Frustration in imovie. please help!!

My imovie project will not play any of its voiceovers and when I tried to copy these clips to another event the clips became different from the ones I pasted (like other clips from the project) please help, i am very frustrated!

hi, help with frustration, please. i have created a
slideshow in imovie complete with ken burns and audio
and now i want to burn a dvd. i have imported it all
right and it plays in idvd. idvd will not burn it! i
get an error message that states: ''error in power
structure'' there is an empty slideshow in my
project. i hope i'm posting in the correct forum,
maybe i should be in idvd? help anyway?
thanks, bill
oops! now it accepts 99 photos in the clip area but still won't burn--help!

Similar Messages

Whenever I connect my 4th generation iPod thouch, all of the playlists on my iPod get deleted. This is very frustrating. Someone please help me? I searched the settings on iTunes and couldn't find anything.

Whenever I connect my 4th generation iPod thouch, all of the playlists on my iPod get deleted. This is very frustrating. Someone please help me? I searched the settings on iTunes and couldn't find anything.

Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

I am using OS X and some of my customers are not getting attachments sent with Apple mail. This is very frustrating. Someone please help.

I am using OS X and some of my customers are not getting attachments sent with Apple mail. This is very frustrating. Someone please help.

Run the 10.5.8 Combi Updater again, then reboot your Mac.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

I purchased music on ipad and when i log in to itunes on computer i cannot see it. its so frustrating, can someone please help me.

I purchased music on ipad 2 and when i log in to my computer i cannot see the music i bought.
Home sharing is on...
Please help i need to get this music then to my i pod and go for a run!!!!
its so frustrating..
Thank you

Hello Mariola,
Thank you for the details of the issue you are experiencing with your iTunes purchases. I recommend downloading your purchases directly to your computer using the Purchases page in the iTunes Store:
Download previous iTunes Store purchases to an authorized computer
Click iTunes Store near the top of the iTunes window.
Click the Purchased link at the right of the iTunes Store homepage (below Quick Links).
In the page that appears, select a category.
iTunes shows you which of your purchases are available for download. You can view all of your past purchases, or just the ones not currently in your iTunes library. Items already in your library aren’t available for download. If you select Music, you can view your purchases by song, artist, or album. If you’re viewing by album, click an album to see which songs on it are available for downloading.
To download all available items, click Download All.
iTunes 11 for Mac: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12283
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Additionally, you can enable Automatic Downloads so that in the future, all your new purchases will automatically download to your computer. Use the steps in the section titled "Enabling Automatic Downloads on your computer" in the following article to enable Automatic Downloads:
iTunes Store: How to enable Automatic Downloads
http://support.apple.com/kb/ht4539
Thank you for using Apple Support Communities.
Best,
Sheila M.

Very frustrated.. :( please help?

Okay. I have been using javac to compile. Writing code in notepad and compiling.
But I want to use an IDE. I downloaded Netbeans, JBuilder, jEdit and a few others.
My problem is that when I try to build or run my programs I get errors because.. well my guess is that the program can not find any of the packages. But I can not find them or figure out how to point them to the packages. I'm getting really frustrated. My uncle set me up with Tomcat, and Sun Studio and a bunch of stuff that worked so I could compile and view on localhost. I am trying to do the same but just keep getting too frustrated.
Can someone please help me?

Not to be rude, but RTFM.
All those tools should come with documentation--probably even a tutorial or quicksart guide--that covers the vagaries of how they handle CLASSPATH and project directories and whatnot.
If you've done that and it's still not doing what you think it should, then give more information.
Which IDE?
What configuration have you done to try to make it work?
What's your CLASSPATH?
Where are your source files?
What error message do you get?
etc.
"Netbeans, JBuilder, etc. don't work. Please tell me how to make one of them work," isn't a particularly effective question.

