FS700 SD card slot issue

I'm hoping I can find an answer here since I didn't see a specific forum topic for the FS700.
We have an issue with the SD card slot. When inserting an SD card, the protect-card lock slides into the closed position rendering the card un-writable. Using a small piece of tape, I can freeze the lock into the off position and use the card. Otherwise, we have to replace the cards.
Any ideas?
Apologies if this issue has been discussed previously - I searched the forum, but found no solution.
Thanks in advance.

I don't think it's the slot on the camera, necessarily. It's the way SD cards are designed. I have to deal with this constantly with the SD slots on both my Vaio and my Mac. Best course of action is tape (thinnest, lightest you can find) or trying a different card.

Similar Messages

Built in SD Card Slot issues - Canon XSi

I have had a Canon Digital Rebel XSi for a few years now and it has always worked well with my macbook and iphoto. I recently upgraded to the Macbook Pro (early 2011) and was pretty excited about being able to leave the USB cable behind.
Here's where it gets interesting:
When I pop the SD card out of my camera and put it into my macbook pro the SD card shows up on the desktop and in iphoto 2011, however it doesn't have anything on it except for the default folders that the camera creates. No photos.
I could also see that there was occupied space on the SD card, no files but used space
When I put my SD card back in the camera and got an error of "Cannot create folder" so I couldn't use it or see the photos anymore
I used a restore program to get all the photos I'd taken over the weekend trip off the card
Next I decided to reformat the SD card in the Canon XSi, I popped off a few pics and put the card back in the Macbook and I was able to import them
Cool it was fixed... well, actually I put it back in the camera after importing and "Cannot create folder" again! Again the card is useless
I updated the firmware on the XSi to the latest 1.1.0 version and tried it all again, but still the same results
There is a fix and it's simple enough. If I just continue to use the USB cable everything works normally. I will of course do this, but I'd love to use the new SD card slot and not corrupt my card. I'm curious if anyone else is having similar issues. I'm also concerned that when I grab photos from a friend's SD card that I'll break it, and that just aint cool.
Thanks to anyone who reads through this exciting post and offers any suggestions.

You could have a faulty slot, aluxious.
Have you tried inserting the card in the slot as quickly as possible, rather than gently, though. I've found a couple of mine at least don't mount if I insert them too slowly. (http://support.apple.com/kb/HT3553 seems to confirm the need for this).
Checked with various cards, and made sure the contacts on the cards are clean and undamaged, I guess?
Cheers
Rod

Memory speed and graphic card slot

Hi,
I have just built a system with a P67A-GD65 B3 board, everything works fine, but while double-checking on the system's specs and performances I came across two weird issues:
- I have 2 x G-Skill F3-17000CL7-2GBXHD RAM sticks at 2133MHz, I have enabled XMP in the BIOS (with leaving all other settings in automatic mode) and the BIOS indicates the RAM is running at 2133MHz, 7-10-7-27, however, when I run the MSI Control Center (latest version of the app) it says on the home screen of this app that my RAM is detected as "DDR3-1600 (800MHz)" in the speed field. I also ran CPU-Z and it says there that my DRAM frequency is 1064.4 MHz (the FSB:DRAM value is "1:8"), with the 7-10-7-27 timings values. Which one should I believe? The WEI gives a score of 7.9 for my memory which is ok, and I am not running in any performance issue nor I am looking to do any overclocking, but I just want to make sure that I am making the best out of my money and that I am using the RAM as it is supposed to be used... Can someone shed some light here?
- I have installed my graphic car on the slot that is the furthest possible from the CPU as I believe they both generate quite some heat and so they should be as far away as possible from eachother. In CPU-Z I have a link width for the graphic interface of "x8" with max supported of "x16". Is this something that is related to the slot and should I move the card to the slot closer to the CPU? Or is this something else? Is there a setting in the BIOS maybe that can address this?
Thanks!

Both are correct information. The detected '1600MHz' is actually the factory stock speed from the IC chip of the RAMs. The readings of "1064.4MHz" is the running speed that the RAM is currently on so for DDR calculation, you have to multiple 1064.4MHz by 2 to get 2133MHz.
The reasons for 2 readings to be detected is due to your RAM being factory overclocked by manufacturer before it went on the retail shelves, which is very common. Most or any RAMs that you see with speed above 1600MHz are generally overclocked by manufacturer using 1600MHz RAMs for speed boost.
The graphics card slot will still runs at x16 with your card.

