FSCM91/PT8.52 installation

Hi there,
I installed the HRMS9.1/PT8.51 and then updated it to the 8.52 before.This time i want to install the FSCM91 and PT8.52 directly. I downloaded the packages from the e delivery. After the step running datamover scripts , then i want to run the version AE(see below). It prompted an error - The database is at release 8.51 . The PeopleTools being run the require database at release 8.52.
I checked the PS_MAINTENANCE_LOG record and no updated related to the PT 8.52 is installed in the database. But the version of my installed PeopleTools is 8.52. It makes me confused.....
psae -CD FSCM91 -CT ORACLE -CO <oprid> -CP <password> -R INSTALL -AI VERSION
Does anyone has the same experience ?
Thanks in advance.
Dennis

I'm not sure which Feature Pack you've installed, but apparently you must have to manage a database upgrade to the Peopletools 8.52 to match your Peopletools client. In fact, depending of the application part downloaded, you may or may not have to manage this upgrade.
If you downloaded "PeopleSoft Enterprise Financials and Supply Chain Management 9.1: Feature Pack - March 2011", it is based on PT8.51, to work within PT8.52, you must upgrade the database.
If you downloaded "PeopleSoft Financials and Supply Chain Management 9.1: Feature Pack 2", it is based on PT8.52, and you are then facing to a problem. In that case I would probably restart from scratch.
Take care which one you've really installed, and once again as for every single install, read carefully the readme including the one on edelivery where you downloaded the software.
Nicolas.
added extra info.
Edited by: N Gasparotto on Jul 18, 2012 11:02 AM

Similar Messages

Install PT8.53 with Linux Issue: Jolt client (ip address 192.168.196.102) does not have proper application password

Folks,
Hello.
I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
Step 1: start Oracle Database Server and LISTENR is listening.
Step 2: start Application Server ./psadmin and 8 processes are started.
Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
The application server is down at this time.
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
Mac OS X 10.6(Snow Leopard)
Mac OS X 10.5(Leopard)
iPad
Oracle Linux Enterprise
Mac OS X 10.4(Tiger)
Windows 8
Windows 7
Mac OS X 10.7(Lion)
Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
I View APPSRV_1023.LOG (current server log file) and its content is below:
PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
~
I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
My question is:
How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
Thanks.

Dear Nicolas,
Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database !

Search is not working in HCM9.1 , pt8.52 after install

Hi I just installed HCM9.1 with Peopletools 8.52 on windows xp 32bits with Oracle 11g. This is my first install ever.
When I login online the search does not work (when i click search on any page that has a search record it just shows that progress gif image but nothing happens.)
I logged in using PS/PS
any ideas of what I did wrong during the installation?
These are the steps I followed.
1-Installed Oracle11g
2-Installed web logic
3-Installed Tuxedo and defined TUX_DIR
4-Installed Peopletools in C:\pt8.52 and HCM9.1 in c:\hcm9.1 nad Verity
5-Manualy created a database called HRSD using initHRSD.ora and configured the listner and defined ORACLE_SID , ORACLE_HOME and created the spfile.
then ran the scripts in the documentation to create namespaces , roles , dbowner etc
6-configured the application designer
7-loged into datamover and installed a demo hcm9.1
8-ran grant.sql
9-ran pt851u.sql and pt852u.sql.
10-configured the application server and booted it.
Created a new domain and configured it and started it. 8 processes start
11-configured the web server and started the PIA.
12-loged in successfully but the search does not work
Edited by: user2003312 on Feb 17, 2012 7:42 AM

Hi,
First of all I am very surprised you were able to get so far with the installation, since PeopleTools 8.52 is not certified on 32 bits systems and definitely not on Windows XP.
However,
Your are trying to install HCM 9.1 which is delivered with PeopelTools 8.50 and you are installing PeopleTools 8.52 so, you should have run the scripts as defined in chapter Updating PeopleTools System Tables in the installation manual to update your HCM 9.1 to PeopelTools 8.51.
Did you run these scripts?
If not please complete these steps as described in the installation manual.
And I also do not see you mention you have installed any PeopleTools patch. We are currently at 8.52.05. It is common at installations to patch PeopelTools to the last patch level.
Hakan

