FSCT (File Server Capacity Tool)

I have following questions.
1) Do we have Report on WINDOWS Server 2012 and Windows Server 2012 R2?
2) What kind of Hardware FC Storage Array are used as part of the testing (WIN2K8 R2)?
3) Apart from predefined scenarios, Is there a way I can write customer scenarios and hook this to the tool?
thanks, Your help is highly appreciated.
Sathya

Hi,
As this issue is related to File Server Capacity Tool, I recommend posting it in the following forum. You could get better answers from there.
http://social.technet.microsoft.com/Forums/en-US/home?forum=fsct
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Migrate File Server data from one volume to another

I am looking for the best way to handle this situation. We have a VHD that has a 4KB cluster size that is getting close to the 16TB mark so no expanding past that due to the cluster size. In the past whenever i needed to pull this off i would preload as
much data as possible with robocopy, then during a maintenance window take the share offline, do a refresh with robocopy then flip everything that i needed to flip drive letter and share setup etc.
I have the space to do a complete copy like this so that is not an issue. But other things to keep in mind are the data is deduplicated so we are talking 20TB total. The other is the backup of the File Server is done at a file level with DPM so DPM will
see this as a new volume and be an issue.
At this point i have time to plan and am just looking for ideas.

Hi,
If you want to copy files/folders from one Volume to another volume, you could use the File Server Migration Tool (FSMT) or Robocopy to accomplish.
The tool can move all of the files from the shares on your original volume to the new volume.
FSMT and Robocopy will not copy Share permissions but only NTFS permissions. So if the drive letter will not be changed, you can backup and restore the Share permission with steps here:
Saving and restoring existing Windows shares
http://support.microsoft.com/kb/125996
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
Scott

Hi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?

File Server Resource Manager will not load WMI Objects on Windows 8.0/8.1 Preview with Hyper-V and Server Tools Loaded

Hi Folks,
I have a problem getting "File Server Resource Manager" to start properly because WMI objects are not loading??? I don't understand this at all because I am able to access them with other Apps, etc. I have been over my Services list as well but
have not yet discovered which Service turns on/off "File Server Resource Manager". I have looked in Windows\System32\ and I can not find SrmSvc. I found other Srm's there though. I also found the FSRM Snapin which generates the Figure below but I
can not find it in the WMI Browser. I believe the Firewall is OKAY since I have been over that thoroughly. I do have the Server Tools Installed for Windows 8.0 or Windows 8.1 Clients as well as the Windows Updates applied, which is where I got "File Server
Resource Manager" in the first place. I have had WMI and Powershell 3.0 Package, installed since Windows 7 but I run a repair on them anyway.
I have read through "File Server Resource Manager could not load WMI objects on Windows Server 2012
Article ID: 2831687" but since I don't seem to have SrmSvc the solution doesn't help me. I haven't been able to find a similar one for the Windows Client.
If there is anything you could share on this problem I would be much obliged.
Thanks again,
Crysta
PhotM Phantom of the Mobile

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Server admin tool's help file broken ?

Hi,
SL Server 10.6.4
I'm trying to open the help file of the server admin tool but it seems to be broken : 100% CPU, beachball. The same occurs with the file included in the standalone bundle (see http://support.apple.com/downloads/ServerAdmin_Tools_106) installed on a SL 10.6.4 client.
Anybody having the problem too ? Any idea ?
Thanks

Hi,
SL Server 10.6.4
I'm trying to open the help file of the server admin tool but it seems to be broken : 100% CPU, beachball. The same occurs with the file included in the standalone bundle (see http://support.apple.com/downloads/ServerAdmin_Tools_106) installed on a SL 10.6.4 client.
Anybody having the problem too ? Any idea ?
Thanks

FSCT - Having Error "There were errors during running WordFileClose.dll scenario" when running the FSCT in controller & non-windows file server

I encounter 2 errors in the controller when running FSCT.
- "There were errors during running WordFileClose.dll scenario"
- "There were errors during running WordFileClose.dll scenario"
Does anyone has any ideas for this errors?
I am using the following server to run the FSCT:
- AD Server: Windows 2008 R2 SP1 x64
- FSCT Controller: Windows 2008 R2 SP1 x64
- Client: Windows 7 x64
- File Server: Non-Windows Server (EMC Isilon)
And the commands are as follows:
> fsct prepare dc /users 10 /clients testing /password password
> fsct prepare controller
> fsct prepare client /server ofscluster /password password /users 10 /domain abc.local /server_ip 192.168.2.16
> fsct prepare server /clients testing /password password /users 10 /domain abc.local /volumes \\ofscluster\fsroot1 /workload HomeFolders /create_only_fileset
> fsct run client /controller fsctcon /server ofscluster /password password /domain abc.local
fsct run controller /server ofscluster /password password /volumes \\ofscluster\fsroot1 /clients testing /min_users 2 /max_users 10 /step 2 /duration 360 /workload HomeFolders

