FS 10N only getting one business area report

Hai all,
We r using 4.7 version while using t.code fs10n we r getting only one business area report, we r having six business ares
can any one suggest steps to get all other business area reports
regards
Siraj
APDC/SP

Hi,
If u use Txn FS10N u can include all the business area in one report. i think there's a button called "multiple selection" beside business area field. just click the button and fill in all the related business area which u wanna see in "select single value"'s tab.
hope this will solve ur problem.
TQ
Regards,
Nazrul

Similar Messages

Using more than one Business area in the same report

Hi,
Is it possible / recommended to use more than one business area in the same report.
For example, I have a sales (business area sales) report on one tab and a rebates(rebates business area) report on a second tab.
Thanks

Hello
Possible: yes
Recommended: no
This can certainly be done and Discoverer will not prevent you from having reports that use different business areas as you describe.
However, for management and security purposes it does not make for ease of use. As you know a user has the ability to share a workbook with another user. If they do this then ALL reports within that workbook are shared. If the receiving user does not have access to one or more of the business areas then some reports will run and some will not. This can be very confusing to an end user and a possible nightmare to administer.
My recommendation would be to have a workbook per business area and not mix.
If there is more than one business area per functional area, for example sales and returns, then so long as the users have access to both business areas then you could use a common workbook.
Personally I would not even do this, so my strongest advice would be to have all reports in a workbook written against the same business area.
Hope this helps
Michael

Can i create report using more than one Business Area ?

Hi Gurus,
Can i create report using more than one Business Area?.Could anybody tell me that report will work?.
Vikram

You should have no problem creating a report using more than one Business Area, we share folders across BAs all the time for ease of management. As long as your joins exist its not a problem.
Matt Topper
TUSC, The Oracle Experts
[email protected]

Two fact tables in one business area

Hi,
Would there be problem if two fact tables, one flat, one with hierarchy, in one business area. Both fact tables are joined to same set of dimension tables except one: region_1 to fact_1, region_2 to fact_2. The consistency check is fine. But I get error in Answers. I don't have the exact error with me, but it is complains about fact_1 is not linked region_2.
Any suggestions ?
Thanks.

Thank you, Stijn, Ced for your kind reply.
I did not explain it clearly.
The fact_1 (flat) table has data in all levels (detailed and aggregated). For example, it has % sales to planned from city, state to national (we were not provided with numberator and demoninator to aggregate the detailed data). The fact_2 table has only city level data and have a dimension region_2 with city, state and national hierarchy. For data in Fact_1 table, we simply want to show them in reports. For data in Fact_2 table, reports can drill-down.
In Answers, the error is "Incorrectly defined logical table source ( for fact table Fact_1) does not contain mapping for region_2.state_id".

Production order variance and purchase variance go to one business area.

Hi Experts,
I have a issue while Purchase order we have ordered 3000 qty and while goods receipt we posted 300000 qty and same was issed for prodction order instead of 3000 and got variance. Then afterward purchase order qty was rectified with correct qty then purchase variance happed. The production order variance is getting offsetting by purchase order variance and no effect on gross profit.
Now my question is production variance is going one business area and purchase variance is going another business area. It should not be like that. Both should be showed only one business area. Please provide solution.
Thanks in advance.
Balu

Dear Balu,
You can try OKB9 wherein you need to select the indicator 'BAlrn' against the cost elements of Purchase price difference account. Then select the line item and click the folder 'Detail for business area/valuation area' and input your business area. Thereby you can capture this variance in same business area, even if any other business area is entered or derived differently.
Further, if your production variance account is also a cost element, you can direct the postings to the same business area, we can do the same as explained above. If not, we have to think of another configuration or work around. Pl let me know.
Trust this helps much!
Regards,
Ashok SINGH

Asset transfer from One Business Area to another Business Area

Hello,
I am going to transfer my Asset from One Business area to another business area. So, I allready created a new asset and transfer through TCODE-ABUMN. But system gives me this error
Posting with trans.type 320 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 320 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
can any one please tell me how I transfer my Asset from one business area to another Business area?

Hi
First make sure in your company code global setting in the OBY6 for company code wise ..Iin this screen Indicator: Business area financial statements required if it is ticket
Please don't change business area for old asset . because it will effect the Business area balance sheet. So create new asset and change business area at cost center level
Finally transfer the balance from old asset to new assets in the ABUMN
OR
IF you want solution as per your issue ..Go to SPRO-> Financial Accounting-> Asset Accounting->Transactions-> Specify Default Transaction Types
Here enter Default Transaction Types 300 Transfer of retir. old assets data from cap.asset
in the filed of Transfer Between Areas
I hope it will helps you
Thanks and Regards
sudharshana vamsi

