FSB only 100 on Satellite 2410-304S

Why ist the FSB for memory only 100MHz instaed of 133MHz? The chipset i845 can handle 133. Is there any possibility to change it?

Hi
I dont know where you found the information about 100 MHz and 133 MHz of memory FSB but this value has nothing to do with the chipset. The processor FSB supports 400 MHz.
What you can do is to use another supported memory modules.
I have found a info that these memory modules are compatible:
PC2100 128MB (PA3126U-1M12)
PC2100 256MB (PA3127U-1M25)
PC2100 512MB (PA3164U-1M51)

Similar Messages

KT3V + AthlonXP 2800 = FSB only 100 mhz

Hi There,
I had lately problem with my Radeon 9200. Before I bought Radeon 9600 I updated my AMIBios to the latest (1.B0). Now I cannot rise FSB over 100 mhz without crash. (Before it was 166 mhz).
MSI Fuzzy Logic 'auto overclock' will rise FSB = 120 Mhz, but no higher.
Last night I updated my Bios back to 1.70 but it doesn't help.
How I get back my 12.5 x 166 mhz=2 Gb Athlon,
Does anyone knows?
Thanks for all help.

Hello,
Fredrik, Chris, Sharp & Wonkanoby
Thank you very many
After installing new power supply, removing RAM stick and clearing CMOS (again) I went Bios Set Up and put that FSB back 166 mhz... and.. IT WORKS!!
Thanks again, without you guys I would give up..

Memory expansion on Satellite 2410

Hi
I am planning to expand the memory of my Satellite 2410-601. It has 256 MB DDR at present. I am planning on using one more 256 memory module to expand the total memory to 512 MB.
What I would like to know is whether I can use any of the DDR memory modules available in market? Would there be any compatibility issues?

Hi
Do you know this site?
http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=5548&ft=m&st=3
Here you can find the details about compatible memory modules for Satellite 2410-601.
It seems that the notebook is able to handle the 200-Pin PC2100 (266MHz) DDR SODIMM memory modules!!!
You could upgrade the memory up to max 1GB (2x 512MB)
>Would there be any compatibility issues?
Generally you shouldnt have any compatibility issues. Its only important that you use the supported modules.
Greetings

Memory upgrade on Satellite 2410

Hi.
I have a Satellite 2410-703 and i'd like to upgrade my ram to 1024. Now there are two SoDimm 256Mb@266Mhz (Pc2100).
My question is: may I use other Kingston module at 333 or 400 Mhz?
Are they compatible?
Thanks a lot.
Antonio

Maybe this site could help you:
http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=6083&ft=m&st=3
Generally you can also use the RAM modules with the 400Mhz speed because the notebook supports an FSB 400Mhz.
But its important that you use the right module specifications like 200-Pin PC2100 DDR SODIMM
Hopefully I coudl help you

Hard Disk Upgrades on Satellite 2410

I know that I can just stick any drive that will fit in, but my question is:
Can I just use the recovery CD that came with my laptop to re-install windows XP onto the new hard disk, or do I have to get a seperate copy of XP?
The model of laptop is a Satellite 2410-something, and has 30Gb and I was thinking of going for a 80-100Gb disk.
Thanks in advance!

Hi James,
Your recovery CDs will work with whichever hard drive you choose to install.
With regard to your choice of drive please be careful with your choice of rotation speed. Your notebook has cooling only for the CPU heatsink so any extra heat generated by your hard drive will need to be able to dissipate naturally. The faster rotation speed on 5400 and 7200 RPM drives naturally generate more heat and this can cause problems for your notebook.
Obviously if you are not using disk intensive applications this can be lessened by allowing the hard drive to power down when not in use.
By the way I use a 5400RPM 80GB drive in my SA30 and the extra heat produced is only in evidence when I run a full virus/malware scan followed by a defrag and full image backup, and believe me the casing gets very hot indeed in the vicinity of the hard drive.
regards,

KT3 Ultra2-R ... Can't change FSB beyond 100

Dear all,
Just got my KT3 Ultra2-R with an Athlon XP2100, upgraded to 5.7 AMI BIOS, worked great, then made some changes to CMOS (forgot which ones), then couldn't boot.
When I finally booted and went to CMOS setup, it would not let me change the FSB to anything other than 100...that is, no options on the FSB when I hit enter (shrug).
Now, my system recognizes the CPU as an AMD XP 1500...blah. Tried everything...resetting CMOS with jumper, took out computer battery, replace 350 SmartBlue PSU with 400 Watt PSU, replaced Heatsink/cooler with better one, wiped contacts, nothing...it's not the temps, because my case idles at 29C chassis and 36C CPU temps. Even reflashed back to BIOS version 5.6, and still no go.
When I do "performance" settings in CMOS, it will give me 133 FSB, but my system will now be unstable. Weird thing was, before this "event", performance setting put it at 166 FSB :(
Anyway, my comp isn't dead....it just won't let me change the FSB. I called up ABS Computers where I bought this, and they said they are not responsible for damage caused from flashing BIOS...blah, whatever.
I just put out an order for an Asus A7N8X Deluxe motherboard and joined the NForce2 bandwagon, but if someone could give me some insight into what I could do about my motherboard, besides hang it on my wall, I'd certainly appreciate it.
Here are specs of my system:
MSI Kt3 Ultra2-R
Athlon XP2100
Geforce2 video card
soundblaster 5.1 Live
WD 120 Gig and WD 60 Gig
Liteon CRWD
Sony DRU-500AX
Q-Tech Quiet PSU 400 Watts
Nexus Heatsink/Fan
Windows XP Home

