FTP access changed?? .. for 8iR2

Has there been a change in FTP access to the technet downloads? I have always been able to download the Oracle software from technet via ftp.oracle.com, and am intending on downloading 8ir2 for linux, but now ....
Here is what I get:
open ftp.oracle.comConnecting to 209.246.14.42...
Hello, Welcome to ftp.oracle.com!
web54 FTP server (FileDrive-EX 2.1) ready.
220: Hello, Welcome to ftp.oracle.com!
web54 FTP server (FileDrive-EX 2.1) ready.
Connected to 209.246.14.42.
Cmd: USER anonymous
530: User ftp access denied.
User ftp access denied.
Cmd: QUIT
This is a different message compared to having the FTP server having too many logged in users.
Is everthing now forced via HTTP? ... but I prefer using ncftp.
John Saslvo
null

Obviously Oracle is having some capacity problems. Its been this way for the last three months or so.
PCWeek even commented on Oracle's capacity problems. Check out:
http://www.zdnet.com/pcweek/stories/columns/0,4351,2553872,00.html

Similar Messages

FTP Mirror Site for 8iR2

Hey,
is anyone willing to put up an FTP site so that people like me can actually download it...
I have been trying to log in for a week now and still no success, and I know I'm not the only one...
So those of you who already have it, could you share it???
Thank you,
Pascal ([email protected])

Yea! Microsoft uses 'Twocows' servers around the world, Oracle suppose to serve all customer by the single server.
Try to download on the weekend. Bandwith is about 300Kbps.

I'm modifying someone else's website for the first time (noob = yes). I only have ftp access to the site server. Before uploading changes, is there a easy/quick/recommended/etc way to make a copy of the files I'm about to replace?

Great, first post, sorry for the title. But to repeat it:
I'm modifying someone else's website for the first time (noob = yes). I only have ftp access to the site server. Before uploading changes, is there a easy/quick/recommended/etc way to make a copy of the files I'm about to replace?

You can use the Dreamweaver FTP (or a different FTP client) to completely copy the original website to your development computer, then, before making changes, you can copy the whole thing to a directory called something like "website original"
If you want to run both the old and new sites on the remote server, this is often possible. Add a folder/directory to the server and call it something like "new" and upload the new files there until you are ready to replace the old site
All of this you can do with FTP

ABAP Access Key for Table change mode MCVKUSR & MCVBAPUSR in SE11

Dear All,
I'm using SAP ECC6.0. I want to create a new database table in the dictionary to be used in my programs. I proceed in the following way:
1. I run the SE11 transaction
2. At the first entry I write the name of the table to be Change created ( Display mode Showing )
3. I click on the change button.
4. It will ask for Access Key
But then the system asks me an Access Key , where can I get this?
I have SAP License Key.
DB Table Name : MCVBAPUSR & MCVKUSR
Please Let me know
Thanks in advance,

Dear ,
I go to Service market Place site, from SSCR Tab then I have to select a object from the list is TABL.
and enter the Particular Object & Table Name . Now I got it Access key for Particular Object.
Thank you for your quick Response.
Once again Thank u.
Regards
Thomas.T
Edited by: thomas_raja on Jun 5, 2011 6:24 AM

"The iTunes library file cannot be saved. You do not have enough access privileges for this operation." Help! This keeps coming up. I've not changed anything. What do I need to do to fix this?

"The iTunes library file cannot be saved. You do not have enough access privileges for this operation." Help! This keeps coming up. I've not changed anything. What do I need to do to fix this?

Sounds like a Windows user privelidge problem. Are you using an administrator account on the PC?

CANNOT ACCESS DOWNLOAD FOR READER EVEN WITH CHANGED PASSWORD

CANNOT ACCESS DOWNLOAD FOR ADOBE READER EVEN WITH A CHANGED PASSWORD AND I HAVE BEEN ON CHAT

There are several possibilities as to why a user account may
not be correctly available or a password to it reset to fix it.
One of them may be, if the short name of the computer or of
an account was changed by the user; and later the system
may appear different or changed, with some of the user acct
settings or preferences no longer as they were prior to that.
There is a way to create a new admin level user account and
then move the older user info into the new account; then go
in and delete the other one. I am not certain as to how to do
this; but the topic has come up in these discussions, and the
general path is about the same from Panther through Leopard.
A few details may be named different, but similar as things go.
• Mac OS X: *How to change user short name* or home directory name:
http://support.apple.com/kb/ht1428
• How do I change owner's name in my Mac:
http://www.askdavetaylor.com/howto_change_owners_name_applemac.html
While these kinds of details may not be behind the exact problem in
the computer in question, directory and user account issues do often
have similar causes. Often, they are user-caused events. If the general
Directory of information on the hard disk drive has a problem, the use
of a third-party disk tool such as Disk Warrior is usually advised. If that
were needed, usually more evidence across the system would appear.
There may be a way to use a Setup Assistant to recreate a new user
experience and start over with a new admin account and user name.
Then go into the system to ferret out the old user info.
+Sorry I can't be of more help; as I am being distracted by an elderly+
+person who can't figure out why I am online or what it means to be.+
Good luck & happy computing!

