FSCM 9.0: Operator Profile Indicates You have No Authority to Enter Vendor
Folks,
Hello. I am working on FSCM 9.0 and login User ID is VP1. I want to add new Vendors' information into the Vendor module. when I click Vendor > Add, the message comes up as follows:
" Your operator profile indicates that you have no authority to enter Vendors. Contact your system administrator."
My login user ID is VP1. I have checked PeopleTools > Security > User Profile for VP1 and add all of Roles into VP1.
But the above problem is still not solved.
Does any folks understand to solve the above problem ? Thanks.
Go to Setup Financials/Supply Chain->Common Definitions->User Preferences->Define User Preferences
Select the VP1 userid, then under Product Preference select Procurement. There should be a hyperlink for Vendor Processing Authority.
You can also check the underlying table, PS_OPR_DEF_TBL_VND, the column is AUTH_VNDR_UNCERTFY, or run the User Preferences Report and select Report on All Products and Report on All Users, then scan the output for Vendor Maintenance to see which users already have authority to enter.
Regards,
Bob
Similar Messages
-
I'm getting a "some of the items in the itunes library not were not copied to the itunes phone because you have not authorized them for this computer" error message for some of my songs when I'm syncing to my iphone to my laptop. I've authorized the computer, but I still get this error messge. Any suggestions?
Were these items purchased with a different Apple ID than the one you normally use? If so, authorized the computer for that Apple ID.
-
UserExit Variable leads to warning: "You have no authority...
Hello Experts,
I have a question concerning a UserExit Variable.
I created a UserExit Variable on the InfoObject 0CO_AREA. In addition, I created a DSO in which I have two fields. The Username and the 0CO_AREA. The DSO contains the authorizations.
I also checked in RSSM and no authorization objects are activated.
When a User executes the Query the Variable takes his or her Username and checks in the DSO for which 0CO_AREAs the User is authorized.
The variable itself works fine but when I execute the Query in the BEx or the Web I don't receive any error or warning because I have a "ALMOST ALL" authorization. Nevertheless we created a role for the users and in the BEx everything is fine as well but for those user a warning appears when they execute the query on the web saying:
"You have no authority for a characteristic value of characteristic 0CO_AREA".
Nevertheless the results are correct. All I want is to get rid of the warning.
Thanks in advance.
StefanHello Snatic,
thank you for your help but we have not been using this authorization concept yet.
Therefore we traced the query when executed on the web. Unfortunately the trace doesn't show any strange messages.
Also quite interesting: When I copy the User (exact the same authorizations) and execute the Query on the Web it only leads to the warning but the original user receives an Error.
The Web Error message says: java.lang.UnsupportedOperationException
When I look further down the page it says.
WARNING: You have no authority ...
Very very strange
BR
Stefan -
You are not authorized to enter the application
Hi Gurus,
I am working on crm 5.0 and configuring B2B Scenario,
while trying to login E-selling user mangement URL,
I am getting below error.
"You are not authorized to enter the application'
I have given all the authorization roles.
Regards
ChandramohanHi Sateesh,
Thanks for ur quick reply....
I am getting error while entering into the User Management Link.
I have maintained the below Authorizations needed to enter into this application.
SAP_CRM_ECO_ISA_WU_B2C
Internet User for B2C
SAP_CRM_ECO ISAWU_B2B_FULL
Internet User for B2B
SAP_CRM_ISA_WEBSHOP_MANAGER
Super User for Customer
SAP_CRM_ISA_WEBSHOP_MANAGER
Web Shop Manager to create Internet User
Created one employee and maintained him as system user.
Employee Number has been maintained as Alias in the SU01 for the user(weblogin)
Did Iam missing anything.
Regards
Chandramohan -
Hi I am trying to update my email address since I quit work and left my work email address behind. I now only have one email address, but an iphone and ipod classic and want both of them to use the same email address - but am having problems using the address for my iphone as it is already attached to the ipod classic. Does anyone know how I fix this??
thanks
JennyMy profile: bookmarks - I added one of someone that did manage, it does take planning.
take a look and good luck, it is not supported or standard but can be done.
NTFS and HFS drivers to write back and forth may be easier and better though.
or 2nd hard drive - and use NTFS along with HFS driver as needed. -
Optical Drive indicate "You have inserted a blank DVD"
When loading software on my MAC the program froze during the analysis phase. I closed/ended the program and then re-loaded the disc and now it keep saying.. "You've added a blank disc, how would you like to proceed"...
I've checked the disc and everything is there... The disc loads on another computer but won't load onto the computer where I quit the program..
Suggestion on how to get around it / fix it?Hi Anthony,
You may end up having to purchase a new drive, but a few things you can at least try:
Clean the drive
Hold the MBP upside down (no, I'm not joking)
Repair permissions
PRAM Reset
SMC Reset -
including rhis one, you have autorized one computer out of your available 4 , what is that mean?