Dear all,
The errors were:
<Error>1264 DeviceIoControl 1{WINERR}</Error>
<Error>Error executing scenario: WordFileOpen.dll</Error>
<Error>943 DeviceIoControl 50{WINERR}</Error>
<Error>Error executing scenario: WordFileClose.dll</Error>
Do you have any idea about what the errors mean?
Thanks,
Rayson

Where can get file of SBO 2004 Server Installation Tool

Hi,there
Who knows where can I get the tools of
"SAP Business One 2004 Server Installation Tool"
It's now invalide from SAP SDN downloads URL,
If anyone have this tool please let me get it from you.
I'd like use it install B1 2004 & 2005 in a same OS.
Thanks in advance!
Lanjun

Hi Lanjun,
I got the information from responsible people that SDN is upgrading recently, the address is changed. Please try the latest one for Installation Tool below.
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/94a08a56-0701-0010-1690-958e7770dc20 [original link is broken]
HTH,
Nick

Can you set a max size for a folder on a file server

I've got a G5 Xserve that I'm using as a file server running 10.3.9. I need more space on my array so I bought bigger drives and will move the data to the new, larger array.
For the health of my drives, I want my array to maintain at least 10% free space so I would like for the people using the shares to only see 90% of the larger space. (I don't want to have to be the 'drive space' policeman 6 months from now when the RAID fills up again)
I know I could create 2 partitions in diskutil but I'd like something more dynamic.
Ideally I'd like to put my shared folders inside of a main folder and tell Server to only display 90% of the size of the partition when a folder from the partition is mounted remotely. That way people won't know there is a quota which keeps them from trying to copy data into a share that shows 10% free space.
The shares are used by both macs and PCs so I'd rather not go with a solution based upon network protocol.
Many Thanks,
Paul
G5 Xserve Mac OS X (10.3.9)

There's no way I'm aware of to artificially display a different capacity/available space than what's actually there. If it's a 1TB volume, it's a 1TB volume and the OS isn't going to report that as 900GB.
The only other solutions I can think of is to either enable quotas which will let you restrict the amount of disk space any user can consume, or attach a folder action to the volume where the script automatically checks the volume size whenever new files are added and takes action at the appropriate time (you need to define what that action is, though).

Shadow Copies on 2012 R2 File Server Cluster

Hello all!
I've inherited a two node physical 2012 R2 file server cluster that contains a few SMB shares on a single clustered disk. I'd like to enable shadow copies for this shared disk but want to store the shadow copy data on its own shared disk
as per shadow copy best practices (at least on non-clustered file servers).
I created a second cluster disk, assigned it to the same resources as the SMB clustered disk.
Now historically I've enabled shadow copies through computer management but I want to ensure the shadow copies are cluster aware so in the Failover Cluster Manager I open Storage | Disks and right click the SMB cluster disk and click the Shadow Copies tab.
From the tab I can Enable shadow copies, this sounds like what I'm looking for, unfortunately it does not give me an option to choose a disk/volume to store my shadow copy data, so this can't be right.
My next step was to connect computer management to the cluster virtual server name (NOCFS4) and through the System Tools | Shared Folders | All Tasks | Configure Shadow Copies it shows me the correct number of shares on the SMB cluster disk plus
I can see the Settings button for configuring the location and size limit for shadow copies, however once I tweak the shadow copy location and size settings, click Ok and click Enable to turn on the shadow copies I get a long pause and an error about
not being able to create a schedule. So it seems connecting to the cluster virtual object is not the answer either.
That leaves using computer management to connect to one of the physical server nodes of the cluster. When I open the shadow copy interface on the physical node I note that it shows a 0 for the number of shares it detects on the SMB clustered disk.
This doesn't surprise me since this interface isn't cluster resource aware.
So I'm stuck. Does anyone know the "Microsoft way" to enable shadow copies on a clustered disk while storing the shadow copy data on a second cluster disk both attached to the same cluster resource?

