FS7 Not communicating with kit lens anymore? No HDMI at 1080?

Got the FS7 in today and was teching it for a shoot. I upgraded to Firmware 2.0, but I coudn't get any HDMI signal out at 1080. I've also swapped lenses with the Metabones Ultra to take a look at how wide the Canons would get. After swapping the lenses and putting the 28-135 kit lens back on, it's not talking to the lens at all. No focus. No zoom. Nothing. Tried switching it to full auto and back to manual. I've cycled the power and pulled the brick. Nothing seems to solve the issue. Any ideas? -B

I had the same 'stuck pin' problem. It was (i presume) causing the lens to freeze and even the camera itself to lock up, needing the battery to be removed and re-seated to get it to respond. Plus my SDI ports stopped working - although the HDMI continued to work. What's more concerning it the scoring to the lens contacts: something is digging into the contacts and the surrounding plastic. This is a stock sony 28-135 kit lens, s/n5101330.i frequently swap between this and a Metabones SB ultra. The SB is also showing the same scoring to it's contacts, suggesting it's something camera-end that's doing it. I'm already having to half-twist the lens off and on again during shoots because it will randomly lockup and become unusable. is this likely to get worse? I don't want to have to send the camera in to Sony unless i really have to as it's now my A-cam that's earning me my main income. A second opinion would be welcome, thanks. (is there any way to upload photos to show what i mean?)

Similar Messages

Outlook 14.4.8 not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox"

Outlook 14.4.8 on iMAC Retina and Yosemite 10.10.2 is not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox".
Accessing Mails with Webbrowser and from Windows Outlook is working correctly.
All Macs (also the ones with OS 10.6.8) do not anymore show any new messages in inbox.
Restarted Server, tried to disable autodiscover on macs and deleting/adding account and repairing database does not fix the problem. Also restarted server several times.
We have the same problem on 2 imacs retina with yosemite and on 2 mac pro with 10.6.8 and different office 2011 versions.
i tried to configure the exchange account in apple mail on yosemite and it also states "connected" and does list some folders but no new mails are getting in.
Windows clients and outlook on them works and syncs fine, and also when connecting via webbrowser at owa it must be a mac-specific/webdav issue.
exchange 2007 Sp3 Version 8.3 (bild 83.6) and Update Rollup 15 for sp3 (automatic updates "HIGH" for server and clients)
there is one update popping up again and again even after everytime successull installation: Windows Mlicious Software Removal Tool x64 - October 2010.
i tried to configure a new user with empty mailbox and configured it with microsoft mail (mac - yosemite) as exchange and was able to send a mail from there (even if quite delayed).
but there are not coming in any mails.
same exchange accounts triggered by imap do work and also via owa.
Exchange Accounts in Outlook for MAC and also in Mail (Yosemite) do show the folder structures but there is no mails showing up. I can send mails from the exchange accounts created but they seem to be processed with a delay of like 15minutes and outlook
is giving error "end of file reached" but messages are send after some time.
Does seem like EWS is extremely slow, to slow perhaps to sync and therefore ending in timeout.
Also i cannot reach the server from externally over ssl https 443. if testing port 443 of exchange from outside the port seems closed even firewall settings of sbs 2008 and sonicwall ports are correctly open.
could it be there is something in regarding webdav which is very slow and leading to timeouts ?
in application log i do have the following two information events every few minute:
The Exchange Web Services started successfully. Event ID 1
and
Process STORE.EXE (PID=3688). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
SERVER.org.local CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
Errors in Application log:
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section
The entry <C:\WSUS\WSUSCONTENT\CONTENTFOLDERACLSCHECK.TXT> in the hash map cannot be updated.
An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 69447
Also outlook 2011 clients are asked by time to time to reenter pwds and errors like "connection is closed. 13"
Faulting application taskeng.exe, version 6.0.6002.18342, time stamp 0x4cd34898, faulting module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0xc000071b, fault offset 0x0000000000082445, process id 0x3288
Certificate Services Client Provider pautoenr.dll raised an exception. Exception code 3221225477.
Backup Exec:
FULL_BACKUP -- The job failed with the following error: A failure occurred querying the Writer status.
Volume Shadow Copy Service error: A critical component required by the Volume Shadow Copy service is not registered. This might happened if an error occurred during Windows setup or during installation of a Shadow Copy provider. The
error returned from CoCreateInstance
Exchange VSS Writer (instance 2d932ef8-6319-4ab8-a45f-1242480b44ad:15) failed with error code 1295 when processing the backup completion event.

