Ftp and telnet

install oracle Linux 5.0 update 3 i am not able to telnet are ftp .. i am able to use ssh via putty any idea

Hello,
In order to start ftp (run this commands as root):
#service vsftpd start-to make sure that ftp starts everytime you reboot the system:
#chkconfig vsftpd onI order to start telnet (not recommended though):
-first you need to edit this file:
[root@kido xinetd.d]# cat /etc/xinetd.d/krb5-telnet
# default: off
# description: The kerberized telnet server accepts normal telnet sessions, \
#              but can also use Kerberos 5 authentication.
service telnet
        flags           = REUSE
        socket_type     = stream
        wait            = no
        user            = root
        server          = /usr/kerberos/sbin/telnetd
        log_on_failure  += USERID
        disable         = yes
}-it should like this
[root@kido xinetd.d]# cat /etc/xinetd.d/krb5-telnet
# default: off
# description: The kerberized telnet server accepts normal telnet sessions, \
#              but can also use Kerberos 5 authentication.
service telnet
        flags           = REUSE
        socket_type     = stream
        wait            = no
        user            = root
        server          = /usr/kerberos/sbin/telnetd
        log_on_failure  += USERID
        disable         = no
}-after this, restart xinetd server:
[root@kido xinetd.d]# service xinetd restart
Stopping xinetd:                                           [  OK  ]
Starting xinetd:                                           [  OK  ]I strongly advice you to use ssh instead of telnet (it's far more secure):
#service sshd start
#chkconfig sshd onkido

Similar Messages

  • Ftp and telnet to Solaris 8/9

    Hi,
    When I telnet or ftp to a Unix machine running Solaris 8 or 9, it usually takes about 3 minutes to give me the login prompt, does anyone know why it takes so long to get the prompt?
    Thanks!
    Joseph

    Look in your /etc/nsswitch.conf file. This shows the order in which your system resolves IP addresses. Specifically, the "hosts" line.
    If you are using dns, use this for the hosts entry:
    hosts: files dns
    If you are not using dns, use this line:
    hosts: files
    Also, make sure your dns is working correctly (if you are using it).
    Populate your /etc/resolv.conf file with the following info:
    domain yourdomain.com
    nameserver IP.OF.DNS.SERVER
    nameserver IP.OF.ANOTHER.DNS
    Test it out with the nslookup command. For example:
    # nslookup www.sun.com
    The response should look something like this:
    Server: DNS1-INTRANET.yourdomain.com
    Address: IP.OF.DNS.SERVER
    Name: www.sun.com
    Address: 64.124.140.199

  • Newbie Q about terminal and telnet

    Not sure this is the right forum but I posted on the osx server threads with no reply so here goes.
    Q. turning off the wan side telnet port on my router using telnet via the terminal.?
    I've seen instructions some where about how to use telnet to turn off sip in a router re getting ichat to work. Can I close or stealth my telnet port in a similar way. also ping and ftp and 80 are open not stealth. (re shields up site.)
    I'm used to seeing no real traffic over my old & possibly dead router unless I initiate it. I've just got the echolife hg520s over which their is continual if minor traffic and it bugs me.
    Btw... in the firmwares http gui I've disabled the cwmp option and selected all wan side options as disabled including ping and telnet.??
    Thanks

