FSB OCing kills suspend and AMD Overdrive

Using the FSB OC switch on my motherboard to increase the FSB 10% works. However my PC wont suspend properly now and when I try to run AMD's Overdrive software, it crashes. Any thoughts?
Brad

I've never been keen on OC'ing using switches.
The only advice I have for you is to set it back to default and change the FSB in the BIOS instead, leaving everything else as is. See how you go. Even if you bump it by just a few MHZ, see what happens.
You tend to get far more fine tuning out of the BIOS as well, and can push things right to the limit.

Similar Messages

MOVED: FSB OCing kills suspend and AMD Overdrive

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=150556.0

I've never been keen on OC'ing using switches.
The only advice I have for you is to set it back to default and change the FSB in the BIOS instead, leaving everything else as is. See how you go. Even if you bump it by just a few MHZ, see what happens.
You tend to get far more fine tuning out of the BIOS as well, and can push things right to the limit.

K9A2 Platinum 9950 and AMD overdrive

Ive been gathering overclocking info for ages now and Ive never really tried much. Ive just upgraded to the AM2+ platform from my old 939 box. Ive just discovered the AMD overdrive utility and have been playing with it in novice mode. I slid the bar notch by notch until I reached level 10, the highest in novice mode. It really didnt do much it seems, now my 2.6ghz cpu is running at a blazing 2665.36 after using the novice mode to max . Looks like all its done is raise the PCIe clock to 110, HT ref. clock to 205 and the memory clock to 410. Nice little baby steps . It passed the stability test no sweat. What I was wondering was how effective is the auto clock feature? Does it overclock until it finds a max oc or can you stop the process when you are satisfied with the progress (example whan it reaches 2.8 can I just stop it and test the stability?). How is the utility overall? I know its better to do it in the BIOS but for a novice like me it seems like a safer option.

Quote from: Sake on 16-December-07, 20:47:56
It's the BIOS. Just tested it with beta v1.21 and gave me the 700 chipset message too. Also with v2.10.
With BIOS v1.1 it gave me the unsigned driver message.
After booting Vista X64 with the option F8 and then "Don't check for unsigned drivers" Overdrive starts.
And showed to be a very nice tool.
I'm sorry for the above post.
I was WRONG...
With the K9A2 CF use: Overdrive from the MSI download page
http://global.msi.com.tw/index.php?func=downloadfile&dno=6176&type=utility
Only still the unsigned driver thing so boot Vista X64 with the option F8 and then "Don't check for unsigned drivers".
The chipset shows as RD790

970A-G45 with latest Bios not read correctly By Amd Overdrive

System is as follows
Motherboard: 970A-G45 Bios is now 1.61 all have been tried
CPU: AMD FX 8120
Memory: AMD Performance Edition 1600MHz 8 gbyte
PSU Corsair GX600
problem is that AMD BEMP profiles are grayed out,With this processor and memory the BEMP profile should be available both AMD and Patriot the makers of the memory say the problem is the bios not being read correctly by AMD overdrive.Now how do we get a bios release that will be correctly read by AMD Overdrive.here are pics of cpu-z and AMD overdrive BEMP.
I used the instructions posted here but the image in the instructions doesn't show either
http://img593.imageshack.us/img593/6560/cpuz1x.jpg
http://imageshack.us/content_round.php?page=done&l=img651/1912/cpuz2j.jpg
http://imageshack.us/content_round.php?page=done&l=img41/2338/amdoverdrivebemp.jpg
ok the links work now had to resize images

Does AMD overdrive start and work on your system, besides the BEMP thing: yes!, so that is not the question or problem here.
Do you have the hardware components that are needed to support BEMP: NO!
Quote
AMD Black Edition Memory Profile –feature is available with the following, validated memory modules:
Vendor: Part #: Supported CPU Models:
Corsair CMD4GX3M2B1600C8 965BE (C2), 955BE, 720BE
Corsair CM3X2G1600C6GT 965BE (C2), 955BE, 720BE
Corsair CMG4GX3M2A1600C6 965BE (C2), 955BE, 720BE
Corsair CMG4GX3M2B1600C7 965BE (C2), 955BE, 720BE
Mushkin 996657 965BE (C2), 955BE
Mushkin 996601 965BE (C2), 955BE
OCZ OCZ3BE1600LV2G 965BE (C3), 955BE
OCZ OCZ3BE1600C8LV2G 965BE (C3&C2), 955BE
Patriot PGS34G1600LLKA 965BE (C3&C2), 955BE
Patriot PGS34G1600ELKA 965BE (C3&C2), 955BE
Patriot PGS34G1333LLKA 965BE (C3&C2), 955BE
Patriot PGS34G1333ELKA 965BE (C3&C2), 955BE
In addition the system must meet the following requirements in order to enable the Black Edition Memory Profile feature:
790FX, 790GX or 790X AM3 motherboard with BEMP compatible BIOS revision
AMD Phenom™ II AM3 Black Edition CPU
In any case, this is a pointless discussions. I point to the specific parts on the AMD site that have to do with "BEMP" and you ignore that and point to AMD Overdrive stuff, which not necessarely includes BEMP support unless the hardware conditions are properly fullfilled.
Contact:
- AMD Support
- MSI Technical Support
... and Patriot support, this time mentioning that your neither have a "790FX, 790GX or 790X AM3 motherboard" nor an "AMD Phenom™ II AM3 Black Edition CPU".