Hi,
Since Outlook running on Windows works well, it seems an issue on the Mac side. I suggest ask Mac for help so that you can get more professional suggestions.
More information for your reference:
Please try to verify whether there is any expired certificate from the computer personal store.
If it is the case, please remove them.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

My iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud.

my iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud. However, when i change documents on my mac (documents that are supposed to be in the iCloud), the changes do not sync with my other devices nor with iCloud. Even when i create new documents on my mac and save them to iCloud, all seems okay and i can access them from my mac, however they do not show up in the iCloud and i can't access them with my other devices.
Most recent version of mountain lion updated over a month ago. New iPad in use for over a month.
thanks

The same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password. Typical when today I'm waiting some important emails!

My MacBook is not communicating with my desk top to enable printing from my MacBook. I need to find out how to make that happen. I have a static IP address on my desktop but don't know what to do on the Mac Book.

My MacBook is not connecting to the host computer for the printer. The host computer has a static IP address which is different from the IP address that the laptop is looking for. How do I change the laptop so that it looks for the host computer's correct IP? The laptop is connected to the router. I know this because I can get on the internet with the laptop.

The host computer is Dell and the operating system is Windows 7. The printer is an Epson, and it is wired to the host computer with a USB cable. It does have host printing turned on.
The three have been working harmoniously for a long time. The router had to be reset; and after that, the MacBook documents would no longer print.
We created a new static IP address on the Dell but the MacBook is not recognizing it. We have researched the internet trying to figure out how to make the MacBook locate and recognize the correct IP address from the Dell so they can communicate with each other. The laptop is not communicating with the host computer because is is looking for the wrong IP. The host IP is 192.168.1.245 and the laptop is looking for 192.168.15.237.
I hope everything is clear. The person who originally set it up is no longer available to help me. Thank you for any help you may give me.

Help DSCC agent not communicating with AppServer or Tomcat?!

Installing Directory Server Enterprise Edition 6.3 From Zip Distribution on system running Solaris10 11/08.
Cannot get DSCC to work with either AppServer or Tomcat.
Both AppServer & Tomcat deploy DSEE WAR file and I can look at things that I have manually registered via command line. Cacao agent is running it is just not communicating with AppServer or Tomcat so it cannot commit any actions such as starting and stopping directory instances or creating new directories instances within the web app.
Is this a bug that occurs only when doing a new install using the Zip Distribution?
The Error message I get regardless if Appserver or Tomcat is:
"Could not contact the DSCC agent on <server>. Use the command cacaoadm to check that the DSCC agent is installed and running on port 11169."
I changed to port 11169 because it had a conflict on default port 11162.
Output from cacaoadm & dsccsetup commands is follows:
root@dsee:/ $ /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm status
default instance is DISABLED at system startup.
Smf monitoring process:
8423
8424
Uptime: 0 day(s), 0:47
root@dsee:/ $ /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-params
snmp-adaptor-port=11161
snmp-adaptor-trap-port=11162
jmxmp-connector-port=11169
commandstream-adaptor-port=11163
rmi-registry-port=11164
secure-webserver-port=11165
java-flags=-Xms4M -Xmx128M -Dcom.sun.management.jmxremote -Dfile.encoding=utf-8
java-home=/local/jre
jdmk-home=/local/dsee6/private
nss-lib-home=/local/dsee6/private/lib
nss-tools-home=/local/dsee6/bin
retries=4
enable-instrumentation=false
network-bind-address=0.0.0.0
root@dsee:/ $ /local/dscc6/bin/dsccsetup status -v
## /local/webconsole/usr/sbin/smreg/smreg is MISSING
## /local/webconsole/usr/sbin/smcwebserver/smcwebserver is MISSING
## /local/dscc6/dccapp is present
Sun Java (TM) Web Console is not installed
## /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm is present
## /local/dsee6/cacao_2/.configured is present
## /local/dscc6/lib/jar/nquickmodule.jar is present
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-modules -r
DSCC Agent is registered in Cacao
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm status
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-modules
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm get-param network-bind-address
## Running /local/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm get-param jmxmp-connector-port
Cacao uses a custom port number (11169)
## /local/ds6/bin/dsadm is present
DSCC Registry has been created
Path of DSCC registry is /local/var/dscc6/dcc/ads
Port of DSCC registry is 3998
Any work around or ideas on how to get DSCC working?
Thanks!