Problem with memory card slot on nokia c5 03

Sir,
I have a Nokia C5 03 from the last 8 months.....
Working very well.
Recently, my memory card stopped working.
I thought that there might be a problem in the memory card and bought a new one.
Even though i inserted new card in my phone, i am getting the same error.
In file manager it is displaying as "Memory card Corrupted."
I have checked the new memory card by inserting in to another phone which was working normally.
There i have even formatted the new memory card and again inserted into my c5.
Then also i am getting the same error message........
Can any one suggest me what to do in this regard??????
Thanks in ADVANCE.
Solved!
Go to Solution.

Hi,
Welcome to the forum!
Have you also tried inserting the old memory card to another phone as well? What happened after inserting it to another phone? If it's working properly with another phone, the memory card slot of the C5-03 might have an issue so you should bring it to the repair facility to have it checked.
You can search for the nearest repair facility in your area from this link: http://www.nokia.com/in-en/care-point-finder/
Hope this helps.

H430: Windows 8.1 is not recognizing SD card slot

I have Lenovo H430 and is working great for me.... yet i have a problem after upgraded windows from8 to 8.1
the SD card slot is not recognizable
can't be found in device manager
and when i try to add the device it is not found, so what i do is run the .exe and that is all
1st nothing happen when i insert the SD card (it is 8GB)
so i downloaded the device driver and now whenever i insert the SD card nothing happens more than turning the green light on!!
still not recognizable

@Sarahmarie
You can try out this process and see if it helps:
Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices
I assume that you probably already have seen this, but for your convenience, here is the support page for your notebook: HP 15-r029wm Notebook PC Drivers
The newest audio driver I could find there for your notebook has these parameters:
Released: 2014-02-21
Version 6.0.1.7156
Realtek High-Definition (HD) Audio Driver
The version number matches the one you gave but the date is different.
You can always try the Realtek site, for their drivers, however, they are not going to be customized to match the components in your notebook, but you could try and then go back if it does not help.
Realtek Downloads
Another thing you can look at from the Microsoft support website:
Automatically diagnose and fix Windows audio playback problems
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Remote lock & Memory card corrupted issue