UPGPTHASH App Engine Post Installation is taking a lot of time

C:\pt852\bin\client\winx86>psae -CT ORACLE -CD PSFNP -CO VP1 -CP VP1 -R INSTALL -AI UPGPTHASH
PeopleTools 8.52.11 - Application Engine
Copyright (c) 1988-2012 Oracle and/or its affiliates.
All Rights Reserved
This is running for a long long time...Does it run that long?Almost an hr now .I am doing a fresh install of FSCM 9.1 FP2 on Tools 8.52.11 on Windows

mmaller0319 wrote:
"If you are installing either a PeopleSoft PeopleTools System Database or a database delivered on
PeopleSoft PeopleTools 8.52, and you are applying a required for install PeopleSoft PeopleTools patch, skip the
steps in this task"
In my case tools was 8.52 and so i did not have to run any relscripts?
Does this mean we skip entirely from 7-1-1 to 7-1-12?
What about the PPLTLS84CUR and PPLTLSCURDEL project?Dont we have to copy both of them and alter PPLTLS84CUR?
I have already copied PPLTLS84CUR followed by CURDEL and then altered PPLTLS84CUR?Will it have done any harm to the installation?All this is not required. If your db is running on PT8.52, skip the task 7-1 and go directly to 7-2. Do not copy and build projects.
If I was you, I would restart from scratch with a new db.
Nicolas.

PeopleSoft Installation Help

I am planning to install ,
HRMS 9.0 ,Financials 9.0 , PeopleTools 8.49 on my laptop.
What should be my system config.
quick ques
Can I use the external hard disk drive for the installation? ( someone told me I need 80 gigs for HRMS, and 120 gigs of space for Financial on my internal drive.) please suggest how true is this.
Would appreciate the information. Thanks in advance.
Sam

user10551889,
For self-training purpose I seriously would tend to avoid OracleVM. OracleVM is a bare-metal virtualization software. That means is it not installed on top of an OS, but it is between OS and hardware. OracleVM is managing the hardware sharing between all the OS installed on top of it (all the installed OS are virtual machine). Moreover OracleVM required more than one computer, one is server dedicated, one is the client. I don;t think this is what you want to do.
What I showed on my blog is working with VMWare software. This software is installable on top of your OS (named Host), and you'll be able to run mutliple other OS into this software (they are Guest OS), exactly like if they were hardware independant of your host OS.
On the other hand, if you are interesting only by Peoplesoft code or functional point of view, and not by the administration side, then you could try to install Peoplesoft directly on your XP mahcine. It is not supported, but as I showed on my blog it is working and much more easy :
http://gasparotto.blogspot.com/2008/06/peoplesoft-server-on-windows-xp.html
That say, it is not supported conf, but I don't see any issue to use it for self-training.
Of course, if you are more interested by the admin side, then go for VMWare and OEL installation. Take much more time, but it is also much more interesting.
Marc,
You were not wrong with the size estimations you give in your first post. But the size is highly database vendor dependant and Peopletools version and patch level you are working on. That also depend if you are installing multilimgual application or not, and unicode or not.
Prashant gave you some clue, but I think it is some high values, or max you won't reach. For the PS_HOME, I would count less than 15Gb for a ML and unicode install, it could be more around 10Gb if you don't use them.
For the database size estimation, DEMO ones, you could have a look to the following Supplemental installation guide, depending of your application :
http://download.oracle.com/docs/cd/E05445_01/psft/acrobat/hrcs90_install.pdf (page 2 - HRMS 9.0 Demo Database Sizing Information by Platform)
It is given 65Gb for a HRMS9.0 on Oracle. Again, this is depending of your Peopletools patch level, if I well remember, PT8.49.08 modified a lot the database creation script, and improved/reduced the space required. It could be less than 20Gb. But on the 8.49.00, maybe 80Gb is a reasonable size to take in account.
A FSCM database is much more bigger, and something like 100Gb is not ridiculous on Oracle db.
Of course, after your installation, you could reduce the size of the datafiles to save space.
This size subject has been discussed many times over here, you could read the following thread :
Re: Install PeopleSoft (PeopleTools 8.49, FIN) on 40GB laptop?!
And if you are vey limited by the disk space, it seems MSSQL is using very less space than Oracle db. Of course, it is a solution only if you are not Oracle db fan. But could be a solution for self-training on your own pc, or to learn about other db.
Lastly, if you are very concern by the required space, then buy a external hard disk, a 500Gb USB or eSATA drive cost is not very expensive nowadays, performance won't be miraculous, but at least could be a workaround to your space issue and give a workable solution.
Nicolas.