I keep getting dialog box saying " The itunes Library file cannot be saved. You do not have enough access privileges for this operation" I am the only user on this computer and only one library! how do i change access privileges please?

hi I keep getting the dialog box " The iTunes Library file cannot be saved. You do not have enough access privileges for this operation"
How do i amend this as i only have one account and one library. I cannot save new work or delete duplicate files

A belated reply, as the problems itunes has have discouraged me from using it much. If you uncheck the "read only" box, it doesn't stay that way! Next time you use it, the box comes up checked.
I'm still having that problem, even when I open iTunes as administrator.
I've yet to see the answer to this problem. I use itunes mostly to download audiobooks, and I'm ready to download more, and want to save them!

Change documents or logs for Analysis authorisation access changes

Is there a way to review the change history or table logs in BI 7.0 to show who assigned analysis authorizations and when it was assigned or removed? I presume there should be a SUIM change document that shows the Analysis authorization access changes that are assigned directly to users via RSU01 or RESEADMIN when these analysis authorizations are not included in roles.
An example area of concern is with the assignment of 0BI_ALL, having an accurate log or mechanism to track the assignments to users.

Hi Srinivas,
you can activate in DDIC that your entry changes will be logged.
Go to SE11 -> Your Tablenname -> CHANGE
Button TechnicalSettings -> Activate checkbox Log data changes.
From now on any chenge will be logged in table DBTABLOG.
Kind Regards
Henner

Can't disable my FTP Access ports!

Hi. I'm running MacOS X 10.3.9 on a Mac Powerbook with all of Apple's latest Security Updates installed. I did a virgin installation and no other software programs has been installed yet, and I need to find out if my current indicated FTP settings in the built-in Firewall panel is normal or whether maybe my system has been somehow hacked or attacked by an unknown virus.
In my computer's System Preferences/Sharing/Services panel, all options are currently off, and none of the items are checked. In the System Preferences/Sharing/Firewall panel, all options are also unchecked. But even though I've unchecked all items and they're supposed to be off, my FTP Access port is still showing the description "FTP Access (20-21, 1024-65535 from 20-21). First question - this lengthy description about my ports seem strange. Does everyone else show this same description in Panther, or is it just me?
But even more strange and bizarre is when I hover my mouse over the same FTP Access description, a balloon notation will pop up with the following information . . .
. . . "Ports 20 and 21 on your computer are open for FTP. If others connect to your computer from ports 20 and 21, then ports 1024 through 65535 are open. When you turn on FTP Access in the Services pane, you also allow the service access through the firewall on the indicated ports. To stop access through the firewall you must turn off this service using the Services pane." . . .
Personally, I don't want any ports open on my computer. Therefore this notation seems strange to me, especially considering that all my ports are supposed to be "off", therefore why is this notation still indicating that ports 20 and 21 are open. Even more strange is no matter what I do and no matter what settings I change, I can't alter the configuration of ports 20 and 21 and make them show as closed. I've tried everything, but ports 20 and 21 still remain open no matter what I do, at least according to this message. Question - Is what I'm seeing normal for everyone or are other users showing something different?
Below is an image of what I'm talking about :
http://homepage.mac.com/starshone/misc/PantherFTPAccess.jpg
Thanks in advance. Any help regarding this would be appreciated.
17" Mac Powerbook 1.5GHz Mac OS X (10.3.9)

If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

Lost website and ftp access in Leopard

After one of the recent security updates, I lost access to my website and I no longer have ftp access to my computer. I have a mac mini in my office that I host a company website on (with a static IP address). I also access my office files using the Fetch FTP program. I can no longer access either one. I can ping the computer over the internet and get no packet loss. Nothing hads changed on the router. I can access other computers in the office, only having a problem with the mac mini.

Your problem doesn't look like a technical one. It's more a problem of practices in your organizations.
Michals suggestion with the identity-firewall is a very good choice if you still want to keep complete control over the traffic that is allowed through your firewall. But your post sounds a little bit that you would like to delegate the work.
For that, an FTP-proxy in the DMZ could be a solution. This proxy is allowed to access the internet with FTP on your firewall. And you can delegate to administration of that proxy to the desktop-crew which are probably the admins that know best who needs FTP-access and who doesn't.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

FTP_CONNECT: User ------- has no access authorization for computer -------.