Remote lock & Memory card corrupted issue
Hi Dear Friends,
You might have experienced the "Memory card corrupted issue."
Don't panic! The solution is here!
Your memory card is just 'locked', it isn't 'corrupted'!
For sure, this post would be of great help to you, if:
• You have enabled the "Remote lock" feature of your Nokia device.
• You have sent the remote lock message to your device and locked it remotely.
Finding the solution really took me a lot of time. I was inspired by various posts on the Discussion, and decided to find the official notes on the issue. So would like to thank those who shared their tips, and helped us solve this problem.
I'm using E66, (you might use something else), and would refer to E51's and E65's User guide so often.
Of course, I'm not going to explain the instructions, and recommend you to refer to your user guides when needed.
On the contrary, I'm going to explain what may not be mentioned in your user guides.
Let’s Begin
What Has Happened:
In short, you attempted to test the feature, your phone was locked, you keyed in the lock code, code was accepted, you used the phone for a while, switched it off, powered it on, you were prompted the Lock code, you keyed in the lock code, code was accepted, you attempted to view some stuff that was on your memory card, you didn't find it, you tried to run a program that was installed on your memory card, the program icon didn't open, you put the memory card in the card reader and connected it to PC, it was not detected, you went to Menu> Tools> Memory card> You saw "Memory card corrupted"!
Don't, don't select the Yes selection key if you got the caution message, "Memory Card corrupted, reformat it?" because your memory card isn't corrupted, it's simply being locked!
But you can't find the unlock memory card command in Menu> Tools> Memory card> Options.
So? What to DO?
1. (This step is optional) Disable the Remote lock feature.
(Refer to your user guides) and change Allow Remote Lock> to no.
Then, while the unit is on,
2. Press the power key briefly, and select Remove memory card.
3. Remove the memory card from the slot.
4. Press OK if prompted.
5. Reinsert the memory card in the slot.
6. Reopen Menu> Tools> Memory card.
Is your memory card detected? If yes!
7. Follow tips number 2 & 3 of What to Know section below.
Did you get "Password removed" message?
If no, be careful of the case of the first character.
If you had changed the Remote lock message many times, use the one that was practically sent to the device via text message.
. In case you had set a password on your memory card before, you may also attempt to unlock the locked memory using your own password, not the first eight characters of the remote lock message.
Step seven would make the memory card detectable to the connected card reader to the PC too.
8. The memory card is detected temporarily, but it is locked and the "memory card corrupted" issue reappears every time you switch off/on the phone, unless you successfully complete step seven.
What to Know?
Official User guide Tips:
1. Remote locking also locks your memory card. (E51 page100)
. Yes, the one mobile phone that sends your device the predefined remote locking message, receives the confirmation message in response, indicating, "Mobile telephone and memory card are locked". But it isn't written in E66's and E65's.
2. To unlock the memory card, select Menu> Tools> Memory> Options> Remove password, and "enter the remote locking message as the password". (E51 page100)
. Yes, quite clear, but the quoted part ("enter the remote locking message as the password") isn't written on my E66's User guide, and there's a vague precaution on E65's, (refer to number 4).
3. If the message is longer than 8 characters, the first 8 characters are used as the memory card password. (E51 page100)
. Yes, quite clear good E51, but I don't own you; I have E66 your little sister. I owe my memory card's survival to nice users on the Discussion.
4. The maximum number of characters allowed is 8. Using more than 8 characters could prevent unlocking the memory card and require reformatting it. If reformatting the memory card is required, all information on the card will be lost. (E65 page28)
. Quite interesting, but it contradicts what good E51 says in number three¡!
. And it contradicts my own experience of the issue (and some other users' on the Discussion) too, since my E66's memory card accepted the 'first eight characters' of the 'ten-character long’ remote lock message that I had previously used to remote lock it.
. The first three tips are quite important and shouldn't have been excluded from E66's and E65's user guides. I don't have the time to download and review all the user guides that support this feature, but at least I read some user manuals and also got the impression (from the posts on the discussion) that there had been not enough information on E66's, E65's, E71's, N96's, and some others.
You may like to do a simple search on Google:
"The first 8 characters are used as the memory card password" site:nokia.com
Since the content of the user guides on the server seem not be searchable for any reason, you won't find any official support result except those of the good users on the Discussions. And the 'Nokia Site Search" brings no result too. (At least on the date of this post).
¡ Terribly sorry for those who have selected Yes to the Reformat caution message. It wasn't your fault. But there's an idiom that says, sleep on it! "Think about it for a while before coming up with a decision".
But now that you have tested the feature and know its solution, don't be afraid, and enable the Remote lock feature again! God forbid, but it may be needed one day!
Yours,
http://nds1.nokia.com/phones/files/guides/Nokia_E51_UG_en.pdf
http://nds1.nokia.com/phones/files/guides/Nokia_E65-1_UG_en.pdf
http://nds1.nokia.com/phones/files/guides/Nokia_E66-1_UG_en.pdf

Dear, I guess, / This article doesn't suit your case. / • You have not enabled the "Remote lock" feature of your Nokia device. / • You have not locked your device remotely. / Because you don't know where the remote lock is and haven't played with its settings. / You need to explain what has happened. / The only thing we get is that your memory card doesn't open. / 1. your phone model, e.g., 5130. / 2. What did you do recently that might have caused this issue? / 3. What methods did you try to unlock it? / Use some of the tips provided above. (except number 1). / Yours

Macbook Pro - SD Card Reader Issues Solved!

I recently purchased a gently used, early 2011 MBP. I've had it for a few months, but I did not try using the SD card reader until last week... so much for kicking the tires. Long story short, the darn thing did not recognize or mount one single SD card out of a handful of cards, and at least 3 different card manufacturers all used with my Canon DSLR. I searched the net trying to find a solution and tried everything from sticking the card in at a some strange and ridiculous slant to shutting the computer down three different ways and resetting the System Management Controller (SMC); nothing worked. So today I spent 25 minutes or so chatting with an apple care specialist and they (Jim the apple care guru) finally came up with a solution, even though I'm sure neither one of us knows exactly why it worked. So here goes...
Put your SD card in a external card reader, once it's mounted go to disk utilities and reformat (erase) the drive to Mac OS Extended. Take it out of your external reader and put it in the built-in reader on your Mac. Now, of course, it will no longer work in your camera or most other devices so you'll have to format it again in your device of choice. However, here's the kicker... once I did l all of that and took some quick pics, I put it back in my MBP and it popped right up even after a reboot. But wait there's more.... I then put the SD card in my wife's work laptop (PC running Win8) and played with the files for a bit, then stuck it back in the Mac and it still recognized it. So there goes the "windows screws up the formatting myth).
So naturally I assumed that I would be forced to go through this double formatting process for all of my SD cards (and I have a lot), but then it happened! A Christmas miracle in October. I tried a second card, and then a third and a fourth and a fifth, etc... AND now they ALL pop up just like they should. Without reformatting or any other humanly changed processes. Yep... There you have it, it makes no sense. But it works ;)
Somehow formatting just one card in the card reader "woke up" the whole process, almost like my MBP was like, hmmm I was wondering what you kept sticking inside that's slot of mine...
Hope this helps someone. Sorry for the rant :)

