Frustrating problem with Bridge 6.1.0

I have been experiencing a frustrating problem with Bridge 6.1.0 and previous versions. Soemtimes when I save a file to a particular folder, the file is present in the Finder window, but is not visible in Bridge. If I move the file from Finder to Bridge by draging it there, then it shows up but it is so frustrating to have to do it this way. I have tried to use the «Refresh» function in Bridge but that does not help. All scripts are turned on in Preferences- I have Mac OS X 10.9.4

The current version will not run on Mac OS 10.6.8. Thanks for any assistance.
The easiest way would be to update to at least 10.7.5 (supported on most older Macs) but maybe you have strong reasons not to do so, however it will put you in to more trouble in the future because newer applications have more often the habit of not being able to support older OS versions due to limitations of this old OS.
Here is the announcement of Adobe:
http://blogs.adobe.com/creativecloud/moving-ahead-with-mac-os-x-10-7-and-higher/
However PS CC should still work on your system and otherwise CS6 should. As a cloud subscriber you still have access to both CC and CS6 on the Adobe CC download pages. But only PS is a major upgrade (changed to version 2014) and Bridge has just a minor update and should still work on 10.6.8 I would think?
Installing the updates and upgrades did not remove or uninstall the CC versions of PS, otherwise use CC application to install CC again.

Similar Messages

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

Problem with Bridge CC Update

I always get an error message (49).See picture below. But at the same time a had no problems with the update for Photoshop CC 2014. so whats the problem with Bridge CC?

Hi Robert,
Please refer to the link below:
Getting Download Error 49 Bridge Cc
Regards,
Sheena

Problem with Bridge CC

When I open my cr2 files in bridge cc they are opened in CS6 instead of in CC as before. I have recently uninstaled CS5 which I never use. Also when I open my jpeg files in bridge and photshop cc they are opened in another program. Please does anyone have a solution to this

Thanks for the prompt reply. This seems to have solved the problem.
Ursprungligt meddelande----
Från: [email protected]
Datum: 2013-12-01 01:24
Till: "norman_nichols"<[email protected]>
Ärende: problem with Bridge CC
Re: problem with Bridge CC created by Curt Y in Bridge General Discussion - View the full discussion
By uninstalling the previous version you have fouled up the file association. You can try the manual method of preferences/file type assoications and changing the default. If this does not work there are other ways that involve more work.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5888291#5888291
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5888291#5888291
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5888291#5888291. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Thoroughly frustrating problem with Preview