    This is very strange. Being the paranoid kind of guy that I am, whenever I go on business travel, I run nmap against my home network (I'd do it more frequently from the office, but my employer's IT Secret Police blocks almost all outgoing destination ports), and this last trip (last week) I found telnet 23, http 80, LM Social Server 1111 (what the heck is that?) and 52869 open. In Terminal, I typed telnet {myHomeDomainName} and got a login prompt to my modem! Previous nmap about one month prior all was ok. I freaked out.
    Once back home, I could not close the ports, even though the modem's configuration page said that the only port forwarded was my ssh port (as desired) and that remote management was disabled. I hard reset the router, I reinstalled the firmware from the critical recovery disk image, and I reinstalled the firmware update -- multiple times. That would close 'em off, for about an hour or two. I was on the phone with my ISP (Qwest) about three or more times for about 45 mins per call, and then, mysteriously, the ports have closed with no interaction on my part and have remained closed thus far for two days now. (It just so happens we have a WAP at work for visitors, puts 'em outside our really restrictive firewall, but when there, you can't access anything inside the corporate LAN when you do that, but I affiliated to that WAP anyways so I could run nmap this afternoon during lunch.) So I'm wondering whether my ISP's Secret Police have a backdoor programmed into their firmware set for the DSL modems that they sell, but they shut it down (at least temporarily) since I caught 'em, well, caught somebody, with my ports open?
    Check your firewall logs for unusual activity: in Terminal, as admin-privileged user, type
    +sudo cat /var/log/ipfw.log+
    if unusual probes or activity, get on the phone with your ISP, ask why your modem config pages say your firewall is on and no ports are forwrded but telnet's open, and if you have unusual acitivity in those logs, ask 'em to start an investigation.

  • Ftp and http access over XDB repository is not allowed...

    When I try to execute the following command on a reasonably fresh Oracle 11 installation:
    insert into "XMLTEST" ( "name", "xmlfof" ) values ( 'small', DBMS_XDB.GETCONTENTXMLTYPE('/public/small.xml') );
    -- The schema is correctly registered, the file "small.xml" is in the /public repository folder, the user has every conceivable role and priviledge
    -- http access works fine from a remote location, tried to execute the command on the server and from remote system...
    I get the following error message:
    ORA-31020: Der Vorgang ist nicht zulässig, Ursache: For security reasons, ftp and http access over XDB repository is not allowed on server side ORA-06512: in "XDB.DBMS_XDB", Zeile 1915
    Searching for an answer on the forum didn't produce any concreate explanation... Does anyone have any idea how to solve this problem?

    As it turns out, the XML file contained a reference to a DTD at an external web-site, which caused the problem - it was identical to that described here:
    Re: ORA-31020 when using XML with external DTD or entities
    After removing the reference, everything works perfectly...

  • Is SNMP RO and telnet good enough for IPM?

    Dear friends,
    I have only SNMP RO access to the router and telnet access as well from Ciscoworks LMS.
    But i dont have SNMP RW access.
    Is it possible that i configure ip sla monitor manually on the routers / switches and just use IPM to poll these routers and collect the SLA statistics?
    Thanks a lot
    Gautam

    IPM requires read-write access.  However, you could try configuring the collectors on the devices manually, then import those collectors into IPM using the "ipm importcollector" cli command.  I haven't tested doing this without having SNMP RW configured, but it should work.  IPM will just not be able to fully manage the collectors, but it should be able to poll them.

  • I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is do

    I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is doing the same could not install. Even after I registered my copy. The last time I used this program it showed up under tools and worked great. any suggestions on whats going on and how I can get around this?.by ralphd3g

    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

  • Difference between Seeburger FTP and OFTP adapters

    hi,
    Can anybody tell me the difference between Seeburger FTP and OFTP adapters?
    On what basis should one make a business decision as to which adapter to go for?
    Kindly help urgently.
    Regards,
    Loveena

    Hi ! Loveena
    Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
    Seeburger Adapters are used to Connect the applications which are using Message protocol/Transport protocol as CrossIndustry(payment), VAN, OFTP, AS2(EDIINT), Generic and EDI based applications.
    Re: Seeburger Adapter
    Reg seeburger seeburger
    installation
    https://forums.sdn.sap.com/click.jspa?searchID=2268965&messageID=3210111
    OFTP ist a communication protocol. This has nothing to do with the format you have to transfer.
    regards the format you have to clear at which standard you have to transfer the messages. This can be any EDI format. At OFTP area the standard are often VDA or ODETTE.
    You can create this messages using different EDI adapters (of course also the mendelson adapter ).
    Regards OFTP you need additional software which handle the transfer based on the OFTP standard. Mostly you also need an ISDN card for using this protocol.
    We can support you with this software for OFTP transport too.
    More info also available at http://www.mendelson-e-c.com/.
    have a look at the ACTIS OFTP Adapter
    Ref: http://www.actis.atosorigin.de/solutions/en/ACTIS_solutions/SAPXI.php
    refer this thread also
    When we need Seeburger AS2 & FTP?
    XI Seeburger adapters
    Adapter for OFTP?!
    Thanks !!

