FSG: Reporting Attributes Showing in one column for multiple segments

I am doing an FSG and and trying to run it through Program - Publish FSG Report and using the template provided but having a problem with the first coulmn of the report. The first column of the report is bunching up all the segments in one column instead of seperating it in multiple columns. For eg. 5100 Travel expense instead of in two different coumns is put together in one column. I have tried lot of things but none of them fixed it.
I would be glad to know anything that can solve or lead to a solution to this problem
Arun

Yes, I did. I had chose four segment descriptions there and I had something like 30-35 as the space for them. I have also checked the starting value of the column set. It looks ok. The XML BI Publisher is unable to seggregate them it seems for some reason.
Arun

Similar Messages

  • I am setting up a Numbers table for gas milage using one column for gallons divided by the next column of miles and having the answer in the third column in miles per gallon.

    I am setting up a Numbers table for gas milage using one column for miles and the next column for gallons, the two to be divided to produce the third column of miles per gallon and am unable to find out how to do that.  Add and/or subtract, yes, but not to divide.

    ...and results in yield signs indicating an error:
    Hi Wayne,
    Yield signs must be different in Texas. Here (and in much of the rest of the world) they're white with a red border, and installed with an apex pointing down:
    Some still include the word "Yield" (or in Quebec, "Cedez"in black letters.
    Maybe you're thinking of the "Warning triangle", which is similar, but installed base down, and often including a symbol in the white space:
    These are more common in Europe, with the exception of the portable version, which I've seen used at road construction sites or as 'flares' to warn of a disabled vehicle on the road.
    Or maybe you were thinking of this
    (Most of these 'slow moving vehicle' triangles have an orange center. This one looked a bit more 'Texas,' though.)
    Cheers,
    Barry

  • One TPV for multiple Countries

    Hi Experts,
    Could you pls share experirnce/knowledge around having one TPV for multiple countries together. The scenario is like below:
    1. There are mutiple Countries in Central America which are small islands for whom we need to roll out the Travel and Expense Solution.
    2. The Company code is only one which contains employees from all these Countries.
    Could you tell us how can we do the setup. Should we create one TPV at the company code level. OR should we rather use some other criteria for selecting the TPV maybe at the Personnel area or Personnel Sub Area level.
    Your help is much appreciated.
    Regards,
    Vijay

    Hi Kiron,
    These things I am aware about too. My real question is if I create only one TPV for the company code and assign the Country of the Company code then what issues would this cause. To name a few pls see below.
    1) The domestic Country would always be the Company code Country so would be treated as Domestic Country and show on the Form also as domestic Country even for the employees who are from other Countries.
    2) There are setting which SAP allows differently for Domestic and International like per diem, miles cumulations. So these necessarily have to be kept as same even though local laws are different in all these countries as Domestic is only the Company code Country.
    So I need detailed analysis of what impact I will have by having only one TPV as against making many TPV like one for each Country by using some other parameter like Personnel area/Personnel sub area etc.
    Appreciate your help!
    Regards,
    Vijay

  • How can I separate one column into multiple column?

    How can I separate one column into multiple column?
    This is what I have:
    BUYER_ID ATTRIBUTE_NAME ATTRIBUTE_VALUE
    0001 PHONE_NUMBER 555-555-0001
    0001 EMAIL [email protected]
    0001 CURRENCY USD
    0002 PHONE_NUMBER 555-555-0002
    0002 EMAIL [email protected]
    0002 CURRENCY USD
    0003 PHONE_NUMBER 555-555-0003
    0003 EMAIL [email protected]
    0003 CURRENCY CAD
    This is what I would like to have:
    BUYER_ID PHONE_NUMBER EMAIL CURRENCY
    0001 555-555-0001 [email protected] USD
    0002 555-555-0002 [email protected] USD
    0003 555-555-0003 [email protected] CAD
    Any help would be greatly appreciated.

    This is another solution. Suppose your actual table's name is test(which has the redundant data). create a table like this:
    CREATE TABLE test2 (BUYER_ID number(10),PHONE_NUMBER varchar2(50),EMAIL varchar2(50),CURRENCY varchar2(50));
    then you will type this procedure:
    declare
    phone_number_v varchar2(50);
    EMAIL_v varchar2(50);
    CURRENCY_v varchar2(50);
    cursor my_test is select * from test;
    begin
    for my_test_curs in my_test loop
    select ATTRIBUTE_VALUE INTO phone_number_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='PHONE_NUMBER';
    select ATTRIBUTE_VALUE INTO EMAIL_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='EMAIL';
    select ATTRIBUTE_VALUE INTO CURRENCY_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='CURRENCY';
    INSERT INTO test2
    VALUES (my_test_curs.person_id,phone_number_v,EMAIL_v,CURRENCY_v);
    END LOOP;
    END;
    Then you will create your final table like this:
    create table final_table as select * from test2 where 1=2;
    After that write this code:
    INSERT ALL
    into final_table
    SELECT DISTINCT(BUYER_ID),PHONE_NUMBER,EMAIL,CURRENCY
    FROM TEST2;
    If you have a huge amount of data in your original table this solution may take a long time to do what you need.

  • Can i install itunes multiple times on one computer for multiple users?

    Can i install itunes multiple times on one computer for multiple users?

    Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
    tt2

  • How to create one delivery for multiple sales order

    Hi!! Friends,
    Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
    Regards
    AKASH
    Message was edited by:
            AKASH TAMBI

    Hi.,
                  You can combine different orders in to one delivery ,But for the customer Order combination should be checked in  the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • How to create one TO for multiple TRs

    Dear All,
    how to create one TO for multiple TRs, kindly suggest me
    Regards,
    balu

    As for your question: it is discussed in sAP online help:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
    Sorry I misunderstood your question.
    The above mentioned solution won't create one single TO from multiple TR.
    Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

  • One invoice for multiple deliveries

    Hi Gurus,
    Can any one tell how can i create one invoice for multiple deliveries.
    Regards,
    Vinod

    one invoice for multiple delivers we can do in vf04
    we can do in vf04
    reward points if it is help ful
    Thanks
    mubeen
    Edited by: mahammad mubeen on Mar 5, 2008 10:02 AM

  • One cheque for multiple vendors

    hi,
    is it possible to generate one cheque for multiple vendors ?
    cheque will be sent to bank and bank will deposit the amounts into vendor banks.
    Can you anybody help me?
    regards,
    kalyan

    Hi
    Yes. you can do it 
    First transfer the amount to bank and from there bank will transfer the amount to respective vendors through ther banks.
    Go for implementing automatic payment programme according to your client reqyuirement. Check  TCode F110 which is master transaction for APP.  Check at TCode F110-Environment-maintain Config.....
    Cheers
    Srinivas

  • One lockbox for multiple company codes

    Is it possible to have one lockbox for multiple company codes?

    No, I don't think so. Lockbox is 1:1 for a Company Code.
    You configure Lockbox for a Company Code.
    You can use one of the 2 available Lockbox user exits (not sure which) to write a piece of code that searches invoices against the customer posted to different company codes. You will have to have the intercompany setups.
    You may find an OSS notes for intercompany clearing.
    Hope this helps!

  • One delivery for multiple STO's

    Folks,
    I have multiple STO's for the same ship-to (plant). Items due for shipping would need to be combined into 1 delivery and not 1 delivery per STO.
    Would this be possible? And if yes, how?
    Thanks,
    MZ

    Hi ,
    Yes , We can create one delivery for multiple PO's .
    Go to VL10D tcode --> Purchase order tab -- > enter the STO's and press execute
    Select the STO's and click on background tab. Then it creates the log
    Select the item again and press shift +F4
    It will gives the log inforamation for the STO's and select the item and press on documents tab.
    It will creates only one Delivery for all the STO's.
    Now go to VL02N tcode and enter the delivery number then goto picking tab then enter picking qnty = delivery qnty
    then press on " post goods issue "
    Now go to MIGO to do the goods reciept then enter all the STO's here and check the item then save .
    Only one document will be posted for all the STO's
    Regards,
    Usha.

  • One OCS for multiple Company´s ???

    Hello,
    It´s possible to install multiple "areas" on one OCS? We want to provide a OCS for our customers. They shouldn´t see other caledars or adress-book. Only ther own "area".
    KR
    Mathias

    Hi ,
    Yes , We can create one delivery for multiple PO's .
    Go to VL10D tcode --> Purchase order tab -- > enter the STO's and press execute
    Select the STO's and click on background tab. Then it creates the log
    Select the item again and press shift +F4
    It will gives the log inforamation for the STO's and select the item and press on documents tab.
    It will creates only one Delivery for all the STO's.
    Now go to VL02N tcode and enter the delivery number then goto picking tab then enter picking qnty = delivery qnty
    then press on " post goods issue "
    Now go to MIGO to do the goods reciept then enter all the STO's here and check the item then save .
    Only one document will be posted for all the STO's
    Regards,
    Usha.

  • One inventory for multiple ORACLE_HOMEs ?

    RDBMS version:11.2, 10.2
    Platform : AIX
    In one server , we are going to install multiple ORACLE_HOMEs (both 10.2 and 11.2). I have been asked to configure separate inventory for each ORACLE_HOME (each inventory within its own ORACLE_HOME). But i came across OTN posts which advices one inventory for all ORACLE_HOMEs .
    1. How can i create 1 inventory for all ORACLE_HOMEs . Is it by specifying an inventory directory outside all ORACLE_HOMEs in OUI when you do the very first installation ?
    2. Which one is more professional : one inventory for each ORACLE_HOME or one inventory for all ORACLE_HOMEs ?

    When installing Oracle software for the first time, the OUI will create a "global" inventory under $ORACLE_BASE.
    Depending on you OS, to locate this inventory look at "/etc/oraInst.loc" (AIX+Others) or "/var/opt/oracle/oraInst.loc" (Linux+others).
    You can add/remove Oracle homes from this inventory by using OUI or command line ./runInstaller.
    Each Oracle home may also contain an "$ORACLE_HOME/oraInst.loc" file.
    HTH
    PS: +"One inventory for multiple ORACLE_HOME is a bad practice"+ -- Untrue. Perhaps only for those that don't know how to use it.
    :p

  • Shall I use one datasource for multiple connection pool?

    Hi,
    I need to clarrify that, Shall I use one Datasource for multiple connection pool in distributed transaction?
    Thanks with regards
    Suresh

    No. If its transactions across multiple databases you should use different datasources.

  • Can I add/show a size column for smart folders?

    I've created a set of smart folders to filter the files on my system by size (e.g. <10megs, 10-499megs, 500-999megs and >1Gig.
    What I'd like to do is sort the files by size, so having the folder show a size column would be great... however it doesn't seem to be possible (or the how is not publicized). It just shows name, kind and last opened. If I change the view to ICON, I can get the size for some files, but others, like movies or music, show their duration, not size.
    Any ideas?
    Thanks
    Gary

    If you want to report this to Apple, send a bug report (or enhancement request) via its Bug Reporter system. Join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. You'll get a get a Bug or ER ID number; thus, starting a dialog directly with engineering.

Maybe you are looking for