Anyone else with card reader issues should read this page. Just because your card reader doesn't appear to be working or has mysteriously dropped off your system doesn't necessarily mean a logic board replacement. I've repaired several portables over the years that had been quoted for costly logic board replacements, when in fact the failures were relatively easy to resolve once you understood the real problem.
It's common belief a PRAM or SMC reset should fix all hardware glitches but sometimes it just doesn't go deep enough, as I found out with my 2011 MBP. Simply removing the battery was all it took to resurrect my seemingly dead card reader, when PRAM and SMC resets failed to have any impact on the problem.

E63 SD card slot

Hi all,
I bought an E63 at the end of May.
During the first month all was going fine, but now I've been having problems with the SD card slot for 1 month.
Every 2 days what I have in my external card disappears and I have to download my data again. I've lost pictures and other nice things I had.
1) Is anyone experiencing the same problem?
2) Is it possible that the card slot tend to lose the wire contact to the card every now and then?
3) In case 2) is true, does it makes sense that E63 resets and formats the SD Card when it happens? I mean:
when the SD card gets lost for a while due to a bad electrical contact and then goes back to life when the contact is restored, does it makes sense that E63 re-formats the SD card? That seems what's happening to me every 2 days lately.
4) In case there's no electrical issue involved, is it possible that some virus or bug is doing that?
thank you, Paolo

hadimassa wrote:
Format your card in the E63, not on your pc. When you remove the card, use the proper dialog. Dont just pull it out.
If this problem continues, you have a hardware problem and go back to the shop.
First of all thanks for answering.
As for the SD formatting I've noticed that when I found the telephone had removed my files it also had re-formatted the SD card. At least there were no more files inside the SD folders and the folders were the usual ones of E63.
As for the SD card removing procedure, is there any step I've to take before removing the card? I haven't found any hint of it.
In any case I'm afraid I have some hardware problem: these morning the only 3 personal files (audio files) I had in my sd card were suddenly removed without any reason.
Before of that I had tried to copy one of those audio file from the SD card to the phone memory and at the end the phone-memory copy was not working (I played it and it kept repeating the same first 2 words).
What I have to understand is: these fact the files are repeatedly removed from the SD can be blamed on to the SD card itself in case it's corrupted?
I mean:the phone feels the SD card is corrupted and keeps trying to restore it by formatting it? Is it possible?
Is it worth I buy another SD card and test the phone with the new one? Take into consideration I don't need another SD card and that my PC can easily read it.
Or is it possible the card is good but the electrical contacts are not so that the phone can't read correctly the card, "thinks" it is corrupted and re-format it?
thank you again

Camera Card slot shows up as network sharepoint

I work in a mac environment, five computers running osx 10.5 throught 10.8. they all show one camera card slot on the HP 6500 as a bloody sharepoint! Is there any way to make this card plug stop broadcasting on the network short of ripping out the ethernet cord?
Guess which one is the camera card ...
anyhelp appreciated.
parallax44

Sounds like an interesting issue, does this displaly constatnly or only when you put a card in the printer? Additionally, is there anything that this is doing which prevents you from using the features of this deviece?
Let me know!
-Spencer

Has anyone had a SD card melt while in the SD card slot in a mac book pro?

I own a MacBook Pro, from Mid 2012, (owned it for about a year, brand new) up-to-date software and have never had any problems with my MacBook until I recently tried to put an SD card into my SD card slot. I tried to see if I could see if there was anything on the SD card. After about 5-10 minutes of trying to open the card's folder on my MacBook, I decided to pull the SD card out. I ended up burning my fingers and then seeing the back of the SD card melted and still very hot. This is the very first time I have ever tried using that port. It doesn't smell burnt or anything and all of my other ports, ie: usb, etc, still work. I was just seeing if anyone else has had this issue before.

