FSV not assigned accounts in Report Painter

Hi
I created one report through Report painter for Balance display.
After Execution of the report in Drilldown many Balance sheet G/Ls are showing as not assigned in the report.
As they are assigned in the Financial statement version.The G/Ls not assigned are the Balance Sheet G/L.
Thanks

Hi,
Can you please check the financial statement version which might have been included in the general data section of the report or the column characteristics. Also check the row element/ cell element defination.
Regards,
Gaurav

Similar Messages

  • Not assigned account in FSV

    HI, Expert
    I have run F.01 for Balance sheet , when i drill down it show not assign account like first i click on gl account  then company code then it shows not assigned ,can any one explan me how it shows
    Regards
    gk

    it not shown in lower level of the FSV , i already checked it assigned in proper place but when i drill down it shows not assigned
    I am really confused, you said it is not shown in FSV and again it assigned in proper place. Can you please give me some example for your issue.
    Regards,
    Ravi

  • How to create Profit and loss account using report painter

    Dear All,
    Can some one guide me as to how to create Profit and loss account using report painter.
    If some one can share the document having steps to be done,would be of great help.
    Thanks in advance.
    Regards,
    Gokul

    Hi,
    Could you please re-phrase your question? As the report painter is a reporting tool I assume you want to report on P&L accounts and not u201Ccreateu201D them. A few more details on what you intend to report would be useful.
    Regards
    Karl

  • GL Accounts in Report painter reports

    Dear Experts,
    I have a requirement to find out the GL account in report painter reports.
    Client is having a number of reports and he wants to find out the GL acu2019s involved in that reports. Is there any way we can find out.

    Hello,
    Do you mean that this G/L is 'hardcoded' in the report? In this case, there is no standrad way to find it.
    Regards,
    Eli

  • Combination of cost center and GL account in Report painter report

    Hi Guys,
    Im creating a report for  profit centers using library 0FL- which uses table FAGLFLEXT in the report painter GRR2.I need to enter cost center with gl accounts in the characteristics.as these cost centers
    are assigned with cost elements.Can I do that ? cuz when I enter combination of gl a/c and cost center,I wobn't get nay data but only gl accounts shows the correct data.How to use combination of cost center and gl a/c, or I am good only with gl a/cs.Please suggest.
    Regards
    Shaun

    Hi
    Just check the G/L account assigned in the PO against the cost center, The G/L account assigned may not be the correct one, Check out if any validation is there for the combination, contact your FI-CO guy as there are always restrictions unknown to a MM guy.
    Regards

  • Drill down value not matching with Displayed Report Painter Issue-GR55

    Hi,
    Need your help for an issue in drill down value of report painter from actual cost coloumn.
    I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
    Could you suggest on this issue.
    Thank you for your cooperation.
    Regards,
    Rakesh

    The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

  • Section not visible in the report painter

    Hi Gurus,
    I created a report painter report for showing the P&L statement for a company code. I had to added a new section for calculating the statistical key figures. I was able to display the 2 sections initially, but later after changing some layout the keyfigures section is not visible anymore.
    Please let me know how can I retrieve the Key figures section.
    Thanks

    Hi Christian,
    And if you execute the report you don't see the second section?
    Yes, I am able to see the section in the edit mode and not when execute the report.
    In the report layout "formatting / report layout" in the area "rows / treatment of zero rows" are the rows hidden if the value is zero?
    The standard section layout has zero rows hidden. I tried changing it to print zero rows, but that didn't help.
    Maybe you have a selection where you only have zero values in this section so it does not appear?
    I was able to see the section in execute mode once, but then I tried to change the layout which caused me this problem. Please let me know if you have any other inputs.

  • Some GL A/C's are showing in B/S under Not-Assigned Accounts

    I am facing one issue regarding Financial statement/Balance Sheet GL accounts updation.
    100177-Inventory Repairs & 200402-Distribution GL accounts(Both are Balance Sheet items) are assigned In Financial Statement Version But they are not updating in the B/S Under Respective Heads.They are showing under Un-assigned Accounts.Plz help me that how can i bring this GL acocunt to under Respective Heads...
    It would be a great help for me...plz spend some time on this issue...
    Regards
    Sap Guru

    Hi,
    U have to assign the accts in fse2 to appear in balancesheet or p&l . In it the acct can be assigned only once for dr & cr . It is showing unassigned means it is not assigned there. Go to fse2 assign the accts. tick dr and cr tick box.
    Assign points if solved problem

  • Get Error After Add GL Account In Report Painter

    Dear All,
    I had add GL code into 2 reports (Cash Flow - Income Statement and Cash Flow - IPC Income Statement) but when I want to execute those reports in the report tree, it come out an error "In element OTHER EXP Jan the system adds quantities and values or different currencies."
    May I know how to solve this problem?
    Hope will get reply soon, rewards point will be given
    [Financial Statement Version|http://www.picoodle.com/view.php?img=/4/4/7/f_FSE2m_f881d78.jpg&srv=img32]
    [Report Painter|http://www.picoodle.com/view.php?img=/4/4/7/f_reportPaintm_0d1dd9a.jpg&srv=img29]
    [Error Message|http://www.picoodle.com/view.php?img=/4/4/7/f_msgLongm_d25d1db.jpg&srv=img30]