Thanks for the reply, but while checking out the other problem with the KT4V / Athlon 2400 Clock Speed Problem (above) who couldn't set his FSB beyond 100, but when he set it the multiplier to 12.5/13, he gets a 20X multiplier when he goes into Fuzzy Logic.
Well, guess what, I did the same thing (set my CPU multiplier in BIOS to 12.5/13, and lo and behold, I go into fuzzy logic, and my AMD XP 2100 is recognized as an AMD XP2600 running at 2000 megahertz...now someone explain that to me! I even check with SiSandra, and yup, it's seeing a 2000 megahertz processor. I even ran the benchmark tests on SiSandra, and it's on par with that processor.
However, my FSB is only 100, and thus, my memory benchmarks are about 25% below the norm for my DDR333 RAM chips (i guess because they are synchronized with the FSB, and probably running at 200 then).
Anyhoo, i'm tired of trouble shooting and figuring out what the hell is going on. The comp is extremely stable at 2000 megahertz at 100 FSB...don't know what else to do...so installing new motherboard tomorrow and report back later.

Service manual for Satellite 2410-603

Hello,
I have satellite 2410-603 model of laptop. And wanted to open it for changing display hinge. So if you could help me I will be very great full. I mean just tell where i can get the hardware maintenance manual for the same model. Else is there video available so that i open the laptop........? Help me.

Hi!
Service manuals that you mean are not public and only for ASPs (authorized service provider).
You can search with Google to find instructions how to disassemble this notebook. Maybe you will find something.
To be honest if you dont have experience with notebook disassembling ask a technician for help. This is a little bit tricky.
Bye

Satellite 2410-303 hangs when CPU cache level 2 was enabled

I have Satellite 2410-303 Bios version 1.40 and when i enable CPU cache level 2 the laptop dose not work and still hang.
So now I only enable CPU cache level 1 and disable cache level 2 so the laptop run slowly.

Hi
Well, what to say, the Level 2 cache is an external CPU memory.
Possibly there is something wrong with the CPU? Who knows
Did you try to update the BIOS? Check if its possible and if the newer BIOS version is available.
Sorry but I cannot suggest any other solutions because for me it looks like an hardware problem and in such case the ASP help is needed.
Best regards

Satellite 2410-404: RAM Extension general Questions

There are two two memory modules(256+256) installed on my notebook Satellite 2410-404. There are two memory slots on my notebook. I want to extend the memory, but I could not find the answers to my questions though i searched in the manual, and at this website and this forum... My questions are
1. Can I extend memory by 256 MB by exchanging the 256 Memory module by 512 MB module? What kind of memory module should i take?
or
2. Schould i change both memory modules simultaneously? What kind of memory module should i take?
3. What can i do with the old memory modules?
Thank you in advance,
Vladimir

> The fact is that you can upgrade the memory to max:
> 1024MB.
> In this case you can use max 2x512MB memory modules.
I am really confused now because
1. in the printed manual i found the following text: "You can install 128MB or 256MB memory modules in both memory slots to extend RAM upto 512 MB"
2. Kingston site says the same: one can extend RAM upto 512 MB
http://www.ec.kingston.com/ecom/configurator/modelsinfo.asp?SysID=12951&mfr=Toshiba&model=Satel lite+2410&Sys=12951-Toshiba-Satellite+2410-404&distributor=0&submit1=Finden
3. Product details say that the RAM can be extended upto 1024MB
http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=DE&PRODUCT_ID= 21161&DISC_MODEL=1
Whom shoud i believe? The printed manual from Toshiba? Or the Toshiba website?

What's the best way to get Wireless on Satellite 2410-504?

Hi Guys,
I hope someone can help...I have a Satellite 2410-504 which is nearly 4 years old pretty good spec for time. I thought it had wireless built in...it has on/off switch and LED light, however I cannot find it in device manager...on removing undercover for wireless it is empty....I have bought a Belkin Cable router for NTL cable....what would be the best option to make it wireless or is it already...could someone advise.
Scott
[Edited by: admin on 22-Jan-06 21:38]

Hi
As far as I know the wireless card is optional on this unit. This means that you can upgrade your notebook with the miniPCI wireless card which you can put into the wireless slot.
You can use these cards:
Wireless LAN Mini PCI Card (2,4GHz, 802.11a/b) PA3273U-1MPC
Wireless LAN Mini PCI Card (2,4GHz, 802.11b) PA3212U-1MPC
Bye

Is CPU upgrade on Satellite 2410-303 possible?

