Frustrating time to find the Solution Manager add-on for CPS Scheduling.

I have spent a couple hours looking through my maintenance optimizer and the software download site.
The problem is that I cannot seem to find the plug in anywhere. I have found posts pointing to different locations but each one has been a dry hole for me.
So here are the questions
1) Does the SolMan Add on for CPS scheduling cost ? I believe it is ST_PSM
2) Where is it on the download site?
Thanks
George

ST_PSM is not part of the "normal" Solution Manager license, it must be licensed separately. If you don't have that license you won't see the it in the Download Center.
Check
Note 1109650 - SAP Solution Manager 7.0 Extension Addon's (which contains the correct paths in Download center)
Note 1122497 - Process scheduling for SAP Solution Manager
Markus

Similar Messages

Where do I find the "Node Manager" service?

Can anyone tell me where to find the "Node Manager Service" In Call Manager 5.1.2 or IPCC 4.5?
My db_CRA database in IPCC is not updating the real time ICD statistics table and Bug CSCsc09160 seems to indicate that stopping and starting the "Node Managers" may fix the issue.
From the bug report:
Symptom:
Under the db_cra two tables (RtCSQsSummary and RtICDStatistics) are not updating. They stop updating concurrently with engine failovers and reboots. Only a hard reboot or a
service failover brings them back into an active state.
When the RtCSQsSummary and RtICDStatistics tables do update on the
primary DB they do not update on the secondary DB and the data on them
doesnt get refreshed.
Conditions:
stopping Node manager on node 1, data fails to be written to node 2. Then when we start NM back up on node 1 data is still not written to either data store
Workaround:
Not much as a workaround, because the solution requirs stop on both Node
Managers and bring up node 1 first and the data starts writing to DB
again.
Thanks,
Brian

Post Author: jsanzone
CA Forum: Authentication
Sven,
The reference to Session Manager is more of a concept of operations versus an entity. The portion of code that you copied and pasted in your post is actually part of the verbiage used in an ASP script that BusinessObjects expects you to create in order for you to obtain your objective. You can use this coding to create your own customized script or you might be able to search around on the web for a more complete solution.

Where do I find the Session Manager?

Post Author: sven
CA Forum: Authentication
Hello,Trying to figure out how users can access the reports from InfoView without having to authenticate themselves to the external SQL-server DB all the time. On Page 94 in the document called 'Business Objects Enteprise XI Release 2 Administrator's Guide' I find the following text: Use the session manager to create a trusted principal and log on to the CMS:ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr();ITrustedPrincipal trustedPrincipal = sessionMgr.createTrustedPrincipal("userName", "cmsName");IEnterpriseSession enterpriseSession = sessionMgr.logon(trustedPrincipal); Where can I find the session Manager? I can't find it

Post Author: jsanzone
CA Forum: Authentication
Sven,
The reference to Session Manager is more of a concept of operations versus an entity. The portion of code that you copied and pasted in your post is actually part of the verbiage used in an ASP script that BusinessObjects expects you to create in order for you to obtain your objective. You can use this coding to create your own customized script or you might be able to search around on the web for a more complete solution.

Define Service Desk Destination in the Solution Manager System (Dump creen)

hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors         SAPSQL_EMPTY_TABNAME
Except.                CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time          13.07.2008 14:05:57
Short text
    A dynamically specified FROM clause has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSHI2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
     caught in
    procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The running ABAP program attempted to execute an Open SQL statement in
    which a FROM clause was specified dynamically in the field "TABLE_NAME". In
     this
    FROM clause, either a table name after a join operator is missing, or an
     alias name after the key name "AS". The field "TABLE_NAME" could be empty as
    well.
regards

Hi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks.

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

How to install the Solution Manager

Hi Gurus,
any one can help me out i want to install the Solution Manager 4 any one can help me out like what is the minimum HDD & RAM is required, and how many exports wil required this Solman. Can i download from Market place please gurus help me out.
Cheers

Download Solution Manager from
http://service.sap.com/instguides
--> Technology Components
Find the installation guide at
http://service.sap.com/instguides
--> SAP Components
--> Solution Manager
For sizing and other questions see note
1088980 - Documentation: SAP Solution Manager 4.0
Markus

How to get the Version of the Solution Manager

Hi Experts,
The Solution Manager is Already Insatlled on our Machine.
How to Find out the Version of the Solution Manager???
How to Disply the Solution Manager Key????
Please give me the Proper Solution on this.
Regards
Khanna

Hi,
Check this link
http://www30.sap.com/korea//services/pdf/Solman_4.0_Maintenance_Optimizer_Setup_Guide.pdf
you might have to use t-code SPRO
Regards,
Ramesh P
Message was edited by:
Ramesh Parashivamurthy