    Solved. TQ

  • Let user assign header for Report Painter Report

    Hi all,
    I would like to let the user assign the header while generate the report.
    (Because the report is somewhat dynamic)
    Here the details of my requirement:
    1) Let the user input the header text in the selection screen of the report
    2) Display the inputted text as the header ( Which setup at GRR2 via Extras > Rport Texts -> Headers)
    Or any possible dynamic method will be welcome.
    Tried to define a variable for this, but unused variable will not show up for selection when setup header
    Regards
    Bill

    Bill --
    are you writing an ALV report ?
    if yes, you try something like this--
    START-OF-SELECTION.
      PERFORM SET_TITLE USING TITLE. 
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
    *      I_INTERFACE_CHECK = 'X'
            i_callback_program      = gd_repid
    *      i_callback_top_of_page  = 'TOP-OF-PAGE'
    **      i_callback_user_command = 'USER_COMMAND_ALV'
    **       I_CALLBACK_PF_STATUS_SET = 'ZSTATUS_MUSTER'
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
            IS_LAYOUT                = GD_LAYOUT
            is_variant              = g_variant
             I_GRID_TITLE           = TITLE " Gives the Title to the ALV report.
          TABLES
            t_outtab                = IT_MUSTER
          EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
    FORM SET_TITLE USING TITLE.
    TITLE = <YOUR TITLE ON SELECTION SCREEN>
    ENDFORM.                    " SET_TITLE
    Regards,
    Sumit

  • 'Not Assigned ' value in Report

    Hi,
    I have my Admin Cockpit report which shows # values for TIMESTAM values. The timestamp are for Last load, last Aggregation, Last Compresstion of the cubes.
    the Data flows from Virtual Cube> MultiProvider > Query.
    I can see that the relevant data is available in Virtual cube, but the Multiprovider is showing values to ZERO.
    Multiprovider shows appropriate Timestamps for DSOs but not cubes.
    In query the result rows are 'Always' Suppressed.
    Please let me know that at which stage the data is missing. Since it has Virtual Cube it extracts data Run time, how to remove this # values then.

    Hi Pranil,
    It's nice you solved your own problem.
    I request to close this thread by clicking answered link. So, that others can get a chance.
    PS: When ever you create a multiprovider the identification of the Keyfigures and Char's is mandatory. If you didn't maintain this then you won't get data or you will get wrong data.
    Thanks & Regards,
    Ravi Kanth

  • "not assign" problem in report for attributes

    I have a problem to display attributes in report, both navagational and attribute-only attributes. I checked the Char, which is assigned attributes and attributes' text table and master table. All records are right. I don't know what's problem and how to check where is the problem?
    Thanks!!!

    You have added this new attributes to an infoobject, add filled with all your data. but you need to activate the master data for this infoobject!
    You do this in the RSA1 selecting the infoobject and click with the right bottom and select the activate master data.
    After that yoor data is available for working with it.
    If i helped you don´t forget the yellow star...
    Grettings,
    António

  • Assign a New Report Painter Layout to a Transactions

    Dear all.
        I have created a New Layout ZPT-ACTIV-01 by copy the Layout 0PT-ACTIV-01.
        I need to created a new transaction. I Copy the transaction S_ALR_87012258 to ZS_ALR_87012258. Because a create a new Layout ZPT-ACTIV-01 e need to change the Default Value
    D_SREPOVARI-EXTDREPORT = FBR 01RFRRS02 ZPT-ACTIV-01                .
    But When i'm saving the transaction the following erro message appears "Do not use blank characters"
    Best Regards
    Thanks In Advanced
    Pedro Miguel Rodrigues

    No, i don't have any aditional Space.
    But, i think that this problem is only occurs in my SAP Version ECC 5.0.
    Best Regards
    Thanks in advanced
    Pedro Miguel Rodrigues
    This problem was solved by implementing the OSS Note 871039
    Message was edited by: Pedro Rodrigues

  • Hierarchy showing not assigned in Bex report

    Hi all,
    I created an hierarchy on an infoobject, I included this infobject in a cube without populating the hierarchy infoobject in the cube (as I only need it for selection in the variable screen).
    However the hierarchy is showing unassigned without relevant nodes; all the nodes are active in the H table.
    how can I get the hierarchy to show in the variable screen or report?
    please any suggestions on this?
    Many thanks

    Hi,
    In the Query Designer, you can restrict characteristics by hierarchy or by hierarchy node, on a fixed or variable basis.
    Hope below link helps you.
    http://help.sap.com/saphelp_nw04s/helpdata/en/83/096d399bd2046fe10000000a114084/frameset.htm
    Regards,
    Vinay

  • FSV item(GL) not appearing in drilldown mode of report painter

    Hi,
    Actually i have added GL account of Cash on hand in FSV of the client and have assigned the same in the balance sheet report in report painter.
    However i am not able to see the line items of the Cash on hand GL which i have assigned in the report painter.
    Also the report painter is picking up the values from the Cash on hand GL but is not showing me the line items of that particular GL.
    What can be the reason?
    Parin

    Hi,
    One question.... Is this a Select List or a Popup LOV?
    The settings to check are:
    Source Used: Always,....
    Source Type: Database Column
    Source value or expression: The field name the table
    The List of Values section should also contain valid settings - You should either have a Named LOV selected or specified a select statement in the List of values definition setting.
    You should also check to see if there is any Default value or a Post Calculation Computation that may be clearing the field.
    Andy

Maybe you are looking for