I too have just had this issue, put a micro SD in an adaptor and I thought I could smell burning plastic.
When I pulled the card out it burnt my fingers and had warped. Glad I was there to take the card out otherwise **** knows what damage could have happened to my mid2012 macbook.
I would think this isolated to a poor adaptor as they didnt cost me much...will only be using good brand from now on.

Sd card slot not reading card

I have a Pavilion dv5 1235dx running with Windows Vista. My sd car slot doesn't read the memory card anymore and if I explore to find the file myself it is not there. But I know that the card is fine because other computers read it. It worked in the past but has stopped working recently. What should I do?

, Hello and thanks for posting on the HP support forums. Here is a lint that should help you with the sd card reader issue. HP Notebook PCs - Using and Troubleshooting Memory Card Readers (Windows 7 and Vista) Please let me know how this goes. Thanks again for posting and have a great day.

SD card slot not workin

I have an HP Touchsmart 15-r053cl running windows 8.1. Im having an issue with the built in SD Card reader. It was working fine when i got the laptop, but it stopped working some time ago and I have not been able to get it fixed. I've tried alost everything. I've uninstalled and reintalled the driver several times. Even tried different kinds of drivers and still no luck. the computer does not recognize when an sd card is inserted at all. it makes no sound. no messages pop up. Is as if i had not inserted anything. I've also tried different SD cards and still nothing. no response from the notebook whatsoever.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY TouchSmart 15-j053cl Notebook and your SD card slot not working correctly. Here is a link to help troubleshoot the Memory Card reader. The section you need to look at is SDHC card locks up or the SDHC card cannot be read. You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.I would also check into the device manager to see if there is anything in there that shows a complication. What is the manufacturer of the SD card as your does only 32GB for Secure Digital cards? Hope this helps you out. Thanks.

Sd card slot not working. HELP

hi I have had my macbook pro 13'3 for 5 months
just now I have tried to put my SD card in the SD slot and it goes in lopsided and doesn't read
do i take it to the genius bar or what?
also it is hard to fit in and it has had some more problems like a dead pixel which I haven't got fixed yet and it doesn't go to sleep properly (and i'm not an uncareful person it has never been droped or any thing.)
really need an answer on this guy's
Ben.

I purchased an iMac Friday July 27. I think I may have a solution that worked for me but requires a delicate touch and good eyesight. What the issue was the first time I insert a SD card it would read it no problem. Then when I ejected to insert another, it would not mount unluss I restarted the iMAc with the card inserted.
In searching the forums I found one user said it is a microswitch contact n the iMacs internal SD card that detects a card is present.
The remedy is to work this switch a bit. If you look inside the SD card slot on the side of the iMac, you will see a variety of contacts that engage the SD card's contacts. But on the very top in the back is a small metal contact that lines up with the 45 degree angled edge of the SD card.
So by using a tooth pick or another non-conductive piece, VERY GENTLY work this switch in and out. First couple times I did it, it would reset the switch, but card would remount again on the second try. But as I did it more it finally started working.
The other thing I did was shut down the computer, unplugged it from the wall for at least 15 seconds. plugged it back in and waited 5 more seconds.
Then on start up I reset the PRAM. By once you hit the power button, immediately hold option(alt)+command+P+R all at the same time. Keep them held down until you hear the second chime. Was told reseting the PRAM resets the hardware memory that sometimes can become corrupt. Can't say for sure this helped, but right out of the box I installed new RAM into my iMac. So it's possible something got screwed up in the process.
But I think massaging thecontact did the trick.
It's not hard, but be carefull to damage or overly bend the contact. Take it in if you feel uncomfortable doing this.

Card Reader issue on Qosmio F50-10Z

I have had this issue for a while, It began with the original os Vista 32 bit, so i decided to buy the toshiba upgrade cd for windows 7, after upgrading everything worked fine, except the card reader, no matter how many times i installed/uninstalled,installed the driver it would not work!.
So I used the recovery cd, not once BUT TWICE, and to no avail i sent it off to repair.
I got a message on a piece of paper telling me it would work on the original os, i thought they had fixed something.
So i used the recovery cd yet AGAIN, and to my short lifted excitement of seeing no yellow explanation marks i put in a micro sd card (2gb) which initially worked when i first bought this laptop, and got no response.
The bigger problem is my warranty is now finished!, So basicly i have been BUMPED OVER, cause the memory card slot is NOT WORKING, and it wasnt an software related problem!
Any reccomendations?.