Transfer of a Asset from one Business Area to Another Business area

Hi Gurus,
I am working for a Indian client in ECC6.
presently we are using "ABUMN" TCODE to transfer asset from one business area to another business area. But, in this process we have to create a new asset or transfer to a existing asset with new business area. So, we are retiring the Old asset transferred and the total value and accm. dep is transferred to the new asset.
Now, my client doesnot want to create a new asset, he wants the old asset no. to be retained and keep track of the transfers from one business area to another.
In Time Dependent intervals, i am unable to change Business are. it is only allowing to keep track of changes in Cost centre. Likewise i want for Business area.
Can anybody help?
regards
Jaya

Hi Jaya,
we need to maintain the screen layout rules for the asset master data for the above issue.
Path: SPRO, Financial Accounting, Asset Accounting, Master Data, Screen Layout, Define Screen Layout for Asset Master Data.
Double click Define Screen Layout for Asset Master Data.
Select your screen layout and double click "Logical field group" folder.
Then double click on "3 Time dependent data" and double click "Field group rules".
Here maintain the rule for business area exactly as it looks like for cost center.
Hope this helps you....
Regards,
Sreekanth....

Mt iPhoto library has disappeared from my laptop after syncing my new iPhone with the laptop. I now have a new iPhoto library with no photos. I have tried pressing option when opening iPhoto but I only get one library option and can't find my old one

My iPhone4s was recently replaced by apple due to grey out on wifi. when I went to sync with my laptop my iPhoto library disapeared and I was left with an empty library. I cannot find my old library on my laptop. I only get one option for a library when i open iPhoto while holding down option key. I am worried I have lost all my photos. there seems ot be no iPhoto library on my iCloud either.
Any suggestions?

Syncing with an iPhone should not delete the iPhoto library on your mac. It only will upload photos to the phone (iTunes sync) or import (connecting by USB). How did you sync your phone?
TD, do you know of any way, that a sync could delete an iPhoto Library on a Mac?
You may have opened a wrong library or may be working from a different user account. Are you using the same user name and Apple ID as before?
How have you searched for iPhoto libraries? Have you searched with Spotlight?
Each iPhoto library contains a file called "Library6.iPhoto" - even if your iPhoto library should no longer be recognisable as photolibrary, this file should be found:
Type "Library6" into the "Spotlight" search field in the upper right corner of your screen, like this:
When you see a list of files, select one of them and hold down the key combination ⌥⌘ to reveal the path to the file.
If Spotlight cannot find the file in the packages, use "FindAnyFile" http://apps.tempel.org/FindAnyFile
Regards
Léonie

Business area report error no list generated in f.01

HI experts,
Document spilting was not activated and business area fsv is not active in 0b65. know client want to see the business area report in f.01. Suggest me how to get report now

Marssel Vilaça wrote:
Dear Chandu,
>
> Go to OBY6 and activate Indicator: Business area financial statements.
> Notice: This setting will enable this field as mandatory for all postings.
> make sure that all end users are trained to fill this field.
>
>
> regards
Hi Chandu,
You may wish to try checking to establish if the document splitting box is checked or not. You can do this through IMG/Financial Accounting (New)/ General Ledger Accounting (New) / Business Transactions / Document Splitting / Activate Document Splitting.
Regards
Muhammad

One business area data is not reflecting queries very urgent

we had two business areas under one chart of account .while executing the query the fig of one business area not reflecting in queries what could be the reason.
please i will assign full points give me best solution.Very urgent
Regards,
sampath

my friend kalpana,
data was ther.i will tell u clear picture
i am configuring fi general ledger accounting.
i ahave loaded line item data to 0figl_o02
and i have loaded leading ledger data to ofigl_o10 and ofigl_c10
when i am executing the query i cannot see the fig from one of our business area ACC.Only CRIS B AREA FIG COMING.
WHTA COULD BE THE REASON.pLEASE HELP ME OTHERWISE I WILL BE
in big trouble.i need to test the data.Please kalpana.....
Thanks & Regards,
Sampath

4 domains names can only get one to work

4 domains names only 1 working
i can only get one to work and now its crossed with other domains
example i have jcsrealty.com all ready working fine. i want to post customxcycles.com on a new site but it cross over on to jcsrealty.com. so when you go to jcsrealty.com it pulls up customxcycles.com
and no jcsrealty
please help
thanks

Welcome to the Apple Discussions. Are you publishing to a MobileMe account? Is each site in its own domain file? If yes to both and you're using the CNAME method of domain name forwarding for the first site you published the last published site by iWeb will be the one that gets open when you enter your domain name. All additional sites must use the simple domain name (URL) forwarding.
There are a couple of ways to get around that:
1 - use the simple domain name (URL) forwarding for every one of your sites. That means pointing each site to its respective address on your MMe account: http://web.me.com/YourMMe_Account_Name/SiteName/.
2 - add a dummy site in each of the domain files as described by Wyodor in this post: Re: Is it possible to have multiple sites when using ur Domain name.
OT

Allocation of cost from one business area to another business area

Hello friends,
Client Requirement: They have 5 business areas. one is for Head office and other 4 are business operations. Their head office expenses are booked under various cost centers in H.O Business Area. Now they want to allocate all H.O expenses to other business areas where business operations are carried on.
currently all allocations are made manually. now they want to incorporate in SAP.
is it possible to allocate the expenses which are booked under one business area to other business area???
pls give your ideas for how to allocate those expenses.....

