Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please.

Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please. I've already tried a lot of your suggested fixes, but without success. Why hasn't Apple Fixed this?

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter  tab, if there is one. Uncheck the box marked
          Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
          Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Similar Messages

  • My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?

    My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?

    Maybe reboot your router. Unplug it for about 30 seconds or so and then plug it back in. Reboot your iPad while the router is powering up.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Windows 8.1 and VS2012 SDK get error "Windows Program Compatibility mode is on. Turn it off and then try Setup again."

    When trying to install VS2012 SDK on Windows 8.1 get the error "Windows Program Compatibility mode is on. Turn it off and then try Setup again."
    See my blog C# Bits | Twitter @sjnaughton Always seeking an elegant solution.

    Rick, Have you had any success with this? I'm also trying to run the tfs_VssUpgrade.exe tool on my Windows 8.1 machine and getting the same exception. Greatly appreciate any insight if you were able to get past this issue! Thanks, Steve
    Same issue here.
    This MS connect thread
    is interesting however.
    Posted by Microsoft  on 9/19/2013 at 2:54 PM                                            
    Hello Alxandr,
    Thank you for taking the time to submit this issue to Connect. This is a known issue with Windows 8.1 RTM and it will be addressed in a future update of Windows 8.1. In the meantime, you can typically rename the EXE to get it to work correctly.

  • Install windows phone 8.0 sdk on win 10 error Windows Program Compatibility mode is on. Turn it off and then try Setup again.

    install windows phone 8.0 sdk on win
    10 error Windows Program Compatibility mode is on. Turn it off and then try Setup again.

    Also having this issue. I am unable to remove Windows Phone Emulator 8.0 on Windows 10 Technical Preview. Here is the relevant log file output
    [6554:4F4C][2014-10-31T13:33:53]: Condition 'NOT (CurrentOperation = "Uninstall")' evaluates to true.
    [6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install")' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition '(VersionNT < v6.1) OR ((VersionNT = v6.1) AND (NTProductType < 3)) OR (NOT VersionNT64)' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition '(VersionNT = v6.2) AND (netfxfullredist_43_DetectKey < v4.5.50709)' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition 'CompatibilityMode = 0' evaluates to true.
    [6554:4F4C][2014-10-31T13:33:53]: Condition 'ProfessionalVersion_DetectKey AND (NOT (ProfessionalVersion_DetectKey = "11.0.50727")) AND (CurrentOperation = "Install")' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition '( VS11BETA_MSENV_DLL_EXISTS ) AND ( VS11BETA_MSENV_DLL_VERSION < v11.0.50324.0 ) AND (CurrentOperation = "Install")' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpressVersion_DetectKey AND (WPExpressVersion_DetectKey < v11.0.50727) AND (CurrentOperation = "Install")' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpressVersion_DetectKey AND (WPExpressVersion_DetectKey = v11.0.50727) AND (CurrentOperation = "Install") AND WPExpressQFEVersion_DetectKey AND (WPExpressQFEVersion_DetectKey < 38)' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpress10_Exists AND (NOT SameLcidWPExpress10_Exists) AND CurrentOperation = "Install"' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpress11_Exists AND (NOT SameLcidWPExpress11_Exists) AND CurrentOperation = "Install"' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: Condition 'NOT Privileged' evaluates to false.
    [6554:4F4C][2014-10-31T13:33:53]: MUX:  Stop Block: CompatibilityMode : Windows Program Compatibility mode is on. Turn it off and then try Setup again.
    [6554:4F4C][2014-10-31T13:33:53]: MUX:  Detect Completed
    [6554:4F4C][2014-10-31T13:33:53]: MUX:  Wait for View to be loaded
    [6554:40A0][2014-10-31T13:33:53]: MUX:  Detect Completed, now create view
    [6554:40A0][2014-10-31T13:33:54]: MUX:  Validate custom path failed: Empty Install path
    [6554:40A0][2014-10-31T13:33:54]: MUX:  Validate custom path failed: Empty Install path
    [6554:40A0][2014-10-31T13:33:54]: MUX:  User feedback control is Enable because opt-in value is NotDefined
    [6554:4F4C][2014-10-31T13:33:54]: MUX:  View loaded
    [6554:4F4C][2014-10-31T13:33:54]: MUX:  Go to Blocker page.
    [6554:4F4C][2014-10-31T13:33:54]: Detect complete, result: 0x0