With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution

With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution

Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5

Alerts subtab is missing Cannot find the Health Monitoring add-in

I'm running a Windows Server 2012 R2 with Essentials Services. I ended up switching domains with this server. I completely uninstalled Essentials server and all the dependent components with no reported errors.
I reinstalled everything with no errors. Now when I go to the dashboard I'm getting the following errors.
Alerts subtab is missing - Title
Cannot find the Health Monitoring add-in. Please verify and make sure that the add-in is correctly installed.
I tried uninstalling and re-installing Essentials a couple of times but with no luck.
Is there a way to repair this problem without wiping everything and starting over?
James Glenn

Below is what I found in the logs that seemed pertinent.
Those Dlls are there. I'm wondering if its a security issue?
[10344] 150206.045938.2075: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.2075: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Computers.ComputersPage, ComputersUIAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.2075: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Computers.ComputersPage, ComputersUIAddin
[10344] 150206.045938.2085: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Computers\computers.addin
[10344] 150206.045938.2095: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\GroupPolicyComputersTabExtender.dll: Cannot find the requested object.
[10344] 150206.045938.2105: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.2105: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.MailService.Addin.MobileDevice.MobileDeviceListPage, MobileDevicesAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.2185: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.MailService.Addin.MobileDevice.MobileDeviceListPage, MobileDevicesAddin
[10344] 150206.045938.2185: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Computers\mobiledevices.addin
[10344] 150206.045938.2575: GroupPolicy: CreateColumns entered
[10344] 150206.045938.2575: GroupPolicy: CreateColumns adding column
[10344] 150206.045938.2575: GroupPolicy: CreateColumns end
[10344] 150206.045938.2715: Dashboard.Forms: List view created
[10344] 150206.045938.2815: Dashboard.Forms: Details pane created
[10344] 150206.045938.3305: Dashboard.Forms: Creating TabPage for node D730AA04-07B1-4b9c-9DED-CCB0A723A8EB with display name "STORAGE" for TabControl
[10344] 150206.045938.3475: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Folders.dll: Cannot find the requested object.
[10344] 150206.045938.3525: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Drives.dll: Cannot find the requested object.
[10344] 150206.045938.3645: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\OIMAddin.dll: Cannot find the requested object.
[10344] 150206.045938.3715: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Folders.dll: Cannot find the requested object.
[10344] 150206.045938.3755: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\Microsoft.WindowsServerSolutions.Console.AddIns.Drives.dll: Cannot find the requested object.
[10344] 150206.045938.3855: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\OIMAddin.dll: Cannot find the requested object.
[10344] 150206.045938.4675: StorageOM: StorageBacked created successfully.
[10344] 150206.045938.4675: StorageOM: Set connection identifier to 1
[15084] 150206.045938.4795: StorageOM: Getting storage data from server
[10344] 150206.045938.5025: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5025: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5025: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders
[10344] 150206.045938.5025: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverfolders.addin
[10344] 150206.045938.5035: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5035: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5035: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives
[10344] 150206.045938.5035: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverharddrives.addin
[10344] 150206.045938.5045: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5045: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5045: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin
[10344] 150206.045938.5045: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\SharePointLibraryTabPage.addin
[10344] 150206.045938.5055: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5055: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5055: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Folders.FoldersPage, Microsoft.WindowsServerSolutions.Console.AddIns.Folders