Hi,
I'm new to the forum and tried to hold out as long as possible, but the problem I'm having has so thoroughly frustrated me I had to post this. Let me try to be as clear as possible.
I have a Mac (OS 10.8.2, upgraded from a late-2009 Macbook running Snow Leopard - 2.26 GHz Intel Core 2 Duo, 4 gb RAM, 1067 MHz DDR3). I have Adobe Acrobat Pro XI installed. I also have Microsoft Office 2011. Both Acrobat, M. Office, and all my software is fully updated and current. I have no font conflicts, as I have just clean re-installed my OS because this problem is so frustrating.
The issue is with pdfs I make of books I own. Sometimes I will use my iphone 4 (latest iOS 6.1.2) with apps like "CamScanner+" or "GeniusScan+" to copy chapters and make pdfs. (CamScanner+ has built in OCR capability.) I then upload them to my WebDAV bibliography storage cloud on Box.net to access from my Mac laptop. Sometimes I use the University's big overhead scanner to make monochrome pdfs, and run OCR thru Acrobat Pro XI. Sometimes I will use the Canon scanners in the computer labs, and do OCR in Acrobat Pro XI then. In each case, I use Zotero to handle attaching pdfs to bib entries and sync it all up to my WebDAV account. (Zotero has a plugin I use called "Zotfile," which also allows one to extract notes, highlighting, annotations, etc., and store them on Zotero while also keeping them on the pdf.) In either case, though, I always run the pdf thru Acrobat Pro XI to optimize, at the least.
When I access the pdfs for notetaking, research, etc., I tend to use Mac's Preview built-in app. I find it easier to streamline, scroll, view and add notes, less clutery, etc. I see that this new Mountain Lion Preview is much different than Snow Leopard's, which is very regrettable. In this version, Preview saves as you go, it seems.
The problem is that everytime I save the pdf I've been working on from File>Save (and even when Preview saves as I go), it does a number of nasty, unwanted things. First, it somehow doubles the filesize (e.g., from 30mb to 67mb). Second, and MOST HATED, it takes the OCR'ed texts/fonts and converts them all to alien faces, square boxes, or just blanks. (God it's making me angry just thinking about it now - I've spent two full weeks now trying to fix this!!!!) This happens regardless of whether I ClearScan the OCR, Searchable text the OCR, or Searchable text (exact) the OCR. It happens regardless of whether the OCR'ed fonts are embedded, embedded subsets, etc. Every option on Acrobat Pro XI, I feel I have tried and exhausted and Preview still f$&#s it up. As far as I can tell, this happens regardless of what kind of font is used in the OCR'ed pdf (e.g., TrueType, CID, etc.). In every single instance, Preview will 1) double the file size and 2) screw up the fonts upon saving. If I take this newly ruined pdf back into Acrobat Pro, highlight text, copy and try to paste into Word, Chrome, or any other app it produces the same result. However, if I right click and "copy with formatting" from Acrobat Pro, it copies the actual words/font. The newly ruined Preview pdf doesn't return any word searches either. And annotations like highlighting, once extracted or even viewed in the notes&highlighting box, show blanks. I have downloaded and tried a Mac app called Skim, and it is the exact same effect, unless I File>Export...
I know this is not a problem with my Mac's fonts since I just did a clean re-install. Font Book tells me everything is alright too. This occurs regardless of what save settings I choose in Preview (e.g., the default settings, the quartz settings, reduce file size, etc.).
The strange part, though, is that when I take this newly ruined Preview'ed pdf, highlight text, go to font inspector, it says the highlighted font is exactly what it was when Acrobat saved it (e.g., Arial). And if I take this same document back to Acrobat and view properties, it says the fonts are the same as they were when Acrobat Pro originally processed it.
SO... I hope someone can help me with a fix for this. I truly do not want to use Acrobat Pro XI as my research pdf tool. It doesn't scroll smoothly, the layout is clunky, etc. It just isn't conducive to research/reading/notetaking. Preview, I think, is, and so I want to be able to have a fix for this so that Preview will quit ruining my life.
I can provide sample pdfs if that might help. I can provide the original Acrobat Pro XI processed pdfs, as well as the newly ruined Preview pdfs. BTW, I posted this in Adobe's forums as well.

I assume the answer by macjack would not apply in the case of Snow Leopard - Preview version 5.0.3 - but I have the same issue with OCR (not the constant autosave issue though) on my '10 MBP running osx 10.6.8 where suddenly maybe about a year ago 2 hugely annoying things changed in Preview.
As first poster stated (and he/she obviously knows a LOT more about this stuff than me) Preview stopped providing accurate search results with most pdf documents (some downloaded, some created from web, etc., no idea of common thread there).
I can NO LONGER COPY AND PASTE any text in any pdf opened in Preview to another application!! I used to have no problem copying pdf text from Preview to, say, text edit. Now it comes up weird boxes and dashes and no, font choice and/or conflict is not the issue.
I realize this thread is within the Mountain Lion community, and forgive me if I should start a new thread in some other area of this forum saying exactly what I have here, but I have searched and searched on this topic for months and this is the first thread I found which refers to these exact issues I'm enduring.
Any further advice or comments on the subject - or even constructive instructions if I should post elsewhere - would be greatly appreciated!