[Help] Search Instance Properties Setup in PT8.52 for SES integration

Hello,
I've got an issue for the Search Instance Properties to integrated with SES in PeopleTools 8.52. Here's the Scenario of my testing environment:
I've installed 2 VM on VMWare soft as following:
*1.* a.mydomain.com - using NAT as the VMWare NIC protocal, Microsoft Windows 2008 R2 with DNS & Active Domain Controller installed, PT8.52.06 with FSCM 9.1 FP2 installed (all Database server, App Server, Batch Server, Web Server, File Server in one box) - PIA working fine
*2.* b.mydomain.com - using NAT as the VMWare NIC protocal, Microsoft Windows 2008 R2 as memeber of the mydomain.com, the SES installed and the SES is working fine.
Below is what the check list I've gone so far to following the Search Framework setup:
Then I followed the instructions from PT8.52 installation guide for Oracle, Chapter 11. For the check list prior to the implementing the Search Framework,
SES installed & running - passed - I can open the http://b.mydomain.com:17777/ page (changed the default port from 7777 to 17777)
PeopleSoft configuration - Database, App Server, Process Server - Running, PIA working fine, Background process posted, etc.
IB configuration - Load the gateway, update the domain status, Gateway App Server Node / Default Node updated - Ping Successfully
As following the installation guide, create new trust entity on SES site, update Timeout value
Also validate the App Server with at least 2 PSAPPSERV (Actually 2 or 3), Pub/Sub is enabled as well - PSRENSRV (with Auth Token enabled as well)
Creating a new User PSOFT to included both the 3 Search Framework Role of Developer, Admin and Server.
Validate the Local Default Node (Note: Renamed the default local node from PSFT_EP to MY_NODE), Gateway ID is LOCAL, and Connector ID is PSFTTARGET for the node.
And in the Gateway properties page, the secureFileKeyStorePath is default path, secureFileKeyStorePassword is encrypted via the tool below with the value of "mypwd".
Node Portal info such as Content URI and Portal URI updated. - Node can ping success
Service of ADMINSERVICE & ORACLESEARCHSERVICE exists
Then I create a new Search Instance under the Search Instance page from PIA, (Named PSSES)
Below is the value setup on the page:
Search Enginee Detail:
SSL: Disabled
Host: b.mydomain.com
Port: 17777
Admin Service Credentials:
User: eqsys
Password: <password> setup during the SES installation
Query Service Credentials:
Proxy: the new created trust entity name on SES global settings
Password: password for the new trust entity on SES global settings
Call Back properties:
URL: http://a.mydomain.com/PSIGW/PeopleSoftServiceListeningConnector/MY_NODE
User Name: PSOFT
Password: <password> for PSOFT
Then Save, after saved, the test Ping button appearred, and when I click the Ping button to test search enginee b.mydomain.com at *17777*, it show the following error:
Cannot establish HTTP connection (158, 2842)
Can be caused by any of the following:
*1. Cannot load certificates due to keystore password (not encrypted)*
*2. Keystore file not found.*
*3. Proxy server not configured.*
Then I checked the following, and looks to me all are correct.
I've checked the Gateway properties page, and the secureFileKeyStorePassword is encrypted as something {V1.}xxxxxx= value
I've also check the pskey file is under the a.mydomain.com server, also to ensure the access, add addition permission on the file with everyone read permission.
For Proxy, not sure if this is needed, and if so, how to setup? I don't think there's any proxy server needed under my test case.
My PIA Url: http://a.mydomain.com/XXX/signon.html
My SES Url: http://b.mydomain.com:17777/
Both the URL can be accessed from Firefox directly from a server and b server. But from the PeopleSoft Search Instance Properties page, the test Ping failed.
Please help to give any hints on this issue.
It would be appreciated if any reply on this topic.
Thanks,
Saxon SI