AMD Overdrive

I installed amd overdrive version 2.1.6 from www.brothersoft.com/amd-overdrive-232055.html when it installs it says it cant find a AMD 7 series chipset on my computer. what version of amd do i need and where can i get it?

I knew that, i have the easy OC switches on my board, should i use those, then fine tune it with bios? and what in bios should i change?
sorry im a newbie to OCing but i really wanna get started learning all i can, i am getting either the: http://www.thermaltakeusa.com/product/chassis/fulltower/armor_lcs/ve2000swa.asp case or the:
http://www.newegg.com/Product/Product.aspx?Item=N82E16835118019 to help cool my machine which one would you prefer to have? or i could pick this one: http://www.coolermaster-usa.com/product.php?product_id=2881
which one do you think would be best?

[SOLVED] Poweroff, suspend and hibernate don't work

I installed Archlinux on my work desktop on Monday and can't get poweroff, suspend and hibernate to work. The command `systemctl poweroff` sort of works, except it doesn't actually turn off the computer. Suspend and hibernate don't work at all, the computer hangs on the terminal with a cursor on the top left corner of the screen. Here is the log from `journalctl`. There doesn't seem to be any error messages in it, as far as I can see.
Apr 16 10:02:55 carolfs-ifusp sudo[1127]: carolfs : TTY=pts/0 ; PWD=/home/carolfs ; USER=root ; COMMAND=/usr/bin/systemctl poweroff
Apr 16 10:02:55 carolfs-ifusp sudo[1127]: pam_unix(sudo:session): session opened for user root by carolfs(uid=0)
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Session c2 of user carolfs.
Apr 16 10:02:55 carolfs-ifusp gnome-session[576]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp org.gnome.evolution.dataserver.Sources3[591]: Received terminate signal.
Apr 16 10:02:55 carolfs-ifusp colord[453]: Automatic remove of icc-9cb50954c1872204852075bef0599dec from xrandr-Goldstar Company Ltd-W2043-16843009
Apr 16 10:02:55 carolfs-ifusp colord[453]: Profile removed: icc-9cb50954c1872204852075bef0599dec
Apr 16 10:02:55 carolfs-ifusp colord[453]: device removed: xrandr-Goldstar Company Ltd-W2043-16843009
Apr 16 10:02:55 carolfs-ifusp polkitd[358]: Unregistered Authentication Agent for unix-session:c2 (system bus name :1.37, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Apr 16 10:02:55 carolfs-ifusp ntpd[300]: ntpd exiting on signal 15
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Session c2 of user carolfs.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Session c1 of user gdm.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Session c1 of user gdm.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Sound Card.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Sound Card.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping system-systemd\x2dfsck.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice system-systemd\x2dfsck.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping system-getty.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice system-getty.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping User Manager for UID 1000...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Disk Manager...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Login Service...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Default.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Default.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Login Prompts.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Default.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Default.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Login Prompts.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping GNOME Display Manager...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Starting Generate shutdown-ramfs...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped RealtimeKit Scheduling Policy Service.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Locale Service.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Starting Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Disk Manager.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Starting Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Reached target Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Reached target Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Starting Exit the Session...
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Starting Exit the Session...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Network.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Network.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping dhcpcd on all interfaces...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Received SIGRTMIN+24 from PID 1159 (kill).
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Received SIGRTMIN+24 from PID 1160 (kill).
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped User Manager for UID 120.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped User Manager for UID 1000.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping user-1000.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice user-1000.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping user-120.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice user-120.slice.
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: sending signal TERM to pid 264
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: waiting for pid 264 to exit
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: received signal TERM from PID 1161, stopping
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: eno1: removing interface
Apr 16 10:02:55 carolfs-ifusp systemd[387]: pam_unix(systemd-user:session): session closed for user gdm
Apr 16 10:02:55 carolfs-ifusp systemd[568]: pam_unix(systemd-user:session): session closed for user carolfs
Apr 16 10:02:55 carolfs-ifusp gnome-session[576]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp gdm-session-worker[383]: <3>GLib: Source ID 71 was not found when attempting to remove it
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: AT Translated Set 2 keyboard: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Microsoft Microsoft Basic Optical Mouse : Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Power Button: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Power Button: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp org.freedesktop.Tracker1[591]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: dhcpcd[1161]: sending signal TERM to pid 264
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: dhcpcd[1161]: waiting for pid 264 to exit
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: exited
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Login Service.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: dhcpcd.service: main process exited, code=exited, status=1/FAILURE
Apr 16 10:02:55 carolfs-ifusp mkinitcpio[1145]: ==> Starting build: none
Apr 16 10:02:56 carolfs-ifusp mkinitcpio[1145]: -> Running build hook: [sd-shutdown]
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped dhcpcd on all interfaces.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unit dhcpcd.service entered failed state.
Apr 16 10:02:56 carolfs-ifusp gdm-Xorg-:0[336]: (II) NVIDIA(GPU-0): Deleting GPU-0
