FS10N  g/l Balance not show

Dear Guru ,
  Issue is , When i Check GR/IR Clearing  /ac in FS10N , the for period 1, 2 and 3 Period toal dr and cr Balance does not display.
balancy disply only for 4 and 5 Balance .
I already check in GLT0 Table , thr also sys does not show  G/L Bal.
When i check for period 1,2, 3 line item showing in the fs10n , but only total  DR/CRbal does not show in FS1ON .
How to resolve this issue .
Wear using 4.7 Version .
Thanks in Advance .
Milind

Dear ,
Yes thr already balance carrie forward process done at the time of year end process .
an i aleady check every thing in perticulre g/l entris and g/l all tables.
Please suggest what I can do ..
Regards ,
MILIND

Similar Messages

  • FS10N GL Balances not showing line item details

    Hi Expert,
    i am unable to see the posted document in FS10N. i ve check the Button in FS00 Line Item display.. and save it.
    again  i did but FS10N display line item not showing .. see the error message below.
    No items selected (see long text)
    Message no. MSITEM033
    Diagnosis
    No line items meeting your selection criteria could be read. This could be for the following reasons:
    1. No corresponding items have been posted.2. You are not authorized to display this data.3. The items have already been archived.4. Migration from classic General Ledger Accounting to new General Ledger Accounting: In migration phase 1, postings are only made to the account for the non-leading ledger

    Big hello for you too my friend My 2 babies are taking all my attention! I am missing my old times here!
    See, you have to understand when you have posted your GL account in 2013 you had only balance information stored. It means you have no data stored in table BSIS. When you activated Line item display this issue stands.
    You won´t create entries in BSIS if you check that flag. Thus you only will have items from now on.
    Have a test. Post new entries and check. they will appear.
    Check also
    LINEITEMS MISSING IN FBL3N AND FS10N
    Best Regards!

  • BP Balance not showing correctly in Aging report

    Good Day all B1 experts,
    We are converting to SAP B1 for fiscal year 2010 and earlier today I have found a problem with BP balance on the AR side.  Below is a summary of the problem:
    Problem:
    - For some BP, after I entered opening balances,  their total outstanding AR balance was not reflected in the Aging report, nor can be found in the Opening Balance window (under System Initialization).
    - However, A/R control General Ledger account is correct and ties to my Year End 2009 Financial Statements
    Attempted Solution:
    - I reentered the "missing" opening balance for those BP accounts.  After entering the numbers, however, the Aging report shows a DOUBLED amount of the correct balance.  And when I go check the Opening Balance window,  the system is showing the correct BP balance (NOT Doubled).
    - Now my A/R control General Ledger and Opening Balance General Ledger Account is out of balance as well.  The difference equals to the amount I reentered.
    Has anyone encountered similar problem before?  I cannot think of anything I did  to cause such mess.  In any case, I am wondering if I need to use the Restore BP function.
    Please provide me some guidance on this.  Thanks!!!
    BR,
    Sunny

    Good Morning Kerstin,
    Thank you for the article.  The version that we are using is 2007A (8.00.180) SP:00  PL:45
    In the article, it mentioned about the Single Reconciliation Engine.  Do you know if that tool comes along with previous upgrades, or we will have to download and install it?
    Actually it seems for one of those problem BP accounts, the correct balance is reflecting on the Aging Report after an invoice was issued yesterday.  However, its BP balance is still not correctly reflecting elsewhere (such as Incoming Payment under banking module.)
    Regards,
    Sunny

  • Account Balance not showing correctly

    Sir,
    Suppose , i have posted an invoice  of Rs.200 against a customer and after some times i recieved payment from this customer of Rs.200 So,  accout balance of this customer should be zero.. But when i see the account balance from business partner master data , it should me Rs.-400 in accout balance field but when i navigate through orange arrow in to accoutn balance details , there i get  zero in balance due field?? ie. it is showing coorectly in details of account ballance but in the business partner master data it is not showing correctly??

