FS10N Balance Miss match

Hello,
On the Date 31.03.2010 I gave taken a report from FS10N for my Bank Gl. But now I have again run the report, and I am getting different value for that particular date.
Example - 31.03.2010 *** Balance. 100 Rs.
                 Now I have again run the FS10N, its shows 31.03.2010 *** Balance 120 Rs.
As a result the balance is miss match. Can you please tell me the reason?
Thanks

Hi,
Please check if you have included any other documents for that period.
Double click on the total and check the same in FS10n.
The other reasn could be, if you have not carried forward the balances from the previous year to this year, the balances will mmismatch.
Please check if you have carried the year end closure in f.16.
Hope this helps,
Thanks,
Shilpa.

Similar Messages

  • F.08 & fs10n balance is not matching with fbl3n balance

    Dear all
           i have a problem with FBL3N,FS10N,&F.08
    Example
             G/l a/c :14001200   Sundry Cr - Exp -Dom
           in fbl3n balance amount is =  16,820,645.64-
           in  Fs10n balance amount is =17,160,867.86-
            in f.08 balance=                     17,160,867.86-
    Am confused why system showing this mismatch
    Regards
         Ajeesh.s

    Hi Ajeesh,
    The problem you are facing may be due to the Special GL transactions(may be Down Payments made to Vendors/Sundry Crs). The balance can be matched only after you have cleared the items in the Spl GL with the T-Code F-54 only after the bills get approved. The last entry will be clearing with T-Code F-44.
    Hope this will solve your problem. Reply if you have any issue.
    Regards,
    Ashish

  • The cumulative balance displayed in FS10N does not match the sum of the det

    Hello,
    The cumulative balance displayed in FS10N does not match the sum of the details.  For example, we have a GL disbursement account that has a ***. Balance of 8 million.  The debit is 2 million and the credit is 10 million. But, when you drill down on the ***. Bal. for the current period, the sum of the details is 9 million.  According to our users, the 2 balances should equal.  I did a search in this forum and found 1 post stating they had the same issue and the answer was to run f.16. Has anyone experienced this and if so, how did you handle it?  I'm not sure how f.16 functions.  Do we have to run it for each consecutive year?  I'm not a FI specialist.  I'm responsible for data archiving and the users think it's related to archiving.  However, we have a test system that was resynced with production prior to when archiving was done and it shows that this issue is pre-existing.
    Thank you very much in advance,
    Lourdes

    Hello,
    There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
    You need to identify which accounts are being changed with line item display at a later stage.
    In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
    1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
    2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
    3. Block the account for posting in COA Segment and Company Code Segment in FS00
    4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
    5. Now, remove the block you kept on the GL Account in FS00.
    This will reset the line item display retrospectively.
    Hope this will solve your problem.
    Regards,
    Ravi

  • Carry forwad balances not match.

    Hi Experts,
    I had carry forwad the balances.
    when i saw the Trial Balance (F.08) Retain Earning GL A/c  Balance shows , it is match with FS10n carry frowad Balance .
    or when i double click on on FS10n carry frowad Balance amount it shows Line item wise balance but it is not match with Line Item Balnce amount and Carry forwad balance amount.
    Same as FBL3n Balance amount with FS10n Balance amount it is not match.
    why ?
    waiting for reply
    Regards,
    Jemes

    HEllo,
    The differences that you are viewing in this account is due to the     
    fact that this account is a "Retained Earnings account". System works  
    as designed.                                                                               
    Retained earning account =  PERIOD PROFIT                                                                               
    Within the balance carry forward, the P+L accounts are carried forward 
    to the retained earnings accounts on the balance sheet (definition in  
    Transaction OB53). No documents are created, the balance carry forward 
    can therefore not be carried out via the line item display.                                                                               
    The opening balance on a retained earnings account consists of:        
    Opening balance = Closing balance of the previous year                 
                    + Retained earnings from the P+L accounts                                                                               
    Consequently, the opening balance on a retained earnings account does  
    not correspond to the closing balance of the previous year.                                                                               
    Check the SAP Note 176067, it provides more details for the same query.
    REgards,
    REnan

  • Report miss match error

    hi guys,
    Can anyone tell me what is the easiest way to find out Report miss match error of  bi with r3 report especially in fi.
    thanks in advance,
    regards,
    Bunty.

    lots of ways we can do that.Check your reconciliation reports at your organistaion , then you will get an idea how they compare each time otherwise in general everybody copies data in excel and want to compare.