Hi karimtarek,
Which driver version you are using on Vista and Windows 7? My Qosmio F50 is running Windows 7 and Im using driver version 1.00.29.02 from the Toshiba page.
Are you using the same version?
Furthermore it would be interesting to know if the SD card slot worked after you got the notebook from service center back. Have you tested this before or have you started recovery installation immediately?
Have you tried different brand of SD cards? I always use SanDisk Extreme cards because they never made any problems.
Furthermore you could try updating the BIOS. Maybe it works if you using a pretty old version
Last but not least if its still not work and you think its a hardware malfunction, ask the service centre again. If you speak a little bit with technicians, maybe they can repair it as a gesture of goodwill.
Good luck! :)

HP Pavilion DV7 1240us Express Card Slot Stopped Working

My express card slot stopped working.
The tech I was working with for the HP tuner card seems to think it is a driver or hardware issue.
Please see the email string below.
I tried all I know to get the slot to work, but I do not know which driver for it.
Please help me.
Thanks in advance.
Below are the emails.
Thanks, the problem is I do not know which driver it is.
I looked through the entire device manager tree, and do not know which driver controls the express slot, can you send me in the right direction?
I have an HP Pavilion DV& 1240us laptop.
Any direction would be greatly appreciated.
----- Original Message -----
[Personal Information Removed]
Sent: Monday, September 24, 2012 5:14 PM
Subject: RE: Ticket: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Without inserting another device into the slot the only thing I can think of is checking device manager for the drivers for that express slot and see if they are installed or reinstall the drivers.
If the device works on another laptop but continues to have problems on the first one then there must be something going on with the express slot on the first laptop.
Regards,
Jorge
[Personal Information Removed]
Please include previous correspondence when replying.
From: J[Personal Information Removed]
Sent: Friday, September 21, 2012 5:44 PM
To: [Personal Information Removed]
Subject: Re: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
No I do not, have you had this type of issue before?
Could it be missing or corrupt drivers?
Is there a way to test the slot without a device, checking drivers etc..
----- Original Message -----
[Personal Information Removed]
Sent: Friday, September 21, 2012 4:41 PM
Subject: RE: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Do you have another express card device that you can plug into the laptop in question and see if something malfunctioned on the slot possibly?
Regards,
Jorge [Personal Information Removed]
Please include previous correspondence when replying.
From: JrSonic [Personal Information Removed]
Sent: Friday, September 21, 2012 11:43 AM
To: [Personal Information Removed]
Cc: z1r1200cc
Subject: Re: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Yes it is connected directly, it does not even get recognized by device manager.
No default beep when plugging and unplugging.
IT USED TO WORK NO PROBLEM.
It will work in another laptop.
I am a tech by trade, so if I have to edit the registry, etc.. let me know.
Right now I am baffled, what can I do.
From: [Personal Information Removed]
Sent: Friday, September 21, 2012 10:01 AM
To: [Personal Information Removed]
Subject: RE: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Hello,
Are you making sure to connect the 1500 directly into the express slot in the laptop and into a usb converter?
When it is plugged in does anything appear in device manager with a yellow mark next to it? Is it being listed under sound, video, game controllers at all?
Regards,
Jorge [Personal Information Removed]
Please include previous correspondence when replying.
From: Joe [Personal Information Removed]
Sent: Wednesday, September 19, 2012 7:18 PM
To: Danger1
Subject: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 App: wintv6 Country: usa [senderbase]
Name: Joe
Email: [Personal Information Removed]
Product: HVR-1500 (77xxx)
Application: wintv6
OS: vista64
Country: usa
Problem description: My tuner stopped working,I used HWclear to no avail.
The tuner works in another laptop, so it is not the hardware.
Will not make the customary sound when plugged and unplugged.
I am very PC savy and tried all I know, driver reinstall etc..
Please help.
Thanks

Hey there,
Can you explain more on this issue? I see by the emails the Express card slot is not functioning. What you are using in the card slot? Is the the HP TV Tuner card? If so, do you have another express card handy so you could test to see if it was the card or the slot? If your missing the driver you will need to use the HP Recovery CD to reinstall the TV Tuner driver.
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

FS700 SD card slot issue

Similar Messages

Maybe you are looking for