[FSCM] partner assignment in transaction TS01

Hi, everyone
There is a tab 'Partner Assignment' to add another business partner related to a securities transaction in transaction TS01. But I cannot choose any business partner. I created brokers, issuers, depository bank, and counterparties in BP. And I assigned additional business partner role categories to TRG001 (financial transaction) work area and 200 (securities) application category. Here is the menu path in SPRO.
FSCM -> Treasury and Risk Management -> Basic Functions -> SAP Business Partner for Financial Services -> Settings for Financial Services -> Communication -> Settings for Partner-Object Relationship -> Assign Additional Business Partner Role Categories to Object
TR0150: Issuer
TR0152: Depository Bank
TR0801: Broker
But I cannot add any business partner to the partner list of 'Partner Assignment'.
Thanks.

Hi Minsun,
Can you help me on the issue you faced earlier for assignment of partner in TS01. I am also facing the same problem.
Please guide me for solving the issue since you already went through this.
Regards
Prasad AV

Similar Messages

Program To Identify the BP that are not assigned to transactions.

Hai guys,
I want to identify ALl the BPs that are not assigned to any of the Transactions like Oppurtunities,Activities etc in our system,
I can run report bu using the tables But000 and CRM_ORDERADM_H.
Is there any easy way i.e a standard program in the system that does the work.

Follow these steps to get the list of BP's assigned to transactions
1. Copy the order GUID's from CRMD_ORDERADM_H
2. go to table CRMD_LINK paste the copied order guid in place of GUID_HI and copy the GUID_SET.
3.go to CRMD_PARTNER and paste the above copied CRMD_LINK GUID_SET in place of CRMD_PARTNER GUID and copy the PARTNER_NO
4.Go to BUT000 paste the above copied CRMD_PARTNER PARTNER_NO in place of GUID and get the partner number.
Hope this helps out.
Thanks,
Thirumala.

There is no valid business partner assigned to your user

Hello,
I have trouble managing change requests and would greatly appreciate some help.
I am able to create an urgent correction to later authorize it and set the automatically created request to "In Development" status, but after this I get the following message and can not continue to the Created status.
Type: Stop sign
Reference object: Header Data
Message text: There is no valid business partner assigned to your user
I would also like to know where (transaction) and how to eliminate change requests.
My user was assigned to me with the following roles:
SAP_CM_REQUESTER
SAP_CM_CHANGE_MANAGER
SAP_CM_DEVELOPER_COMP
SAP_CM_TESTER_COMP
SAP_CM_OPERATOR_COMP
SAP_CM_ADMINISTRATOR_COMP
Do I need any additional roles? Must I assign a BP to my user? If so, where (transaction) and how (will I need aditional priveleges)?
Regards,
Henry

Thank you Arun,
Yes, I am referring to SOLMAN. Where must I do this, what transaction? I tried BP transaction but it only permits me to establish relations between BP's and not with users. I am sorry, but I am fairly new to SOLMAN and need a little more direction. Maybe if you have a good SOLMAN guide for beginners, I would deeply appreciate you sharing it with me.
email:[email protected]
Thank you again Arun.
regards,
Henry

How to block a partner customer from transaction posting

Dear Experts,
Please suggest/advice how to block a partner customer from transaction posting,As we have two customer categories defined 1.Parent customer 2.Child customer.One parent customer has several child customers and they are assigned in partner function part of the child master record.We have defined the parent customers for reporting purpose only,not for any transactions to be done.
So please suggest how can we block those parent codes from being transacted directly.We wan them only for reporting purpose.
Can we do the restriction on account group level or we have to make a validation for this.
Please advice.
Regards
Partha

Dear Partha,
You need to Block customer against posting -> Transaction FD05 (you can choose foe selected company or for all)
You can block also directly the invoice/payment in the document
Or define some tolerance limits and system block automatically
Let me know if it is not clear
Thanks
Tarek

Service Desk - need IB52 iBase "partner assignment" mass change

Dear Ladies and Gentlemen,
We are using SAP Service Desk in Solution Manager 7.0 EhP-1.
There are many satellite systems connected to SolMan using Service Desk.
Of course all of them are setup in SMSY, have a valid iBase entry in IB52, and have the "sold-to-party" assigned in IB52 -> Goto -> Partner.
Now we need to assign a new business partner as "sold-to-party" for all these systems.
We do not want to rename the current business partner, but have to assign a new business partner to not influence existing tickets.
Thus, manually we would need to go to IB52 and change the partner assignment in IB52 -> Goto -> Partner and enter a new value for all the systems.
Q: is there a way to perform a mass change for the "sold-to-party" partner assignment of the iBase entries? Is it possible to update or replace all or multiple existing partner assignments in iBase?
Many thanks,
Peter

