FSV-Using Report Painter

Dear Experts ,
I am creating Financial Statement Version Using Report Painter
We can generate FSV with F.01 it gives: Reporting Period , Comparison period and Absolute difference columns.
the same way client want Period wise Balances report (period1 ,period2.........,period12).
I have created report using form Type FAGLFLEXT and i have defined own Columns and Rows .
Issue is :we have FSV Nodes like below
          SOURCES OF FUNDS:
         APPLICATION OF FUNDS:
         PROFIT AND LOSS ACCOUNT:
         TAXATION:
        APPROPRIATION:
        Calculated profit/loss
        NOT ASSIGNED:
         NOTES ON ACCOUNTS:
I have created Rows for each node wise and Columns Period wise,when i execute report column wise each period values are fetching but when it comes to Rows only 1st row (Sources of Funds)fetching the values remaining showing blank .
in another way i can say that only 1st row is fetching values(in 1st row it can be any node) remaining are blanks.
what is the reason for this ? is there any other way to get FSV report using Report Painter ?
Please provide your valuable suggestions.
Regards,
Sada Bandla

Hi,
Just go through the given link. It may help you.
http://scn.sap.com/community/erp/financials/blog/2012/05/03/financial-statement-analysis-using-report-painter
Regards,
-Yogesh

Similar Messages

  • Creation of report using Report Painter

    Dear All,
    I have a requirement to create a report using Report Painter. I don't have any idea about this.
    Could you pls provide me some study materials or Links to study Materials, it could of great help.
    Regards
    Ranjan

    report painter
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    <b>reward points if helpful</b>
    Message was edited by: Rahul Kavuri
    Message was edited by: Rahul Kavuri

  • Profit center trail balance report using report painter

    HI Experts,
    Please let me know steps to write functional specs for creating profit center trail balancing using report painter and also steps to create profit center trail balance using report painter.
    Thnaks,
    Vani

    Hi ,
    If that kind of report is not available in sap standard then write functional specification with relavant technical field name and table name with the required logic .Give that functional spec to  abapers they will write the technical specification and they will create the required report.
    Thanks & Regards
       pavan

  • Can you create report using report painter with Tcodes:FAGLL03,FCHN

    Hi Experts,
    1.I want to create report using report painter by using tcodes FAGLL03,FCHN.Can i create with report painter?
    2.i never used report painter can anyone provide report painter pdf for ecc6.0
    3.can any oneguide me how to develop report in report painter by using this tcodes.
    4.If not possible can i do with report writer?
    Regards,
    naresh.
    Moderator: Don't mix report painter with the TCodes wyou mentioned; there is no link between them. Regarding Report Painter - search SDN. Respect the rules and don't cross-post: you asked the same unclear question in several forums!

    cross posted
    Edited by: nareshvarma on Jul 19, 2010 9:11 AM

  • Read Purchase data using Report painter with CCSS structure

    Hi
    I'm triying to set-up a simple Budget by material procedure using Rosurces defined as material and KP06 to plan Qty and Values.
    All works fine.
    Later I need to write a report for Compare Planned vaues and Effective values at material (resource) level.
    Unfortunately resource can be used only for planning, so none Effective values is available in CO.
    I thought to write a Report using Report painter and library 1VK (CCSS structure) for planned values and import from a LIS table the effective values (Ordered, Invoiced) directly from Puirchasing environment.
    Is it possible by using exit or other tools, import LIS data into a CO Report painter program ???
    Thanks in advanec for your help.
    Claudio

    Hi
    I try to specify better my need.
    I've defined using report painter a  Z report using Report Painter.
    Inside teh new Report, I can use a Customer key-figure which does'nt exist in the CCSS structure.
    Is there any solution to Read data from other SAP tables and use these info into the report.
    I'm not very frioendly with Set, Key-figures and variables, and I'd like to undestand if my needs can be solved using Report-painter.
    Thanks for your help.
    Claudio

  • Regarding reports using Report Painter

    Hi gurus,
              I am new for this reports. I have to create a report for HU's with material number,handling unit number, description and status. I am trying create this report using report painter. I have gone through forums on how to create a report. But there is no standard reporting table for this HU's. To create a report libraries are needed but these are linked to reporting tables. So can any one explain me how to create a reporting table and also report.
            Let me know if I am not clear about anything.
    Thanks in advance.
    Ravi Boppana

    Hi,
    You can use this link, it describes pretty fair the procedure:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/d1/44f2b5c7f411d296080000e82de14a/frameset.htm
    Generally, the technique is the same as for other SQL tools.
    Regards,
    Eli