[10344] 150206.045938.5055: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverfolders.addin
[10344] 150206.045938.5065: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5065: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives from C:\Windows\system32\Essentials\. It cannot be assigned to the requested
type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5065: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.Console.AddIns.Drives.DrivesPage, Microsoft.WindowsServerSolutions.Console.AddIns.Drives
[10344] 150206.045938.5065: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\serverharddrives.addin
[10344] 150206.045938.5075: PluginManager: ---- These warnings could be benign if the addin file is not pointing to an adorner. ----
[10344] 150206.045938.5075: PluginManager: Unable to load type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin from C:\Windows\system32\Essentials\. It cannot be assigned to the requested type Microsoft.WindowsServerSolutions.Administration.ObjectModel.Adorners.PageContentAdorner
[10344] 150206.045938.5075: PluginManager: Unable to obtain plugin type information for type Microsoft.WindowsServerSolutions.O365Integration.DashboardTabs.SharePointLibraryTabPage, OIMAddin
[10344] 150206.045938.5075: PluginManager: Invalid plugin file: C:\Program Files\Windows Server\Bin\Addins\Storage\SharePointLibraryTabPage.addin
[10344] 150206.045938.5375: Dashboard.Forms: List view created
[10344] 150206.045938.5475: Dashboard.Forms: Details pane created
[10344] 150206.045938.6575: StorageOM: StorageBacked created successfully.
[10344] 150206.045938.6575: StorageOM: Set connection identifier to 1
[10344] 150206.045938.6675: DeploymentCommon: Failed to open deployment registry: StorageSpacesHidden
[10344] 150206.045938.6675: Exception:
An exception of type 'Type: System.IO.IOException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 02/06/2015 04:59:38
Message: The specified registry key does not exist.
Stack: at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.GetValueKind(String name)
at Microsoft.WindowsServerSolutions.Common.DeploymentCommon.GetBooleanDeploymentData(String name, Boolean defaultValue)
[15084] 150206.045938.6735: StorageOM: Getting storage data from server
[10344] 150206.045938.6875: Dashboard.Forms: List view created
[10344] 150206.045938.6975: Dashboard.Forms: Details pane created
[10344] 150206.045938.7605: Dashboard.Forms: Creating TabPage for node AE5C17D3-0404-4d55-B638-CD22AB727070 with display name "APPLICATIONS" for TabControl
[10344] 150206.045938.7785: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\AddinAlerts.dll: Cannot find the requested object.
[10344] 150206.045938.7825: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\PinPointAddin.dll: Cannot find the requested object.
[10344] 150206.045938.8845: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\AddinAlerts.dll: Cannot find the requested object.
[10344] 150206.045938.8855: PluginManager: Unable to retrieve digital certificate for C:\Windows\system32\Essentials\PinPointAddin.dll: Cannot find the requested object.
[10344] 150206.045939.0305: Dashboard.Forms: List view created
[10344] 150206.045939.0335: Dashboard.Forms: No IDetailContent was given; no need to create details pane
[10344] 150206.045939.4216: Dashboard.Forms: Creating TabPage for node 3ebe6ef4-03bb-4b7c-bf5a-9f2b4890e619 with display name "OFFICE 365" for TabControl
[10344] 150206.045939.4596: Dashboard.Forms: TabControl created. Name: PrimaryTabs, Tab count: 5
[10344] 150206.045939.6106: Dashboard.Forms: Page selected: ffc2b311-08ca-4200-9719-bf0119740eba
[10344] 150206.045939.9996: IDENTITY: ReloadUsersOnce
[25400] 150206.045941.1807: PfBinding: Information: [0] : Adding service dns identity [EDGE-ES] in proxy endpoint.
[25400] 150206.045941.2327: OPEUserListProviderAdorner: OPE is not enabled. no need to refresh.
[5764] 150206.045946.6732: AlertFramework: Subcomponent: Helper > Timeout value is invalid, using default service start timeout
[22312] 150206.045947.6803: OPEUserListProviderAdorner: OPE is not enabled. no need to refresh.
[10344] 150206.045947.8243: StorageOM: folder is not in correct state, so could not open False Healthy
[10344] 150206.045947.8273: StorageOM: folder is not in correct state, so could not open False Healthy
[10344] 150206.045947.8603: DeploymentCommon: Failed to open deployment registry: ServerBackupDisabled
[10344] 150206.045947.8603: Exception:
An exception of type 'Type: System.IO.IOException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 02/06/2015 04:59:47
Message: The specified registry key does not exist.
Stack: at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.GetValueKind(String name)
at Microsoft.WindowsServerSolutions.Common.DeploymentCommon.GetBooleanDeploymentData(String name, Boolean defaultValue)
James Glenn