Hi, could anyone please help me resolve the following issue:
When i run the code below, it comes back saying "could not connect to "host". When tried to run in debug or test the FM "ftp_connect" it says "user ..... has no access authorization for computer .....
REPORT ZALB_FTP_TEST.
types: begin of t_ftp_data,
         line(132) type c,
       end of t_ftp_data.
data: lv_ftp_user(64)                value 'branch'.     "change this
data: lv_ftp_pwd(64)                 value 'careful'. "change this
data: lv_ftp_host(50)                value '10.50.1.199'.     "change this
data: lv_rfc_dest like rscat-rfcdest value 'SAPFTP'.
data: lv_hdl    type i.
data: lv_key    type i               value 26101957.
data: lv_dstlen type i.
data: lt_ftp_data type table of t_ftp_data.
field-symbols: <ls_ftp_data> like line of lt_ftp_data.
*describe field lv_ftp_pwd length lv_dstlen.
lv_dstlen = strlen( lv_ftp_pwd ).
call 'AB_RFC_X_SCRAMBLE_STRING'
id 'SOURCE'      field lv_ftp_pwd
id 'KEY'         field lv_key
id 'SCR'         field 'X'
id 'DESTINATION' field lv_ftp_pwd
id 'DSTLEN'      field lv_dstlen.
call function 'FTP_CONNECT'
exporting
    user            = lv_ftp_user
    password        = lv_ftp_pwd
    host            = lv_ftp_host
    rfc_destination = lv_rfc_dest
importing
    handle          = lv_hdl
exceptions
    not_connected   = 1
    others          = 2.
if sy-subrc ne 0.
write:/ 'could not connect to', lv_ftp_host.
else.
write:/ 'connected successfully. session handle is', lv_hdl.
call function 'FTP_CONNECT'
    exporting
      handle        = lv_hdl
      command       = 'dir'
    tables
      data          = lt_ftp_data
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      others        = 4.
if sy-subrc ne 0.
    write:/ 'could not execute ftp command'.
else.
    loop at lt_ftp_data assigning <ls_ftp_data>.
      write: / <ls_ftp_data>.
    endloop.
    call function 'FTP_DISCONNECT'
      exporting
        handle = lv_hdl
      exceptions
        others = 1.
    if sy-subrc ne 0.
      write:/ 'could not disconnect from ftp server'.
    else.
      write:/ 'disconnected from ftp server'.
    endif.
endif.
endif.
Thanks in advance for the help.

It doesn't work for me if I just maintain * entry.
But it works after I maintained specific IP address into the table,
ref notes:2072995 - User has no access authorization for computer
Cause
The message comes after the implementation of note '1605054 - Restriction in access to FTP Servers & usage of test reports' or upgrading to a
support package that contains this note. This note was created to prevent malicious users from accessing remote FTP servers.
Resolution
1. Please ensure that all manual steps from note 1605054 are implemented in your system along with the code corrections
2. Then please enter the allowed FTP servers into the table SAPFTP_SERVERS or enter ‘*’ to allow all FTP servers.

FTP Access through router.

Hello,
I am trying to set up a simple ftp server to exchange files with my friends in other cities. When i start the service (FTP Access) it gives me this link:
ftp://192.168.0.3/
However this ip is the internal ip address i use to connect with my wireless router, and not my actual ip address. So is there a way to make it work, or this service can only be used if you dont share the internet?
Any advice will be very much appreceiated, bear in mind that i have control of the router so i can easily set up port permissions.
ps. I guess i 'll have the same problem if i try to set up a web server, and the solution will be the same as well.
THANKS!!
Mac Mini Duo Mac OS X (10.4.6) having switched one month now and never going baaaaack!

Hi frag,
Yes that IP address is on your internal network - your Mac has no knowledge of the external IP address that your router interfaces to the outside world with.
The config page for your router, or an external IP tracer, will show you the address that your friends need to use. But, depending on the connection you have to your ISP, your IP address may change on occasion (dynamic). In which case you may have to look into using a dynamic DNS provider which allows a fixed domain name to point to a dynamic IP.
Also, you are probably better off to use a 3rd party FTP server - such as PureFTPd Manager - which allows more flexibility with config, which will be very helpful for navigating through the router.
Graham

Setting up ftp access to my site

I am using DW CS4 to create 3 low traffic sites and am serving the sites from my home desktop iMac. I setup Virtual Hosting to allow access to my sites. I am now trying to allow others to edit parts of the site and I believe that I must enable ftp access to the site. I have enabled port forwarding of port 21 on my router but I am having problems. I do the following to check ftp connection.
In Terminal I enter "telnet www.mywebsitename.com 21" The response comes back "Trying (myIPaddress)...
telnet: connect to address (myIPaddress): Operation timed out
telnet: Unable to connect to remote host"
I am reasonably sure that I must get this to work before I attempt to redefine the remote site definition using ftp within Dreamweaver CS4.
Please be relatively simple with suggestions or questions, I am well aware of the fact that I am a bit of a novice trying to do rather complex things.