Hello Hakan,
Thanks for your reply, I follow the same as you posted in your blog, the only difference is that I didn't installed a MS Loopback adapter.
Yes, the keystore full path contain all the windows drive, folder and the key filename as well.
I may find out the issue, the pskey file does exist under the %PIA_HOME%/webserv/psft/piaconfig/keystore folder, but I found the last updated date is 3/16/2004, even I grant everyone permission on pskey file with write/modify rights, after I do some change in Gateway Properties from PIA page, the pskey file didn't get the last modified date updated, still the old 2004 date.
It should be the issue with related to this file not update. Do you have any idea how to get it update? Currently it seems the modification on PIA page for gateway property didn't auto update this file. Even I change the new of pskey to pskeyNew, but no pskeyNew files found under that folder after saved from PIA page.
Thanks,
Saxon SI

S/w binaries for PT8.52

Hi,
Can any one list all the s/w binaries that is required to prepare a new environment on windows 2008 R2 with oracle DB 11.2 for PT8.52 with HRMS and CS9.0 Revision 5.Also please do advise the differences in installation of PT8.51 and Pt8.52.Your help will be highly appreciated.Thank u.

Hi,
You can access to the Oracle E-Delivery site, to search for the details for any required version for PT8.52 - edelivery.oracle.com
Here's the list of PT8.52 list:
Required:
Download PeopleSoft PeopleTools 8.52 Supplemental Installation Information V27932-01 71M
Download PeopleSoft PeopleTools 8.52 Disc 1 of 3 V27724-01 1.2G
Download PeopleSoft PeopleTools 8.52 Disc 2 of 3 V27725-01 1.9G
Download PeopleSoft PeopleTools 8.52 Disc 3 of 3 V27726-01 18M
Download PeopleSoft PeopleTools 8.52 Client Only V27722-01 598M
Download Tuxedo 10gR3 for MS Windows Server 2008 w/MS VS 2008 x86 32-bit V20090-01 66M
Download Oracle WebLogic Server 11gR1 (10.3.4) Generic and Coherence V24338-01 1.1G
Download JRockit JDK R28.1 for Java SE 6 with JRockit Mission Control 4.0.1 for Microsoft Windows (64-bit x86) V23714-01 109M
Note: based on the installation guide, you can use an updated JRockit patch, which is obtained from support.oracle.com, version should be 1.6.0_22 or 1.6.0_24, etc. Alternatively, it is suggested to apply the latest PT patch, whichi should be PT 8.52.06 I guess, for the download link and Instruction of patch you have to get it from the support.oracle.com.
Optional:
Download PeopleSoft PeopleTools 8.52 PeopleBooks V27931-01 57M
Download PeopleSoft PeopleTools 8.52 Verity V27723-01 1.2G
Download Oracle Secure Enterprise Search 11.1.2.2.0 Windows X64 (Part 1 of 2) V27241-01 Part 1 of 2 1.2G
Download Oracle Secure Enterprise Search 11.1.2.2.0 Windows X64 (Part 2 of 2) V27241-01 Part 2 of 2 1.5G
Here's the list for HRMS & CS 9.0:
Required:
Download PeopleSoft Human Capital Management and Campus Solutions 9.0 Supplemental Installation Information - Revision 4 V30929-01 369K
Download PeopleSoft Human Capital Management and Campus Solutions 9.0 - Revision 5 V30469-01 1.1G
Optional: (For MP, Not sure Revision 5 including up to which MP)
Download PeopleSoft Enterprise Human Resources Management System 9.0 PeopleBooks - Revision 1 V19909-01 300M