    hi divya,
    Check SAP Note 904002 - Customer account balance is displayed with negative sign
    Summary
    Symptom
    Customer Balance is displayed with minus.
    Other terms
    Customer balance, Supplier Balance, Credit Balance, Debit Balance, Display Credit Balance with Negative Sign, Company Details, System Initialisation, business partner, accounts, SAP Business One
    Reason and Prerequisites
    Customer balance is displayed in negative though you expect it to be positive.
    Solution
    Under Administration->System Initialisation->Company Details and the 'Basic Initialisation' tab you will find the setting 'Display Credit Balance with Negative Sign'. This setting decides how Customer and Supplier balances will be displayed.
    NOTE!
    When creating a company it is important to know that this setting is irreversible once transactions have been made in the company.
    When this box IS checked the following applies:
    Customer balances will be displayed as Positive.
    Supplier balances will be displayed as Negative.
    When this box IS NOT checked the following applies:
    Customer balances will be displayed as Negative.
    Supplier balances will be displayed as Positive.
    This setting also influences the entry of opening balances for the G/L accounts. Depending on this setting, the opening balances must be entered as positive or negative numbers.
    By default this box is checked when a new company is created.
    Header Data
    Release Status: Released for Customer
    Released on: 02.12.2005  10:42:10
    Master Language: English
    Priority: Recommendations/additional info
    Category: Consulting
    Primary Component: SBO-ADM-INI-DET Company Details
    Secondary Components: SBO-BP Business Partners
    Affected Releases
    Release-Independent
    Hope it solves problem.
    Jeyakanthan

  • GL Balance not showing in F.01,,when choose group currency 30

    Hi gurus,
    When we run the report : F.01 (Balance Sheet / P&L Statement) with Currency type: 10 (Company Code Currency - INR) report is showing all GL balances.
    But if we run the same report: selecting Currency Type 30 (Group Currency-USD) no GL Account balance is not updating in the report F.01.
    Can you please let me know what will be the problem ?
    Thanks,
    Samar

    Hi ,
    It is not related to foreign currency gain/loss a/c.My users when he runs Trial Bal through F.01,he use "Currency type 30 and found no GL balance is coming.But when he uses Currency type 10 then all balances are coming.
    Kindly advise.
    Regards,
    Samar

  • Skype account balance not showing on android

    My account balance shows a few dollars when view online but the balance shown in my profile on my device shows zero???

    bump

  • My balance not showing up in itunes store.

    I just logged into Itunes and the itunes store. Usally it shows how much balance I have on my prepaid cards left. But it no longer shows it. The computer I have is autherized and i know I have a balance left.

    Try logging back out and back in. If that doesn't work, I'd suggest reviewing your purchase history to see if there are purchases you don't recognize.

  • White Balance Not Showing As Color Temp

    running ACR 6.1 on Windows XP boxes. I'm used to adjusting white balance by utilizing color temperature settings, but I don't seem to have that option in ACR 6.1--All I have is a sliding scale from -100 to +100 and I don't see any way to change this. Am I stuck with using ACR this way?

    What type of image format is it? 
    The behavior you're describing is for a non-RAW image.  RAW images have absolute temperature.  JPGs and TIFs only have relative temperature because the white-balance has already been baked in so to speak without enough information to reverse-engineer the absolute color temperature.

  • HT1918 How can I see ALL transaction history in my account.  Specifically, I would like to see the gift cards I have redeemed for my account.  I know I have over $200 in my account but it is not showing the balance anywhere.  Any ideas?!?!?

    How can I see ALL transaction history in my account.  Specifically, I want to review the gift cards I have redeemed but the amounts are not showing up in my account.  I know I have over $200 in my account and I am unable to access it.  The site wants me to pay by credit card and I don't want to do that.  Any ideas how I can recover the money in my account?

    You can only view your account's purchase history, you can't view a history of card redemptions.
    My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. On my iOS devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to).
    To view your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
    You've tried logging out and back into your account to see if your balance then shows ? If not, and you can't see where it might have been spent, then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Business area wise Trail balance is not showing balance

    Dear all ,
    I am facing problem in f.08.
    We have 5 company code ,8 Business area, We have Activated Business area wise Balance sheet in OBY6.and assigned Plant division and Valuation area .
    I am activated document splitting, Here also i maintained Business area and Profit center is mandatory field.
    when i saw the  business area trial balance gl balance is not showing its giving error" no list generated."
    Kindly suggest me what is the setting we missed.
    Thanks and Advance.
    Girish.