Very frustrated with Mail, please help

Hi All,
First of all, I want to tell you that I just moved from a PC to Mac, but I am very computer savvy so I had no problems moving my emails, addresses and all that to Mail, as well as performing any other tasks on the Mac. However, I have one VERY weird problem. Please bare with me as I explain....
I have 3 (three) email accounts setup in Mail. The two of them work fine. The third one has problems receiving emails, it does NOT receive emails at all.
When I try to setup this account, I get an error that the mail server is not accessible. I thought that the mail server was offline but I still tried to access the mail server through the web access. I COULD access it. Then I tried to receive mail in Mac Mail and I got NO error messages, but I did NOT receive any of my test email messages that I sent myself on that email. I was trying to figure out what the problem was, but with no success. Then I thought I will try accessing the emails through Entourage. I was shocked when Entourage DID recieve the emails from that mail server and that email account. Well, by now I was VERY confused and frustrated. Entourage CAN access the email account, but Mail can NOT access it!??! I am using exaclty the same settings for both and still the result is the same.
I didn't know what else to do, so I called the Apple tech support. They were also confused with the issue. They escalated the issues to the engineers and they told me that the server is an Exchange server and that I should access it as such not on POP. Well , no luck again.
So, to sum it up, I can receive email from this mail account from EVERYWHERE except from Mac Mail. I can also access it from Entourage on this same computer, from the web, from a PC laptop I have, but not from Mac Mail.
PLEASE HELP!!! I don't know what to do any more. I hate to use Entourage because I just moved from a PC to a MAC and I don't want to be using the same Microsoft crap (which unfortunatelly is working properly). Any advice and suggestions are more then welcome.
BTW, I did try all of things that I read in different posts on this forum on similar issues (deleting the "mail" folder in library, etc), but none worked. I also tried uninstalling Mail and installing it again, again no luck.
HELP!
Thanks!
Alex

I have no direct experience with Exchange servers, so take this with a grain of salt, but my understanding is that for Mail to be able to communicate with one, it must be configured to allow IMAP access at the server. See the Mail help topic "Setting up your email accounts," which says in part:
"An Exchange account allows you to connect to your Exchange server via IMAP, and if you enter text in the Outlook Web Access Server field, Mail filters non-email related content from the server. (You can get the text you need to enter from your mail account provider.) For Exchange to work with Mail, Exchange administrators need to configure the Exchange server for IMAP access. Some system administrators may refer to an Outlook Web Access Server as an Internet Information Services (IIS) server."
IOW, if you can't convince the administrators that not everyone in the world uses proprietary Microsoft application "standards" (which of course exist for the good of the world & not just for MS), there isn't much you can do except use the crappy apps that Microsoft owns, along with the standards they enforce ... for the good of the world, of course. :-/

TS1424 need help with error (0x80092013) windows, very frustrated...please help.

Very frustrated music lover but cant even sign in to my account without various errors occurring. ...the most recent onevhappened today...it seems Apple cant help me so please if anyone out there can I would be very greatful.

I am getting similar error... I check stuff you guys mention earlier... and I am still getting and error..
NewOrder class just have bunch of method get and set..
public class NewOrder
String customer_name;
int customer_number;
int quantity_order;
int unit_price;
*Get Methods.
public String getcustomer_name()
return customer_name;
public int getcustomer_number()
return customer_number;
public int getquantity_order()
return quantity_order;
public int getunit_price()
return unit_price;
* Set methods.
public String setcustomer_name(String name)
customer_name=name;
return customer_name;
public void setcustomer_number(int num)
customer_number=num;
public void setquantity_order(int quantity)
quantity_order=quantity;
public void setunit_price(int price)
unit_price=price;
public class NewHandlingShipping extends NewOrder
int quantityorder=10;
int id=001;
String myName="ABC Company";
int cost=10;
int ship=4;
public class handling
NewHandlingShipping cust_name = new NewHandlingShipping();
NewHandlingShipping cus_id = new NewHandlingShipping();
NewHandlingShipping quantity = new NewHandlingShipping();
NewHandlingShipping item_price = new NewHandlingShipping();
cust_name.setcustomer_name(myName);
cust_id.setcustomer_number(id);
item_price.setunit_price(ship);
quantity.setquantity_order(quantityorder);
ship=4+cost;
System.out.println("Your Order is $ " + ship);
Getting and error on the bold stuff..
error output...
NewHandlingShipping.java:22: <identifier> expected
System.out.println("Your Order is $ " + ship);
- Please Help..

