Frustrated with installation of CS6

I have successfully downloaded CS6- please tell me the next step to actually install the programs- I have unzipped the files and tried to install the Windows installer packages it gives me a message "Please install PDF Settings CS6 using Setup.exe"; I try the set-up.exe and get the installer failed to initialize. This could be due to a missing file, please download Adobe support Advisor to detect the problem. I try to download the adobe support adviser and IT has BEEN DISCONTINUED?!?!?
1. I need the steps to actually install CS6
2. is its possible to get the CS6 installation disc??

adobe installation files should not be 'unzipped'.
for windows you often download an exe and a matching 7z file. the exe extracts the 7z files and starts the installation process.
for more specific help, what cs6 suite/program are you trying to install?
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Similar Messages

I need help with installation of CS6

Hello,
I have been using CS6 on my PC laptop, finally I have upgraded to a Mac, however the veriosn of CS6 that I have is for windows, can someone please tell me how to install this for Mac?
Thanks in advance,
Tom

http://kb2.adobe.com/cps/405/kb405819.html
Mylenium

Problems with Adobe Speedgrade CS6 in Windows 7

I am having problem with Adobe Speedgrade CS6 on my Windows 7 machine with the following specs:
Windows 7 Ultimate SP1
Gateway FX 6800-01e
2.67 GHz i7 Quad-core processor
16.0 GB RAM
750GB primary hard drive (Seagate ST3750528AS)
2 - 2TB secondary hotswap drives
NVidia Quadro 4000 w 2GB dedicated RAM
2 Acer 231SHL HD monitors running in extended dual screen mode
Adobe Speedgrade 6.0.4x25
It takes almost 3 minutes to open and when it does open it is slow to respond. After trying to troubleshoot it through driver updates, etc., I have done a totally clean reinstall of Windows 7, updated drivers where applicable, and disabled all malware and antivirus protection to rule out interference. I have also tried uninstalling it and reinstalling it. I have also applied the latest update through the program interface. The other components of the suite I have installed are:
Premiere Pro CS6
After Effect CS6
Acrobat XI
Audition
Bridge
Photoshop (32-bit and 64-bit versions)
Lightroom 4.3
Prelude
The other components, including Premiere and After Effects open fine with no problem. I would appreciate any assistance with this problem that might be offered, as I am frustrated and stumped. Thanks in advance!
-Carl Hayes
"What we have here is failure to communicate." - Strother Martin as Captain in Cool Hand Luke.

Hi,
Have you get rid of the problem ?
I've got almost the same problem. Every program from adobe production premium are working fine, but when I start movie on speedgrade windows blows off.
It's on windows 7 pro.
Thanks in advance

Why do arrow keys stop working with type in CS6

I searched this issue and found many forums discussing the topic, but no solution. When using PS CS6, the arrow keys randomly stop working when navigating around in text. This is extremely frustrating. Per other discussions, and my experience, there doesn't seem to be a constant trigger. Saving the PS file when it happens SEEMS to fix it - at least temporarily. It's been happening off and on since I upgraded.
Adobe reps (they're say "employee") monitoring the photoshop.com forums suggested the fix is to close all other apps. No one works that way. Chrome (or other browsers) were speculated to be the cause. but I just had this happen without any browser open.
Any insight would be greatly appreciated. It's the simple things that cause the most frustration.
Sysytem details:
CS6 upgrade form CS5 Premium
Lion 10.7.4 / 16G / i7 Intel
Safari / Chrome
MS Office
Mac Mail
FontAgent Pro

Nobody suggested that closing other apps was fix - that was just a test to determine which apps were causing problems with event handling that prevented Photoshop from correctly handling the key events.
And if there were already posts on this topic, why did you create a new topic on the same thing?

