FSRM quota not showing correct usage

The quota management of FSRM doesn't show the correct quota details for drive C:
It's used just to monitor the diskspace so no quotas have been enabled.
Quota details shows limit 50 GB and and Available 18 GB
But Volume details shows capacity 50 GB and Available 6GB
On a non system drive the values are correct.
So I don't get the needed alerts.

Hi,
This is captured from a just formatted volume:
You can see the Available size shows that about 600MB is already used, while disk quota shows 269KB.
Disk quota check "used space" by checking file owner. If it do not have permission on specific folder, the used space will not be counted. For example, when we right click on "system volume information" folder, it shows 0 byte in using,
but actually there are many files inside including shadow copy files.
As the purpose is to monitor volume usage, you can set the limit to "capacity - used space" - It is not a solution but as we cannot show all used space, it could be a quick workaround.
If you have any feedback on our support, please send to [email protected]

Similar Messages

MSI P67A-C45 OC settings not showing correctly in windows.

I have a MSI P67A-C45 and been playing about with overclocking. When I overclock it all shows fine in the bios but when I boot into windows, it does not show everything correctly.
I have used CPU-Z, CPUID HWMonitor and the most uptodate msi controlcenter 2. It seems to show the voltages almost correct but the CPU frequency is not the same. See the 2 pictures. One with my bios settings and another of the programs I used in windows.
If I use OC genie is show up all correct, just not if I do it manually. Turned off EIST and most power saving but still the same.
Just another thing, the bios is a bit buggy to. The mouse seems to have a fit and select when I don't want it to or the wrong option. This is while I scroll down on the menu.
My bios with OC settings
In windows. Not showing correctly.

Quote from: coremaster on 21-January-11, 07:19:08
I have a MSI P67A-C45 and been playing about with overclocking. When I overclock it all shows fine in the bios but when I boot into windows, it does not show everything correctly.
I have used CPU-Z, CPUID HWMonitor and the most uptodate msi controlcenter 2. It seems to show the voltages almost correct but the CPU frequency is not the same. See the 2 pictures. One with my bios settings and another of the programs I used in windows.
If I use OC genie is show up all correct, just not if I do it manually. Turned off EIST and most power saving but still the same.
Just another thing, the bios is a bit buggy to. The mouse seems to have a fit and select when I don't want it to or the wrong option. This is while I scroll down on the menu.
My bios with OC settings
In windows. Not showing correctly.
I'm having the same issue here, bios 1.5
With EIST disabled, I can get into windows at 4.5GHZ on a i5 2500K
With it enabled, I cant get anywhere beyond 4ghz
I'm going to run some tests now to check, but with EIST disabled, doesn't matter the clock I set on bios, the clock on window will show up always as the default clock speed

FSRM Quotas not going down after shadow copy snapshot

I've got an issue with FSRM Quotas not being recalculated when a user removes some data from their home drive.
Server is 2008R2 Standard. Clients are a mix of Windows 7, 8, and 8.1 it seems to happen irrespective of the client being used.
if a user removes data after a shadow copy has been created the available space doesn't go down.
if a user removes data before a shadow copy has been created the free space goes up as expected.
I have Enabled this policy as I thought it might be related to the Recycle bin but that makes no difference: Windows Components/File Explorer Do not move deleted files to the Recycle Bin = Enabled.
this is starting to become an issue as now users cant clear space themselves and we have to up their quota should they run out of Space. Even if the administrator deletes the files directly
on the file server the quota is not recalculated.

Hi there Shaon
the server is a 2008R2 server that hosts our Domain users (students and teachers) home drives. they are split up by years in the example above the home drives fall into 2012\%username% a quota template is used to apply quotas to the home drives. Shadowcopies
is enabled on the Drive (d:) in my case we have 2 copies created a day so we get about 30 Days of history that people can look back on which is really useful if they delete something - saves trawling through DPM :)
So what can happen: say I'm student test12 and I log into a computer and copy 100MB of photos onto my home drive the free space goes down as expected via the quota - if they had a 700MB quota their home (h:) drive Which was empty to begin with it would show
600 MB free. if they then remove the files immediately the free space goes back showing 700MB Free.
However if the Student doesn't delete the files and after lunch (after a shadow copy snapshot has taken place) logs back in and then deletes the files the free space doesn't change it will continue to show 600MB Free despite there being no files on their
h: drive.