I have a frustrating problem with my iPhone 5 post ios8 installation. The ring tone won't sound when phone is locked/switched off, although the vibration does work. I think it has something to do with "do not disturb"

Hi, I have a frustrating problem that seems to have occurred post iOS 8 installation. When my iphone5 is switched off the ring tone fails to sound i only get the vibration. If i am using my phone and a have an incoming call then the ring tone works as normal. I think it has something to do with "do not disturb" ... i see from the menu in "do not disturb" that under the heading "silence" there are two options "always" and "only when the phone is locked" This does not seem to make sense as i have to choose one or the other!
If anybody can help advise me on this problem i would be very grateful.
Thanks

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

Problem with Bridge CS6 and MCXRedirector (OS X 10.9.5)

Good afternoon all, I have a very irritating issue with Bridge CS6 that I've pretty much given up on now, so I'm wondering if anyone out there can help me before I do.
The issue lies with Bridge CS6 running in a networked Mac environment, first, a little background: I am using OS X Server's Workgroup Manager facility for various restrictions and folder redirection. Our users had a nasty bug a little while ago that caused saved Photoshop files to end up in ~/Library/Caches/TemporaryItems instead of the actual network home location they selected to save in. While this was happening, a single entry was being used in the MCXRedirectory preference to redirect the entire of ~/Library/Caches/
This was resolved by changing that preference and branching it out a little more, so now the folders subject to redirection are as follows:
~/Library/Caches/Adobe
~/Library/Caches/Adobe Camera Raw
~/Library/Caches/Meta
~/Library/Application Support/Adobe
Doing this fixed the saving issue with Photoshop, but has in turn broken Bridge. When launched, Bridge immediately fails with the error "Adobe Bridge CS6 quit unexpectedly" and gives the three options to ignore, report or reopen.
Taking away the ~/Library/Caches/Adobe redirection allows Bridge to work as normal again, but then I'm back to square one with Photoshop files saving in TemporaryItems again.
Does anyone have any advice to remedy this annoying problem please?
Thanks in advance.
EDIT: Bridge version is 5.0.2.4

Sorry, did not solve the problem. The info given did not bear much relation to what I could see in the print drop down box. I have been through all settings I can access and every thing appears normal. The print preview in the print box appears normal and shows colour, but this does not translate to the actual print.
When printing a docuement of 3 pages or more using double sided the result is the first docuement page on one side of a sheet and the last page on the other side, but upside down, despite orientation set to long edge binding. All other pages between first and last are ignored.
When printing docuements originating from printer software such as Print Quality Diagnostic and Make The Most Of Your Printer, the printer performs correctly with good quality printing and colour.
I assume that the Mac update to 10.9.5 has corrupted something but I am not knowkedgeable enough to understand what. Any further assistance would be greatly appreciated.

Problem with Bridge CS4 reading/editing XMP metadata added in Bridge CS6

Please excuse me if this is a dumb/obvious question. I did try searching the forums for similar problems and didn't find anything that seemed to speak to my issue.
I'm having a problem where Bridge CS4 won't read/edit xmp metadata (specifically, keywords and descriptions in the IPTC panel) that I have entered using CS6. it will read some files, not others. The files are all .mp4s. Of these files, I can read/edit IPTC panel metadata for some of them in Bridge CS4; I can add metadata for all of them in CS6. I see no particular pattern in these files to explain what is and isn't read/editable in CS4.
My question is whether this is a compatibility issue between different versions of CS (in this instance, CS4 and CS6). i know it's a tired refrain to blame software when it could easily be user error, in which case I'd be frankly delighted to know what i'm doing wrong. Please bear with me as I give a few more details.
I'm using macs. I've tried this on multiple systems - for instance, on a mac pro 3 which for some reason has both CS4 and CS6 installed, i can add and edit keywords using CS6, but not when using CS4. Again, in CS4, some .mp4 files read/edit, others do not.
Bridge CS4 blames the files and tells me that the selected file cannot store xmp metadata, and that the properties cannot be modified. To be specific, in the metadata panel it says "this property cannot be modified"; in the keyword panel, it says, "This file (zzz.mp4) cannot store xmp metadata. No changes will occur." This seems odd, because I'm able to add xmp metadata for the same files in CS6 on the same computer, and other computers. I know this problem would disappear if all our computers were using CS6 (or CC), but unfortunately that's not a possibility at the moment. Some of them only have CS4.
Computer details (not an exhaustive list, but two instances): mac pro 3.1 running snow leopard, 16GB memory; macbook pro 4.1 running snow leopard, 4GB memory; adobe bridge cs6 (5.0.0.399) and cs4 (3.0.0.464).
Things I have tried:
Permissions - the files are set to read/write for everyone. Given that I can add/edit metadata in CS6, it doesn't seem to be a permission issue.
Purging the cache - other users seem to have had problems adding metadata in Bridge CS4 where purging the cache for affected files solved the problem. Didn't work in this instance.
Upgrading all affected computers to CS6/CC is beyond my control. I need to figure out why CS4 won't let me read/add/edit xmp metadata, if only for the sake of understanding the broader implications for interoperability.
Any helpful suggestions would be much appreciated.
Thanks,
Kevin