I started over and installed Glassfish and everything just worked. After the fact I think the real problem was related to the server.policy file. I think this was the problem because using the default appserver 8.2 that comes with Solaris has a different path and I got this same error when tried using tomcat also. When installing glassfish it uses this default path as in the server.policy example as follows so it just worked.
Add the following lines in the {install-dir}/domains/domain1/config/server.policy file
// Permissions for Directory Service Control Center
grant codeBase "file:${com.sun.aas.instanceRoot}/applications/j2ee-modules/DSCC/-"
permission java.security.AllPermission;
Hope this helps some as I was really stuck and confused at the time and just started playing with the stuff. Growing pains. Thanks to those that replied.
Thanks!
Wences

SAP BI Client tools are not communicating with BO server

Hi Experts,
We've recently installed BI 4.1 . We're having few issues:
1. When client is installed on different machine then it is not communicating with server. We've already tried few things like untick auto assign from Request server and manually assign static port but it didn't work .
2. Our BO Server is running on AWS Cloud.
3. Client is communicating when installed on server machine.
4. Could you please help our how to resolve this error.
5. CMC and BI launch pad are installed on server side as they're web browser tool and we need to install these on client machine as well. Qns is Do we need to install them or provide just URL link? If just URL like where to get these URL links.
6. We can't see SAP Lumira and SAP Dashboard on Service market place to install. Where we can find these software on Service maket place?
7. Could someone please send screenshot to install Dashboard, Lumira, Analysis office and Crystal report enterprise and crystal report 2013.
8. Do we need to install all these on client machine?
9. Could you please give me software list which should be installed on client machine?
10. As i know there is life cycle management tool but it is not even available from server side not even on client side. Could you please recommend how it can be installed??
Thanks in advance.

1. When client is installed on different machine then it is not communicating with server. We've already tried few things like untick auto assign from Request server and manually assign static port but it didn't work .
Could you confirm that you are able to ping the BO server from Client machine. Also use telnet command from commandline of CMD in client machine. It will help to confirm that port communication is successful. Use ipaddress:cmsport for the system while logging into the client software. Update the hosts file entries at client machine with BO server name and ip address. Create an exception for BO installation location at client machine and check the results
2. Our BO Server is running on AWS Cloud.
3. Client is communicating when installed on server machine.
4. Could you please help our how to resolve this error.
5. CMC and BI launch pad are installed on server side as they're web browser tool and we need to install these on client machine as well. Qns is Do we need to install them or provide just URL link? If just URL like where to get these URL links.
Check on the server side first where your web server is installed (I am assuming tomcat in your scenario). Use http://serverame:8080/BOE/BI and http://servername:8080/BOE/CMC (8080 is default port. If it has been changed use the correct port).
If its working well. Perform the same activity using ipaddress:8080 at server. Next chek whether using the same URL you are able to get BILaunchPad and CMC pages and able to login from the same.
6. We can't see SAP Lumira and SAP Dashboard on Service market place to install. Where we can find these software on Service maket place (https://service.sap.com)?
Software and downloads-->Installations and Upgrades
- D" SBOP DASHBOARDS (XCELSIUS)
7. Could someone please send screenshot to install Dashboard, Lumira, Analysis office and Crystal report enterprise and crystal report 2013.
Look into the admin guide for installation pre-requisites. These are available at Analytics Knowledge Center
We have a drop down for all products. Look for the guide and proceed with the installation.
8. Do we need to install all these on client machine?
Dashboard,Lumira,analysis office, CRE and CR2013 are client tools and hence need to be installed on client machine.
We also have CRS 2013 which is a server software and has to be downloaded from service market place. The li
9. Could you please give me software list which should be installed on client machine?
These vary according to user requirements. Check with developers for their softwares needed
10. As i know there is life cycle management tool but it is not even available from server side not even on client side. Could you please recommend how it can be installed??
In BI4.1 LCM comes by default. It is a server application. You can find it in CMC named as Promotion management and version management.
Use the admin guide and installation guide for all of the above. It will help you.

