cutting out in middle of gamepl

I have Vista, and I never had this problem with XP.
I downloaded the Vista drivers and have ran Windows Update for all the missing drivers.
When I run dxdiag.exe
I go to the sound tabs and find this.
The file ctaud2k.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
For Sound
and Sound 2
Sound 3 says everythign is fine.

I've found that Audigy series cards "cut out" if you alter speaker properties in Vista Control Panel.
Creative umm... bug I think that's what they call it...
For example
I find 6bit, 48000 Hz (DVD Quality) is the highest quality I can set.
I've seen it on Audigy 2, Audigy 2ZS and Audigy 4. Win32 and Win 64.
Is your adapter set to studio quality If so - that's most probably it.
Hope this helps.

Frustrated with Audigy 2zs drivers

Similar Messages

Maybe you are looking for