adobe bridge cs6 (5.0.0.399) and cs4 (3.0.0.464).
Without having experience with mp4 files and metadata my observation is that you certainly have not updated Bridge CS6 ( should be 5.0.2.4) and I believe also not the latest version of CS4, can't imaging this also stayed at .0.0 so first try to update both.
And if CS4 can read the data of some files it should be capable of reading them all. Be sure to have the files completely cached first, can take a while.
Other things to try in CS4 is refresh preferences (hold down option key while restarting Bridge and choose reset prefs).
And also check for hidden cache files using menu view/show hidden files. Sometimes those cache files can be troublesome between versions.
If purge cache did not work and reset prefs also failed consider to also delete Bridge plist file and Bridge cache file manual (from user library)

Problems with Bridge CS4.

Dear members:
Since my last disappointing experiences with Bridge I decided I would wait until CS4 had been out for a while and Adobe had the chance to clean all the bugs and problems with the first releases. I am now beginning to use the CS Premium suite and Bridge is by far the one application I used the most to browse my large library of photos.
In trying to use for the past few days I have run into numerous problems. Some of them are:
1. When I first launch the application I get an error message stating the following:
" Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation. "
2. While building previews for a folder with approximately 200 images Bridge displayed a message stating the it was low on memory and suggesting I should restart it. This has happened to other folders and not just this one, some with more and some with less images. I am sure the issue has nothing to do with memory as I have always used Bridge CS3 with these folders without any such problems.
3. Despite the fact that all my image folders contain thumbnails and previews previously created by CS3 the new Bridge CS4 treats them as if they contained nothing. The application starts the whole process all over again and takes longer than CS3 did to perform the same task.
My computer is a Powermac G5 dual 2.0 GHz with 4.5 GB RAM and two internal 1.5 GB HD. Considering this kind of internal RAM I don't think memory should be an issue.
I ran the update tool but couldn't find any newer version of Bridge CS4. To the best of my knowledge I am running the latest versions of all applications in the CS4 Premium suite
Some of the questions I have are:
1. Can't CS4 use the thumbnails and previews that were previously built by Bridge CS3 ? Will the application have to start this whole process all over again for every single folder I have ?
2. Why all these error messages and bugs ?
3. Is CS4 really slower than CS3 ? So far this has been my experience.
4. Considering at least one bug remains from the previous CS3 version (the little triangles that appear next to folders even when there are no subdirectories) how many problems should I expect to find with this new version ?
My apologies for all the questions above but the answers are important as I am now beginning to use the application for critical tasks.
Thank you in advance for your help.
Joseph