  • How to create Profit and loss account using report painter

    Dear All,
    Can some one guide me as to how to create Profit and loss account using report painter.
    If some one can share the document having steps to be done,would be of great help.
    Thanks in advance.
    Regards,
    Gokul

    Hi,
    Could you please re-phrase your question? As the report painter is a reporting tool I assume you want to report on P&L accounts and not u201Ccreateu201D them. A few more details on what you intend to report would be useful.
    Regards
    Karl

  • Functional Area Reporting using Report Painter/Report Writer

    Hi,
    Could anyone let me know how we can draw up report for a company with functional areas using Report Painter/Report Writer?
    Our client wants to draw Financial Statements on the basis of Functional Area.
    Thanks & Regards,
    Sajan  C P

    <a href="http://help.sap.com/saphelp_47x200/helpdata/en/5f/b77625a0f811d39755006094b969cf/content.htm">Creating a Profit and Loss Statement with Cost of Sales Accounting</a>
    FSI4 for creating forms and FSI1 for creating assocaited reports.
    Standard report 0SAPPRALO-01 Annual Profit and Loss Statement by functional area, can be checked, under FSI3 Type 005.

  • Need opinion on SE38 changing reports developed using report painter

    Hi all,
    I need opinion on whether the report produced using report painter and se38.
    Can i use se38 to modify a report which was produced by report painter?
    Thanks
    William Yau

    Hi,
    You can change it thru SE38, but doesn't serve the purpose,
    if it's regenerated dynamically your code will be over-written &
    there's lot of overhead in change thru SE38.
    Regards,
    Raghavendra

  • Cash flow direct method report is generating by using report painter

    Dear all
    i am preparing cash flow statement direct method report by using  standard t.code s_alr_87012271
    in this report i am maintain values by using T.code FSI5 in report painter form name 0SAPRATIO-04
    there i am maintain GL accounts codes which cells are not having formula
    for example second  row item Increase in down payments received it contain the formula Z004-z003
    and third row character Increase in receivbls frm gds & services it contain the formula z007-z006
    where can i maintain formula components and how to create and  link the GL Accounts.
    please guide me.
    Thanking you
    Kranthi

    Hi Victor,
            Cash Flow S_ALR_87012271 is the std cash flow where you have to assign gl. After excuting report. Click on form and assign gl to FORM :-  0SAPRATIO-04 Cash flow (direct).
       But it's std format so you will not get the report of cash flow which will show the total inflows and outflows in the bank account as per comapny scenario. For this   u have to take ABAP person help to create cash as per comapny requirement.
    Nikhil

  • Error in starting transaction using report painter

    Hi,
    We have a problem when starting a z-transaction:
    Transaction: START_REPORT
    D_SREPOVARI-REPORTTYPE = RE
    D_SREPOVARI-EXTDREPORT = FBR 01RFRRS02                       ZDE-PL01
    The error message says there's a problem in the generated report GPCDBE7ZKBGDJXRP5IAE2BOUBDM
    When I go to se38 and click on syntax chec, the result is this:
              IF RFRRS02-ERGSL EQ '88' "
              AND RFRRS02-GJAHR EQ VAR001 AND
               VAR001"
              AND RFRRS02-VERSN EQ 'EKDE'.
                CLEAR: Z. SP = C00001.
    Looks to me like the " is not properly placed.
    Maybe it should look like this:
              IF RFRRS02-ERGSL EQ '88'
    "AND RFRRS02-GJAHR EQ VAR001 AND VAR001"
              AND RFRRS02-VERSN EQ 'EKDE'.
                CLEAR: Z. SP = C00001.
    Then it would be okay.
    Or something is missing here. Is there something wrong in the report painter report definition ?
    Any hints ?
    Thank you
    Edited by: Joachim Nerreter on Feb 17, 2012 12:48 PM

    You can get the details from SREPOVARI table.
    Give report type as RE ( drilldown reporting ) and extended name as your fbr* and execute.
    You can find the tree and based on tree the program.
    You can find the report painter program from GRR3 transaction.
    Regards,
    Vijay V

  • FI report using 'Report painter'

    Hi All,
    I am working on trial balance and created the BADI 'G_SET_FORMULA_EXIT' with the filter 'U001' saved and activated. I am now trying to create the variable with FORMULA '#U001' but i getting the following error:
    Variable name '#U001' not possible, please check syntax
    Message no. GS740
    I am not sure what part i am missing. Can anyone please help me out with this? Any docs/Link are appreciated.
    Thanks,
    Karun