Download PeopleSoft Enterprise Campus Solutions 9.0 PeopleBooks - Revision 2 V19910-01 286M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 1 B42973-01 26M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 2 (CD) B43660-01 136M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 3 B45758-01 149M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 4 B46739-01 145M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 5 V13671-01 225M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 6 V14743-01 220M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 7 V15812-01 64M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 8 V18483-01 83M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 9 V19535-01 36M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 10 V22323-01 70M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 11 V24288-01 44M
Download PeopleSoft Enterprise HRMS and Campus Solutions 9.0 - Maintenance Pack 12 V27569-01 78M
Download PeopleSoft HRMS and Campus Solutions 9.0 - Maintenance Pack 13 V29879-01 86M
Download PeopleSoft Campus Solutions 9.0: Additional Features - April 2012 V32297-01 28M
Download PeopleSoft Enterprise Human Resources Management System 9.0 Global Payroll for Argentina Supplemental Installation Information (Revision 1) V16877-01 608K
Download PeopleSoft Enterprise Human Resources Management System 9.0 Global Payroll for Argentina V16157-01 355M
Download PeopleSoft Enterprise Human Resources Management System 9.0 Global Payroll for China B45713-01 356M
Download PeopleSoft Enterprise HRMS 9.0 Global Payroll for Thailand Supplemental Installation Information B46050-01 667K
Download PeopleSoft Enterprise Human Resources Management System 9.0 Global Payroll for Thailand B46051-01 357M
Download PeopleSoft Enterprise HRMS & Campus Solutions 9.0 - Student Administration Integration Pack Supplemental Installation Information - Revision 1 V14470-01 270K
Download PeopleSoft Enterprise HRMS & Campus Solutions 9.0 - Student Administration Integration Pack V13509-01 355M
Note: for HRMS & CS Translation Pack, please refer to the Oracle E-Delivery, not listed the ML pack here.
Thanks,
Saxon SI

PeopleSoft Web Server installation Failing

You guys,
I am trying to set up PeopleSoft in a test envionment, in Red Hat Linux, for development purposes (the company that I work for maps Software Infrastructure).
I managed to install the Database Server and the Application Server, both the PeopleTools and their FSCM counterparts.
I am now trying to install the Web Server, with WebLogic 9.2. However, I am unable to complete the installation properly. After I choose all the various options in PsMpPIAInstall/setup.linux, I am prompted with this message:
Warning: /opt/PT8.49/webserv/peoplesoft/applications/people soft/PSOL.war/WEB-INF/lib does not exist. (PSChangeSharedLibPermission)
INSTALL FAILED!!!
The problem is, the directory /opt/PT8.49/webserv is completely empty. Is it supposed to be populated? When was it supposed to be populated? Which installation step did I misdo? Am I doing anything wrong?
The log file is empty, by the way, and I amn't really sure how to proceed.
Thanks for your replies.
Edoardo L'Astorina

What user did you use to run the PsMpPIAInstall ? Is it the owner of the Peopletools installation binaries ? Did you run the psconfig.sh script before running the deployment.
Have a look to that article I wrote some mone ago, seems similar issue :
http://gasparotto.blogspot.com/2008/02/peopletools-84900-and-pia.html
Nicolas.
Edited by: N. Gasparotto on Dec 15, 2008 9:13 PM

ITunes & Windows Vista Home - Error File C:\Program Data\Apple Computer\Installer\Cache\iTunes 10.5.142\iTunes.msi was rejected by digital signature policy.