  • Pull compressed file (.gz format) via FTP and place on Application server

    Hello!
    Greetings.
    We have a requirement where a compressed file in the format *.gz is to be pulled via FTP and saved to the application server after extracting.
    I searched the forums and found options to pull text or XL files, but nothing about pulling a compressed file. I wished to know if there is any process for the same. After pulling the file, it is to be saved to Application server after extracting. My doubts are as below:
    1. How to pull a *.gz file via FTP (Need batch processing)
    2. Can I extract and rename th file before saving it to applciation server? Or I need a temporary location to place the file before extraction?
    Any inputs are appreciated.
    Thanks,
    Shishir.

    Hi Sandra.
    Thanks for the confirmation.
    There is a change is the requirement. We need to Poll the FTP server for the file for the duration of one week every month.
    When the file is found, we are to take the *.gz file, extract and put on the application server.
    My question is how do we poll the application FTP server? I searched  the forums and found a few threads that say that an FTP adapter is to be setup for polling the FTP server and then we can schedule it using u201CAvailability Time Planningu201D.
    /people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
    I wished to know if that is the only way to approach this requirement.
    Any help is appreciated.
    Thanks and Regards,
    Shishir.
    Edited by: Shishir Kinkar on Apr 26, 2011 11:07 AM

  • Stetting up FTP and SFTP adapters for the same interface

    Experts-
    I have a situation in which client has a requirement to setup both FTP and SFTP adapters (from adapetive adapters) for the same interface. They want to have a copy of file locally and also want a file to be sent out securly using SFTP. In my interface which was previously developed they have used one business system and added FTP and SFTP to the same. If try to add new Receiver Agreement it will say that the object already exists as the Interface Mapping is same.
    Please send me any suggestions which would resolve my problem

    Hi Hari,
    As you cannot create two Receiver agreement using only one receiver interface , please create a new receiver Interface, add that in interface determination step and then assing a different channel to new receiver agreement.
    If your requirement is to store the file ,i would suggest write the file in your unix directory using NFS( /usr/sap...). then run a AFT job (if already set up in your landscape) to transfer file securly to target destination.Not sure if its feasible in your case otherwise you can use  SFTP for the secure transfer.
    Best Regards
    Srinivas

  • Java API that implements the SSH, SFTP and Telnet protocols

    Hi,
    I'm looking for a Java API that implements the SSH, SFTP and Telnet protocols. Does anyone have a suggestion?
    Any Suggestions are really appreciated ?
    Thanks,
    Avin

    I believe SSH and telnet are used for interactive command line sessions, don't know how you want to use them in a program.