Apr 16 10:02:56 carolfs-ifusp gdm-Xorg-:0[336]: (EE) Server terminated successfully (0). Closing log file.
Apr 16 10:02:56 carolfs-ifusp gdm[295]: Freeing conversation 'gdm-password' with active job
Apr 16 10:02:56 carolfs-ifusp gdm[295]: Freeing conversation 'gdm-launch-environment' with active job
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped GNOME Display Manager.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Permit User Sessions...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Permit User Sessions.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Basic System.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Basic System.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Slices.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Slices.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping User and Session Slice.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Removed slice User and Session Slice.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Paths.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Paths.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Timers.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Timers.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily man-db cache update.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily man-db cache update.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily verification of password and group files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily verification of password and group files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily rotation of log files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily rotation of log files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily Cleanup of Temporary Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Sockets.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Sockets.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Device-mapper event daemon FIFOs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed Device-mapper event daemon FIFOs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping LVM2 metadata daemon socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed LVM2 metadata daemon socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping D-Bus System Message Bus Socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed D-Bus System Message Bus Socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping System Initialization.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target System Initialization.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Apply Kernel Variables...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Apply Kernel Variables.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Setup Virtual Console...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Setup Virtual Console.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Encrypted Volumes.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Encrypted Volumes.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Load/Save Random Seed...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Update UTMP about System Boot/Shutdown...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Remote File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Remote File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Load/Save Random Seed.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Update UTMP about System Boot/Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Create Volatile Files and Directories...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Create Volatile Files and Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Local File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Local File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/1000/gvfs...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/120...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /boot...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /home...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting Temporary Directory...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-partuuid/748828e6-d06b-4dc9-a1ee-94e2bf6e2d41.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-partlabel/swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-id/wwn-0x5000c500242cde85-part2.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-id/ata-ST3500418AS_5VM96G8V-part2.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-uuid/59c506eb-3a40-4eae-8048-317bcc3d00fb.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap Swap Partition.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/1000/gvfs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted Temporary Directory.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/1000...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/120.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /boot.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping EFI System Partition Automount.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unset automount EFI System Partition Automount.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/1000.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /home.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Unmount All Filesystems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Unmount All Filesystems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Local File Systems (Pre).
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Local File Systems (Pre).
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Remount Root and Kernel File Systems...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Remount Root and Kernel File Systems.
Apr 16 10:02:56 carolfs-ifusp mkinitcpio[1145]: ==> Build complete.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Started Generate shutdown-ramfs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Final Step.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Final Step.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Power-Off...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Shutting down.
Apr 16 10:02:56 carolfs-ifusp systemd-shutdown[1]: Sending SIGTERM to remaining processes...
Apr 16 10:02:56 carolfs-ifusp systemd-journal[166]: Journal stopped
Last edited by CFS (2014-05-08 12:57:13)

Thank you for your replies. Shutdown now doesn't turn the computer off either. About the type of system, I think it was custom built. This is a new install from Monday, so I didn't update the kernel. Poweroff, suspend and hibernate have never worked. The requested output:
$ uname -a
Linux carolfs-ifusp 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
$ pacman -Qi linux
Name : linux
Version : 3.14.1-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.14.1
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 71136.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Mon 14 Apr 2014 03:42:52 PM BRT
Install Date : Mon 14 Apr 2014 07:50:11 PM BRT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

AMD OverDrive Center vs. MSI ControlCenter

Which one is better to use?
I don't Overclock yet, but if and when I do, which is better to use or do i use both? Do you have a better suggestion & can up point me in the right direction if you do? Either way, I would appreciate your help & knowledge. Thank you!