    Hello,
    I think, you did not set "Assign Scenarios and Customer Fields to Ledgers" customizing on SPRO.
    Financial Accounting (New) -> Financial Accounting Global Settings (New) -> Ledgers -> Ledger -> Assign Scenarios and Customer Fields to Ledgers.
    You must define FIN_GSBER to scenarios for ledger "0L".
    Then system fills business area on table FAGLFLEXT.
    But unfortunately can not correct older data.
    Regards,
    Burak

  • MIRO- Unplanned Delivery Costs info. not showing on FS10N line items

    HI,
    Can anyone explain why when posting an Invoice with unplanned delivery costs using T-code MIRO, the purchase order info. does not show in the GL line item display T-code FS10N for any of the unplanned delivery cost line items. If anyone have a solution to allow the purchase order info. to show on the uplanned delivery costs line item that would be great.
    Thanks.
    Rickey.

    Un-planned freight is entered on the header of the invoice and therefore relates to the entire invoice. Since, its possible to have mulitple PO's on one invoice it would only be possible to assign the PO when there is exactly one PO on the invoice.
    Alternative, you can use planned freight or post the unplanned freight using the G/L tab in transaction MIRO. By using the G/L tab you can enter any information required for accounting (including multiple lines in case it is required to split the un-planned freight by several PO's.

  • S_ALR_87012079 Tcode - special GL indicator balance is not showing

    Dear Friends,
    When I execute the above report, it is not showing the balance for some of the special G/L's where we have created for our client's requirement.
    Example: Special G/L indicator - A, B, M, G balances are all appearing, but our own created special G/L's like X,Y,Z balances are not showing.
    Please let me know whether there is any procedure to bring these special GL indicator's balance as well in the above tcode.
    Regards
    Dwarak.

    Hi,
    Check the dynamic selections for the report and input the entire range of Special G/L Indicators in selection.
    Hope it helps.
    Ramanand

  • TS1292 i did redeem the itune gift card the way i usually do and the balance comes up immediately. This time the balance is not showing and when I go back into try it again I am notified the number is redeemed. How do I get the credit on my account?

    i tried to redeem a gift card and have done many time previously. This time the redeemed balance is not showing in my account.
    What can I do to obtain the credit?

    Try signing out then back in to refresh your account info. If the store credits will still not update, best to contact support and have your account checked
    https://expresslane.apple.com/GetproductgroupList.action

  • S_ALR_87013345 (profit centres Vendors): Balances are not showing

    Dear experts,
    We have done F.5D, 1KEK transaction and after that when we execute S_ALR_87013345 (profit centres Vendors): it is not showing any balances but balances are appearing  in S_ALR_87013344(open items-Profit centre payables) is showing correctly.
    do i need to do any other action to get the balances in S_ALR_87013345 (profit centres Vendors):
    Thanks and regards
    Ramarao

    Hi!
    TN 1KEK (program SAPMKEC6) only transfers those AR/AP postings that
    have been splitted by TN F.5D and populated in tables BFOD_A and BFOD_K.
    1KEK transfers the splitted open items that are stored in the F.5D
    split tables BFOD_A / BFOK_A into PCA tables GLPCA/GLPCT. You can use
    the report group 8A98/8A99 via transaction GR55 to investigate the
    content of the BFOD_A/BFOK_A tables. These are the reports you should
    use.
    Please read SAP notes 81374 and 107698 which will give you
    a better information/insight and starting point of a further
    investigation of what the underlying problem in your situation could be.
    BR
    Werner

  • Balance Sheet not showing correct sign for Liability and Equity

    Hai,
    I am using SAP PL 40,
    In SAP Balance sheet Report,
    Liability Ledgers and Equity Ledgers is not showing correct sign. i mean,
    In my Liability Ledger the value is
    INR-10000.
    In Balance sheet it showing 
    INR1000.
    And also, is it possible to bring Dr and Cr column in Balance Sheet?
    Now, it's coming in single Column.
    Please help me out.
    Regards,
    Thanga Raj.K
    09710445987

    Hi
    It's the system definition that under Standard Balance Sheet Report, the
    Liabilities are displayed with POSITIVE SIGN although we know that the
    balance for those liabilities accounts are negative. The reason for it
    is that the liabilities accounts are defined as Passive Account, so when
    the balance is negative, it's displayed with positive sign.  And when
    the balance is positive, it is displayed with negative sign. The
    definition is mainly for the purpose of the reporting. In most of the
    localizations, the financial reports supplied by the business should
    display Liability and Equity with positive sign.
    If you really want to display them in negative sign , you can define a
    customized report template in Financials->Financial Report Templates->
    and select all liabilities and tick the box in front of 'Reversal Sign'.
    Regards,
    Syn Qin
    SAP Business One Forums Team
    Edited by: Syn Qin on Aug 22, 2008 8:49 AM

Maybe you are looking for