Hi guys
I spotted exactly same problem right now on Windows 2012 R2 with latest updates.
Enabling Shadow Copy via Cluster Manager on disk will enable schedule and snapshots but schedule is not-cluster aware (is created locally on node) and "Previous Versions" are visible only locally but not via shared folders (UNC path accesible by
clients)
When I spotted this behavior I tried different way going via Computer Management and cluster resource name but console always hangs for me when using "Configure Shadow Copies". After many minutes configuration window is opened (Hurray!) but any
action there will hang whole console again. Enabling Shadow Copies will fail with "0x80004005: Unspecified
error" for creating scheduled task but "Next Run Time" column still shows "Disabled". Checking disk resource via Cluster Manager shows it is enabled and ?local? scheduled task is created.
Computer management console still shows DISABLED and any action freezes whole console (only when cluster resource name is used).
This fix I found, unfortunately, is not applicable to 2012 R2 OS: https://support.microsoft.com/en-us/kb/2894464
To sum up there is a major bug in MS implementation in Shadow Copies for Shared Folders when clustering is used or it is still not supported in 2012 R2? Doing it outside cluster works as it should (without freezes and Previous Versions are available via
UNC)
There is no documentation about FileServer Clustering on 2012(R2) unfortunately.
Could someone from MS clarify it?
Many thanks
Filip
EDIT:
Ok, one correction:
Scheduled task is not created in "Failover Clustering" hive of Scheduled tasks as user may expect but failover of fileshare to other node will unregister/reregister it on active node only.

File sharing in the File server preference pane

System preferences to File Server to File sharing. When I choose a share point folder and want to change permissions, I click the radio button to restrict access to certain users and save. When I re-enter the the folder it defaults back to let everybody have access. If I try to delete the folder it won't delete. When I create a new folder by re-choosing the folder, I get <folder Name>1 and then I cannot delete it. Is there a plist in preferences I can delete to clear this problem?

Hello Peter,
Thanks for your answer.
There must be something wrong in the different steps I follow.
Firts I set Time machine on the server for each user, shoosing the Volume "SmartStor" (a network volume attached on the Mac Mini server) it creates a "Shared items" folder with a "Backups" folder in.
In Server Admin tools I can see in the AFP services the share point /Backups
In Workgroup Manager I set the Time Machine's preferences for the different computers and computers' group with the path afp://myserver.local/Backups/
At least on my client's computer I can shoose the volume "Backups" "on my server".
And it doesn't work... even with all the logins and password, User's, Dir Admin and Server Admin.
With User's and Dir Admin it runs quickly and tells "the volume is not reachable on account of wrong user's name or password"
With Server Admin login and password it runs indefinitly, nothing occurs ...
Is there something to do in terminal ?
Well I tried to find explanations on the web but I found nothing for the moment... The informations are to set a network volume in Terminal in place of the default one...
'Hope to find soon, I can't stand that something runs for every one but not with me...

Time Capsule as a File Server - to replace existing Airport Extreme

Hi
I have a 4th Gen Airport Extreme connected to my cable modem. I was thinking of getting a 2013 Time Capsule to replace my existing 4th Gen 2009 Airport Extreme, to use for Time Machine Backups and also for storing other files which I can access from anywhere only.
Is Time Capsule just a great wirelsss router and backup device or is it any good as a basic file server / nas drive.
Thanks in advance.
Matt

Is Time Capsule just a great wirelsss router and backup device
Yes, it is that.
is it any good as a basic file server / nas drive.
It is not a good NAS.. primary issue.. no internal backup. No way for the TC to back itself up.
No way for Time Machine to backup a network drive.
It still lacks any proper high speed connections for a second hard drive.. usb2 doesn't cut it.
The tools are poor.. actually almost non-existent. No partitioning.. so mixing backups and data is not a great idea.
See Q3 Pondini. http://pondini.org/TM/Time_Capsule.html
Nothing has changed with this new one.
There are no media servers. no ftp, http, or any other access method for files such as is common to the basic NAS of the world.
To say nothing of rsync and all those kinds of things.
It is still slow to spin up and quick to spin down.. fine for data.. not so great for streaming media.
Remote access can be difficult if you cannot get the TC as the main router in the network.

Time Capsule as a classroom WAP and file server?