  • LAN DNS and telnet newbi help

    hi
    i am following the steps at [http://blog.ronnyegner-consulting.de/2009/10/15/configuring-a-small-dns-server-for-scan/|http://blog.ronnyegner-consulting.de/2009/10/15/configuring-a-small-dns-server-for-scan/]
    /etc/resolv.conf
    search sayantan.chakraborty
    nameserver 192.168.1.2
    nameserver 192.168.1.3
    nameserver 192.168.1.1dig
    [root@rac-1 ~]# dig @192.168.1.3 rac-1.sayantan.chakraborty
    ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5 <<>> @192.168.1.3 rac-1.sayantan.chakraborty
    ; (1 server found)
    ;; global options:  printcmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 25058
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;rac-1.sayantan.chakraborty.    IN      A
    ;; AUTHORITY SECTION:
    .                       5151    IN      SOA     A.ROOT-SERVERS.NET. NSTLD.VERISIGN-GRS.COM. 2009122301 1800 900 604800 86400
    ;; Query time: 26 msec
    ;; SERVER: 192.168.1.3#53(192.168.1.3)
    ;; WHEN: Thu Dec 24 12:34:39 2009
    ;; MSG SIZE  rcvd: 119
    [root@rac-1 ~]# dig @192.168.1.3 rac-scan.sayantan.chakraborty
    ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5 <<>> @192.168.1.3 rac-scan.sayantan.chakraborty
    ; (1 server found)
    ;; global options:  printcmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 41264
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;rac-scan.sayantan.chakraborty. IN      A
    ;; Query time: 25 msec
    ;; SERVER: 192.168.1.3#53(192.168.1.3)
    ;; WHEN: Thu Dec 24 12:35:26 2009
    ;; MSG SIZE  rcvd: 47
    [root@rac-1 ~]# dig @192.168.1.3 rac-scan.sayantan.chakraborty
    ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5 <<>> @192.168.1.3 rac-scan.sayantan.chakraborty
    ; (1 server found)
    ;; global options:  printcmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 37327
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;rac-scan.sayantan.chakraborty. IN      A
    ;; Query time: 9 msec
    ;; SERVER: 192.168.1.3#53(192.168.1.3)
    ;; WHEN: Thu Dec 24 12:35:58 2009
    ;; MSG SIZE  rcvd: 47
    [root@rac-1 ~]# dig @192.168.1.2 rac-2.sayantan.chakraborty
    ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5 <<>> @192.168.1.2 rac-2.sayantan.chakraborty
    ; (1 server found)
    ;; global options:  printcmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 58273
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;rac-2.sayantan.chakraborty.    IN      A
    ;; AUTHORITY SECTION:
    .                       9612    IN      SOA     a.root-servers.net. nstld.verisign-grs.com. 2009122301 1800 900 604800 86400
    ;; Query time: 0 msec
    ;; SERVER: 192.168.1.2#53(192.168.1.2)
    ;; WHEN: Thu Dec 24 12:36:29 2009
    ;; MSG SIZE  rcvd: 119
    [root@rac-1 ~]# dig @192.168.1.2 rac-1.sayantan.chakraborty
    ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5 <<>> @192.168.1.2 rac-1.sayantan.chakraborty
    ; (1 server found)
    ;; global options:  printcmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 22905
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;rac-1.sayantan.chakraborty.    IN      A
    ;; AUTHORITY SECTION:
    .                       9591    IN      SOA     A.ROOT-SERVERS.NET. NSTLD.VERISIGN-GRS.COM. 2009122301 1800 900 604800 86400
    ;; Query time: 0 msec
    ;; SERVER: 192.168.1.2#53(192.168.1.2)
    ;; WHEN: Thu Dec 24 12:37:09 2009
    ;; MSG SIZE  rcvd: 119packages
    [root@rac-1 ~]# rpm -qa|grep bind
    bind-9.3.6-4.P1.el5
    system-config-bind-4.0.3-4.0.1.el5
    bind-utils-9.3.6-4.P1.el5
    ypbind-1.19-12.el5
    bind-chroot-9.3.6-4.P1.el5
    bind-libs-9.3.6-4.P1.el5
    kdebindings-3.5.4-6.el5
    [root@rac-1 ~]# named status
    [root@rac-1 ~]# service named status
    number of zones: 6
    debug level: 0
    xfers running: 0
    xfers deferred: 0
    soa queries in progress: 0
    query logging is OFF
    recursive clients: 0/1000
    tcp clients: 0/100
    server is up and running
    named (pid  16550) is running...
    [root@rac-1 ~]# 0)am i on wrong path?
    1)what i am missing to make my dns and telnet to talk?
    2) /var/named/named_querylog this file is empty ---what to do then for trouble shooting ?
    regards