  • When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

    When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • Auto-reconcilitation Missing matching criteria

    Hi,
    In oracle apps 11i , manual reconcilation for bank statements is done by the user. On the attempt to try Autoreconciliation program the statement lines had the error"Missing matching criteria " in the AutoReconciliation Execution Report.
    I have found in the cash mangement user manual the following:
    The statement line needs at least one of the following criteria to
    match, and all are missing: 1) transaction number; 2) invoice
    number and agent name; 3) invoice number and agent bank
    account.
    But I do not know how to do any of the 3 points above because the bank statement lines entered either manually or uploaded through the interface consist of the following information only:
    POST DATE, VALUE DATE , DR AMOUNT , CR AMOUNT,and BANK TRANSACTION CODE
    What do we have to do to use the auto-reconciliation program?

    Hi,
    We can request bank to provide us information of Transaction number.
    Say a Cheque pmt or receipt is cleared by the bank, the reference of Chk is captured by Bank. These numbers shall be available to you on request along with Bank Transaction Code.
    Regards
    Sridhar

  • A/c doc not created and error msg "Business Area Miss-Match Check input"

    Hi,
    After creation of new Plant and Business area create a invoice , But my accounting document does't created and error msg show "Business Area Miss-Match Please Check Your Input". plz suggest me.
    Regards,
    Sohail

    Dear Sohail Rahman,
    Looks like the Business area has not been properly assigned.
    Business area can be created for three combinations:
    1. Business area by sales area
    2. Business area by plant and division
    3. Business area by plant and item division
    In your case, check whether the business area is maintained for the combination of plant/division and plant/item division.
    Hope this helps
    Thanks
    Murtuza

  • Server 2012R2- RDS Farm Certificate Miss-Match on Session Hosts

    Hi Guys,
    I've another RDS2012R2 issue. Internal and external domains do not match. External: domain.com.au; Internal: domain.com.net.
    I'm getting certificate miss-match errors when connecting to the Farm/RemoteApps.
    I have performed the follow fixes:
    Change published FQDN for Server 2012 or 2012 R2 RDS Deployment (http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80). This resolved the original issue where I was getting a certificate miss-match error externally
    for the FQDN of the server.
    Updated the RDP-Tcp certificate used on the Session Host Servers. This was to resolve an issue where using mstsc to RDP to the farm externally(via gateway) would give a Certificate is not trusted error on the RDSH side.
    Now whenever RDWeb is used to launch a RemoteApp or the farm, I get a certificate miss match error as the RDSH server is called RDS1-TCC.domain.com.net and the certificate is for remote.domain.com.au.
    I rolled back the last change so that RemoteApps and the Farm would work successfully internally without certificate issues. How do I go about resolving the certificate errors?
    For extra background details see my orignal thread, It was marked as answered when only 1 out of 2 issues was resolved. http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS
    Cheers,
    Ben

    Hi Ben,
    Thank you for posting in Windows Server Forum.
    In your case, I can suggest you to check that the certificate must match the FQDN of the server. If you are creating SSL certificate then it must be signed by trusted authority and also the certificate must be stored under “local computer/personal store“.
    Also you can buy the certificate from 3rd party which is wild card certificate and only 1 certificate can be used for your network. Please check below links for more information regarding certificate issue.
    1. Certificate Requirements for Windows 2008 R2 and Windows 2012 Remote Desktop Services
    2. Configuring RDS 2012 Certificates and SSO
    3. Windows 2012 RDS Certificate mismatch
    Hope it helps!
    Thanks,
    Dharmesh

  • Quantity Miss match  -REM

    Hi,
    This is Repititve Manufacturing.
    After creation of basics (BOM,Rate routing etc), I have done standard cost run, Marked & Released.
    Then Backflush is done for the Header material and material document posted several times.
    When I Validate the quantities in CK13N with Material document MB03, I'm getting quantity miss match for the components of type Packaging.
    In BOM, the quantity of the component is 14000 for which header's base qty is 1000.
    The component has scrap of 2.2%.
    I did backflush for header of 100 qty.So the component including the scrap it came 1430.8 i.e 1431.
    It is getting rounded off to 1431 in material document & during backflush because of its UOM - EA.
    But when I'm validating in CK13N by selecting User Entry and providing 100 qty for Header, it shows 1428.56 for the same component.
    Kindly help me in solving this.
    Regards,
    Sankar.N

    Hi,
    Are you using separate costing BOM.Coz looking at your scenario either it should consider scrap or not. Means it could hv value either 1400 or 1431.But, the value which you are getting is different.Whats the costing lot size & price unit in accounting view?

  • Data miss match

    HI sdn Gurus,can anybody share with me some real time issues related to data miss match in support project.i am in need of it.i just want to know that what are the issue did comes related to data miss match in production & support environment.