Tried
https://discussions.apple.com/thread/2713232?start=0&tstart=0
and
http://www.vistax64.com/vista-general/159940-computer-blocking-anything-no-digit al-signature.html
with no avail!!!
iTunes opens after I click OK on the above message however I cannot do anything within the app its like Windows it preventing it from running.
PLEASE HELP!!!

Update:
I tried what the diagnostic told me to do, and repaired the installation. I was able to burn a CD in iTunes, but after I restarted, the drives have disappeared again! Here's the diagnostic info now:
Microsoft Windows Vista Home Edition (Build 6000)
MICRO-STAR INC. MS-6728
iTunes 7.6.0.29
QuickTime 7.4
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.3.26
iTunes Serial Number 20D6EAF059AB94B4
Current user is not an administrator.
The current local date and time is 2008-01-15 19:09:32.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., Radeon X1600/X1650 Series
ATI Technologies Inc., Radeon X1600/1650 Series Secondary
** External Plug-ins Information **
Plug-in Name: Last.fm iTunes plugin
Plug-in Loaded: Yes
Plug-in Version: 0.0.13
Plug-in File Version: 2.0.13.0
Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
No drives showed up to be tested.

Can no longer enter data in the address bar {url Bar}, it correctly follows data from google search bar. It was a 1 month old installation so not a lot of complications

I was not adding anything to Firefox. I Refused tool bars embedded in several application installs on this new computer. Was working fine. Then had a problem with Google search, restored default values and re-tooled Firefox. At this point all worked fine. Then my url, address bar changed color to the same color as the program shell, a grey brown as opposed to the white it was before. With the change in color it no longer allows me to change the data showing in the bar. I can not delete or add data. I used to add a url and navigate to the domain. Now I can not

Greetings,
TY for the reply, the information was enlightening to be sure. I never knew safe mode was an option with Firefox. I have so many tasks running that I didn't want to shut things down. What I did is turn off some of the last plug-ins I installed. That did not fix the problem at least in the first look. What happened next was very interesting none the less. I had a moment of mouse spastic wrist syndrome and accidentally moved a tab in such a way that it opened in a new window. The URL bar was white and editable. So I moved all my tabs to the new window and everything works as it should. I have restarted Firefox this morning and it came back with the bar editable and I am speechless to understand what I may have done to correct the problem if anything ??

Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM

Hello Experts,
we did some changes in the previosly uploded version of IPC AP 7.0 customer user exit Jar file in eclipse.
While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
when we checked the logs in SM 53 we seen the below mentioned error:
Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
--> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
at
if required i can post the complete stack trace.
any inputs/suggestions are most welcome.
Thanks & regards,
Siddharth

Hi Mark,
Yesterday after Posting the thread we found the same Note ,Issue occured because of JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
Thanks for your Help also.
Regards,
Siddharth

Installation problem with NW'04 SR1: database connection failed

Hi all,
while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
Below I attached the sapinst.log and jload.log with more detailed messages.
sapinst.log ###########
INFO 2007-03-12 22:06:24
Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
INFO 2007-03-12 22:06:24
Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
WARNING 2007-03-12 22:06:26
Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
12.03.2007 22:06:25 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.2007 22:06:26 com.sap.inst.jload.Jload main
SCHWERWIEGEND: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
ERROR 2007-03-12 22:06:26
CJS-20065 Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
jload.log ###########
12.03.07 22:06 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.07 22:06 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
Best regards,
Bernd

Hello Kairat,
Please follow the below mentioned guide to install it.
Check all the parameters to set and run pre requisite checker before starting installation.
Keep in mind that before starting any SAP installation you should always run prerequisite checker.
https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
Regards,
Amit Barnawal