ACROBAT STARTUP SCRIPTING NOT WORKING (with extendscript Tooklkit CS6)

Hi
I experienced in programming, but newbie in JS-Scripting in CS6.
I have developed some scripts in the console of Acrobat XI Pro, now I wan't to install that global script callable by a menu.
I work on Windows-7, with 64bit:
The script path is:
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Javascripts
script name is Confg.js
The script is created with Extendscript Tooklkit CS6 editor
only contains this line:
app.alert("Hi, from a globally executed script");
I expect that an alert is poping up, when I open the Acrobat XI Pro with any PDF-File:
for a change
app.addMenuItem({cName:"Menu Test", cParent: "Help", cExec: "app.alert('Menu Item Test'); "});
doesn't work either
after opening PDF XI Pro with an arbitry PDF I get an error in the console:
Acrobat – Version mit integrierten EScript-Funktionen 11.0
Acrobat SOAP 11.0
SyntaxError: illegal character
1:Folder-Level:App:Config.js
If I create the file with a plain text editor, things will work fine, as expected.
If I edit that clean file with Extendscript Tooklkit CS6 editor again the file is corrupted. This is rahter clumsy. Any solution, so I can work with Extendscript Tooklkit CS6 editor?

Thanks for the reply.
>>Acrobat is not one of listed programs that Extendscript is used with.
I was already wondering about this. Thought my installation is corrupted or whatever
Though with regret, I have to accept that Extendscript Toolkit can't be used with Acrobat XI scripting. I use jEdit meanwhile. This has syntax higlighting and a linenumbering, helpful to spot errorous linenumbers. This does the job so far.

I need Encore CS6 and it is not available on Creative Cloud. Neither is Premier Pro CS6 which supposedly installs Encore CS6. I need to burn a DVD from my mpeg4 output from Premier Pro CC2014. What should I do?

I need Encore CS6 and it is not available on Creative Cloud. Neither is Premier Pro CS6 which supposedly installs Encore CS6. I need to burn a DVD from my mpeg4 output from Premier Pro CC2014. What should I do?

You should probably post your question about burning a DVD from Premiere Pro in the Premiere Pro forum
Here is a link to info regrding getting CS6 applicarions thru the Cloud with a full subscription...
Get CS6 Apps from Cloud Subscription:
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

Frustrated with Audigy 2zs drivers

"Frustrated with Audigy 2zs drivers\ Hi,
I really need some help with drivers for my Aud 2 ZS Plant card as i am very frustrated. A couple of months ago I reformatted my HD and subsequently re-installed all my drivers. When I was ready to install my soundcard drivers\software I could not find my installization disc as I moved to a new place 6 months ago and I guess they got lost in the unpacking. Since then I have tried to find drivers for my card and in the process have?used 3rd party drivers ie. KX, PAX, and daniel_k but could not get them working or they (KX) were hard to understand. Anyway, I am to the point now that I just want to have sound with functioning software where I can get back to doing some hobbyist home recording as I did before with orginal drivers. In saying that, can anyone please point me in the direction to find the most up to date drivers for my card? Iam running WIN XP Pro sp3. I am to the point now that I want to take the card and front dri've bay out of my system, chuck it, and go and buy a $20.00 generic card.
Help would be much appreciated.
Tappy

If you want the latest drivers I'd use Dan K's if I were. None of the old software works with the latest drivers so you're kinda stuffed. Dan K's are based on the 2.8.000 drivers which are the second to latest drivers available. Don't use the 2.8.00 drivers - they cause more problems than they solve.
Before installing any more drivers/software it might be an idea to make sure there's nothing left of any previous drivers you've tried to install. Could be what's causing the problems.
This is how I remove my drivers. May seam a little convoluted but in your case it may prove useful to be as thorough as possible.
You'll need Driver Sweeper, and CCleaner, 7Zip and Dan K's Audigy Support Pack 2.0 (if you don't already have them).
Download these and install; Driver Sweeper, CCleaner and 7Zip.
Now you need to extract all the files out of Dan K's support pack, which should be an *.exe file. You need what's inside that *.exe file. After installing 7Zip, you should see a new 7Zip options menu when you right click on files or folders?
Click on it and then select Extract files to Audigy Support Pack... or something similar. Don't just select Extract files.
Inside the new folder that should have appeared after 7Zip extracted everything, you'll see another folder named Drivers.
Copy this folder to your desktop.
Now reboot and start Windows in safe mode.
Click Start then Run and type cmd.exe to open a command prompt, then type (minus quotes):
" takeown /f C:\Windows\*.cdf " and hit enter, then:
" cacls C:\Windows\*.cdf /G *insert your logon name*:F " and select Y and hit enter again.
You can now close down that command prompt window.
Go in to the Drivers folder you copied to your desktop and run Setup.exe and this should appear:
<img border="0" src="http://theliability.googlepages.com/creative_uninstaller.png">
Select the same options as above and click OK and let it do it's thing - when it says reboot your PC click No or Cancel.
Now run Driver Sweeper and do a scan for all Creative drivers then click Clean.
Don't worry if it says things like file doesn't exist or some other error msg. It'll still get a few things.
No load up Add or Remove Programs (personally I prefer Revo Uninstaller) and remove anything related to Creative.
Finally load CCleaner and scan/clean your registery.
Reboot back in to normal Windows.
And that's it. A tedious process I know, but it's the only way I've found of properly stripping CLs drivers out.
You'll know if it's worked because when you now go and install Dan K's pack the installer should just run straight through. When there's still driver remnants the installer always says it's found previous drivers and need to uninstall them and reboot.
tbh I recommend running through this process regardless of wether or not your choose to stick with the old drivers or go with the newer ones.
Creative's drivers are infamous i'm afraid and at least after this your PC should be relati'vely clear or remnants.
Message Edited by Meocene on 07-23-2009 07:08 [email protected]