It means you had four of your five total authorizations available, and you have now used one more. You now have three left. You have two authorized computers.
-
Error 1032 - Ensure you have write permissions to the following registry entries:
I can not copy and paste the page into this forum box so ill have to put the link to the page
at the bottom of this page has the problem aparently for the reason why i can not install adobe flash player 10.1
in the box it says
the installation encountered errors
the active x control for flash player could not be registered
then it says
error 1032- ensure you have the write permisson to the following registry entiries.
please can some read this as ive sadi i can not copy and paste all of these entry permission i do not have aclue what they are on about.
here is the link.
http://kb2.adobe.com/cps/191/tn_19166.html#main_Error codes for Flash Player 10.1
thank you
for any helpHi, I saw that email notification come in and just had to comment. I re-read your thread and was laughing at it all. I can't believe you still have that great sense of humor after all of the trouble.
Did you hibernate over the Winter and just waking up? LOL
Perhaps Pat will have a way you can check to make sure you have full authority for that Administrator Account.
I know there is the Clock test. Right click over the clock hour/minute and then click on Adjust Date/Time. If you can see the clock and calendar Microsoft says that you have Permission needed to Install Programs. If you don't see that, then there is a problem.
Thanks,
eidnolb -
How do I authorize computer? I only have 3 authorized but itunes says I have 5
Help
About De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
Also, see iTunes Store- About authorization and deauthorization. -
You have insufficient privileges for the current operation-Getting error running OAF page in R12
I have a custom OAF page in R11 which is working fine.
Same page is giving below errors in R12.
Any suggestions how to resolve this issue..please advice.
[167]:STATEMENT:[fnd.framework.webui.OAPageSecurity]:MAC validation status = false
[167]:STATEMENT:[fnd.framework.webui.OAPageSecurity]:Request parameters validation status = false
[167]:ERROR:[fnd.framework.webui.OAPageSecurity]:You cannot run a page which is not SelfSecured when the MAC fails.
[169]:ERROR:[fnd.common.Message.auto_log]:FNDFND_INSUFF_PRIVILEGES
[169]:ERROR:[fnd.framework.OAException]:You have insufficient privileges for the current operation. Please contact your System Administrator.
[170]:EVENT:[fnd.framework.webui.OAPageContextImpl]:OAF LOG: Event : Redirect Page, in: oracle.apps.fnd.framework.webui.OAPageContextImpl: OA.jsp?akRegionCode=FNDDIALOGPAGE&akRegionApplicationId=0&transactionid=817211813&oapc=10&oas=YyMjRI6buFwrYehD8b25iQ..&retainAM=Y&addBreadCrumb=S&OAMC=G
[170]:PROCEDURE:[fnd.profiles.Profiles]:getProfileOptionValue: name=JTF_PF_MASTER_ENABLED; levelID=10001; levelValue=0; levelValueApplID=0
[170]:EVENT:[jtf.activity.CorePageObject]: PATBE START currentPageObject : PAT STATUS:false
[170]:EVENT:[jtf.activity.CorePageObject]: PATBE END currentPageObject : return factory.dummyProxyUser():
[322]:EXCEPTION:[fnd.framework.webui.OAPageBean]:java.lang.NullPointerException
Thanks in Advance
Sridevi KHi Sridevi,
The custom page is a selfsecured page?
ie, it will be accessed without login?
What is the profile option fnd_debuging_level 's value set to.
I Could see one your other thread
Re: You have insufficient privileges for the current Operation error
you mentioned that you did tried setting the profile options
Framework Validation Level
FND Function Validation LEvel
FND Validation Level
to none, still you are facing the issue,
At what level you tried the profile options.
Thanks,
With regards,
Kali.