Computer not communicating with printer(s) scanner

I recently hooked up an Officejet J6480 wireless printer. I also have a J5780 hooked up via USB. After hours, and I mean hours, of being on-line with Tech Support through Chat and uninstalling and reinstalling, several times, and trying numerous things, neither printer has communication with the computer for scanning. The J6480 will scan if you go through Paint so it is functioning. The J5780 I haven't tested. I have downloaded drivers and every other thing that was suggested and the computer is not communicating with the printer for scanning. I have a Dell computer Inspiron 530S and am running Windows Vista (32) May I also say, that I disable the Firewall & Virus programs when downloading, etc. so it doesn't interfer. I have tried everything but dynamite to get the scanner to respond. I've downloaded the Patch suggested in the drivers listings and everything. Im beside myself because the J5780 scanned fine until I installed the J6480. Now the window on the printer says there are no scan settings available in the window on the printer. Chat Techs, I think, are beside themselves too. I uninstalled the J5780, installed the J6480 and then went into 'Add a Printer'. Everything went fine except the scanner. I get a message from Solution Center saying there is no communication between the computer and the scanner. I think something is missing here. If anyone knows a solution I would be more than grateful. HELP!!!!

Did you do an L3 uninstall of all HP software and start from scratch? The L3 uninstaller should be on the install CD's for each printer. You may have to do a search of the CD to find it.
Tell me what router, ISP and encryption type you are using? Also, what kind of security software are you using?
Have you done a WIndows Update and updated your security system? Do that between the L3 uninstall and the re-install.
There is a lot going on here. I'll hang in there with you...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My iphone 3gs is not communicating with itunes and in windows there is an exclamation mark

my iphone 3gs is not communicating with itunes and in windows there is an exclamation mark next to the usb device. tried removing itunes and reloading, all softwares up to date. just got a new iphone 4s which is on charge but not switched on and used.

For Windows Vista/7 http://support.apple.com/kb/HT1923 uninstalling and reinstalling iTunes
For Windows XP http://support.apple.com/kb/HT1925.
Make sure you follow these instructions completely with the phone disconnected from the computer. After the reinstallation, reconnect the phone and it should load the new USB driver.

Treo 755 will not sync with my computer anymore

I have a Treo 755 (Palm os) and it will not sync with my computer anymore. I have a PC with Win XP pro SP3. The last time it sync'ed was about two months ago, I had to fiddle with the connection before it would work. Now when I plug the phone in and push the button, the computer chimes but that is all that it will do. After it times out the phone gives an error message. I am thinking that maybe it is the cable or phones contacts that are bad. (It has always been hard to unplug the cable from the phone). I have also tried reinstalling the software with no luck. How can I check the connections, is there another way to sync with my computer?
Post relates to: Treo 700wx (Telus Mobility)

It said that the connection between my handheld and desk top could not be established. After I posted yesterday I looked though the web site and found were is said to blow out any dust from the terminals on the handheld so I did and it worked. This morning I tried it again and it will not connect. It must be one of the connections either on the handheld or on the cable. Is there a way of testing either? The computer is recognizing the handheld but it just will not communicate.

My addressbook is not communicating with iTunes!!HELP!!

I can't sync my IOS devices with my last version of the address book! I updated my address book in my Macbook Pro OS X 10.6.8 and then it is not communicating with iTunes. I tried the 28 step troubleshooting to this issue, my iTunes cache is clean but still not syncronizing... Tried to use iCloud online to upload the vcf cards but in each group it losts a lot of contacts (and I don't know why, because they are far away from the iCloud limits...).

For Windows Vista/7 http://support.apple.com/kb/HT1923 uninstalling and reinstalling iTunes
For Windows XP http://support.apple.com/kb/HT1925.
Make sure you follow these instructions completely with the phone disconnected from the computer. After the reinstallation, reconnect the phone and it should load the new USB driver.

