Fsbtodb macro in ufs_fs.h does not return correct disk address
I'm using fsbtodb to translate the file inode block address to file system block address.
What I've observed is fsbtodb returns corretct disk address for all the files if file system size < 1 TB.
But, if ufs file system size is greater than 1 TB then for some files, the macro fsbtodb does not return correct value, it returns -ve value
Is this a known issue and is this been resolved in new versions
Thanks in advance,
dhd
returns corretct disk address for all the files if file system size < 1 TB.and
if ufs file system size is greater than 1 TB then for some files, the macro fsbtodb does not return correct value, it returns -ve valueI seem to (very) vaguely recall that you shouldn't be surprised at this example of a functional filesize limitation.
Solaris 9 was first shipped in May 2002 and though it was the first release of that OS to have extended file attributes I do not think the developers had intended the OS to use raw filesystems larger than 1TB natively.
That operating environment is just too old to do exactly as you hope.
Perhaps others can describe this at greater length.
Similar Messages
-
Res.getPathTranslated() does not return correct URL of the page requested
Hi,
The res.getPathTranslated() statement in the below code (in doFilter method) does not return the correct URL of the requested webpage.
Whenever a web page is accessed using a return statement (eg : return "nextPage"; ) inside a button's action method or a hyperlink's action method, the res.getPathTranslated() returns the URL of the current webpage instead of returning the URL of the webpage that is actually requested.
For example if there is a button on the page http://localhost:29080/MyJaas/faces/firstPage.jsp
And the button_action() is as follows
button_action()
return "nextPage";
The res.getPageTranslaged() returns "http://localhost:29080/MyJaas/faces/firstPage.jsp" instead of "http://localhost:29080/MyJaas/faces/nextPage.jsp"
However, if the webpage is requested by populating the URL property of the hyerlink in creator IDE, the res.getPathTranslated() returns the correct (requested) web page.
How to make res.getPathTranslagted() return the correct URL when the webpage is accessed from hyperlink's / button's action method?
I know that the explation is not very clear, so please bear with me. Let me know if you need more clarificatons. Thanks in advance for showing interest in this issue.
And by the way, the code below is the same as that used in Jaas Authentication tutorial :- http://developers.sun.com/prodtech/javatools/jscreator/reference/techart/2/jaas_authentication.html
package jaasauthentication;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.http.HttpSession;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class SecurityFilter implements Filter{
/** Creates a new instance of SecurityFilter */
private final static String FILTER_APPLIED = "_security_filter_applied";
public SecurityFilter() {
public void init(FilterConfig filterConfig) {
public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws java.io.IOException, ServletException{
HttpServletRequest req = (HttpServletRequest)request;
HttpServletResponse res = (HttpServletResponse)response;
HttpSession session = req.getSession();
String requestedPage = req.getPathTranslated();
String user=null;
//We dont want to filter certain pages which include the Login.jsp/Register.jsp/Help.jsp
if(request.getAttribute(FILTER_APPLIED) == null) {
//check if the page requested is the login page or register page
if((!requestedPage.endsWith("Login.jsp")) && (!requestedPage.endsWith("Register.jsp")) && (!requestedPage.endsWith("Help.jsp"))){
//Requested page is not login.jsp or register.jsp therefore check for user logged in..
//set the FILTER_APPLIED attribute to true
request.setAttribute(FILTER_APPLIED, Boolean.TRUE);
//Check that the session bean is not null and get the session bean property username.
if(((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1"))!=null) {
user = ((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1")).getUsername();
if((user==null)||(user.equals(""))) {
res.sendRedirect("Login.jsp");
return;
//deliver request to next filter
chain.doFilter(request, response);
public void destroy(){
}Guys any solution for the above problem?
Right answer fetches 10 duke dollars.. -
MessageChoice does not return correct value
Hi
I am problem with MessgeChoiceBean's improver beharior
For the first time it retunrs blank and subsequently In one page if I select Yes, it returns No.
In another page it does not return any thing for the first two selections. And I reciev flip values.
I ran VO outside, VO is returning correct values.