My iTunes continues to say "Security Code Invalid" when I know it is in fact correct. I can't update my apps or purchase anything and it's extremely frustrating. Someone please help with what to do?

Every time I go on my iTunes account via my iPhone or even my computer, I get notified that my security code is invalid. My account did this a while back, but I ignored it for a while and it eventually accepted my security code. It's not doing that now. It's been a week, I need to update my apps and want to be able to purchase whatever I want. It's extremely fruststing that it won't accept my actual card security code. Someone please help?

Is the address on your iTunes account exactly the same as on your credit card bill : http://support.apple.com/kb/TS1646 ?

WVC54GCA wireless internet monitor, what a frustrating product, someone please help

ok here is the problem:
I am able to see the video via network webcam. However, it is not what I bought it for. I'd like to make it WIRELESS. So
I followed the setup wizard, but it says it can not locate it on Step 2. Why?? I can see the video via 192.168.1.77 which is
the default internal webside for this wireless webcam
Anybody please help
thanks
Hui

The article below will guide you on how to configure Wireless settings of a camera.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=6a89a158db094b01a30f926a57ac05f4_17413.xml&pid=80&...
Title: Setting Up the Wireless-G Internet Monitoring Camera to be Accessed Remotely Over the Internet Article ID: 16337
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=38a241e0e57246b4a186b7275b6cc4a0_16337.xml&pid=80&...

I have switched the sim card from one iphone to a different one, and i added my music from my old phone to the used one, now the old music on the used phone won't delete. im really frustrated and annoyed please help

i have switched the sim card from one iphone to a different one, and i added my music from my old phone to the used one, now the old music on the used phone won't delete. im really frustrated and annoyed please help

Do you just want to delete the music or wipe the whole phone since you've switched to the other one?
If you plug the old iPhone into your computer you can remove stuff via iTunes or remove stuff directly from the iPhone too.

Can't install iMovie, please help!

whenever i sync my ipod 4G it appears a sign on my screen that says "error at installing iMovie", i bought the app on app store on my computer, nothing should be wrong. anyone help?

Hi
I have the same problem with my iPod Touch. But in iPad there is something wrong too. Everytime I go to the appstore, I see "Install" button for iMovie. It shoudn't be there because I updated the iMovie to the last version, you know...
Do you have this kind of problem too? or is there anyone else to have this prob?

Edit Wedding Video from Ritz yesvideo dvd in imovie, PLEASE HELP????

Hello:
I hope someone can help me with this. I had only the tapes from my wedding so I brought them to Ritz to have a simple dvd done. I asked them if I would be able to edit later and they said yes. Now when I watch it (on the dvd player or mac) it is like a real dvd, like bought but 3 hours of "boring" recordings. You know what I mean. It needs the editing but I do not know how to get it into imovie...
Before I go back to ritz, can someone tell me how to do that, where I get my files and what to do so I can import it to my imovie library and start working?
The dvd has a menu and chapters and all that, it says you can purchase a digital scrapbook for windows to edit everything, but obviously with my mac I don't need that and no one ever mentioned it to me either...
Thanks for all the help I can get...
Sabine

DVDs are in a socalled delivery format (mpeg2), which isn't meant and made for any processing as editing...
for using the iLife apps, you have to convert'em first, in recommended order, choose one of the following tools/workarounds:
DVDxDV (free trial, 25$, Pro: 90$)
Apple mpeg2 plugin (19$) + Streamclip (free)
VisualHub (23.32$)
Drop2DV (free)
Cinematize >60$
Mpeg2Works >25$ + Apple plug-in
Toast 6/7/8 allows converting to dv/insert dvd, hit apple-k
connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
none of these apps override copyprotection mechanisms as on commercial dvds...
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
be nice to copy rights

Can't open Sony PXW-X70 (.mxf) video files for Final Cut Pro X or iMovie, please help!