I am trying to download & install Photoshop 6 but setup fails with "Installer failed to initialize

I am trying to download & install Photoshop 6 but setup fails with "Installer failed to initialize Download Adobe Support Advisor" I then downloaded and ran the Support Advisor; it reported NO problems.
I can still can not load Photoshop 6!

Lw_jr01 to clarify when you are trying to install Photoshop CS6 you are receving the error message that the, "Installer Failed to Initialize." Is that correct? If so which operating system are you using?

Peut-on installer illustration CS6 pour PC sur mon nouveau iMac ?

Peut-on installer illustration CS6 pour PC sur mon nouveau iMac ?

Activation has nothing to do with your serial number. Read:
Activation, deactivation | Adobe products
Mylenium

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS6 on two computers and it works fine on one of them. I have tried to reinstall it without succeeding to fix the problem. Does anyone have the same problem and a solution to it?
"Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation."

You must have a Mac. Try this.
Quit Bridge, from user library (NOT system and root library) preferences folder find and delete the com.adobe.bridge5.plist file manual. Do this also in same user library caches folder (Caches/Adobe/Bridge CS6) and inhere find and the folder called 'cache' and drag it to the trash.
restart Bridge holding down option key and choose reset preferences, then try again.

I am unable to capture using Matrox MXO2 LE with Preimere Pro CS6 and Windows 8

I have a Matrox MXO2 LE and trying to capture with Preimere Pro CS6. My OS is Windows 8 and it sees my Matrox Device via my device managers. No option comes up in CS6 to allow me to actually capture. I am a new beginner with both Matorx and Preimere so learning on the way.
Background Information:
I have a Datavideo SE 600 Switcher (SD) and it is connected to the Matrox. I am trying to capture into Preimere Pro so that we can make DVDs instanly after service, we are a church. I am able to capture using Adobe Live Media Encoder for Live streaming but not Preimere Pro CS6.

Check with Matrox... ask 2 things
1-do you have a device driver that is "certified" for PProCS6?
2-do you have a device driver that is "certified" for Windows 8?
The only NATIVE support in Premiere (any version) is Firewire

Problem with installation on PIV

I have a problem with installation Oracle 9.0.1 database on my
RedHat 7.1 and 7.2 dist.
My machine is PIV 1.4/768MB/40Gb
On PIII 933/786/40 everethin works fine.
Where is solution for my problem ??

Hello,
PIV isn't problem on Linux. (I am tried)
What is your problem ?
regards
peco

Problem with installation - Augigy

I have a problem with installation on 32bit Vista. Im downloaded newest drivers (SB24_VTDRV_LB__04_0077) and when the installation start, i receive message "A higher version of driver is found in your system, installation will abort.".
Help?

same problem here, is there a possibility zu force installation?

Problem with installation and activation

Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]

I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>>

I have a problem with my photoshop CS6 retina display

I have a problem with my photoshop CS6 retina display. my photoshop doesn't support retina on my Macbook pro 15 retina. the version I have in my laptop is 13.0v. I was trying to update to 13.1 from my photoshop through > help > update but this option is off. it is appear gray color. I couldn't click on it. please help me.

Mac Perpetual CS6 current version is 13.0.6 the subscription version is version 13.1.2. How are you trying to update to 13.1.?? do you have a Creative Cloud Subscription?
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Frustrated with installation of CS6

Similar Messages

Maybe you are looking for