FSRM 2008 R2 reporting inaccurate quota usage amounts

I've got a Win2008r2 Enterprise server with FSRM 2008R2 installed. I switched someone's quota from soft to hard when they reached 472% of their quota, to try to curb their appetite for disk space! They cleaned things up significantly, and came
well under their usage limit. They then tried to save something and they can't. I have disabled and re-enabled their quota, I've ensured there are no nested quotas, but it still shows the % Used as 472%. I've emptied their directory completely
and refreshed the FSRM view and still no luck.
I'm unable to determine the correct version of FSRM. Does anyone know how to tell if I'm running Update2 or not, or if there are any updates to it at all that are available? I am at my wits end trying to get this thing to refresh!
Thanks,
Joe

I have the same problem for one of 2198 quotas (so far). The same directory quota (hard quota) for one particular user has reached 100% and blocked access 4 times now. I can delete the quota and re-create it and it will work for a couple
months before it denies access again. There is nothing unique about this user that I know of. I have had no other reports of people being denied access due to quota so I think it is isolated to this one user.
Thank you,
Scott

Similar Messages

FRSM Randomly Reports Incorrect Quota Usage

We are using Server 2008 with FSRM 6.1 and are randomly seeing some quotas reporting incorrectly that they are at 100%. If the folder is checked they are well under the quota but FRSM still reports it as 100% even after a refresh.
The only way that I have seen the quotas reporting as normal is when we delete them and recreate them but it returns a few weeks later.
This is only happening on one file server (we have several that FRSM manages the quota allocations for) and disk compression has not been turned on for that volume. This also is not happening to every quota on that volume, only some.
Any ideas?

Hi,
Firstly, please refer to the thread to check if the disk usage of the folder is reported correctly:
Server 2008R2 reports disk size/free space incorrectly in explorer and disk manager
http://social.technet.microsoft.com/Forums/en-US/bf5445d5-e796-4cbb-9571-8639b900cfd4/server-2008r2-reports-disk-sizefree-space-incorrectly-in-explorer-and-disk-manager?forum=winserverfiles
Then check if your current account have permissions to access subfolders. If the user does not have permission to access all subfolder. The size of some folders will not be counted with right click on a folder.
FSRM usage quota incorrect after deletion of 'RECYCLER' folder
http://social.technet.microsoft.com/Forums/en-US/4a076bd3-6e84-4392-9d1a-d93e67a9c319/fsrm-usage-quota-incorrect-after-deletion-of-recycler-folder?forum=winserver8gen
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

FSRM reporting quote usage larger than the actual Size

File server resource manager is reporting quote usage larger than the actual Size or even “Size on Disk”. The only theory I have so far is that the FSRM is counting data in Shadow Copy. Does FSRM count data in Shadow Copy?

Hi,
Please check if you turn on the NTFS file system compression functionality or if you compress the files that you own on an NTFS volume. If so, the disk quota that you are charged increases.
Disk Quota Charges Increase If You Turn On the NTFS Compression Functionality
http://support.microsoft.com/kb/320686/en-us
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Ssrs 2008 r2 display only final total amount

In an existing ssrs 2008 r2 report, I want the final grand total to appear as the last amount displayed in the SSRS report.
In the 'main' matrix of the report, I have created an outside group row below the last line of the matrix.
The expresion for this statement looks the the following:
="Grand Total: $"+str(sum(cdec(Fields!TransactionAmount.Value),"datasetname")).
The total amount is correct, but this total amount line appears after every control break. Basically the amount appears every
time the control break changes by date, teacher, or student number.
The extra row I added does contain grouping references to date, teacher, and student number. Thus to solve my problem:
1. Can you tell me how to remove the grouping references to date, teacher, and student number so that the last row will be the only place the total amount will be displayed?
2. If the above is not an option, can you tell me how to add an extra row to the 'main' matrix so the report groupings do not appear on the final total line?
3. If the above 2 choices are not an option, would you tell me how to add the final total line in the final report footer and/or any place you believe the final total amount will appear only one time?