Hi Christian,
Can you please tell me how did you create iBase for NON-SAP Systems? I know it is IB51/IB52? I am not sure what do you do after that? For an example I went to IB51 and create iBase number 403? now I go to IB52 and put the 403 in the installed Base field and click on Green arrrow to go inside correct? what do I do after that? where is the options to create the iBase name call "Network Group" ?
How did you solve your issue for not showing when you went to F4 in NOTIF_CREATE? was that authorization error? if yes, do you know the object name?
any help is much much appreciated
Thanks in Advance
Kumar

'Business Partner Assigned to the User' Access Sequence don't work

Hello.
I use access sequence 0008 (Business Partner Assigned to the User) in my Partner determination procedure. But it doesn't work. Corresponding Partner field in service document is empty. But I need that BP linked with logon user filled it.
I've made the same settings on another incstanse of SM and it's work. And what the difference between I don't understand.
Edited by: Dmitry Udot on Feb 13, 2011 2:31 AM

Sorry, but I don't quite get it. My purpose is to have 9 policies all working all the time (they did at in one version of firmware). I don't care about time entries for these. All 9 policies are full of keywords and websites to block webpages related to porn to one degree or another. The 10th policy is time-based to prevent internet access altogether for one or two computers through the wee hours of the morning. This, all in leu of having no parental controls.
Again, it would help if there was more detailed documentation on how this all works. This is the first I am aware that time settings in one policy could affect or impede the operation of other policies. How am I supposed to know this?
In any case, I appreciate your assistance and looking into this for me. But can you now tell me how to make it work so the policies will work as I want - the first 9 around the clock all the time, and the 10th one only from 1:30 am to 8:00 am (every day). Please instruct me on how I am supposed to configure this to work, and what specific settings I am supposed to enter... if it is even possible. Or is there another way of accomplishing this on my WRT54G (Rev. 2) product? Thanks.
Perry

Sending mail to all partner function in transaction

Hi Folks,
Standard action and condition sends mail to only main partner function in transaction. But transaction could have more than one partners for same partner function. Can mail be sent to all partners in transaction by using standard action configuration?
Regards,
Nikhil

Hi Nikhil,
You can control this using CRM_ACTION_BADI.
Below the use of this BADI.
In partner-dependent actions, business partners that occur in several functions, only the main partner remains.
This can be useful, for example to avoid sending the same e-mail to the same business partner if there are several action definitions for different partner functions or function types.
However, if several different actions have been defined as partner- dependent, this effect may not be required.
In this case, the CRM_ACTION_BADI standard implementation can be deactivated. In this case, all partners from the transaction are considered during action determination.
If this is also not required, a new implementation can be created.
Hope this helps.
Cheers, Satish

Assign Z transaction on SRM portal under check status

Hi ,
I need to create the custom transaction(ZSC04) which is copy of BBPSC04 .
And also assign it under check status with New text .
How I can assign this ZSC04 under check status and will be called from
SRM portal ?
Thanks,
SS

Hi,
I have assigned Z transaction in PFCG ,it's visible on SRM portal but unable to call the required trnsaction .
Is it require to create ITS service and assign parameters for calling the z transaction on SRM portal ?
Thanks In advance .
Regards,
SS

Assignment of Transaction variant to some users only

Hi,
I have created one transaction variant for T.code:MM02. With this some fields were made display mode. I want assign this Transaction variant to few of the users only not all users. That is for others the above are changeble.
So I want to know how to assign this transaction variant to respective users only. If I activate this as standard variant, it is applicable to all. But I want to assign to few only.
Reagrds.
Veerappa
Edited by: Chinna Veerappa on Oct 17, 2008 7:03 AM

Hi,
I tried this before posting the above. When I assigned some users, it is reflecting all users (Irrespective of users assignment, if I activated).
Regards,
Veerappa

How to see system status in spro. How to assign business transaction to user status.

Hi All,
How to see system status in spro. can we change system status in spro for maintenance order.kindly share.
Also share how can we assign business transaction to user status for maintenance order

Peter,
You cannot see the system-status in SPRO.
You can view the system-statuses via BS23.
Be warned - it is NOT advisable to change the system-status setting as you may screw-up your system. Remember that many statuses are used across multiple objects and multiple modules.
PeteA

