Frustrated - Z3 Main Screen peeling off on right end corner in 2 months time.
It is So disappointing that within 3 months from the date of purchase.. my Z3 main screen had popped out of the body on the right top end corner. Given it to servie center yesterday ( 29.5.2015), service center authorities have examined my phone and approved there is no physical damage and accepted it absolutely a manufacturing defect.
What more disappointing is, it takes 20-30 days to reapir my phone. so called big brand SONY has to fix this kind of problem. It is so Embarassing to face fellow colleagues when they had gone for Apple by spending similar money I belived SONY is equally a quality based company and bought Z3. But it proved wrong and disappointing for me now.
Waiting for reply from SONY.
You should Contact Sony Xperia Support.
http://support.sonymobile.com/global-en/contactUs/
Similar Messages
-
Blackberry Playbook Rubber Seal around Screen Peeling off after 10 months
I have BBPB after 10 months its rubber seal around screen is pealing off. How can I get it fixed. will RIm or blackberry fix it because it is still in warranty? what should I do.
Hello bbcaresno,
Welcome to the forums.
You are going to want to contact your point of sale regarding what options you have. Your point of sale handles all warranty claims.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Total frustration - no main screen, no thought
I can't believe I'm at this computer for two days and can't get much of anything done. This iTunes seems to be only for music, and email addresses, pictures, etc is an afterthought.
The Screen is NOT what is in instructions
"Select the iPod touch in the iTunes source list" IT IS NOT THERE!!!
I seem to be able to get the the summary and other pages only by shutting down the software and restarting it clicking on things before they disappear.
Apple USED to be intuitive. This is GARBAGE. Sell it as an mp3 player, not as email and pictures --- or give us a software that is written for that purpose!!!
Give me an icon to sync emails!
Give me a way to add things instead of erasing things!
And write a decent instruction sheet instead of 98 pages of garbage and marketing slop.
Is there anyone who can put this in real language?
and put a decent interface in the software?Dude, chill. The iPod IS only an MP3 Player, except it has added a few niceties.
Besides, no one from apple will hear you here, since this is a non-moderated user-to-user forum.
If you want to tell Apple, go to www.apple.com/feedback
Don't expect them to answer, though.
However, I'm sorry to hear you're having problems with your iPod, I hope they'll clear up. -
This issue has not happened before and just started yesterday. I have not installed any new programs and have no idea what may have triggered it. The program is running - I just cant see it.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
So, I dropped my phone and the screen popped out. Not fully only in the corner. I haven't had my phone for very long. If I take it to the apple store can they fix it? Or should I take it to my carrier?
Hi, this happened to me! I made an appt with the apple store and they fixed it for me in like 5 minutes for no charge
-
Main screen OFF, while External Screen ON
Hi,
How can I turn my iMac's main screen completely OFF, when I'm watching a movie on my external 1080p TV, so the iMac won't dim annoyingly next to it?
please skip "cover with", "set background", "lower brightness", "turn iMac", "crackopen iMac" and "why do you get an iMac if.." answers,
I'd like the main screen absolutely OFF, while the stuff runs on the external screen..
there has to be a solution for this basic function in OSX, it's 4-5 clicks in Windows, but I'm an Apple newbie..
Thanks in advance for your answers!
SteveNo you can not just turn off the iMac's display.
Everyone here in the Forum is a Mac user just like you, if you are annoyed or discontented please contact Apple > http://www.apple.com/contact/
There is a third party Utility called Shades that will independently dim either Display to black in Extended Desktop Mode. > http://www.versiontracker.com/dyn/moreinfo/macosx/31515 -
I recently got a new display for my MBP. It's been working fine, however, the aluminum bezel has almost completely peeled off. I duct taped it for the time being but I'm afraid that it isn't working and is a danger to my screen.
This is what I mean. The left side is the worst, and the bottom right corner is peeling so badly that the entire bottom section of my border is almost off completely.
Is there anyway that I can get this fixed? I'm sick of looking at tape.If the repair was recent (within 6 months) and a bezel which is not something you would play with is pulling off, then either the product they used or their methods was at fault. Either way, I would not consider 8 months (or less) to be a reasonable time for their repair to fail. My MBP is over a year old and the bezel is still intact.
-
What is the little Firefox instance peeking in on the lower right-hand corner of the desktop?
When I try to minimize the Firefox Window it goes into a cycle of minimizing and reopening. This will not stop until I close that little instance mostly off-screen in the lower right-hand corner.
The toolbar at the bottom of the desktop shows two instances of Firefox. When the main instance is in this cycling mode (about one cycle per second) I can use the toolbar to select the off-screen instance and close it. Then the cycling stops.No need to post twice - see my answer at your first (or second?) question...
Clinton -
my screen turns white and my functions lag on me for instence i try going to my ipod and it turns on but then turns right off going back to main screen. when i click on my settings it takes forever to open up, if opening at all.
Restore the phone --> http://support.apple.com/kb/HT1808
If this does not resolve the problem you have a hardware problem. -
I cannot get skype to stay on the main screen it will show up on the bottom in a small window , when I click on it the window shoots off to the right of the screen any thoughts?
smokeyjoe01 wrote:
I cannot get skype to stay on the main screen it will show up on the bottom in a small window , when I click on it the window shoots off to the right of the screen any thoughts?