Hi Wendy,
According to your description, you want to add a row into your matrix to get the total value of TransactionAmount. This can be final total value which appears only one time in your matrix. Right?
In this scenario, the reason why the total amount line appears after each break change (data, teacher..) because this total amount line is still within the parent group. I guess you didn't add the outside group row on the top parent group. So we just need
to right click on the textbox which is top parent group, insert a row outside of group. Then put your expression into the added row. Now the total amount will appear only one time in the matrix. It looks like below:
Reference:
Understanding Groups (Report Builder and SSRS)
If you have any feedback on our support, please click
here.
Best Regards,
Simon Hou

Adobe Bridge Reports Inaccurate File sizes

Im still in CS4 but can't seem to find a forum on CS4. In any case, why does Bridge report inaccurate file sizes? I thought I could use bridge to select all of the M2V files in a folder which I wanted to use in an Encore DVD project to get an accurate total file size. That way I would know if all of the selected files would fit on a single DVD. But Bridge doesn't report an accurate total file size of selected files. What's up with that? Is that too much to ask out of Bridge?

but where is the "activity bar"? I don't see another total indicator of
selected files anywhere.
Well I think we are talking about something you already discovered but there
seems not an official name for it I believe, I call it the activity bar, it
might also be called a status bar or status monitor, can't find the official
name for it at this moment.
Anyway It is at the bottom of the Bridge window left side. Click on a folder
and it tells you the number of items showed and items hidden (and here it
should also say the total amount of folder size but as said before, a long
standing feature request). Click on one or more files and it shows the
amount of selected files and the total size of the selected files.
When first opening a folder in the content window Bridge needs to cache the
thumbs and depending on settings also thumbnails. When caching you see in
this bar a spinning arrow showing it is still caching and also the amount of
files to cache that are left.
A very useful item in my workflow

Norton reports high memory usage with firefox and it crashes often

Norton antivirus 2011 has pop up warnings reporting high memory usage from Firefox. I have been getting theem often and my computer is crashing often after those pop up warnings. Thanks

Safe mode did not help.
I have disabled ALL extensions and plug-ins, but the problem with "zig-zag" memory usage still remains (I've not tried to leave browser open for the night yet).
I think I'll do clean reinstall with completely new empty profile (without sync'ed information) to try this out. If this works, I'll start adding stuff (configuration, sync, features, etc) to see what causes the problem.

Ssrs 2008 r2 report dataset call a stored procedure

I am modifying an existing SSRS 2008 r2 report. In a dataset that already exists within the ssrs 2008 r2 report I need execute
a stored procedure called StudentData and pass 3 parameter values to the stored procedure. The stored procedure will then return 5 values that are now needed for the modified ssrs report. My problem is I do not know how to have the dataset call the stored procedure
with the 3 parameter values and pass back the 5 different unique data values that I am looking for.
The basic dataset is the following:
SELECT SchoolNumber,
        SchoolName,
        StudentNumber,
from [Trans].[dbo].[Student]
order by SchoolNumber,
          SchoolName,
          StudentNumber
I basically want to pass the 3 parameters of SchoolNumber, SchoolName, and StudentNumber to the
stored procedure called StudentData from the data I obtain from the [Trans].[dbo].[Student]. The 3 parameter values will be obtained from the sql listed above.
The columns that I need from the stored procedure called StudentData will return the following data columns
that I need for the report: StudnentName, StudentAddress, Studentbirthdate, StudentPhoneNumber, GuardianName.
Thus can you show me how to setup the sql to meet this requirement I have?

Hi wendy,
After testing the issue in my local environment, we can refer to the following steps to achieve your requirement:
Create three multiple parameters named SchoolNumber, SchoolName and StudentNumber in the report. Those available values from the basic dataset SchoolNumber, SchoolName and StudentNumber fields.
If you want to pass multiple values parameter to stored procedure, we should create a function as below to the database:
CREATE FUNCTION SplitParameterValues (@InputString NVARCHAR(max), @SplitChar VARCHAR(5))
RETURNS @ValuesList TABLE
param NVARCHAR(255)
AS
BEGIN
DECLARE @ListValue NVARCHAR(max)
SET @InputString = @InputString + @SplitChar
WHILE @InputString!= @SplitChar
BEGIN
SELECT @ListValue = SUBSTRING(@InputString , 1, (CHARINDEX(@SplitChar, @InputString)-1))
IF (CHARINDEX(@SplitChar, @InputString) + len(@SplitChar))>(LEN(@InputString))
BEGIN
SET @InputString=@SplitChar
END
ELSE
BEGIN
SELECT @InputString = SUBSTRING(@InputString, (CHARINDEX(@SplitChar, @InputString) + len(@SplitChar)) , LEN(@InputString)-(CHARINDEX(@SplitChar, @InputString)+ len(@SplitChar)-1) )
END
INSERT INTO @ValuesList VALUES( @ListValue)
END
RETURN
END
Use the query below to create a stored procedure, then use it to create a dataset to return 5 values:
create proc proc_test(@SchoolNumber nvarchar(50),@SchoolName nvarchar(50),@StudentNumber nvarchar(50))
as
begin
select StudnentName, StudentAddress, Studentbirthdate, StudentPhoneNumber, GuardianName
from table7 where SchoolNumber in (SELECT * FROM SplitParameterValues (@SchoolNumber,',')) and SchoolName in(SELECT * FROM SplitParameterValues (@SchoolName,',')) and StudentNumber in (SELECT * FROM SplitParameterValues (@StudentNumber,','))
end
Right-click the new dataset to modify the parameter value in the Parameters pane as below:
=join(Parameters!SchoolNumber.Value,",")
=join(Parameters!SchoolName.Value,",")
=join(Parameters!StudentNumber.Value,",")
For more details about pass multi-value to stored procedure, please see:
http://munishbansal.wordpress.com/2008/12/29/passing-multi-value-parameter-in-stored-procedure-ssrs-report/
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Compaitability of CR 2008 with reports created in CR XI

