FTP-adapter does not register subscribed events

I have installed an FTP-adapter and configured it to receive messages. I have created an application with the same name and set up a subscription to an event from an generic adapter. I have another db adapter also subscribing to the same event, and this works fine. However the ftp adapter does not receive the subscribed event. I have checked the MESSAGEINFOIDTABLE table, and the subscription between the FTP adapter and the genric adapter is not registered here. I have tried to resintall the adapter several times using different names etc, but it does not seem to register. Anyone had this situation before, or does anoyone have any tips?

Audun,
This is very strange. You haven't got 2 environments have you? Developing on one, but looking at another? Sorry for the dumb question, but I've done that before!!
If you have 1 event, 1 publishing and 2 subscribing, then your count on the MESSAGEINFOIDTABLE table for this event should be 3.
Have you tried pushing the metadata in iStudio to your FTP Adapter? Or restarting the FTP Adapter?
You've definately subscribed to the correct Business Object and Event when mapping your message from Common View to Subscribe view?
Your repository may be all screwed up. This can happen. iStudio doesn't have the best history! When you've reinstalled the adapter again, or re-designed the message again and again, you could have orphaned objects all over the place preventing proper message design taking place.
As a sanity check, stop all services connecting the repository (iStudio, Adapters, OEM, sqlplus etc.) Save / backing up your current repository using the "oaiexport" script.
Once you done that, drop the existing repository, and create a new fresh one. (use the "hubschema" -drop, then -create script).
Just try creating that same single message design again with just one publishing and one subscribing adapter.
If you still have the same problem, then I think it is one for Oracle Support.
Good luck,
Yan

Similar Messages

  • HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini.  So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

    I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini.  So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

    Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
    As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
    Did you use any third party software to move your Firefox data from internal memory to the storage card?

  • My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

  • Apple av adapter does not work after updating ios 5,01

    apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

    Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

  • Titles are not visible, they show up on timeline as a grey box no text  does not effect other events or projects

    titles are not visible, they show up on timeline as a grey box no text  does not effect other events or projects. could this have something to do with motion

    Without seeing the timeline it sounds as if they've been off. Maybe you pressed the V or the role is switched off in the timeline index.

  • Account payment does not register

    at end of prepaid account payment process, my credit card payment does not register. Is there some computer setting I should be aware of? This has been happening since the beginning. I just want to pay online or easily without having to drive to a store - and can't do it.

        Hello MGri,
    It's important to be able to process your payments conveniently! Since you've been having this issue since your online account was set up, we need to ensure that your account is set properly for this option. Our PrePay Team is available to ensure your account is set up properly for online payments. You can reach them directly at 888-294-6830. Please let us know if you need anything further.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • How to notify in case SQL query(JDBC sender adapter) does not fetch records

    hi,
    How can we notify(by alerts or something) in case SQL query(JDBC sender adapter) does not fetch records? In channels logs it only says processing started & finished(no message is created for same).
    Thanks,
    Mayank

    Hi,
    1 ) What is exact audit log message ?
    2) Try fetching the count in SQL statement  if there are any valid records it will give the count.
        May for testing you can use <TEST> in update statement.
    3) Have you used taskTimeout parameter ?
    4) Are multiple channels polling on same table ?
    regards
    Ganga

  • 30-Pin Adapter does not lock in to iPad Air

    30-Pin Adapter does not lock in to iPad Air?

    This adaptor lets you connect devices with a Lightning connector to many of your 30-pin accessories. Supports analogue audio output, USB audio, as well as syncing and charging. Video output not supported. 
    http://store.apple.com/sg/product/MD823ZM/A/lightning-to-30-pin-adapter

  • IPhone is frozen. Screen does not register sliding movements.

    Recently my iPhone has not been working. First it is not registering my movements, as in the sliding/pressing of my finger is not working. I tried to restart it by pressing the turn off/on button as well as the home button at the same time and now it is stuck on the sign off screen with the red slider. I cannot get it off this screen and the screen stays on. I tried hooking my iPhone up to my PC to restore it in iTunes but my PC does not register that my iPhone is connected (the icon does not appear), therefore I cannot restore it. I've tried what I can to attempt to get it to work with no avail. There's no way for me to fix the issue that I know of if the phone will not cooperate by itself or with my PC. If anyone has a solution to this problem please let me know, I may just have to go to the Apple Store if not.

    Hello there, inhoc478.
    The following Knowledge Base article has some great information on how to restore your iPhone from a locked state:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Why to I FREQUENTLY have to reload my page to get hot links to work? Andmy keyboard frquently does not register key strokes, particularly the space bar.

    Why to I FREQUENTLY have to reload my page to get hot links to work? Andmy keyboard frquently does not register key strokes, particularly the space bar.

    # Right-click an empty area of the tab bar and choose Customize.
    # Click the Restore Defaults button, then the Exit Customize button.
    # If you don't already have it, install [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer] and restart Firefox when prompted.
    # Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
    # Next to Classic Theme Restorer, click the Options button.
    # On the Main tab, make sure "Movable back-forward button" and "Hide urlbars stop & reload buttons" are checked. You might also want to check "Combine stop & reload buttons". Close the options window when done.
    # Right-click an empty area of the tab bar and choose Customize.
    # Drag the Back/Forward, Stop and Reload buttons onto the navigation toolbar.
    # Click the Exit Customize button in the lower right corner when done.
    That being said, I should point out that you can reload pages in other ways.
    * Right-click any tab and choose Reload.
    * Right-click an empty area of the page and choose Reload.
    * Press F5.
    * Press Ctrl+R (Mac: Command+R).