Not showing correct output when parsing the date

//WAP the gives the details of employees
import java.io.*;
import java.util.*;
import java.text.Format;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
class employee
private String nm,curr_dt;
private Date dob,doj;
private int salary;
           employee()
              nm="\0";
              dob=null;
              doj=null;
              curr_dt=null;
              salary=0;
           void getdata()throws IOException
              String dt;
              BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
              //we can create date with these 3 type of objects
              Format fm=new SimpleDateFormat("dd-mm-yyyy");
              DateFormat df=new SimpleDateFormat("dd-mm-yyyy");
   //object of base class are type compatible with the object of derived class
              SimpleDateFormat sdf=new SimpleDateFormat("dd-mm-yyyy");
              System.out.print("\nEnter the name of Employee : ");
              nm=br.readLine();
              try{
              System.out.print("\nEnter the date of birth of Employee : ");
              dt=br.readLine();
              dob=(Date)fm.parseObject(dt);
              System.out.print("\nEnter the date of joining of Employee : ");
              dt=br.readLine();
              doj=df.parse(dt);
              }catch(ParseException e){
              Date d=new Date();
              curr_dt=sdf.format(d);
              System.out.print("\nEnter the salary of employee : ");
              salary=Integer.parseInt(br.readLine());
           void putdata()
              System.out.println("\n\n\nEmployee Name : "+nm);
              System.out.println("\nDate of birth : "+dob);
              System.out.println("\nDate of joining : "+doj);
              System.out.println("\nCurrent date : "+curr_dt);
              /*if((doj-curr_dt)>1)
                   salary+=3000;
              System.out.println("\nSalary of Employee : "+salary);
class emp
public static void main(String str[])throws IOException
       employee emp[]=new employee[1];
       System.out.println("\nEnter the detail of employees \n\n");
       for(int i=0;i<1;i++)
            emp=new employee();
emp[i].getdata();
System.out.println("\n\nDetail of employees are\n\n");
for(int i=0;i<1;i++)
emp[i].putdata();
}*Output:*
Enter the detail of employees
Enter the name of Employee : Rajendra Sharma
Enter the date of birth of Employee : 10-10-1979
Enter the date of joining of Employee : 05-09-2004
Enter the salary of employee : 2000
*it is not showing date in the "dd-mm-yyyy" format and not showing correct month as well*
Detail of employees are
Employee Name : Rajendra Sharma
Date of birth : Wed Jan 10 00:10:00 IST 1979
Date of joining : Mon Jan 05 00:09:00 IST 2004
Current date : 17-08-2008
Salary of Employee : 2000

Hi,
Use below code that will help u to sort ur problem.
import java.io.*;
import java.util.*;
import java.text.Format;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
class employee
private String nm,curr_dt;
private Date dob,doj;
private int salary;
private String dobb,dojj;
employee()
nm="\0";
dob=null;
doj=null;
curr_dt=null;
salary=0;
void getdata()throws IOException
String dt;
BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
//we can create date with these 3 type of objects
DateFormat fm=new SimpleDateFormat("dd-mm-yyyy");
DateFormat df=new SimpleDateFormat("dd-mm-yyyy");
//object of base class are type compatible with the object of derived class
SimpleDateFormat sdf=new SimpleDateFormat("dd-mm-yyyy");
System.out.print("\nEnter the name of Employee : ");
nm=br.readLine();
try{
System.out.print("\nEnter the date of birth of Employee : ");
dt=br.readLine();
dob=(Date)fm.parseObject(dt);
dobb= fm.format(dob);
System.out.print("\nEnter the date of joining of Employee : ");
dt=br.readLine();
doj=df.parse(dt);
dojj = df.format(doj);
}catch(ParseException e){
Date d=new Date();
curr_dt=sdf.format(d);
System.out.print("\nEnter the salary of employee : ");
salary=Integer.parseInt(br.readLine());
void putdata()
System.out.println("\n\n\nEmployee Name : "+nm);
System.out.println("\nDate of birth : "+dobb);
System.out.println("\nDate of joining : "+dojj);
System.out.println("\nCurrent date : "+curr_dt);
/*if((doj-curr_dt)>1)
salary+=3000;
System.out.println("\nSalary of Employee : "+salary);
class emp
public static void main(String str[])throws IOException
employee emp[]=new employee[1];
System.out.println("\nEnter the detail of employees \n\n");
for(int i=0;i<1;i++)
emp=new employee();
emp[i].getdata();
System.out.println("\n\nDetail of employees are\n\n");
for(int i=0;i<1;i++)
emp[i].putdata();
thanks,
prabhu selvakumar.

SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

Hi
I keep seeing this issue albeit intermittently. I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc) . They all appear perfectly most of the time except the lookup column. Sometimes is just
decides to display the title field of the current library and not the lookup list title . It is weird as it has been working perfectly for ages given the library is populated with valid documents.
There are some fixes listed here. Has anyone got any experience of this?
https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
Freelance consultant

Hi,
According to your post, my understanding is that the lookup column not display well while editing in word.
Did you customize the Document Information Panel?
I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
Or you can also use the methods in the post you have pasted to check whether it works.
As the limitation of the environment, we could not reproduce the issue in our environment.
I would suggest you open a case to Microsoft Customer Service via Phone.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

The web site of Adobe does not show correctly in FireFox

I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?

Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris

Characters codes are not showing correctly in my wesbite. I use other browser it works but her ein mozilla its not. Please help

This is my site http://globaledsource.com/ then the characters is not showing correctly. This is what happen in my site http://globaledsource.com/wp-content/uploads/2013/03/MAS_ThemeProbleme-1024x1024.jpg

Hi paulique, the simplest next test would be to disable all plugins and extensions (except Shockwave Flash, which is pretty much indispensable) here, restart Firefox, and see whether your font works without them:
orange Firefox button (or Tools menu) > Add-ons > Plugins category<br>
orange Firefox button (or Tools menu) > Add-ons > Extensions category

Spot colors not showing correctly in acrobat 11

Spot colors not showing correctly in the output preview as well as the page correctly. I have a spot pms
295 on a page in a few different areas of text and backgrounds. The spot color shows on 1 of my backgrounds
and text and a spot color on another background does not. These items are on the same page. Although I
can use the eyedropper to check the color of these items and it states the spot color is present. The page
also prints correctly. Previews not happening.

I included 3 screen shots from Acobat 11 of the test requested. Also, included the last screen shot from Acobat 9 of same file.
Which shows correct preview. To eliminate possible ICC profile issue. I did change profiles to all that were in the profile list
with no change in either test.

Photo events do not show correctly in my iPhone

Photo events do not show correctly in my iPhone. I have 21 events in my iPhoto but they appear in many different groups in my iPhone.

Mine too. Anyone have a clue how to fix this?

Few of the text in Tibetan language subtitle is not showing correctly

Dear frds, I am working on 2 hours project which consist of 3 language i.e. English, Russian and Tibetan. Both English and Russian is showing correct while importing in Encore DVD 2 but few of the text which is in Tibetan Subtitle is not showing correctly. I have choosen the font correctly still few of the text is not correct format.
Is there any way to correct my Tibetan language text either by disabling speeling or grammer check or something else ???
Or is there any other way to import the subtitle is Picture format ???
Will be thankful for your kiind help. I stuck my project, please help me...

did you get a solution to this?
We had Encore cs3 and that didn't handle Tibetan well.
Did you use Encore Cs6 to get Tibetan to work ?