I need to use Crystal Reports 2008 for reporting , and im not sure if i install this liscense , will it support the existing reports created using CR XI ? Can any one advice me on this. Thanks.

Amy,
We do not change the file extension with each release.
We support opening the last 6 versions of CR with CR 2008. We also support that the prior 2 versions of CR can open RPT files created with CR 2008.
We know that you need to work with multiple versions at the same time, so we use this standard to make it easy.
I hope this helps.
Blair
Crystal Reports Product Management Team

Report In quota agreement

Hi,
Is there any standard report in Quota agreement.
Thanks,
Zafina

Hi,
Use t.code:MEQM Quota Arrangement for Material
For more check the link:
Source determination,Quota Arrangement Process
Regards,
Biju K

SSL Cert for 2008 R2 Reporting Services that is installed on a Failover Cluster - server address mismatch?

I utilized the idea from
http://www.mssqltips.com/sqlservertip/2778/how-to-add-reporting-services-to-an-existing-sql-server-clustered-instance/ to install 2008 R2 Reporting Services on a new Clustered SQL instance. In short, create the new Clustered SQL instance on Node1,
installing Reporting Services with it. Then on Node2, Add a Failover Cluster Node (without choosing Reporting Services); following that up with starting the SQL setup.exe with a cmd to bypass a check so that I can then install the Reporting Services
feature on Node2. It points out using the SQL Cluster Network name for connecting to Reporting Services.
I verified upon failover that I could still access the Reports and ReportServer URLs. However, when wanting to add an SSL certificate to the RS configuration, I run into the warning of "mismatched address - the security certificate presented by
this website was issued for a different website's address", where I can continue and get to the Reports or ReportManager URLs.
I played with different certs (internal CA created) and SANs and other things, but I still get this error with the cert. The Reports URL, for example, is <a href="https:///Reports">https://<SQLClusterNetworkName>/Reports, and the
cert has a CN and Friendly Name of SQLClusterNetworkName (with SAN of DNS: SQLClusterNetworkName.<domain>), but the error still happens.
What am I missing to eliminate the mismatched address warning when using the SQLClusterNetworkName as the base of the URLs?

I got it working by using the FQDN as the common name on the SSL cert, with FQDN in RS URLs.

Subcontract MRP Area with quota usage - urgent

We have a subcontractor supplying assembly X which in turn require us to supply component Y to the subcontractor. We have two vendor for supplying component Y to subcontractor. Scheduling agreement with component vendors are set up for direct delivery to subcontractor. Both the scheduling agreements are included in the source list with MRP indicator 2. Quota arrangement is set up for the component.
We have set subcontractor MRP area and assigned the same to component Y material master. Special procurement key 20 is assigned in subcontractor MRP area. Quota usage and source list are duly enabled. Quota usage indicator is 3 which provides for MRP, PR, schedule line etc.,
When we run MRP ffor component Y for subcontract MRP area, system is generating schedule line for but without update quota file. Further, the scheduling agreement picked up is not of the correct vendor as per Quota logic.
Does SAP support quota usage with subcontract MRP area. If not, is there a work around.
Shall appreciate urgent response

Dear Ravi,
you will get a seperate location product for your material. MRP areas in apo are represented by a seperate location (type 1007 = storage location mrp area). You can transfer your ecc mrp areas via cif (CFM1). The master data you maintain in mrp section of the material master in R/3 will be trasfered to that location product. Furthermore you can maintain it manually in apo MAT1 (location = name of your mrp area). That technique provides you the possibility to maintain different parameters for the plant and the mrp area.
Kind regards,
Christian