  • I purchased two songs on my iphone and it did sync with itunes. Then i put the two new songs in a music folder and it won't sync the songs to the folder on my iphone. same phone same computer never had this problem before.

    i purchased two songs on my iphone and it did sync with itunes. Then i put the two new songs in a music folder and it won't sync the songs to the folder on my iphone. same phone same computer never had this problem before.

    In iTunes, try signing out of your Apple ID & then back in: click on iTunes Store on the left sidebar of iTunes, click on your Apple ID on the top right, sign out, sign back in.  Then try to sync your purchased music to your phone again.

  • HT3159 When I double click on IPhoto to open and look at my photos the APP store trys to open it. I never had this issue before. Why now?

    I was using IPhoto looking at creating a Book when I uploaded the book for purchasing the site froze. I stopped the upload turned off computer and when I restarted the computer IPhoto dissappeared. I called Apple and the lady talked me through restoring IPhoto. She found it in the trash.It worked fine for a day or two, I uploaded more photos from Nikon camera closed IPhoto and now it won't open. The App Store trys to open it but it times out and won't connect.
    When I double click on IPhoto to open and look at my photos the APP store trys to open it. I never had this issue before. What  do I do?

    Try dragging a photo to the desk top, highlight it and press COMMAND I this will open the info window, in the drop down menu "open with" select either preview, or other, then select iPhoto. Preview is the default.
    Then click "Change All"
    Hope this helps

  • I have an Iphone 4 and starting two days ago when using either pandora Itunes after two songs i no longer hear sound. This happens whether using the headphones or not. I have to completely turn app off and then back on to get another two songs.

    I am not sure why or what happened but for the last two days every time I attempt to listen to any music I am limited to only two songs. I have tried multiple things but nothing is working. The only way for me to get more songs to play is to completely turn the application off and then restart it again. I have to do this repeatedly after only two songs. You can see that the music is still playing but I am getting no sound. Can anyone help with this? Has anyone ever experienced this?

    if your minimum term contract has expired then the hub is yours and any warranty has expired.  your monthly payments then revert back to standard terms and any discount you had at outset has ceased.  you then go on a rolling monthly contract and the benefit of keeping that is you can move to another ISP with 30 days notice or 14 days if using a MAC code with no cancellation penalty
    in the vast majority of cases if you renogotiate a new contract you can get a better cheaper deal that you are currently paying but you then lose the ability to move at short notice without penalty
    you can always phone the options team who are uk based and see what is on offer, including negotiating a new hub, and if you don't like the offer then don't accept  0800800030
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Why does my mac stop after watching videos for about 20 minutes.I turn it off and then back on and everything is good for about another20 minutes

    when I watch videos (**** or youtube) after about 20 minutes my mac stops and i'll get an error message or disconnected from internet message.I'll shut my mac off end then back on and it is good for about another 20 minutes. help

    Thanks
               I've already tried that and it didn't work,but thanks for the help
                                                    Jeff

  • I have tried to update my iPhone 5c and it is stuck on "connect to iTunes" I have tried turning it off and then back on and it will not work. iTunes does not seem to detect it while it is plugged in.

    I have tried to update my phone and it is stuck on "connect to iTunes" I have plugged it up to the wall charger because i have read that the new update can cause a battery drain and i have tried to reset it. None of this is working. Please help.

    Device not detected in iTunes for Windows

  • My e-book won't turn on. I tried turning it off and then back on but nothing happened.