Thanks for your help, I now have ftp access to my site working OK. I
have redefined the site using ftp in the Dreamweaver site definitions
and I can upload changes with no problem. However, i am now trying to
setup InContext editing capability to the site. W hen I go thru the
steps to add a site to the InContext Admin section the first steps in
the process work fine. I am able to fill out the ftp settings with my
username and password and when I test the settings it comes back that
it is able to connect to the site. The next step is where I run into
problems. When I try to add the assets I get an error that says
either the folder does not exist or the user does not have the proper
permissions to open the root folder. I have attached a screen shot of
the actual error message if it helps. This is the odd thing. I can
use the same username and password with another ftp Client program and
I have complete access to the root folder and all the files in it. It
seems that if I have adequate permissions to view and change the root
folder with a generic ftp client program I ought to be able to open it
thru the incontext setup. By the way the username and password I am
using to try to get this initially setup is the administrator username
and password for my server, so it seems to me there should not be a
permissions problem.
Am I missing something obvious?
Steve
Here is the error log. Note: www.sonautosales.com is the name of
the root folder on the server.

Limit FTP access

I've been trying to control FTP access, as have many others judging from the posts. When I access FTP, anonymous access is off, I can traverse up the directory to the root of my FTP servers HD and go into any folder I want.
Also changing the user environment from FTP root & share points, to the others and back doesn't seem to do anything. Everytime I log in using FTP I am in the users home directory and the other shares are not visible.
I tried installing PureFTP but uninstalled it because I wanted the Apple FTP server to work. I'm wondering if PureFTP did something crazy and broke Apple's FTP.
TIA,
John McAdams

Found out an interesting, maybe useful consequence of installing PureFTP Manager. The installation writes a complicated ftpaccess file that keeps PureFTP as the FTP daemon. Here's what happened. I installed & configured PureFTP Manager and added a few virtual users. Used it for a while and it worked great. I needed to open up the firewall for passive FTP clients. I shut down PureFTP and opened up the ftpaccess file.
Now usually when I open this file running Tiger's FTP server, the file is blank. This file had a lot of information in it. I added my passive ports line to the end of the file and saved it.
Back in Sever Admin I added the Passive FTP service to the firewall and decided to start up Apple's FTP to test it out. When I ftp'd in as a user in the local directory I was greeted with the PureFTP banner! Everything worked fine. Just to check I opened PureFTP Manager and sure enough the gui said that it was off. I tested the ftp configuration by logging in as a virtual user that I had set up in PureFTP Manager. No problem.
So now I can use PureFTP Manager and Sever Admin together. That means I get the controll of PureFTP Manager but the remote administration of Server Admin. Now I need a way to look at the PureFTP logs in Server Admin but I'm happy with it for the time being.

Ftp access locked?

I'm trying to update someones website but when I connect to the server I get the following message:
"connection failed - maybe the ftp access is locked - check your control panel or contact the administrator"
WTF? Is it possible that someone has locked ftp access? BUM, BUM, not had this issue before.
Anyone shed any light onto the problem before I waste too much time.
Thanks
Os.

hans-g. wrote:
Hi osgood,
as I know and as you said, you are not familar with Fillezilla, so it could be, either you install it (you can use your other FTP programs without any problem) or you try to work and proceed analogously:
Here I can show you my settings for the file attributes (German FZ: "... -Brechtigungen" means sth. like "..-permissions", Lesen > to read ; Schreiben > to write; Ausführen > to execute):
You will find the meaning of the settings under "Frequently used numeric parameters for chmod" in this link:
http://www.codecoffee.com/tipsforlinux/articles/032-2.html
If all this does not work, probably remains only bemdesign's hint: Either way, it will require your client's hosting to fix things on their end for your FTP account.
Hans-G.
P.S.
Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and
http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Thanks Hans,
I'm aware of the 'chmod' capabilities but I can't even get into the server to change them, even if they were incorrect
This, I think, is an error before getting as far as setting the permissions stage.
I've left it with the client as I wasn't involved with the hosting package purchase. I can get them the hosting details via the 'whois' domain look-up service if they don't know. However they don't know what they are asking or doing so if this get resolved quickly or not is in the lap of the Gods. If they want me to sort it out they will have to throw a few more sheckles this way.
Os.

FTP access changed?? .. for 8iR2

Similar Messages

Maybe you are looking for