MessageChoice attributes and associated PPR:
Data Type: Varchar2
Initial Value: N
Pick List view Definition: oracle.apps.xxx.docs.common.lov.server.YesNoVO
Pick List View Instance: YesNoVO3
Pick List Display Attribute: Meaning
Pick List Value AttributeL LookupCode
ActionType: firePartialAction
Event: handleNewLocationFlagChange
Parameter Name: newLocationFlag
Parameter Value: ${oa.CustomerInfoVO1.NewShipToLocationFlag}
ProcessParameterForm Code:
if ("handleNewLocationFlagChange".equals(event))
String newLocationFlag = pageContext.getParameter("newLocationFlag");
Serializable[] parameters = { ""+newLocationFlag};
Class[] paramTypes = { String.class};
am.invokeMethod("handleNewLocationFlagChange", parameters, paramTypes);
VO definition:
select LOOKUP_CODE,MEANING
FROM ONLINE_DOCS_LOOKUPS
WHERE ONLINE_DOCUMENT_CODE = 'ALL'
AND LOOKUP_TYPE = 'YESNO'
ORDER BY ATTRIBUTE1
View output:
LOOKUP_CODE MEANING
N No
Y Yes
I have quite a bit number of columns to change render property.
Any help will be appreciated.
Thanks
PrasadYour question is not clear, are you saying the values in the messageChoiceBean is not displayed properly. As far as I can see from the definition the poplist picks the values from a lookup(Yes, No) values and has a PPR action associated with it. Did you check what this method handleNewLocationFlagChange is doing in the AM ?
-
NSV w/RT FIFO Read does not return correct value
I have a cRIO which is hosting a NSV w/ RT FIFO enabled. I can observe its value in the DSM.
I have a LabVIEW exe that reads this NSV with a SV node on the diagram. This read value is incorrect.
If a run the same vi from the development environment then the correct value is read. If I remove the RT FIFO option then
the exe version will work correctly. According to the NI SV white paper, each reader of a NSV w RT FIFO recieves its own
client side buffer so there should not be any interference. It should be mentioned that I am also creating a SV reference to this same NSV on the cRIO
for read only use.Hello,
Have you tried using a Network Published shared variable to communicate between the host and target? This architecture would use a Network Published Shared Variable in a normal priority loop to pass data to a Single Process RT FIFO enabled shared variable on the target to move data to the time critical loop. Is the cRIO that you are accessing the only one present on the network? Also,. if you slow down your loop speeds, do you get correct values?
-Zach
Certified LabVIEW Developer -
FM HRTRV_IF_GET_TRIP does not return USERDATA
Hi, it's me, yet again...
I'm using the FM "HRTRV_IF_GET_TRIP" in FITE_VC_GENERA_DATA in a post exit of comp-controller method "ON_SHOW" to get the structure/Table USER/PTK99 from the TE Cluster for binding to the context afterwards. At least that's the plan. The FM does not return me the data I expect in parameter USERDATA, although there is data in the TE Cluster and within the FM, I can see the global Table USER being filled whilst the macro RP-IMP-C1-TE. But this data is not further process neither is seems the strucutre USERDATA to be touched at any point of the FM. Am I calling the FM 'wrong' in any way? I'm close to making an implicit enhancement at the end and forcefully fill userdata from user....
Too long, didn't read: USERDATA is not returned filled --> WHY?
CALL FUNCTION 'HRTRV_IF_GET_TRIP'
EXPORTING
employeenumber = wd_assist->GS_COMMON_RFC_INPUT-employee_number
tripnumber = lv_tripno
* LANGUAGE = SY-LANGU
* CALCULATE_AMOUNTS = 'X'
* GET_TRIP_FROM_MEMORY = ' '
IMPORTING
* FRAMEDATA =
* STATUS =
USERDATA = ls_user " should contain cluster values, but it doesn't
tables
* RECEIPTS =
* ADDINFO =
* GUESTS =
* TEXT =
* MILEAGE =
* STOPOVER =
* DEDUCTIONS =
* COSTDIST_TRIP =
* COSTDIST_STOP =
* COSTDIST_RECE =
* COSTDIST_MILE =
* AMOUNTS =
* ADVANCES =
return = lt_bapiret " says method was executed successful
In the insides of the FM:
* IF CALCULATE_AMOUNTS <> 'X'. "XJY
* import the trip because it was NOT imported before
READ TABLE T_PERIO INDEX 1.
TE-KEY-PERNR = T_PERIO-PERNR.
TE-KEY-REINR = T_PERIO-REINR.
TE-KEY-PERIO = T_PERIO-PERIO.
TE-KEY-PDVRS = T_PERIO-PDVRS. " Once this line is executed, the global table USER is fileld with the data I expect
RP-IMP-C1-TE.
* ENDIF. "XJY
if t_perio-abrec = '0' or
t_perio-abrec = '1'.
clear te-key-pdvrs.
import beler from memory id te-key.
endif.
I hope somebody has ever used this one and can tell me what I'm doing wrong...
Cheers, Lukasgood to know. that you have already implemented similar thing. In our case if employee want to pick a manager he will only be given option from a custom table entries.
They way i was thinking was that there will be a checkbox that will say "Override Approver"
and when that will be checked text filed will be enabled with search help restricted to custom table entries.