There appears to be many problems in all versions of Adobe Creative Suite with Bridge.
I have a few post currently and even the employees of Adobe seem very uninterested in helping at all. They sure offer info on posting correct data and correct forum but little else to help resolve our problems.
The majority of problems you are incurring I have had and 99% were cured within the "Security>User" settings. Check similiar posts that are listed to the right of your post.
The final problem of "Not enough memory" has still not been resolved. Phone Tech support is no longer available free and I even paid for 1 session, spent 3.5 hours with the Tech and problem was "escalated"....that was in August 2010!!
Good luck!
Dan

Urgent! Problems with bridge JDBC-ODBC

Hello,
I have found out that JDBC-ODBC bridge in JDK 1.4.1 don't works fine, because, if you want to store text largest 254 characters in a field type text in one record of a Access database's table, it generate a SQLError, I have tried with EasySoft JDBC_ODBC and it works, with it I could store text fields largest than 254 characters, but I have new problems, EasySoft bridge is not free, and don't let store nulls in fields type Date [with PreparedStatement x, x.setDate(theDate)] (raise a SQLError), in the other hand, JDKs bridge do it. Somebody knows if exists JDCB-ODBC free drivers more suitables than JDK's includes, or if exists upgrades?
Is very urgent!, Thanks a lot
(Sorry, my english is very poor)

I have tried it, Is there where I found the EasySoft's JDBC-ODBC driver, but the result is: one problems out, yes, now with this driver I can store String largest 254 characters in fields type MEMO of a table in Access Database, but two new problems, 1st. is a trial version, (requiere paid), and 2nd. don't let store nulls in fields type Date when JDKs JDBC-ODBC bridge lets, and the aplication needs leave this fields blanks.
Any other idea?
Thank

Problems With Bridge for Mac - Playlists and Photos

I have a Sony Xperia Z3, up to date and an updated version of sony bridge for Mac, so there isnt any problems there for a start.
Firstly, when I syncronise my playlists, all the tracks are present on my phone, however not divided into the playlists I syncronised them in. Theres 1000's of songs, so to recreate the playlists individually is very tedious, is there no way of transferring the songs in their collections, so they can be viewed in the itunes playlists?
Secondly, I syncronised alot of photos from iPhoto using the app. Lots of photos have turned up with a black picture icon on the phone, I assume corrupt. Other photos have syncronised all distorted. Why is this? Again, there are alot of these so to do it in smaller sets is also tedious, as the app is pretty slow compared to syncronising with itunes and my old iphone.
Overall, not impressed with bridge for mac, its a pretty unreliable and slow program!

Hi richardackroyd!
Sorry to hear about your problems.
It's hard for me to know exactly what causes the problems.
Can you please send me the error-logs for both the probems.
So I can forward them to the development team.
Here’s how to get error logs from Sony Bridge for Mac:
1. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Clear logs" to remove all old logs and get a clean start
2. Reproduce the problem you're having, whether it's connecting the phone, importing photos, doing backup...
3. In BfM, hold the "alt" key down while selecting the ”Xperia” menu. Select "Export logs"
4. On the computers desktop there should now be a file named "SonyBridgeForMacLogs_[date].zip
5. PM me a open dropbox link withe the files.
Best regards
Fredrik

Problems with Bridge CS3 crash freeze and burn

Hi,
I am running Bridge CS3 version 2.1. 100 on a MacBook Pro 3
Intel Core Duo
2.4 GHz, 2GB ram
I am having some serious Bridge issues. My problems have ranged from it just being very sluggish and slow to Bridge not applying a label to random crashes.
So far today here are the issues:
"Operation Cannot be completed, an unknown OS error has occurred"
"EventHandler:2976"
Will not apply a label when using the command key or from the tool bar menu
Not responding when quitting from icon in the dock
freezes when renaming a file
unexpectedly quit while cropping an image in PS CS3
Things I have tried to resolve this:
shift-alt-command and reset all preferences and purged cache
changing the thumbnails preferences to only process 50mb or smaller files
create small thumbnails
(as a former pc user) I have restarted multiple times...
Things I have not tried:
rebuilding OS
uninstall reinstall
throwing laptop in bathtub
The files I am working on range in size from 4 mb up to 400 mb .psd files
Any ideas?