Error Report: No Data Usage Alerts for 250 MB Plan - June 2014

Hi, this post will report a data usage alert error for June 2014.
I previously signed up for data usage alerts when 50%, 75%, and 90% of my data is used. On June 10, at 11:00 PM, I discovered through my Verizon Wireless account that over 250 MB of data had already been used (my plan contains 250 MB). I did not receive any usage alerts prior to this time. I immediately upgraded to the 500 MB plan to avoid overage charges.
If the data usage alerts had worked properly, I would not have faced the upgrade fee or overage charges. Would it be possible to cancel the additional charges that arose this month because the data usage alerts did not work properly?
Thank you!
Hannah

Are you serious!!! Look at all of the calls on this matter in your records and fix it. I am sure at this point that it is another Verizon scam to solicite millions of dollars from it's customers only to have yet another class action lawsuit filed so the lawyers can get rich and the customers screwed.
AyaniB_VZW <[email protected]> wrote:
AyaniB_VZW created the discussion
"How to Stop False Data Usage Alerts?"
To view the discussion, visit: https://community.verizonwireless.com/message/1219549#1219549
>

How to make use of report - RPDLGA20 - Wagetype Usage report?

Hi,
Your replies will be highly appreciated.
I wanted to use report - PRDLGA20 ( Wagetype usage )
For suppose to check for the Wagetype which processing class has been set up etc,.
When I ran this report, and click on "Processing class and their values" , I do see list of classes & their specifications but I do not see any indication/mark against the specification defined against the selected Wagetypes. Like wise it is with other results as well.. ( Evaluation class, Cumulation etc.,)Do we need to activate this report by some means so that it will pull out the selected Wagetype configuration details in report rather than listing out whats there in SPRO?
Thanks for your reply.
Rgds
Peddi

Hi Raja,
1) Mention the fields that you wish from database table (incase you don't need all the fields from the database table).
2) Don't use the INTO CORRESPONDING FIELDS OF TABLE ztable clause.
3)Instead use INTO TABLE ztable (But take care that during the declaration of the ztable, the fields declared are in order that in database table to fetch the Records in sequence).
Please Find the Syntax and Code Below..
SELECT * FROM <TABLE>
WHERE <WHERE>
%_HINTS ORACLE 'INDEX("<TABLE>~<INDEX ID")'.
SELECT carrid
INTO TABLE t_spfli
FROM spfli
WHERE carrud IN s_carrid AND
connid IN s_connid
%_HINTS ORACLE 'INDEX("&SPFLI&" "SPFLI~XXX")'.
Hope this Is helpFul
Thanks
kalyan

Problems Using Crystal Reports 2008 sample reports in CR2008 Basic

I just downloaded Crystal Reports 2008 sample reports from
[Service Packs, Hot Fixes, Samples, and Utilities|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000714768&_SCENARIO=01100035870000000202&] to use them with CR2008 Basic. I have trouble using them . It tries to connect to to a website to download an xml file. Has anyone tried these sample reports in CR2008 Basic ?

From the portal you have mentioned, I had downloaded, "Crystal Reports 2008 sample reports - Demonstration" (demo_smpl.zip) which had three reports - Comparative Income Statement.rpt, Order Processing Efficiency Dashboard.rpt, World Sales Report.rpt.
These reports work fine for me.

Pass values between ssrs 2008 r2 reports

In a ssrs 2008 R2 report, I need to pass parameters to existing subreports that are currently called. Basically there is a main sssrs 2008 r2 report and there are 3 subreports. I would like subreports #1, subreport #2, and subreport #3 to receive
the value values of customer number and customer name. I am hoping you can tell me and/or show me code that would tell me how to add parameters parameter values that are used to call these subreports.

Hi wendy,
According to your description, it seems that you want to pass parameter values from main report to subreport1, from subreport1 to subreport2, and from subreport2 to subreport3. If in this scenario, you can refer to the following steps about the sample test
(from main report to subreport1) in my environment:
Create a parameter named ID in the main report, adjust the report body and tablix with the same size.
In the subreport1 report, right-click one cell to insert a subreport.
Right-click the subpeort to open the Subreport Properties, and select the main report name in the drop-down list.
In the left panel of the Subreport Properties dialog box, click Parameters.
Select ID in the drop-down list of Name, and select [ID] in the drop-down list of Value.
Considering your question, because I have create a parameter in the main report and specify the parameter in the subreport1, the main report will be passed by the parameter to subreport1.
If you have any other questions, please feel free to ask.
Thanks,
Katherine xiong
If you have any feedback on our support, please click here.
Katherine Xiong
TechNet Community Support

FSRM 2008 R2 reporting inaccurate quota usage amounts

Similar Messages

Maybe you are looking for