OSSi. -
updating to 3.6.6, get message "cannot complete operation because you do not have sufficient privilege for some items". Running the new second version, works fine, but slow, the old version not updating
See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta -
Operating unit access is not allowed.check that you have access to OU
Hello,
I am working on supplier conversion. 11i to R12 (Linux). Old DB is 9i and new is 11g. I am getting the below error when i am trying to upload supplier site
msg count2
Status E
Vendor site id
Party site id
Location id
return_status: E
l_msg_data:Operating unit access is not allowed. Please check that you have access to the operating unit: XXLABS Operating Unit, 100
l_msg_data:Operating Unit Info is null
we created a new org 100 and i am trying to create supplier sites in that ORG. We created a site to the supplier from front end but when i try from the back end i get this error. Below is the code
DECLARE
l_vendor_site_rec ap_vendor_pub_pkg.r_vendor_site_rec_type;
l_return_status VARCHAR2(10);
l_msg_count NUMBER;
l_msg_data VARCHAR2(1000);
l_vendor_site_id NUMBER;
l_party_site_id NUMBER;
l_location_id NUMBER;
l_msg_index_out NUMBER;
BEGIN
mo_global.set_policy_context('S',100);
SELECT vendor_id
INTO l_vendor_site_rec.vendor_id
FROM pos_po_vendors_v
WHERE vendor_ID = 3101;
l_vendor_site_rec.vendor_site_code := 'WOBURN_test';
l_vendor_site_rec.address_line1 := 'XX WEST PARK';
l_vendor_site_rec.city := 'WOBURN';
l_vendor_site_rec.state := 'MA';
l_vendor_site_rec.country := 'US';
l_vendor_site_rec.zip := '01801';
l_vendor_site_rec.org_id := 100;
pos_vendor_pub_pkg.create_vendor_site(
p_vendor_site_rec => l_vendor_site_rec,
x_return_status => l_return_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
x_vendor_site_id => l_vendor_site_id,
x_party_site_id => l_party_site_id,
x_location_id => l_location_id);
COMMIT;
DBMS_OUTPUT.PUT_LINE ('msg count'||l_msg_count);
DBMS_OUTPUT.PUT_LINE ('Status '||l_return_status);
DBMS_OUTPUT.PUT_LINE ('Vendor site id '||l_vendor_site_id);
DBMS_OUTPUT.PUT_LINE ('Party site id '||l_party_site_id);
DBMS_OUTPUT.PUT_LINE ('Location id '||l_location_id);
dbms_output.put_line('return_status: '||l_return_status);
IF (l_return_status <> 'S') THEN
IF (l_msg_count > 0) THEN
FOR i IN 1..l_msg_count
LOOP
fnd_msg_pub.get
(p_msg_index => i,
p_data => l_msg_data,
p_encoded => 'F',
p_msg_index_out => l_msg_index_out
fnd_message.set_encoded(l_msg_data);
dbms_output.put_line('l_msg_data:'|| l_msg_data);
END LOOP;
end if;
END IF;
END;
Any ideas????I found a similar problem and the instructions said to check a permission box in the "Get Info" tab.
This applies only when the Library is on an external drive. You cannot ignore permissions on the system drive.
I was deleting files trying to make space on my hard drive
What were you deleting?
and noticed as I was deleting files more data was being added to the iPhoto Library.
Hard to see how deleting files can add data to the iPhoto Library. Can you explain why you thought this?
I would really like to keep these pictures.
Make a back up now.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store -
HT2693 Do you HAVE to backup the computer before downloading a newer operating system?
I need to update my operating system. Is backup always required. How can I speed up the backup?
Paintinacorner wrote:
I need to update my operating system. Is backup always required. How can I speed up the backup?
Do you not backup regularly anyway? If not, the backup may be very slow as you have a lot of stuff to backup.
Making any changes to any operating system or firmware on any computing device without a backup in hand is simply asking for disaster to smack you on the forehead. -
Windows 2008 R2 - You have been logged on with Temp Profile
Hi Guys,
One of our Server which was running Win2008 R2 crashed due to power & ups failure.
I reinstalled the OS and restored System State backup since then whenever i login to the server i get this message, please check the screenshot and suggest.
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation CertifiedHave you checked logging on to the server with another domain account ? do you have same problem ?
Also verify server time is in sync with the DC.
Try recreating the affected user profile on the server in question and see if that makes any difference.
Log on to the server with an administrator account.
Rename the affected user profile say, User to User.old or whatever you like
Reboot the server
Log on with the affected user account which will create a new user profile on the server.
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Maybe you are looking for
-
How can I log into my old game center on my iPhone when the email address used is the same for the other?
-
I have just upgraded to Firefox 4.0 and ever since then I get this message when I try to go to either Yahoo or Gmail "THERE WAS A PROBLEM SENDING THE COMMAND TO THE PROGRAM", I had this problem a month or so ago so downgraded to Firefox 3.6 and the p
-
Modify Standard CCMS Alert E-Mail Text
Hi ALL, I have configured CCMS Monitoring and its working Perfect. Alerrt E-Mails are generated, but the Text of these E-Mail is Techno savvy and cryptic. Is there any way I can Modify/Customize the CCMS Alert E-Mail Text. Thanks
-
Replaced MSVM with Java in XP SP-2.2, now Java console start crashes OS/PC
Hi all, can anyone here help me out? I upgraded from Microsoft Virtual Machine to the Sun Java VM. I did everything the directions said to do meticulously, but when I went to start the console and then check to see if it was installed properly I coul
-
ADDM recommendation regarding SQL Tuning
Hi all. Several times, I've seen this recommendation when I run ADDM: Recommendation 1: SQL Tuning Estimated benefit is 1.78 active sessions, 4.93% of total activity. Action Tune the PL/SQL block with SQL_ID "9f9y14fzgg9a9". Refer to the "Tuning PL/S