Quote from: teafie on 19-June-11, 17:36:27
Better overclocking is acheived in the bios.
A very good guide for overclocking your ph2x6 can be found on the xbit labs web site.
I have no time for software overclocking, but amd overdrive 4.0.4 comes with goodly stability tests.
You can get overdrive 4.0.4 from the guru of 3D
Thanks for the post. Could you provide the link to that guide on xbit Labs? I got the AOD 4.0.4. works great.

Suspend and resume hook help

I'm writting a hook for suspend/resume, however I've run into some trouble.
So basicly what I need is:
a) A script to stop and start mpd [done] (That's easy. Just setup mpd.conf's RUNAS user to the desired username and regardless that the mpd command is run as root it will run as the desired user)
b) A script to stop and start oss4 since it fucks up after suspend [DONE] (piece of cake...)
c) A script to view my wlan0 essid, save it to file, killall dhcpcd (the dhcpcd part, at least, is easy) and on resume to enter it again and run dhcpcd. [Need help]
(In order to start my wifi I use iwlist wlan0 scanning, I choose the desired network and then iwconfig wlan0 essid DESIREDESSID and dhcpcd wlan0, but after suspend wlan0 looses it's settings so I need to make a script to enter them back.)
I was thinking about something like iwconfig wlan0 | grep ESSID, but it returns (as expected)
[dheart@lightbringer ~]$ iwconfig wlan0 | grep ESSID
wlan0 IEEE 802.11g ESSID:"ESSID_NAME"
I'm quite new at bash scripting and I have no idea how to write something that complex.
d) Also sonata, my desired mpd frontend looses connection to mpd if mpd is restarted while it is running. So I need something to stop sonata (that's easy - killall sonata) and after that to run it (but not as root)... So, my question is how to run a program as normal user from /etc/pm/sleep.d/ hook [NEEDHELP].
Here's what I've written so far
#!/bin/bash
case $1 in
hibernate)
echo "Killing mpd and stopping oss4"
mpd --kill & /etc/rc.d/oss-linux-free stop
suspend)
echo "Killing mpd and stopping oss4"
mpd --kill & /etc/rc.d/oss-linux-free stop
thaw)
echo "Starting oss4 and mpd"
/etc/rc.d/oss-linux-free start & mpd
resume)
echo "Starting oss4 and mpd"
/etc/rc.d/oss-linux-free start & mpd
*) echo "Wrong call"

you're probably better off starting network autodetection on resume, I know most people suspend to go between, for example, home and work, or home and the intarwebz cafe, and seldom suspend and resume in the same location reliably.

AMD OVERDRIVE TMPIN2

Hi
On AMD OVERDRIVE what is the tmpin1,2,3;
phenom 8450
sapphire 4850
msi k9a2 cf bios 1.7
muskkin 5 5 5 18 at 400 MHZ
all stock
The tmpin2 shows 128 C is it right;
i have two fans one for in and one for out ( for the air )

False reading, simply ignore it.
They read a sensor-port that isn't connected.

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

8i EE Setup.exe crash - XP Pro and AMD X2 CPU

When trying to install 8i on my XP Pro (SP2) box with and AMD X2 3800+, setup.exe crashes as soon as it is run. I've tried the fix for P4s (renaming the symcjit.dll instances), but to no avail. This happens wherever the setup.exe is run from.
Has anyone encountered this problem and managed to fix it?

Hope you realize that Microsoft has changed a number of the kernel APIs with XP. Oracle8i was written to older APIs and you may experience crashes, possibly at random, simply because you are trying to run things in an incompatible way.
(I see this as a bit like buying a new car chassis and putting in an old engine and transmission - there is a lot of tinkering required to get the motor mounts to match.)
In my experience, people who have made 8i work on XP Pro have generally upgraded XP from an older OS and have been lucky enough to have the old APIs still lying around.
Suggest you try moving up to a newer version of Oracle and, if necessary, use the compatibility parameter to keep compatibility.

Your Voucher has been suspended and can no longer be used !!?