    I tried restarting my e book but nothing happened. It\s been charging for several hours but there is no sign of life. Any suggestions

    Hi dismachek,
    Perform the steps mentioned on the below support article to resolve this issue:
    http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1008849
    If the issue persists, Reader will require service. Click on the below link to initiate the service request:
    https://eservice.sony.com/webrma/web/index.do
    If my post answers your question, please mark it as "Accepted Solution".

  • My iPhone continually shows me an Invalid SIM message or SIM Failure.  If I switch my phone off and then back on it works ok for a maximum of 10 mins, and then I get the same message appearing.  How can I resolve it?

    My iPhone 4S keeps on giving me an error message about my SIM Card.  It either tells me invalid SIM or SIM Failure.  The only way i can rectify this it to switch my phone off and then back on again, but this resolve only lasts for 10-15 Mins, and then the same error message appears.  Any ideas on the best way to rectify my alleged SIM card issues?
    Many Thanks

    i Had a simular issue years ago with my blackberry on ATT.  As it turned out, my SIM had some issues.  I would head over to your carrier and get a free sim replacement.   It could be a phone or SW issue, but the Sim is my first guess give my experience

  • TS1398 After leaving a wi-fi connection my iphone will not automatically connect to the internet via the 3G network unless I turn it off and then on again. Is there a setting that can be changed to overcome this issue?

    After leaving a wi-fi connection my iphone will not automatically connect to the internet using a mobile 3G network unless I turn my phone off and then back on again. Is there a setting that can be changed to overcome this?

    Then I'm at a loss. Mine has switched automatically from the start, favoring Wi-Fi, any of its registered networks, whenever available. Only thing I can think of is trying a Force Restart and see if that clears things up: hold down Home and Sleep till the screen goes black and a white Apple logo pops up. Release and allow it to restart.
    May be similar, when I got the i5 about 16 months ago, the local carrier was starting to roll out 4G service. The phone would regularly lose all carrier connection, voice and data. Haphazardly would reconnect when it felt like it afterwards. Initially did the Off/On dance to speed things up, but discovered that using Airplane Mode would do the same without the lengthier power cycle. After awhile, the carrier 'fessed they were having capacity issues and later the problem went away. So yours too may also be a carrier issue.

  • It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it, it won't move. I have never had this problem before. Please help.

    It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it to the timeline, it won't move. I have never had this problem before. Please help.
    P.S. I have tried other effects including transitions and it still won't let me drag.

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • Since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says "Wi-Fi: Looking for networks- and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution?

    since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

    since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

  • I have an iPhone 4 and since I updated to iOS6 I must hit the home button several times to return home or sometimes turn off and then back on. Any thoughts? Could this be related to running low on available storage?

    I have an iPhone 4 and since I updated to iOS6 I must hit the home button several times to return home or sometimes turn off and then back on. Any thoughts? Could this be related to running low on available storage?

    Hold the sleep/wake button and the home button until the phone shuts down and let it restart.

Maybe you are looking for

  • Scrollbar in accordion widget?

    Is this possible? I have a large body of text inside one of my accordion panels and I 's like to insert a scrollbar to preserve screen real estate. Any help much appreciated!

  • I am having the B200 error which is a major problem. I have followed the directions without luck.

    B200 error. What must I do to fix the problem? I have removed the ink and printer head and unplugged for 10 min.  The MP620B still fails to work.

  • Best aproach to zoom in on a clip

    What would be the best apporach to zoom on a certain area on a clip? Is there a plugin to do this automaticaly?

  • How long do I have to wait for service?

    Waited over an hour yesterday trying to get through on the phone to itunes store which is so screwed up it keeps telling me that I have authorized this computer plus one other computer to play songs I bought but it won't let me play them because this

  • Updating a primary key column

    I have a table with two columns, both of which make up the primary key. I want the user to be able to update Column2, and to only see relevant records. So, the user should see records where Column1 = :P80_Col1. The problem is that since Column2 is pa