    Hi
    Data mismatch means,The data in BW and data in R/3 are different...
    This is due to Some load failures,selection criteria is different from R/3 to BW..
    Need to look each and every step of data extraction..need to look at RSA3..How data is extracting..How data is appear at PSA..How data is populated from transfer rules and update rules..How data is loaded into Infoproviders..Some times data is correct in data providers and not correct in report result,because of selection conditions are different..You need to look at all these...
    Hope it helps
    Thanks
    Teja

  • Balance not matching as per FBL5n and FS10N

    When we run the customer balance report FBL5n as on 09/29/2007  on week end it shown a balance ( open item for all customer and recon account  123456 )  of  say 10 M. The same amount we got thru FS10N  we ran on with GL  123456  i.e. 10M. But when we ran the report FBL5n  today ( with same parameter 9/29/07 and recon account 123456,  open items ) we are getting a balance of 13M but our GL balance is still 10M on 9/29/07. Here is my question why the balance has changed  for FBL5N when I am running the report on past date ? I feel it should not. But say there is difference in these two reports, how to reconcile ?
    My problem is I took the balance from FS10N and now I want details of that balance ( customer wise balance )  as on 9/29 . This should match and I need it for auditor .Kindly help me gurus.
    Thanks
    Satya

    Satya,
    The possible diffrence between   FBL5N reports run on first time and second time might be.
    There may be invoices posted to that Customer Accounts with past Posting Date after you took first Report.
    To find out which invoice are posted after you run the report , run FBL5N again with the same parameters and select Entry Date column from the layout and sort it out. If you find some invoices where the Entry Date is past the Date you ran the first Report then these are the invoices which are contributing the diffrences.
    Generally this will happen when Sales/Billing documents are released later to Accounting.
    Thanks
    Sivaram

  • Opening & Closing balance of RG23A part II are miss matching for SECS only

    Hi Gurus,
    Opening & Closing balance for the month of May & April are mismatching for SECS only. where as BED & all other values are getting matched with April closeing & May opening.
    I have checked from Jan till Aprill everything is ok but after this in May i have problem.
    My closeing value in April for SECS is 40K where in May opening it is showing 5K. I use J2i6 to download the register.
    Plz can any one tell me how should i track this inconsistency.

    Its possible that some transactions are posted after you extract the report.  Extract the report again (J2I5) and print them. 
    Have you configured different GL accounts for posting BED, ECS & HCS.  From your description, it seems same GL is assigned for all three components.
    Ravi.

  • Balances not match with FMEM report and FS10N GL wise

    We have developed in report in funds management, it has to be executed based on commitment item and fund center not GL account wise. The report will have two rows actual budget and pan budget. The actual budget should match with GL account balance; it is matching for all GL account except 3 GL accounts. These 3 GL accounts balance is showing more than report balance for three periods (April, May and June).
    Can I know in which I should check. Because I have tried with possibilities I couldn’t get
    thanks and regards

    Hi,
    In the report you have to G/L accounts where you can select on:
    The reconsilation account form the Vendor
    The G/L account where to posting is created on.
    It is possible that there are differences when you have change the reconsilation account form the Vendor.
    The old posting are on the old and new on the nwe account. Perhaps you mis some Special G/L Indicators
    It is possible that values are changed when you run the reports
    Paul

  • EBS Closing balance not matching with opening balance.

    Hi,
    The Scenario: The first file for EBS is uploaded. The Second file opening balance did not match with the first files closing balance.
    As per my understanding the system throws an information message that FB729 that the closing balance did not match with the opening balance. The docuemnts also gets posted
    Question: If the bank sends the corrected file after uploading the first error statement how will we update the corrected account statement with appropriate opening balace.
    Thanks,
    Raja.

    Hi Taro,
                 Thanks for your reply. Infact Initially I was of the same opinion that if there is inconsistency in the closing and opening balance SAP would not process the statement. Thanks for your investigation the sysytem is behaving differently for different formats.
                   The SAP note 947857 only deals with a particular scenario where there is no inconsistency between closing balance and opening balance but the error comes up.
                   I will try to explain why I am asking about a functionality which updates the opening and closing balances of a statement based on our past experiences:
                    If we receive a wrong statement with wrong opening balance from the bank it would take us two weeks to convince the bank  about the wrong opening balance and subsequently bank sending the corrected account statement. If the FB729 message is an error message then there is no option but to wait till two weeks to upload the next statements.
                   So I want SAP  to upload the wrong statement and the subsequent statements as they come form bank. To correct the opening and closing balances i want to check if there is some statndard functionality which can do this. Rather than Table update as you suggested I would prefer a custom program for this functionality if standard does not allow.
                    If the difference between closing and opening balance is due to a missing statement then SAP  has suggested a note "SAP Note 1025077 - Problem with uploading out-of-sequence BAI2 bank statement" which actually allows the out of sequence statements to be uploaded.
                     Finally I would prefer the option of the wrong statements to be uploaded into SAP in the order they have come from the bank and subsequent corrections to the statements as approved by the bank.
    Thanks,
    Raja.

Maybe you are looking for