  • Power Adapter Does Not Charge the Battery and Charge Light Is On?

    Power Adapter Does Not Charge the Battery and Charge Light Is On?
    My power adapter doesn't charge my computer anymore. however the charge light is on.
    Please help my battery is draining fas

    So, with your power adaptor connected not only does the battery not charge but the powerbook is not running on ac power. Then I guess the power adaptor is faulty. In as much as you've verified this with a known good one a new one is in order. Try yours in another powerbook to make sure.

  • I had an ipod touch 4th gen and used the apple universal dock to play music through my stereo.  I just got a 5th generation and a lightning adapter but the adapter does not fit the universal dock.  Apple tech support has no solution, does anyone?

    I had an ipod touch 4th generation and used the Apple Universal Dock to play music through my stereo.  I just got the 5th generation and the lightning adapter but the adapter does not fit into the dock.  Apple tech support has no solution, does anyone?

    That is the adapter I purchased from Apple which does not fit in the Apple Universal cradle (which apparently is no longer universal).  However, I just created my own solution.  The cradle holds the dock connector at a slight angle so the adapter, which has a straight bottom edge, will not slide down far enough to make a connection.  Since the adapter has a plastic case, I used my Swiss Army knife to whittle it down to fit.  It's a no-tech solution, and free!

  • Skillbuilder calendar plugin does not show any events

    Hi,
    I have installed the Skillbuilder calendar plugin and added it to a page. The actual calendar renders fine, however it does not show any events despite the fact that I know events are there to be shown.
    The SQL I am using is
    select
      rowid as id,
      job_number as title,
      'false' as all_day,
      to_char(start_date,'YYYY-MM-DD "T" HH24:MI:SS') as start_date,
      null as end_date,
      null as url,
      null as class_name
    from diary_vw
    In SQL Dev this shows the following results:
    ID
    TITLE
    ALL_DAY
    START_DATE
    END_DATE
    URL
    CLASS_NAME
    AAAKuDAAFAAADJCAAD
    ADMIN
    false
    2014-01-20 T 16:15:00
    AAAKuDAAFAAADJCAAE
    ON SITE
    false
    2014-01-22 T 08:00:00
    AAAKuDAAFAAADJHAB1
    ADMIN
    false
    2014-01-21 T 09:00:00
    AAAKuDAAFAAADJIAAJ
    ADMIN
    false
    2014-01-20 T 15:00:00
    I have tried specifying the END_DATE as well using a similar format but still no joy.
    Any ideas?
    Regards,
    Jeremy

    I don't use that plugin, but I believe the problem could be this line
      to_char(start_date,'YYYY-MM-DD "T" HH24:MI:SS') as start_date
    Have you tried selecting start_date instead? Is start_date a date column?
    Also, I believe you should specify both start and end date; I don't see how else is your event supposed to show on the calendar.
    Like I said, I don't use that plugin, so I'm quite possibly wrong, but if you recreate the problem on apex.oracle.com, I'll be happy to look at it.

  • After install snow leopard, ical does not show the events of some calendars

    After I install snow leopard, ical does not show all the events, or simple does not show the events of some calendars that I created.
    Can somebody solve this problem? Is there some update for ical?

    Try the following:
    1 - Go to your user account home folder, and open the library folder within it.
    Look for the folder named "Calendars" and inside you might find a bunch of different folders with weird names. If they are there that means your calendars might not be lost.
    2 - Look for the file "Calendar Cache". That file might be corrupted. Trash it. You may want to save a copy of it elsewhere. Once trashed, re-open ical. This should force it to rebuild its library based on those folders with weird names you saw. Your calendars should be back. Good luck

  • A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive.  Does anyone know why this is happening?

    A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive.  Does anyone know why this is happening?

    The beeps could be caused by something as simple as a loose internal wire or connection.  If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
    If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose.

Maybe you are looking for

  • ASA 5505 Site-to-Site VPN not initializing

    I have two ASA 5505 running 8.4 and I tried using the VPN wizard and using the CLI but i am not able to get the peers to initialze.  I have looked at other configs and am not seeing what is missing. I have tried packet tracking through the ASDM and i

  • Trigger Vendor master idoc automatically

    Hi Experts, When i save idoc vendor master (CREMAS05) , how can i trigger the idoc and send it to XI system automatically ? I tried running the report RSEOUT00 with the idoc details but message displayed is 'no idoc ready for processing'. Regards, Sy

  • OB28 - Validation for the G/L Account creation year

    Hello, Is there any possible way of doing this validation? Validate G/L Account by the year of creation? Ex: No G/L account cant be used if created in 2008!?? Regard, and thanks in advance, Rui Ribeiro

  • Why i cannot install free applications eventhough i have apple id account

    i already have an apple id and passowrd but i cannot download applications, even the free ones. My sister also owns an iPhone5 but does not envounter the same problem as mine. What should i do?? Thank you.

  • Aperture startup failure after Time Machine restore.

    Hi, I got a hard drive replaced yesterday, during a well deserved holiday. Speaking about bad timing. Anyway. The drive was installed and Time Machine was fired up to restore Aperture 2.1.4 et all. Aperture however won't even start! I must be missing