    Hi Ajeesh,
    Thank you for your quick reply. With your reply i made some progress. I am able to put a break point and debug the BADI. I want the BADI to trigger after the selection screen. But right now it is triggering even before the selection-screen shows up.
    This is what i am doing.
    1. In the trial balance, we have a single row to show all the accounts. I created a VAR for ACCOUNT#(GLFUNCT-RAACT) and called this VAR in the single row if the trail balance using GRR2.
    2. The BADI is triggering before selection screen. I reason i gave at the ROW is i want to calculate the 'CUMMULATIVE BAL' for every account. 
    3. But in the debug mode i do no see anything as it is triggering before the selection.
    Could anyone please let me know how should i call the BADI so it triggers for every account that is displayed the report?
    Thanks in advance,
    Karuna

  • P & L Report using Report Painter does not run in PRD client ( time out)

    Hi SAP Gurus
    We created a P & L Statement on the basis of GLPCT table. We incorporated Accounts groups from a financial statemen version using KE5B in profit center accounting.
    Report contains Account groups as well as profit centre group.
    It takes around 5- 10 minutes to run in DEV client but in PRD it takes a lot of time and times out after a while.
    Any suggestions....??
    Regards
    Satish

    Hi Satish,
    Use all the Index fields(Profit-center-based index) which are active for the table GLPCT in the Selection screen of the report and use maximum selection criteria.The processing time will improve to some extent.
    ~Andrew
    Good you got the solution from the Basis Team, probably they might have increased the processing time limit of the report.But to increase the efficiency of the program the above will work.
    Edited by: Andrew J on Jan 24, 2011 4:53 PM
    One more tip for tuning the performance

  • Report Painter using user exit U002 to create a formel variable for FI-SL

    Hi,
    I would like to use Report painter creating a formel variable with U002(VAR1,VAR2) for FI-SL and did following:
    1. go to TCode: GS11
    2. Formel: selecting U002 from Formel-Exit list and giving var1 and var2
          '#U002(VAR1, VAR2)'
    3. Save
    4. Erro message: U002 is not definiert.
    Why???
    U002 is already implementiert  in
    Class ZCL_IM_FI_FORMULA_EXIT
    method IF_EX_G_SET_FORMULA_EXIT~EVALUATE
    CASE flt_val.
        WHEN 'U002'
    Could anyone help me? Thanks!
    Klara Zhao

    dollyb wrote:
    if enter 05.2008
    the volume should look like below as a vairable range.
    sales volume
    01.2008 - 05.2008
    you want  01.2008 - 05.2008 as description , thats what your requirement right?
    When 'ZTEXT2'.
    DATA: ZYEAR(4)   TYPE C,
    ZTEMP1(6) TYPE C,
    ZLOW(14) TYPE C.
    if i_step = 2.
    CLEAR L_S_RANGE.
    Loop at i_t_var_range into intern_range where VNAM = 'user entered variable for calmonth'.
    *lets say user entered 05.2008
    ZTEMP1 = INTERN_RANGE-LOW.
    * now ZTEMP1 has 05.2008
    ZYEAR =  ZTEMP1+0(4)
    * zyear = 2008
    *A SLIGHT MODIFICATION TO CONCATENATION 
    CONCATENATE '01'  ' .'  ZYEAR '-'  ZTEMP1 INTO ZLOW.
    *SO 01. 2008 -05.2008 WILL BEN IN ZLOW
    L_S_RANGE-SIGN = 'I'.
    L_S_RANGE-OPT = 'EQ'.
    L_S_RANGE-LOW = ZLOW.
    APPEND L_S_RANGE TO E_T_RANGE.
    ENDLOOP
    ENDIF.
    use the text variable as description then u will get the required result i.e &ztext2&
    HERE I DIDN'T written any  L_S_RAnGE-HIGH.
    Regards,
    Ranganath
    Edited by: Ranganath on Nov 9, 2011 9:41 AM

  • Need Help Using the Report Painter

    Hi experts,
    i'm using report painter GRR1, how can i resize the Lead Column? i need it to increase its length, i had already maintained the texts(short middle and long texts).
    Thanks for the help,
    zryxel

    Go to FORMATTING > COLUMNS > Select the Format Group and Edit Column Width.
    Reward points if useful.
    Salamat!
    AJ

Maybe you are looking for