Flash 12.0.0.77 plugin installs to wrong folder

In Vista x64, using either Firefox 28 or Firefox 24.4 ESR, the plugin installer (one downloaded from Adobe distribution) installs the 32 bit .dll file to \system32\macromedia\flash\ folder;
installs the 64 bit .dll to: \sysWOW64\macromedia\flash\ folder. So, they're exacly reversed.
I uninstalled it completely - went well. Then removed 1 remaining file in one of the above paths, then reinstalled. Did the same thing.
Before I did all this - I was *very sporadically* seeing the FlashPlayerPlugin_12_0_0_77.exe file, running (kinda "sitting") in background, in task manager. It never came to foreground w/ a UI, asking for anything. Couldn't figure out what it was, until started looking in the installation folders.
That's what lead to discovery the files were in wrong folders.
Anyone heard of this?
BTW, "Nayana" of Adobe Support chat, is a few bricks shy of a load. Or I am. I couldn't create an acct for forums. She kept saying, you don't need an acct - "just post your question. Other people will answer it."

EDIT: Seems there's no error in Flash installing to wrong folders, only error in my brain. Why didn't someone stop me from embarrassing myself?
System32 (in a 64 bit OS / architecture) is for 64 bit drivers, files; SysWOW64 is for 32 bit apps running in 64 bit OS.
https://en.wikipedia.org/wiki/WoW64
WoW64 (Windows 32-bit on Windows 64-bit) is a subsystem of the Windows operating system capable of running 32-bit applications and is included on all 64-bit versions of Windows
Also, http://www.samlogic.net/articles/32-64-bit-windows-folder-x86-syswow64.htm (section on SysWoW64)
End Edit.
Thanks for info on attaching images. A bit different than most forums. There's no "preview post" before submitting?
Screenshots of the 2 flash folder contents.
NOTE: I attached full FlashInstall.log earlier. I opened the 1.25 MB (text) file in an editor - copied contents to clipboard > paste to forum reply screen. Immediately locked up Firefox like a big dog. Couldn't perform any functions in Fx - not even reload or close browser. At same time, Fx memory use was continually climbing; to nearly 2 GB when I killed it. Won't make that mistake again.
Been many yrs since Fx locked up, doing anything. That aside, Adobe is definitely "different" than most forums. Almost like a person w/ no $ to use one of the many forum softwares available.
Most recent Flash installation logs.
C:\Windows\SysWOW64\Macromed\Flash\FlashInstall.log:
=O====== M/12.0.0.77 2014-03-27+18-59-59.282 ========
0000 [I] 00000010 "C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe" -maintain plugin
0001 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0002 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0003 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\RunOnce/FlashPlayerUpdate 2
0004 [W] 00001037 Software\Macromedia\FlashPlayerPlugin/ 2
0005 [W] 00001037 Software\Macromedia\FlashPlayer/SwfInstall 2
0006 [W] 00001021
0007 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0008 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0009 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0010 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0011 [W] 00001037 Software\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\System.ControlPanel.Category/C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl 2
0012 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0013 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0014 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0015 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0016 [W] 00001036 Software\Mozilla\Mozilla Thunderbird\extensions/Plugins 2
0017 [W] 00001036 Software\Mozilla\Thunderbird\extensions/Plugins 2
0018 [W] 00001036 Software\Opera Software/Last CommandLine 2
0019 [W] 00001036 Software\Opera Software/Last CommandLine 2
0020 [W] 00001036 Software\Opera Software/Plugin Path 2
0021 [W] 00001036 Software\Opera Software/Plugin Path 2
0022 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0023 [W] 00001015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe 5
0024 [I] 00000011 1
0025 [I] 00000012
=X====== M/12.0.0.77 2014-03-27+19-00-34.066 ========
=O====== M/12.0.0.77 2014-03-27+19-15-43.835 ========
0000 [I] 00000010 "E:\DOWNLOADS\Software\Multi Media\Browser PLUGINS\Flash Player\Flash Player Fx\install_flash_player_12.0.0.77_plugin002.exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0004 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0005 [I] 00000011 1
0006 [I] 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0007 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0008 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0009 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0010 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0011 [W] 00001036 Software\Mozilla\Mozilla Thunderbird\extensions/Plugins 2
0012 [W] 00001036 Software\Mozilla\Thunderbird\extensions/Plugins 2
0013 [W] 00001036 Software\Opera Software/Last CommandLine 2
0014 [W] 00001036 Software\Opera Software/Last CommandLine 2
0015 [W] 00001036 Software\Opera Software/Plugin Path 2
0016 [W] 00001036 Software\Opera Software/Plugin Path 2
0017 [I] 00000014 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32_12_0_0_77.dll
0018 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_12_0_0_77_Plugin.exe
0019 [I] 00000024 C:\Windows\SysWOW64\Macromed\Flash\plugin.vch
0020 [I] 00000017 C:\Windows\SysWOW64\Macromed\Flash
0021 [I] 00000022 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_12_0_0_77.exe
0022 [I] 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0023 [I] 00000021 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe
=X====== M/12.0.0.77 2014-03-27+19-16-11.879 ========