Account Balance not showing correctly

Sir,
Suppose , i have posted an invoice of Rs.200 against a customer and after some times i recieved payment from this customer of Rs.200 So, accout balance of this customer should be zero.. But when i see the account balance from business partner master data , it should me Rs.-400 in accout balance field but when i navigate through orange arrow in to accoutn balance details , there i get zero in balance due field?? ie. it is showing coorectly in details of account ballance but in the business partner master data it is not showing correctly??

hi divya,
Check SAP Note 904002 - Customer account balance is displayed with negative sign
Summary
Symptom
Customer Balance is displayed with minus.
Other terms
Customer balance, Supplier Balance, Credit Balance, Debit Balance, Display Credit Balance with Negative Sign, Company Details, System Initialisation, business partner, accounts, SAP Business One
Reason and Prerequisites
Customer balance is displayed in negative though you expect it to be positive.
Solution
Under Administration->System Initialisation->Company Details and the 'Basic Initialisation' tab you will find the setting 'Display Credit Balance with Negative Sign'. This setting decides how Customer and Supplier balances will be displayed.
NOTE!
When creating a company it is important to know that this setting is irreversible once transactions have been made in the company.
When this box IS checked the following applies:
Customer balances will be displayed as Positive.
Supplier balances will be displayed as Negative.
When this box IS NOT checked the following applies:
Customer balances will be displayed as Negative.
Supplier balances will be displayed as Positive.
This setting also influences the entry of opening balances for the G/L accounts. Depending on this setting, the opening balances must be entered as positive or negative numbers.
By default this box is checked when a new company is created.
Header Data
Release Status: Released for Customer
Released on: 02.12.2005 10:42:10
Master Language: English
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SBO-ADM-INI-DET Company Details
Secondary Components: SBO-BP Business Partners
Affected Releases
Release-Independent
Hope it solves problem.
Jeyakanthan

Fonts not showing correctly only when on my account page on app store

fonts not showing correctly only when on my account page on app store

Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

Not showing Texhnical Usage in MOPZ

Dear Guru's,
I am going to install NW 2004s EHp1 in my existing PI 7.0 system.
It is not showing Texhnical Usage while i created maintance transaction in MOPZ.
Whereas it is showing for my ERP systems(ECC 6.0).
Please let me know,why it is not showing "Technical Usage" in Soultion Manager 7.0 EHp1.
Please suggest how i can procesed.
Thanks & Regrads,
Venkat

Hello there,
The upgrade to Netweaver 7 EHP1 is not supported by Maintenance Optimizer.
Please check http://service.sap.com/solman-mopz for a list of the supported upgrade paths.
Best regards,
Miguel Ariñ

The onhand quantity at sub inventory level it is not showing correctly

For an item the org level quantityt is showing correctly but at sub inventory level it is not showing correctly.
1)For an item org level the avilablty as below :
               On Hand / Avail to Reserve / Avail to Transact are
     oRG level          7     7          7
STAGING           7     7          7
     STORES          0     0          0
2) Created an Sales order with quantity 5 ,then STAGING decreased by 5 which is correct.
          the avilablty as below :
               On Hand / Avail to Reserve / Avail to Transact are
     oRG level          7     7          7
STAGING           2     2          2
     STORES          0     0          0
3) Shipping Transaction not completed,Received 4 into Stores – Staging avail increased by 6 and even STORES also increased by 4 . Here we do not understand why STAGING increased to 6.
     the avilablty as below :
               On Hand / Avail to Reserve / Avail to Transact are
     oRG level          7     7          7
STAGING           6     6          6
     STORES          4     4          4
4)Ship Transaction Completed sucessfully now the values are showing correctly.
     The avilablty as below :
               On Hand / Avail to Reserve / Avail to Transact are
     oRG level          7     7          7
STAGING           2     2          2
     STORES          4     4          4

Hi Patel,
You can create a confirmations using CO11N for sub-operations, but you can only confirm hours, not yield quantity. The yield quantity requried to be confirmed in the operation. You can partially or fully confirm sub-operations.
Enter the order number, sub -operation number all the related data will be displayed execpt greyed quantity fields.
Can you see the "sub-operation" entry field below "oper./activity" in CO11N ?
Thanks & Regards,
Ramagiri

Finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.

finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.

This problem occurs after I move a file or files to trash. If I remove one file, then the sequence is one file off, if I move two files to trash then the sequence istwo file off. For example, if I delete file 1 and highlight (click on) file 3, then the cover flow panel shows file 2, when it should show file 3.

FSRM quota not showing correct usage

Similar Messages

Maybe you are looking for