I can't use Bridge CS3 anymore. It freezes on my screen and the only way to close it is with task manager. Had problems with it the first time I loaded it...a full version of CS3, no upgrade. Spoke with 2 Adobe technicians who tried to help, but being a believer in Murphy's Laws I decided to bypass their suggestions which I had already tried.
The best viewer alternatives to Bridge are:
-Fast Stone Image Viewer is shareware and handles .psd files along with RAW, TIFF, JPG, etc. Go to their site an look for yourself. It was so good I sent them the suggested contribution. Adobe could learn a lot from them.
-Use Adobe Lightroom as a viewer and to do preliminary editing before launching the file into CS3. Adobe got it right in Lightroom...how come not in bridge CS3?
-Nikon View NX is good but doesn't show .psd files.
Nikon's Capture NX is a reasonable alternative to CS3 if you get fed up with Adobe. Or go back to PS Elements!
Finally, some lecturing Photoshop gurus have called Bridge "JUNK...you get what you pay for." Correct.
Benefits of JUNK sofware is that you explore alternatives and can be surprised at what's available out there.
Conclusion: Bridge CS3 is meant to be a "bridge" to many PS products, but for me it's a "bridge to nowhere." Make it simple, guys.

ScriptUI edittext scrollbar problem with Bridge CC Mac

Hello,
With Bridge CC for Mac, in the UI, the scrollbar which come with edittext and multiline option, is not active.
The scrollbar on the right appears by typing text or ENTER, but not by scripting.
Any idea? Thanks
#target bridge
var textgen = new Array();
for (var r = 0; r < 15; r++) {
    textgen[r] = ("line "+r);
var generatedtext = (textgen.join('\n'));
var win2 = new Window("dialog", undefined, [0,0,200,200], ); // UI
with(win2){
    win2.eText = add( "edittext", [5,45,140,175], generatedtext, {multiline: true, scrolling: true} ); // problem here with Bridge CC Mac
    win2.retour = add( "button", [150,5,195,32], "Close" );
win2.retour.onClick = function() {win2.close();};
win2.center();
win2.show();

Welcome to the wonderful world of bridge UI unsolved bugs!
On Mac and PC bridge, CS6 or CC
Sign the petition if we want to make some pressure on in here:
http://gsfn.us/t/34ccy
and here:
http://gsfn.us/t/46vwa
It time to say it:
If (Bridge_Team.exists) {
     alert("Help on this old unsolved bug!")
} else {
     alert("Cloud CC deserves our trust?");

Snow Leopard Installation Problems with Bridge

I just installed Snow Leopard, after having the CS4 Suite with Bridge CS4 previously installed. When I tried to open Bridge after the insallatin of Snow Leopard, I got four error messages in succession, one right after the other when hitting "ok":
1. PiPL Endian Swap Error
Please Update PALoadMacPlugins.ccp with prop.
Unable to Swap PiPLprop 'ms32" øms325 §'
2. PiPL Endian Swap Error
Please Update PALoadMacPlugins.ccp with prop.
3. PiPL Endian Swap Error
Please Update PALoadMacPlugins.ccp with prop.
Unable to Swap PiPLprop 'ms32" øms325 §'
4. PiPL Endian Swap Error
Please Update PALoadMacPlugins.ccp with prop.
After that, the program opens normally. I re-installed Bridge CS2, which works, but when I tried to use the update for Bridge CS4, it wouldn't allow me to put it in. On the installation disc for CS4, the place to select Bridge for installation was grayed out.

I didn't get any fix advice.
When I reinstalled CS4 I didn't install the any of the bonus packs/updates and haven't had the problem.
I also had (for other reasons) to do a complete reinstall of my system software, which may be why it's fixed. I'm afraid to install the bonus pack and find out, in any case.

Frustrating problem with Bridge 6.1.0

Similar Messages

Maybe you are looking for