Hi guys,
I have purshased 2 vouchers for 2 Java exams it's been a while, they have both expiration date at 31-AUG-2013 , lately when I tried to apply them for my exam at PearsonVue a message appears and tells me that "the voucher is SUSPENDED and can no longer be used"
I don't understand what is going on and they dont even tell why it is suspended
is there something I can do about it? thanks in advance
- Kacem

I'm pretty sure that for this situation, you'll need to contact Oracle Certification Support Oracle University - Support Form. If it is the issue that I suspect, Oracle Certification Support will need to assist. Please provide the voucher numbers when you contact Oracle, they will need to know the voucher numbers and any purchase info you have - where did you purchase, how did you pay, can you provide a receipt?
Regards,
Brandye Barrington
Certification Forum Moderator

Bit locker encryption requests key unless I suspend and resume the encryption

I am rolling out new computers with Windows 7 Enterprise OS on them. I am installing bit locker encryption on them. For some reason with this group of computers, and I recently rolled out a different batch of computers without this problem,
after encrypting, I must suspend and resume bit locker or upon restart of shutdown and start the user is prompted for the bit locker encryption key.

Hi,
Could you please tell some more details about the issue? What do you want to achieve here? To enable bitlocker without the prompt of the startup key? If it is , then please take a check if we have Require
additional authentication at startup policy enabled.
Besides, could you please have a share for how do you enable bitlocker?
And here is a guide for bitlocker in Windows 7, just for reference:
BitLocker Drive Encryption Step-by-Step Guide for Windows 7
BitLocker Drive Encryption in Windows 7: Frequently Asked Questions
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

Of note there is a new AMD Catalyst Omega driver released earlier in the week that brings 5K resolution to AMD graphics cards. Here is the link (support.ad.com/en-us/download) to the AMD site. But none of these work with my iMac (Retina 5K, 27-inch, Late 2014), Windows 8 bootcamp.
Please advise.
Thanks in advace.

Java Thread suspend and resume problem

Hi,
I am trying to write a program to implement thread suspend and resume using wait() and notify without using the deprecated methods like resume and suspend.
I have written the following program which compiles but when I run it hangs without terminating. There seems to be some logic error but I am not able to catch it.
Please help
public class TestSuspendResume {
public static void main(String[] args) {
    MyThread m1= new MyThread("--One-- ");
    MyThread m2= new MyThread("--Two-- ");
    m1.suspendMe();
    try {
      Thread.sleep(1500);
      m1.t.join();
      m2.t.join();
    } catch(InterruptedException e) {
      e.printStackTrace();
    m1.resumeMe();
    System.out.println("Now : end main thread");
class MyThread implements Runnable {
boolean suspend = false;
Thread t;
MyThread(String name) {
    t = new Thread(this,name);
    t.start();
void resumeMe() {
    suspend = false;
    notify();
void suspendMe() {
    suspend = true;
public void run() {
    try {
      for(int i=0;i<20;i++) {
        System.out.println("Now : "+Thread.currentThread().getName()+i);
        Thread.sleep(200);
        synchronized(this) {
          while(suspend)
            wait();
    } catch(InterruptedException e) {
      e.printStackTrace();
}

Thanks for that response. I figured out that was the problem in the logic. I have modified the code to make it simpler but it is still hanging.
public class TestSuspendResume {
public static void main(String[] args) {
    MyThread m1= new MyThread("--One-- ");
    try {
      m1.suspendMe();
      Thread.sleep(1000);
    } catch(InterruptedException e) {
      e.printStackTrace();
    try {
      m1.resumeMe();
    } catch(Exception e) {
      System.out.println("ASASAS");
      e.printStackTrace();
    try {
      m1.t.join();
    } catch(InterruptedException e) {
      System.out.println("WOWOW");
      e.printStackTrace();
    System.out.println("Now : end main thread");
class MyThread implements Runnable {
boolean suspend = false;
Thread t;
MyThread(String name) {
    t = new Thread(this,name);
    t.start();
void resumeMe() {
    if(suspend==true) {
      suspend = false;
      notify();
void suspendMe() {
    suspend = true;
public void run() {
    try {
      for(int i=0;i<20;i++) {
        System.out.println("Now : "+Thread.currentThread().getName()+i);
        Thread.sleep(200);
        synchronized(this) {
          while(suspend)
            wait();
    } catch(InterruptedException e) {
      System.out.println("-- E In run method -- "+e.getMessage());
}

FSB OCing kills suspend and AMD Overdrive

Similar Messages

Maybe you are looking for