My Satellite 2410-303 has Pentium 4 Mobile 1.7GHZ processor. I want to upgrade its processor to Pentium 4 Mobile 2.8GHZ. I think that it is possible because its upper models have faster processor and that is unique difference between them.
Please, help me for this question and tell me is it possible?

Hello
You will be very lucky if someone has so good experiences with CPU upgrade on Satellite 2410 but on this forum you can find very nice comments about that. I have founded just two of them but very interesting. Check it out!
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=87488
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=59708
Bye

Satellite 2410-413: USB2 PCMCIA card doesn't work

Good morning. It is my first time on a forum, and my English is poor.
I have tried to install a PCMCIA card with 4 USB-2 ports (hw & sw) on my Satellite 2410-413 in order to use a DTV dongle (hw & sw).
It will not work: The ports seem to be declared all right in the computer but in effect, a simple 64 MB USB-2 memory key [a Sony "micro-vault" key), will not work, and neither will the Winfast DTV dongle.
Paradoxically, both the mem key will work on any of the three USB-1 ports, and the DV dongle will light up on any USB-1 port. The PCMCIA card with 4 USB-2 ports is new. I cannot locate the origin of the problem.
Would any one help me with this question?
Thank you in aadvance for your reply. Here is (maybe ?)
Another way of formulating the question: how are USB ports managed by the system?

> Hello Rasta
>
> Sorry but I think that this question should be the
> right one for PCMCIA producer. Try to visit their
> support page. Maybe you will find some answers.
> Believe me on this way it is not easy to say why this
> happen. Toshiba is maybe responsible for PCMCIA card
> functionality but not for used card.
>
> Good luck!
Many thanks to you Mike30.
I have a couple of ideas now:
- supplying the USB2 card with additional power (ie other power than computer), (but how?)
- uninstalling and further, re-installing the USB2 "Truewin" PCMCIA card bus, and after that trying the "leadtek-brand" DTV sw.
Cheers,
Philippe

File content conversion only 100 characters read from source..

Hi,
In my case I have a sender channel with file content conversion set as follows;
Recordset structure : Record, 1
sequence: ascending
Key field type : String (case sensitive)
record.fieldseparator : 'nl'
record.fieldnames : Data
ignorerecordsetname: true
Idea is in ECC, when a custom program is run, it reads the shipment data and builds an xml file with data in various nodes like;
<shipmentId>6767667</shipmentId>
<DelvText>hjysks sag fhdososlhfiof </DelvText>
Now all this data is converted to a single string entry under tag called <Data> and passed on to the third party system by PI using above conversion.
And the resulting file will have all the data like this;
- <Record>
<Data><?xml version="1.0" encoding="UTF-8"?></Data>
</Record>
- <Record>
<Data><ShipmentId>6767667</ShiomentId>.........</Data>
It so happens that the data that is populated in the <DelvText> by the program is lost during conversion. I get only first 100 characters in the resulting above mentioned XML after the file content conversion happens. rest of the string is lost. I can see all other data perfect except for this long text.
This is the data I enter in the delivery's header text under shipment instruction field. I debugged the program and see that the entire text is indeed filled but gets lost after the file conversion happens !!
What can be the reason ?
thnks

Stefan, I appreciate your concern, thanks. But this is an already working interface and I cannot change it and can only assist with minor data mapping changes and troubleshooting such issues.
Scenario is simple, ECC has to send shipment data to third party via PI.
The shipment data has to be sent as an XML file with a single <Data> tag as I showed to you earlier.
It is so weird that when I type my delivery text less than 100 characters I can see that in full text in my XML file but only when the text is more than 100 characters, the XML has only 100 characters and it is passed to the third party like that and so third party is consdering this as incomplete info.
Would help if you can think and let me kjow what may create this kind of an issue or if you can point me where to look for issues.
thnks

NEC ND-6500A DVD+-R/RW drive in Satellite 2410-504?

Can anyone tell me if an NEC ND-6500A DVD+-R/RW drive will work in my Satellite 2410-504 notebook? I have tried fitting one supplied new but the BIOS did not recognise it and gave an IDE #1 error message on boot up. I don't know yet if this was a faulty drive or if the drive is just not compatible. Any help with this would be greatly appreciated.

Hi
you might find some useful information here:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3720&messageID=11933#11933
BR
Tom

Satellite 2410 unlocking DVD region?

Hi a friend of mine has a Toshiba Satellite 2410 and a Mat****a DVD-RW combo drive. Unfortunately the drive is locked to region 1 and he needs region 2 but Windows wont allow any more changes. Is there any official or unofficial way to fix or force this drive to play region 2 DVDs??
cheers,
Richard S.

Hi
Well, as far as I know on the official way you can change the region settings 5 times.
Furthermore you can check some other topics in the forum.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5511&messageID=18805#18805
Bye

FSB only 100 on Satellite 2410-304S

Similar Messages

Maybe you are looking for