They didn't have profit centre. so i cann't go for that option
Each operation area has many cost centres and internal orders... i have to allocate the costs from the cost center to internal orders.... if it is a same business area there is no problem we can create assessment cylce and allocate the cost.... the problem comes only when the allocation needs from one business area's cost center to other business area internal orders
for that the solution might be create Secondary cost element As you said and by using assessment cycle we could allocate the costs...
vijay

Why only gets one node when select many nodes of tree in DWCS4 on Mac OS

I use tag <mm:treecontrol> to create tree in DWCS4 on Mac OS.
When I select many nodes in tree, but I only get one node by method: selectedNodes.
codes of created tree as following:
<mm:treecontrol name='tree' size='20' multiple noheaders>
     <mm:treecolumn state='hidden'>
          <mm:treenode value='A' state='expanded'></mm:treenode>
          <mm:treenode value='B' state='expanded'></mm:treenode>
          <mm:treenode value='C' state='expanded'></mm:treenode>
</mm:treecontrol>
Who can tell me reasons?
Thanks!
comments: if don't use tag <mm:treecolumn>, tree will not show on Mac OS.

Hi macbig,
I finally got to look at my sister's computer. The HDD "Repair Disk" found missing threads, missing directory records, etc. and ended with:
Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-
up files.
Then, I tried "Verify Disk" and it found invalid volume file count and ended with:
The volume Macintosh HD was found corrupted and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk
I guess running Apple Hardware Test is not going to happen. :/
I've ordered online a new 2.5 disk, make a Maverick boot USB, and start from scratch. Do you have any other suggestions?
As for the corrupted old hard drive, do you have any suggestions of how to get out the data somehow?
Thank you so much!

Can one business area be assigned to several company codes? how to do it?

Can one business area be assigned to several company codes?
what are the configurations?
thanks

Dear Humility,
If, I am not wrong, Business Area is assigned to Company Code via Finance (i.e. NO Direct assignment, but can be used across company code). You can assign a business area to an org. object through the account assignment tab.
Business areas are generally company-code independent. You can post to them from any company code. The Business area field shows up as an additional account assignment when posting to an account as long as the field is turned on in configuration. The field can be made a required entry during posting.
If certain company codes are not active in specific business areas, you can use a validation to prevent postings to this business area from the company codes specified.
Important Transactions, related to Business Area Configuration:
OX03     Create Business Area
OMJ7     assign Business Area to Plant / Valuation Area and Division
OVF2     Org Unit: Sales Area - Business Area Determination rule
OVF0     Org Unit: Business Area Determination rule
OVF1     Sales Area - Business Area Determination rule Slsorg/DstCh
Best Regards,
Amit
Note: Some Relevant Links:
[Business Area|http://www.sap-img.com/zf003.htm]
[SAP Business Area|http://www.saptechies.com/configure-the-sap-business-area/]
[Validation of Business Area for Company Code|Re: Validation of Business Area for Company code;

Blocking of one business area

Hi experts,
My user wants to block transactions in one business area.This company code has four business areas.Out of that ,one business area to be blocked.
Please advise.
Regards,
Samar

Hi,
Create validation at line item level.
goto T.Code: OB28 PRESS ENTER
CO.CODE:1000
CALLPOINT: 2 (Line item level)
select the above line item and double click
click on create"validation" buttion on top
validation name: BA
DISCRIPTION : Business area
then click on create step -icon
then give the description once again
then click on prerequisite
then serach for co.code at table fields on right hand side
double click on company code
then click on" =" SYMBOL
Then click on constant tab
enter the company code no as 1000(give appropirate number)
Step2:
Then click on check below rerequisite
again search for business area at table fields
then double click
then select" =" symbol
then click on constant
enter the business area as 1000
Step3:
then click on message below the prerequisite
Message type :E
MESSAGE NUMBER : 004
PRESS ENTER AND SAVE
Final output as below
Prerequisite
BKPF-BUKRS = '1000'
Check
BKPF-BUKRS = '1000'
Message - E
Message number: 04 (Check the business area , is this correct?)
Now you can start testing to check the validation
All the best
Prasad

FS 10N only getting one business area report

Similar Messages

Maybe you are looking for