Use of partner assignement fields

Hi,
I would like to know the 'real' use of partner assignment fields. For instance, we could focus on the 'partner segment' field (the field segment is used as recommended in the standard: the segment is both the SAP field and the IFRS notion of business segment):
Use 1) the partner fields are storing the information of the trading parner : the 'partner segment' is the 'segment' of the 'trading partner'. This is useful when doing preconsolidation routines such as intercompany reconciliation : we reconcile data from company A Segment X with trading partner B partner segment Y
Use 2) the partner fields are storing the historical value of the allocated fields: e.g. when segment 99_TBD is allocated to segment 01, the partner segment field is used to store on line item the relationship between segment 99_TBD and segment 01.
This is useful to track the origin of the data flow for allocations (and for clearing account in document splitting)
Thank you for helping me!
Bernard
Edited by: Bernard Frédéric on Oct 2, 2009 3:28 PM

Business example
Those 2 uses of partner fields are not conciliable : here is a example that shows this inconsistency :
I have a relationship between two companies. On one company, the segment has to be allocated. I have to reconcile data by company code and segment.
Here is the posting in the company where its segment has to be allocated (from 99_TBD to 01):
Company A / Segment 99_TBD / Trading partner B / Partner segment 06 100
I would like to allocate segment 99_TBD to segment 01, so I would expect the following intercompany posting:
Company A / Segment 99_TBD / Trading partner B / Partner segment 06 (100)
Company A / Segment 01         / Trading partner B / Partner segment 06    100
=> Thus, the intercompany positions are:
Company A / Segment 01         / Trading partner B / Partner segment 06    100
This is the result I expected
But when running the allocation cycle, the following is the posted:
Company A / Segment 99_TBD / Trading partner B / Partner segment 01            (100)
Company A / Segment 01         / Trading partner B / Partner segment 99_TBD     100
=> Thus, the intercompany positions are:
Company A / Segment 99_TBD / Trading partner B / Partner segment 06             100
Company A / Segment 99_TBD / Trading partner B / Partner segment 01            (100)
Company A / Segment 01         / Trading partner B / Partner segment 99_TBD     100
This not what is expected: the allocation of company A should have no impact on the segment of company B
Can you help me understand this? How the field partner segment should be used?
Thanks

Short cut assign all transactions code to a user, restrict only few tr code

Hi,
I know how to assign transaction code to user, and restrict transaction codes to the user through pfcg assigning role.
If I want to assign all transaction codes to a user except say su01, and pfcg, then I have to write all the transaction codes to a profile assigned to the user except pfcg and su01, which is a tedious job. Thus is there any way like in sap_all if I can exclude only those transaction codes which I want to exclude to a user.
No one would like to write down 1000 tr code assigned to a user. Is there a short and better way?
Thanks
syed

Create a new role using PFCG go to the authorization tab and use the sap_all template and remove the authorizations for the transaction you don't want to assign.
Thats it
Regards
Juan

Assignment of Transaction Code to Quick Viewer Program

Hello,
We have created the Quick Viewer under Production Server. We would like to assign the transaction code to the quick viewer program. Will it possible to copy the program from production server to development server, creation of transaction code & assignment of transaction code to program.
Please explore the possibilities
Regards
Anilkumar

Dear Mr. Srinivas,
Thank you for your reply. I tried the same thing - my doubt is in catt we have various screens I want only the screen where user will assign the file and execute the data upload in the new transaction.I gave the program name and the respective screen number but - system is endlessly running without any output.
Can you guide me on what should I do in case of multiple screens containing program.
Regards,
M.M

Electronic Bank Statement - Assign External Transaction Types to Posting Rules

Hello,
I am trying to assign external transactions (BAI codes) to posting rules in global settings of electronic bank statement.
Here is my scenario -
If it is a credit transaction then I assign BAI code 167 to a posting rule (ex. Z555) that is assigned to GL account lets say 1234. Now I want to assign a credit transaction 167 from a different customer to a different posting rule (ex. Z666) so it posts to different account lets say 9991. SAP won't let me do this. It gives me an error that entry already exists. It won't let me assign two posting rules to the same external transaction code. Is there a way to address this scenario?
Please advise.
Thanks,
Priya

Hi Priya
If you have something different to distinguish between the two transactions, you can use the search string configuration. Generally, such kind of information is available in Notes to Payee information in your bank file. The below link will help you in how the search strings are configured in SAP
EBS: configuration of search string, part 1
If the search string does not work for you, you may also at implementing the enhancement FEB00001. You can check out the relevant exits in this enhancement in t code SMOD.
Thanks & Regards
Sanil Bhandari

Activation is not possible due to warnings (Partner Assignment)

Hi,
While activating a contract getting an error "Activation is not possible due to warnings (Partner Assignment)"
Thanks and Regards
Srihari

Hi all
Just had an upgrade and I am experiencing the same problem: Message no. RECN027
Activation is not possible due to warnings (Partner Assignment) when trying to activate the Contract in RECN.
Where in the Business Partner do I change the validation of the partner please
Thanks in advance
Gavin

[FSCM] partner assignment in transaction TS01

Similar Messages

Maybe you are looking for