Hello all:
I am teaching a new course, Big History, which has been developed to take advantage of iPad or other tablets in a WiFi classroom setting.
As our school does not have a school-wide WiFi setup (wired LAN only) I am working together with our IT techie to implement a Time Capsule in our classroom only.
Security and limited access is of paramount importance due to regulations here in Spain, i.e., students may only access those sites required by the course and can't use classtime to play around. I won't be buying the gear until I know it will function as needed...
This WiFi setup is a pilot project, and if successful will lead to a school-wide rollout of WiFi and iPad teaching.
The success of this implementation depends on getting it right...then we can join the 21st century...so I could really use some help here. Here's what we know so far.
The school's wired LAN must have the restrictions in place as mentioned above, and it would be impractical to selectively unblock specific laptops in the computer lab during my class teaching hours and only for the students in my class.
Every day's instruction needs different sites unblocked. So you can see this would be cumbersome for the techie...that is, he doesn't want to do it.
All of my students already have their own tablet devices with WiFi, so it's BYOD.
We will connect the TC via its WAN port to the school's wired system. The techie will set us up as a "sub" network, in effect bypassing the schools main LAN, and we will have no restrictions.
The TC will then act as a WAP and basic file server for classroom resources and for students to pass in homework.
We will then set up a user's group for access to not only the Internet, but also files stored on the TC's hard drive.
Kids will be kids. If we don't limit access to the TC's WiFi, I fully expect that my students will give out their logins and passwords, and will tell other students when I am holding the class so they could use the WiFi surreptitiously. Kudos to the kids for being clever, if I were a teenager again I'd do it too...but it ain't gonna happen.
So far we have concluded that to avoid this: I will take the TC with me when class has ended; and each student's device will be registered as a user by it's MAC Nº.
My immediate questions:
Will this work as I have described? Have I missed something?
I have read elsewhere in other Apple support threads that I may be asking something of the TC that Apple has not envisaged...in order to use TC as I want, we need a specific configuration to access the Internet and also to allow guests on the network?
I will be using my MacBook, connected via Minidisplay port -- VGA adapter to the classroom projector and audio. I will be access the same files on the TC that my students do. How do I protect my files on my MacBook from intrusion? That is, students can only see what's on the TC's drive.
The students can upload their homework to TC and also download files from the TC to their devices for homework, further study, etc. Yes? This will work?
This is enough for one post...any assistance would be greatly appreciated.
Also, if any Apple Education personel and/or gurus are monitoring, please feel free to chime in. If I am successful in this pilot project, it means another school joins the Apple Family (700 iPads!!!! How cool is that?)
Many thanks in advance to all,
Steve Russell
Laude International College

Kinda disappointed that after 80 views no one could offer an opinion or solution. I went out and did my own research.
Here's the deal:
Time Capsule is designed for domestic / professionals who might have a design studio, etc., i.e., for users to have as a wireless backup device for all of their personal stuff (photos, videos, music and suchlike) and to have a permanent resource for every iteration of any work in progress they've ever done.
TC and it's software is not able to easily, or practically, provide a file server type of environment for multiple users, such as in my application for the classroom. It's just to much of a hassle. Moreover, the TC (and the Extreme for that matter) is a "dumb" device...no processor, no RAM. Power supply, WiFi and a drive, basically. It's the wrong tool for my job, as cool as it is for other applications.
Moreover, IMHO, TC is designed primarily for the USA, or any other region where the internet provider usually only supplies a cable/POTS modem. Both the TC and Extreme are best described as Routers in this instance. Here in Europe, at least in Spain, our providers supply a modem-router combination box. In order to use the AC or AE, I'll have to cable in from the modem router WAN to AC/AE WAN port, and then have to go into the M-R and turn off WiFi. Then I have to fiddle around with channels, and perhaps (hopefully not) ask my ISP for a gateway password. My Spanish MAC geek pals tell me that's not necessary. It's a kafuffle for the unitiated, but reasonably easily done.
For true classroom use and all the stuff I want to do, one needs some sort of server environment. For me, it's going to be a MAC Mini + OS X Server cabled to Extreme over LAN. For my use, the 2 or 3 TB drive in the TC is superfluous, more hassle than it's worth and of little use in my specific application. Yeah, I could load OS X Server on my laptop, it's only €19.99, but that ain't gonna happen, not even on a partitioned disk. I'll cable lappy into the Mini as well. WiFi's for my BYOD students.
BTW, I'll be buying the middle range Mini, 4 GB RAM, faster processor, with a Fusion Drive, and 3rd party RAM to 16 GB, and buy OS X Server for €19.99. BUT, I'm going to wait to see if there is a refresh later in the Fall with the launch of Mavericks.
Hope this helps any others thinking about a similar situation.
All the best,
Steve