I have one question. When I am enhancing FITE_VC_REVIEW and adding field in that view, I m finding it hard to track it. Looks like adding to General data screen will be much easier.
R u using ABAP memory to track field and use it at SMOD or you are using SAP memory ?
I am just starting on this one and not expert at webdynpros.. will ping you if i need any more help
and yes i just added following like in FM HRTRV_IF_GET_TRIP
read TABLE user INTO userdata INDEX 1
to get it to load userdata.. -
WebI does not return failed when scheduling a report which only holds parti
WebI does not return failed when scheduling a report which only holds partial results.
We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
When running the report manually, it works file.
The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
The version we have is BOXIR2-SP4.
Ok. Issue identified.
The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
Edited by: Karlgren Michael on Sep 17, 2009 1:22 PMHi ,
Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
Problem Statement:
Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
Recomended Solution:
Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
Thanks
Salini -
My PC does not return to the source document I print from
I had a setting control for
this in XP but can't find the page I got it from.<o:p></o:p>
<o:p> </o:p>
In ANY application or browser
this happens. I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from. This is maddening and causes all kinds of issues.
Searching the web for this now produces nothing and I know I can't be the
only person who experiences this.<o:p></o:p>
<o:p> </o:p>
This is a Windows 7 platform
in a networked business environment. I'm running the Classic Menu add-in
from Addintools because I can't stand the ribbon and have never liked it.
In Windows 7, I'm running a couple of other add-ins that restore the XP
use of the task bar properly so one can work efficiently.<o:p></o:p>
<o:p> </o:p>
None of the add-ins are what
is causing this issue because I'd run the same Classic Menu add-in on the XP
box and it had the same issue until I found the work-around that I can't
remember now.<o:p></o:p>
<o:p> </o:p>
Has anyone else experienced
this issue?<o:p></o:p>
<o:p> </o:p>
Jeff Lynch<o:p></o:p>Hi,
"I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from."
If I'm not misunderstanding, do you mean that the workbook is automatically closed after you print from that workbook, right?
As I know, if we use the default ribbon in Excel, no matter in Windows XP or Windows 7, the opened workbook should be stay opened after you print from that Excel workbook.
So the question is that: what is the version of office? What is the Classic Menu add-in you're running now? Did you manually download and install it to your system? Could you please share a picture with us about the add-ins you're using?
Yolanda Zhu
TechNet Community Support -
Very Very Urgent Issue: Restricted Key Figure does not return any data
Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any dataHi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW -
Search does not return my documents
Hi Gurus,
I have created few documents using CM SDK. I could able to see these documents using IFS browser.
Now I wrote content search method to search document content.When I search for "cmsdk" string it returns 13 documents.But when I search for a string in the document, I created , for example a text like "struts" it does not return any result , though this document I can see in IFS browser.What could be the reason?.
BTW I didn't create any FORMAT type while I am storing the document. Can any one point me to a document where I can find some instructions on "must and should things to do before search".
I am using CM SDK 9.0.3.
Thanks in advance.
Giri.have you set the indexing on?
-
My Mini Ipad Does not return to the Home screen after I press the Home button
My Mini Ipad Does not return to the Home screen after I press the Home button. I have also tried to turn it off and it is not responding.
Check the following:
1. Check credit card number
2. Check security code
3. Billing Address must be the same as credit card
4. Check expiry date
5. Make sure you have sufficient fund -
Does not return to the Home screen after you press the Home button
The buttons do wear out, and when they do you'd need to get the phone serviced.
-
IWEB previous does not return to previous page
I am trying to get back to the last page with the Previous option in the Link setup. I do not know why it does not return to the previous page but some other pages.
The following script is courtesy of Cyclosaurus. Use it in an HTML snippet:
<button type='button' target='_parent' onclick='javascript:history.back();' > Previous Page </button>
OT -
WB_RT_GET_JOB_METRICS does not return values
DB v 10.2.0.2
OWB repository/client v 10.2.0.3
A DB function has a call to the Control Center transformation WB_RT_GET_JOB_METRICS to extract and preserve the metadata of number of records inserted/updated/deleted in a DB table.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1.
The control center transformation WB_RT_GET_JOB_METRICS does not return any values when used under the Post-Mapping Process(mapped to the DB function describe above) in a Map.
The input parameter ;Audit Id' to the Map is passed from a calling Process Flow. The following query is used to retrieve the Audit Id of the Map.,
SELECT execution_audit_id
INTO l_audit_id
FROM ALL_RT_AUDIT_EXECUTIONS
WHERE parent_execution_audit_id = P_AUDIT_ID;
And the retrieve l_audit_id is passed to the WB_RT_GET_JOB_METRICS transformation to extract the number of records inserted/deleted/updated with the execution of the map.