Hi there--
Just got the Sony PXW-X70 and I can't seem to open the .mxf or even successfully transcode the video files into something that can be read on the mac. (Running 10.9.5)
I downloaded Brorsoft Video Converter for Mac and the Ackrock Video Converters and neither of them work. They just are able to import the audio but not the video portion.
Very frustrated here, any advice? Thanks!

The clips from the X70 are not XAVC-S, but XAVC (sometimes called XAVC-L) and the plugin from Sony linked above is not compatible with them. I also don't recommend those sketchy third party conversion options. Still, as of mid-December, the best options for getting Sony X70 XAVC clips into FCPX are:
1. Use the free Sony Catalyst Browse to convert them (one at a time, although you can queue up multiple files without waiting for the previous one to finish)
2. Use the $200 Sony Catalyst Prepare software
3. Shoot AVCHD until there is a solution from Sony - supposedly Sony is at work on a plugin for FCPX to allow native ingest/editing of these clips. I've read that it should arrive very soon, but we'll see.
I'm using option 1 - $200 is ridiculous, and I didn't buy a camera with 10-bit 4:2:2 and a strong codec to shoot in AVCHD
If it's any consolation, Avid and even Sony Vegas will not import them either.

Frustrated with OracleMembershipProvider - Please help I'm losing hair!

I've been trying to setup the membership provider on my local machine and have only succeeded in losing sleep and hair. Here is what I have done so far:
1. Installed Oracle 10g XE database
2. Created schema with full DBA rights
3. Installed Oracle 11g ODAC 11.1.0.5.10 Beta
4. Successfully ran ODAC sql scripts (aspnetcommon and membership)
4. Added XE schema credentials to connection string "OraAspNetConString" in machine.config
5. Added Oracle membership provider to web.config as default
6. Added Oracle.Web.dll assembly to project
Now for the problem:
I run the ASP.Net Configuration and select the 'Provider' tab.
When I choose 'Select a single provider for all site management data', only AspNetSqlProvider is shown. Where is the Oracle Provider??
When I choose 'Select a different provider for each feature (advanced)', I see the Oracle Provider for Membership and Roles. I select both then try to enter 'Security' tab. It will hang then come back with this error:
"There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. "
What am I doing wrong?? I've searched this forum and can't find the answer.

Suggestions:
1. check your machine.config. If OracleMembershipProvider and OracleRoleProvider were not added into the entry, I recommend that reinstall Oracle Providers for ASP.NET. If all files are already copied to your system and you don't want to reinstall, you may use the OraProvCfg.exe (under your ...client_1\ASP.NET\BIN\2.x) to update your machine.config for these two providers.
2. copy sqlnet.ora and tnsnames.ora from your 10g XE installation to your 11g ODAC 11.1.0.5.10 Beta installation in the same Network\Admin location. Please search this forum for the details. You may also want to check your system environment variable TNS_ADMIN. If it's there, rename or delete it. Follow the instructions in this forum about how to check your connection.
3. if you had a successful installation, you should be able to use .NET Framework 2.0 gacutil.exe to check the assembly is listed. (Don't use 1.x gacutil.exe to check as it won't "see" it.)
gacutil /l oracle.web
4. in your application configuration file (web.config), try the second web.config example in the doc which customizes the attribute values. You may put the two sections from OracleMembershipProvider and OracleRoleProvider samples together within the <system.web> </system.web> section.
You may set the values same as your machine.config if you want to use default values. Don't forget to change the connection string on the top of the web.config.

Frustrated with jpanes please help!

Hi,
I'm just trying to figure out how to change the background color of a jPane....i can change to not-selected ones but i'm trying to get the selected one to change aswell. I've tried to use get selected index but it's not working.
Any help appreciated,
Thanks

just out of interest does the colour change in your selected window if you minimise the JFrame then restore it?

Frustration in imovie. please help!!

Similar Messages

Maybe you are looking for