Upgrade to Windows 8.1 Pro from Windows 8 Pro causing issues with Remote Server Administration Tools

Last night I received the Windows 8.1 update and it has caused Remote Server Administration Tools to stop working. I tried to reinstall the tools using Windows8.1-KB2693643-x64.msu but get the following error:
Windows Update Standalone Installer
Installer encountered an error: 0x8007000d
The data is invalid.
In the event log I have the following error
Windows update could not be installed because of error 2147942413 "The data is invalid." (Command line: ""C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu" ")
System
Provider
[ Name]
Microsoft-Windows-WUSA
[ Guid]
{09608C12-C1DA-4104-A6FE-B959CF57560A}
EventID
3
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-11-05T12:14:18.035865000Z
EventRecordID
1562
Correlation
Execution
[ ProcessID]
5224
[ ThreadID]
5132
Channel
Setup
Computer
removed
Security
[ UserID]
S-1-5-21-1644491937-764733703-854245398-1794
EventData
UpdateTitle
ErrorCode
2147942413
ErrorString
The data is invalid.
CommandLine
"C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu"
I did have the Remote Server Administration Tools installed previously when I was running windows 8 pro and everything was fine. I've tried to remove the older version but according to the below it isn't even installed and Remote Server Administration
Tools doesn't appear in Turn Windows features on or off.
c:\RSAT>dism /online /Get-Packages
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
Packages listing:
Package Identity : Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.3.9600.16384
State : Installed
Release Type : Language Pack
Install Time : 24/09/2014 06:33
Package Identity : Microsoft-Windows-Embedded-EmbeddedLockdown-Package-TopLevel~31bf3856ad364e35~amd64~~7.3.9600.17116
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Foundation
Install Time : 22/08/2013 14:46
Package Identity : Package_for_KB2891214~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2902816~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2920189~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931358~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931366~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2932046~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2934018~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937220~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937592~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938439~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938772~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939153~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2949621~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Hotfix
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2950153~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2954879~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2955164~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2956575~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958262~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958263~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959626~31bf3856ad364e35~amd64~~6.3.3.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959977~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2961072~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962140~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962872~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2964718~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965142~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965500~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966407~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966870~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2967162~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2968296~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2968599~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2969817~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971203~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971850~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2972103~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2972280~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973201~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973351~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2974008~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2975061~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 07:11
Package Identity : Package_for_KB2975719~31bf3856ad364e35~amd64~~6.3.1.8
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2976978~31bf3856ad364e35~amd64~~6.3.2.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2977292~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2978041~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979573~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979582~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2980654~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2987107~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2989542~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2990532~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2993651~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2998174~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000061~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000869~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000988~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
The operation completed successfully.
Any help on this issue would be appreciated, if you need any further information please let me know.
Thanks

SeniorInternet,
I’ve seen this issue in the past and it occurred because the file was corrupted.
It’s possible that something went wrong when downloading it originally on your newly upgraded machine.
Try downloading
KB2693643 again from another machine and install it.
Hope this helps!
Mike
Windows Outreach Team – IT Pro
Windows for IT Pros on TechNet

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insight

Found the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual.

Failure Installing SQL Server Data Tools 2012 on Windows 8.1

I am trying to install SQL Server 2012 with SQL Server Data Tools on my laptop with Windows 8.1 standard edition. It fails each time when it gets to the SSDT installation with the same 1935 error, other features still install. The error
text is as follows:
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please
refer to Help and Support for more information. HRESULT: 0x80073715.
Windows Installer file: F:\1033_ENU_LP\x64\setup\x64\SharedManagementObjects.msi
Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140220_201634\SharedManagementObjects_Cpu64_1.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC80C325
I have disabled any antivirus software that may have been interfering and am not sure what else to try. Any assistance on how to resolve this error would be greatly appreciated.

Hello,
Please read the following article about the cause of that error:
http://support.microsoft.com/kb/2688946/en-us
I would like to recommend you the following procedure:
http://www.sqlcoffee.com/SQLServer2012_0008.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

FSCT (File Server Capacity Tool)

Similar Messages

Maybe you are looking for