Hi,
Do you WANT to view other screen DON'T you ?
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Turn off Main Screen While Using External
i hate that i cant figure this out LOL
i have my intel imac hooked to a 52"lcd that i watch movies on and i want to turn off the imac screen because it sits right next my lcd and prevents me from having a nice dark room for movies.
i am currently covering it with a t-shirt hahaha
anyone know how i can have it play on the lcd but shut off the main monitor?
i am not using mirroring so i would think that i should somehow be able to shut off the main screen and keep the movie playing on the external.
thanksHi fletch3333
Try Shades in extended desktop mode it will allow you to dim either display to any level you want. Go to the Shades preference panel and check the box "Constrain to it's own screen" and you should get a brightness icon on the menu bar for each display.
http://www.versiontracker.com/dyn/moreinfo/macosx/31515
Dennis -
Which case WON'T peel off my GhostArmor screen protector!?
I know there's a lot of discussion about this already, but I was wondering if anyone has advice on which free case to go with that hopefully will NOT peel off the corners of my Ghost Armor full body protector. I have tried NUMEROUS silicone cases so far, off-brands i can't remember, but from Best Buy. They all have peeled the corners off my front & back protectors!!! SO annoying since the Ghost Armor cost me about $35. I can easily replace each side for only $5 but I want to do that after I finally settle on a case. I've been going without a case, just the Ghost Armor, and have fallen in love with the sleekness of it.
HOWEVER i did drop my phone already and actually chipped the corner a little. Not a biggie, i'm prone to doing that kind of stuff.
I like the look of the Griffin Motif Diamonds/Smoke. I previously owned a case like this i bought from Apple in June for my 3Gs, and it's edges were so smooth, not sharp, that my screen protector never peeled. My old diamond case had smaller diamonds so it "sparkled" more, not like these big huge obvious diamonds. Leaning toward this one since I liked my old one so much, but it wasn't a Griffin. I have bought a pink silicone diamond case from best buy, and it was soooo hard and it peeled the edges right back. Also left an indent/impression of the diamond designs on the back protector. eeew.
Also looking at the bumper, but bummed because it's only in black - then i'd have a super plain black phone. However, all i seem to need is something rubber around the edges when i drop it! LOL
The Speck fabric/hard case is cool, but it looks a little too bulky.
The Incase snap cases are neat looking also- and i'm thinking the snap design would be easier on protectors....?? But they're just a tad boring.
Decisions, decisions....Any advice or thoughts are much appreciated!I didn't like the anti-glare one I bought from ebay, took the beauty from the screen. So I had ZAGG put on, at best buy. I was told to wait 24 hrs before putting the gel case back on and so I did... I put it back on perfectly and guess what? Within like 10 mins the corners started to get bubbles. I was so mad! Ugh so I returned it and got a refund but minus the $7.99 best buy charges to put on the protector. I was ripped off and lied to! I would like to know also which screen protector will stand a case on? I never had problems with the regular clear ones that r like a sticker.. I just wanted extra protection for my iphone 4.
-
It turns off many apps at random times.
Plus, it won't let me go to the next level of Plants and Zombies! I've played the same level about 15 times... it goes all the way through the level and then cuts out when it is giving me extra points for my lawn mowers. Then it goes to the main screen... then when I go back into the game... I'm at the beginning of the level all over again!
No fun!I'm unsure what you mean but "factory reset" but first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this. -
Whenever my Imac sleeps, my screen freezes/cursor "peels" off current screen
Since downloading Moutain Lion (10.8.1) after my computer goes to "sleep", when I awake it, the screen is frozen. The cursor does not operate correctly, rather it peels off the screen, revealing a screen underneath. I have to restart to resume normal operation. One very friendly Apple support staff had me verify disk and address permissions; it did not help. Another seemed confused by my question and wasn't helpful. Any ideas?
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I updated my ipad2 to ios7 and restored backup. My apps now ask for my Apple ID and password. It then goes right back to main screen without opening. Help please
- Try going to Setings>Store and sign out of the account and then sign back in.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
Maybe you are looking for
-
How to find out wheter user is using WINGUI or SAPGUI
Is there any ABAP function module or clsas method to check the GUI TYPE? I'd like to know whether the end user is using WINGUI or SAPGUI.
-
My iPod had an error and I attempted to restore the iPod to factory defaults. It was able to empty the iPod of the software on it, but it has yet to be able to successfully restore the iPod. It goes through all the steps successfully until it gets
-
Version Control with JDeveloper
Does any one know what version control packages can be used with JDeveloper? If you do, would you please let me know where I can get info on them. Thank you
-
CE CAF Business Object, Complex Structure and external service...
Hi, I want to use a web service as remote persistence in a CAF business object(Entity service). My Problem is, that the service returns a list of objects. But it seems that in the new CE the paradigm for caf changed a little and instead of complex at
-
0x80029C4A (TYPE_E_CANTLOADLIBRARY)
After installing my application (the installation log looks fine), a particular client (US Military) received the following error when trying to start my application: System.InvalidCastException: Unable to cast COM object of type 'Microsoft.Office.In