Imessage on my computer not communicating with my phone.

Imessage on my computer not communicating with my phone. In my computer settings my phone number is no longer an option, just my email. How do I get it back?

HI,
I had this.
On checking the iPhone the iPhone Number was not ticked and the whole option to change it was greyed out.
I removed the Apple ID and waited to see if th Number got ticked (Settings > Messages > Send and Receive).
It did not.
I put the iPhone in Airplane Mode
After a few minutes I "restarted" the iPhone by turning off Airplane Mode
This time the Number was ticked.
I Added the Apple ID and then restarted Messages on the Mac.
I soon got the pop message about the iPhone using it's Number and the Apple ID and Accepted.
8:45 PM Wednesday; March 13, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT1386 My IPad2 will not sync with my iMac anymore, keeps giving me an error of failure to start sync after it has tried for 2-3 minutes

My IPad2 will not sync with my iMac anymore, keeps giving me an error of failure to start sync after it has tried for 2-3 minutes

Cenzon-
Are you syncing over WiFi or over the USB cable? Try doing the opposite.
Also try a different USB port on the iMac.
Fred

VM Machines not communicating with each other on Hyper-V 2012

In Hyper-V 2012 on Server 2012 I have created two VM's Server 2008 64-bit & Server 2012 64-bit.
The problem is both VM's are not communicating with each other.
Regards
Ganesh Parte

Hello,
seems this belongs to the Hyper-V networking configuration settings. Please ask this in http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv
and also describe how you have the network settings configured in the Hyper-V MMC.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Ipod all of a sudden not communicating with Bose sound system

I am having trouble with my ipod communicating with my Bose music system. First off please let me mention that I have tried all troubleshooting procedures for both the ipod and the Bose system and nothing has help. I do believe that it is a malfunction with my ipod as my spouse has an iphone and it works like a charm while connected to the Bose system. Up until about two weeks ago I was able to enjoy my music without earphones or the ipod hooked to me, now I'm back to hooking the ipod and earphones up. About two weeks ago while my ipod was connected to the Bose system it started changing songs half way through and if I tried to control it by remote, buttons on the dock or the ipod controls it would just freeze up and no sound would come out. I am unable to forward to another song, change volume or even turn it on and off while docked in the Bose system. This problem just started before that I had no trouble with this. I have the latest update for my ipod so I shouldn't be having this trouble. I have turned it on and off and the same for the Bose system and have followed all the troubleshoothing tips and nothing has been resolved. As I said before my spouse's iphone works excellent on the dock this only happens with my ipod. With that said I am still able to listen to the music with the earphones with no problems.
Another problem I have noticed is that not all my songs that are downloaded to my ipod are visiable for me to select. Certain songs I have to search for as I cannot select them from title, artist, album, etc..
Please help me as it would be nice to enjoy my music without the ipod and earphone connected to me.

Try Resetting the iPod
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
If the above doesn't work, it could be the earphone jack has been shorted, or clogged up and putting the Dock also in mute. This maybe repaired by 3rd Party iPod service.
Have a nice day!

IPod not communicating with iTunes

When I open iTunes a dialog box pops up saying "The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?" To which I answer yes, click the "Continue" button and wait....iTunes then opens up and another dialog box opens saying the same thing "The software required for communicating with iPods and mobile phones was not installed correctly. Please uninstall and reinstall iTunes" Tried this a couple of times but no success. And as instructed removed all the other apple programs as well (bonjour etc) Any help or ideas??? Its a gen 2 ipod nano

hi eddie!
The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." I have uninstalled and reinstalled all software several times to no avail. I also tried many of the diagnostics on the Apple troubleshooting section website, but it still doesn't work.
i'm just making sure that i know what you've tried already, before we try working through some of the exotic causes of this error message.
it sounds like you've seen this document:
iPod shows up in Windows but not in iTunes
... have you also checked up on this possibility?
iPod for Windows: Fast user switching in Windows XP is not supported
love, b

FS7 Not communicating with kit lens anymore? No HDMI at 1080?

Similar Messages

Maybe you are looking for