Gurus, please advice if the approach is appropriate to retrieve the number of records inserted/deleted/updated by the execution of the map. If not, any alternate method.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2. The control center transformation WB_RT_GET_JOB_METRICS returns values when used in a standalone pl/sql block with the appropriate audit_id.
Is this because the metadata for the Map execution is complete, whereas in the earlier attempt, the transformation is called within the map using the Post-Mapping process.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3. Since the option 1 did not return any value, tried other option of calling/executing a transformation(call the the DB function mentioned earlier) after the Map activity is successful in a ProcessFlow. Here, the transformation does not seem to be executing, any tips of correcting this issue.
Request the forum for some helpful tips to resolve the problem. TiA (Thanks in Advance) for the response.
Message was edited by:
user599655In a process flow, passed the pseudo variable to a transformation to run the WB_RT_GET_JOB_METRICS after the map execution. I am not sure if this is the best solution, but it worked for me.
Still trying to figure how to use the pre-defined transformation when working on expression.
Thanks. -
When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
Mockery context = new Mockery();
final MessageListener messageListener = context.mock(MessageListener.class);
final Latch latch = new LatchImpl();
final String prefix = "test" + System.currentTimeMillis();
context.checking(new Expectations() {
oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
will(new CustomAction("release latch") {
@Override
public Object invoke(Invocation invocation) throws Throwable {
latch.unlatch();
return null;
final Connection connection = createConnection(null, null);
Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
connection.start();
Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
final MessageConsumer consumer = session.createConsumer(wildcardTopic);
consumer.setMessageListener(messageListener);
MessageProducer producer = session.createProducer(null);
producer.send(destination, session.createTextMessage("MSG1"));
latch.await(5000);
connection.close();
Thread.sleep(5);
context.assertIsSatisfied();Check where your MDB sends the [response] messages to.
-
OCIStmtExecute does not return immediately when client is busy.
Hi.
I'm testing a very busy multi-threaded client server that consistently generates
a large number of simple queries through oci. The problem is that, when the
server(client) is busy, OCIStmtExecute does not return immediately in
non-blocking mode.
Of course I have set non-blocking mode and OCIStmtExecute does return
OCI_STILL_EXECUTING immediately when the server is not busy. But
when log rotation occurs which concatenates a large text file (~500MB)
onto an even larger text file (up to several giga bytes), or when I simply copies
or concatenates large text files manually, OCIStmtExecute returns very slowly.
(roughly about after 100~200ms)
However, while log rotation takes place, everything else including other oci
calls that come before OCIStmtExecute (prepare, define) return fast. So
for me it really seems that only OCIStmtExecute becomes extremely slower
when local server (especially the disk) is busy.
Is there any way to let OCIStmtExecute immediately return all the time?
Thanks in advance.Yes, I knew that OCIStmtExecute would be the only function that causes such
delay and that was why I traced that call. And so far, I checked several times
what happens at the exact moment on the server but everything was ok.
Actually OCIStmtExecute becomes slower exactly when crontab-ed log rotate
occurs so I think this delay must be a client-side problem for now.
This server is quite busy and has to respond fast, so it is important to
guarantee fast response time while a small number of timeout losses are tolerable.
But as OCIStmtExecutes' first OCI_STILL_EXECUTING return takes hundreds of
ms it has become more like a blocking call and currently I cannot find any way to do what I want.
So now everytime such thing happens, the thread waits
quite long, after the first OCI_STILL_EXECUTING return
the time difference exceeds timeout limit, and the thread
calls OCIBreak() and OCIReset() and returns.
Maybe you are looking for
-
I can go into Firefox without any trouble but when I enter my Textpattern Web to work on and change, the log in appears, I open it but as soon as I start to work it goes back to log in and the following message comes out "Para mostrar esta página, Fi
-
Security code for nokia arte 8800
whats the standard nokia arte 8800 security code im on orange but the phone was orginally on o2 ive tried 12345, 1234, 0000, 00000, ?
-
I found an iPod a few weeks ago near my house and plugged it into my iTunes, I got the owner's information and sent her a message on Facebook letting her know that I found it. She hasn't responded. This was sent on May 18th. How long do I have to wai
-
Hello all! I'd like to know whether, and how you get the width of single symbols. For example: I would like to have a JTextField with a specific length (in pixels), that it's text exactly fits in it. To do this i must know the amount of chars and, as
-
Losing changes to library - iTunes Match.
I have my library set up locally, and iTunes match on. Every time I make changes to my library (such as album/song ratings that affect smart playlists), I update IM but all my changes are lost every time and it reverts back to the library before the