How to get the Solution Manager Installer

Hello.
I am trying to install Solution Manager and then get the Solution Manager key.
*But I can't download the Solution Manager installation Program. I am searching the installer for a almost week
Please can anybody help me?

Hi,
If you are looking for installing solution Manager you need to have below softwares
1:IM (Installation Master)
2:Exports DVD's
3:Kernel DVD
4:JAVA DUMP
5:Database software
6:JCE Polic
7:J2SDK
If can find the same at service market place www.service.sap.com/swdc>Click on tab Installation and Upgrades>click on A-Z Index>Right side colum click on S>now select solution Manager,there you can find the list of softwares you are looking for.
Regards
Uday

Solution manager ADD-ONS issue

Dear all
            while processing solution manager ADD - ONS , we are getting information that " OCS package SAPK-701DHINSAPBASIS does not match the current software component vector"
and in "RESULT OF LAST QUEUE CALCULATION" in prerequisite set 01..... in
                                             BBPCRM, component BBPCRM,* must not be installed*
plz let me know how to solve this issue.... what the information mean... wat we should we do now...
Regards
Pras

Hi,\
>             while processing solution manager ADD - ONS , we are getting information that " OCS package SAPK-701DHINSAPBASIS does not match the current software component vector"
It looks like relevant software component is not installed to upgrade to SAPK-701DHINSAPBASIS. Have you checked the notes before proceeding with the SAPK-701DHINSAPBASIS ? Are you at 701 level for all the relevant packages?
Rajeev

Finding the finance manager for a user

Hi,
I have the user id of a user along with the O type, obj id and the department the person belongs to.
Now how do I find out the finance manager for that person?
Are there any function modules that can give us the finanace manager for that particular user based on the users o type, obj id and the department the person belongs to?
Thanks and Regards,
Mick

Hello Mick,
If you have clear rule to find the FI manager based on Org. object and structure, evaluation path is a one of solution.
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4b2bb453d11d189430000e829fbbd/frameset.htm">http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4b2bb453d11d189430000e829fbbd/frameset.htm</a>
Regards,
Masa

Where do i find the subscription manager?

where do i find the subscription manager?

Post Author: jsanzone
CA Forum: Authentication
Sven,
The reference to Session Manager is more of a concept of operations versus an entity. The portion of code that you copied and pasted in your post is actually part of the verbiage used in an ASP script that BusinessObjects expects you to create in order for you to obtain your objective. You can use this coding to create your own customized script or you might be able to search around on the web for a more complete solution.

I can't put numbers on the decimals. It only allow ,00 as decimals. If i put 33.00 it's ok but i i put 33.44 when i press enter changes to 3344 as an entire number, i've try everything and can't find the solution. This should be a basic thing.

I can't put numbers on the decimals. It only allow ,00 as decimals. If i put 33.00 it's ok but if i put 33.44 when i press enter changes to 3344 as an entire number, i've try everything and i can't find the solution. This should be a basic thing. How frustrating !!

pedrofromsydney wrote:
€ 55,555.00
that's the result i get. Still why can't i just type for ex. 29.55 and stay like that on the cell ? Why does it always change to 2955 or 2955.00. ??
I don't understand this
It appears you have the cell formatted to Currency, with the default two decimal places.
What I don't understand, though is how Numbers arrived at a result of fifty five thousand five hundred fifty five on your entering the exact keystrokes in Yvan's post:
an equals sign, followed by five ones, followed by a forward slash, followed by a 2.
Here's the result I get:
Could you do the following:
Open a NEW Numbers document using the Blank template.
Drag the Row and Column control (bottom right corner) to reduce the table to two columns and three rows.
Enter the words "My table" in cell A1.
Click on cell B2 to select it, then enter the formula
=11111/5
Use only those eight keystrokes; do not include any commas, periods or other characters not shown.
Click on B2 again to select it.
Open the inspector and choose the Cell Format button.
Do not make any changes in the Inspector window.
Drag the Inspector window to the position shown in my screen shot.
Take a screen shot that includes the Formula bar, the Table (with cell B2 selected) and the Cell Format Inspector pane (the same screen area as in my screen shot above).
Post the screen shot in a reply to this post.
I'm hoping there will be some clues as to what's happening here in the screen shot. Procedure for taking and posting a shot of part of the screen follows.
Regards,
Barry
SCREEN SHOTS (Selected area)
Place the mouse pointer at the top left corner of the area you want to include.
Press shift-command-4.
The mouse pointer will change to a plus sign on a circle.
Hold down the mouse button and drag to the bottom right corner of the area you wan to capture.
Release the mouse button.
The screen shot will be saved to your desktop with the name "Picture 1" (The number will be different if you have taken other screen shots).
POSTING
In the Compose frame, place the Insertion point at the location you want the picture to be inserted.
Click the camera icon above the compose frame to open the Insert Image dialogue.
Click Choose file to open the Choose dialogue.
If necessary, navigate to the Desktop and click on the 'by date column header to sort the files by date, most recent at the top.
Select the most recent picture file.
Click Choose.
Wait for the picture's file name to appear beside Choose file.
Click insert image.
Done.
B.

I cannot send email over 3G. Receiving email is ok. Using wifi from my landfibre allows me to send email. No idea where to find the solution. Suggestions please. Thanks ia

I cannot send email over 3G. receiving email over 3G is ok. Using wifi from my landline (glass) is ok. No idea where to find the solution. Suggestions please. Thanks i.a.
TheOne

You need a DATA service enabled by your carrier to be able to send e-mail via thier network. Do you have a data plan with your carrier ? If so - is it enabled ?
Can you access internet thru your network (not wifi) ?

Frustrating time to find the Solution Manager add-on for CPS Scheduling.

Similar Messages

Maybe you are looking for