Installation problem on Solaris

I am trying to install sun one 7.0 on Solaris 8. The install is failing with this error:
ERROR - library load failed with following error: Can't load library: /opt/SUNWappserver7/lib/libinstallCore.so
INFO - End core server uninstallation
anyone know what causes this??
cheers

Looks like Solaris package installation failed and installer reverted to uninstallation sequence. For low level pkgadd log please check /var/sadm/install/logs/Sun_ONE_Application_Server_install.B<timestamp> file (timestamp is date and time of your installation attempt in mmddHHMM format).
Look for any errors in this file. Most likely thing that could have happened is that the installation of Java Help (SUNWjhrt) package failed because you didn't have existing package based J2SE installation on the system. If that's the case, workaround is to either preinstall package based J2SE installation or to selected option to install bundled J2SE that comes with application server.

Installation problem on CS4 Master Collection

WHen I attempt to install CS4 master collection on Vista Ultimate X64
While the installer is "checking system profile" the next window shows "Loading Setup"
I then get a System Check error page. The window label is "Adobe Creative Suite 4 Master Collection Installer - Alerts"
In the box it says, System Check.
Critical Errors were found in setup for Adobe Creative Suite 4 Master Collection.
Session has dependencies that cannot be satisfied.
please see the Setup log file for details. click Quit to exit Setup."
Then there is a Quit button, that is the only option.
Any ideas which services need to be enabled to be able to install creative suite?

I do have service pack 1 for vista ultimate x64.
Here is the end of the log....
[ 436] Thu Oct 30 19:12:48 2008 DEBUG
PayloadPolicyInit: BEGIN Updating installstate for payloads
PayloadPolicyInit: END Updating installstate for payloads
PayloadPolicyInit: BEGIN Creating policyNodes
PayloadPolicyNode._SetPayloadAction: none for {092DF7B0-6E10-4718-9763-9704CC4E6EF9} Adobe Anchor Service CS4
[ 436] Thu Oct 30 19:12:48 2008 ERROR
Unable to load fileOptions from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Options\Op tions.js
Log of: object
name {string}: TypeError
message {string}: 'collectionID' is null or not an object
number {number}: -2146823281
description {string}: 'collectionID' is null or not an object
[ 436] Thu Oct 30 19:12:48 2008 DEBUG
updating path to Win32
WizardControl: loading page "Progress" from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Progress\P rogress.js
updating path to Win32
WizardControl: loading page "Register" from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Register\R egister.js
updating path to Win32
WizardControl: loading page "Finish" from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Finish\Fin ish.js
HTML data complete: Welcome
HTML data complete: Eula
HTML data complete: Progress
HTML data complete: Register
HTML data complete: Finish
[ 436] Thu Oct 30 19:12:48 2008 ERROR
Critical errors were found in setup for Adobe Creative Suite 4 Master Collection:
- Session has dependencies that cannot be satisfied.
Please see the Setup log file for details. Click Quit to exit Setup.
[ 436] Thu Oct 30 19:17:23 2008 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
Doesn't really make sense to me....

FSCM91/PT8.52 installation

Similar Messages

Maybe you are looking for