    /etc/named.conf
    options {
    # The directory statement defines the name server's working directory
    directory "/var/named";
    # Write dump and statistics file to the log subdirectory.  The
    # pathenames are relative to the chroot jail.
    dump-file "/var/log/named_dump.db";
    statistics-file "/var/log/named.stats";
    # The forwarders record contains a list of servers to which queries
    # should be forwarded.  Enable this line and modify the IP address to
    # your provider's name server.  Up to three servers may be listed.
    #forwarders { 192.0.2.1; 192.0.2.2; };
    # Enable the next entry to prefer usage of the name server declared in
    # the forwarders section.
    #forward first;
    # The listen-on record contains a list of local network interfaces to
    # listen on.  Optionally the port can be specified.  Default is to
    # listen on all interfaces found on your system.  The default port is
    # 53.
    #listen-on port 53 { 127.0.0.1; };
    # The listen-on-v6 record enables or disables listening on IPv6
    # interfaces.  Allowed values are 'any' and 'none' or a list of
    # addresses.
    listen-on-v6 { none; };
    # The next three statements may be needed if a firewall stands between
    # the local server and the internet.
    #query-source address * port 53;
    #transfer-source * port 53;
    #notify-source * port 53;
    # The allow-query record contains a list of networks or IP addresses
    # to accept and deny queries from. The default is to allow queries
    # from all hosts.
    #allow-query { 127.0.0.1; };
    # If notify notify ">is set to yes (default), notify messages are sent to other
    # name servers when the the zone data is changed.  Instead of setting
    # a global 'notify' statement in the 'options' section, a separate
    # 'notify' can be added to each zone definition.
    notify no;
    logging {
    # Log queries to a file limited to a size of 100 MB.
    channel query_logging {
    file "/var/named/named_querylog"
    versions 3 size 100M;
    print-time yes;                 // timestamp log entries
    category queries {
    query_logging;
    # Or log this kind alternatively to syslog.
    channel syslog_queries {
    syslog user;
    severity info;
    category queries { syslog_queries; };
    # Log general name server errors to syslog.
    channel syslog_errors {
    syslog user;
    severity error;
    category default { syslog_errors;  };
    # Don't log lame server messages.
    category lame-servers { null; };
    acl acl_transf { 192.168.1.3; };
    # The following zone definitions don't need any modification.  The first one
    # is the definition of the root name servers.  The second one defines
    # localhost while the third defines the reverse lookup for localhost.
    #zone "." in {
    # type hint;
    # file "root.hint";
    zone "localhost" in {
    type master;
    file "localhost.zone";
    zone "0.0.127.in-addr.arpa" in {
    type master;
    file "127.0.0.zone";
    zone "sayantan.chakraborty" in {
    type master;
    file "db.sayantan.chakraborty";
    allow-transfer { acl_transf; };
    };

  • Write/Read cluster with ftp and datasocket

    I try to save a cluster to a file on my RT-target from my host machine via ftp and datasocket. I can use the DS examples between host and target but when I connect a cluster to either DS Write or DS Read the VI stops with error 42 (Generic error). The help for DataSocket does not mention any constriction concerning the data type. Is this a bug or a feature?
    I found a workaround by saving the cluster to a local file and transferring this to the RT-target with FTP-VI's but the DataSocket solution would be much simpler.
    LabVIEW 8.6.1
    Attachments:
    clusterDS.jpg ‏24 KB
    Error42.jpg ‏12 KB

    Hi,
    I found the reason for the generic error: the file to write or read has to have a extension "dsd" (or "wav"), otherwise  you'll get the error. With a .dsd extension I was able to save the cluster. I have not yet managed to read it back but at least DS Read does not abort with the generic error. Interesting thing is if you use an other extension than dsd when writing, an empty file is actually created on the target system.
    Attachments:
    DSWriteCluster.vi ‏7 KB
    DSReadCluster.vi ‏10 KB

  • Doubt About FTP And NFS

    Hi Experts,
    1...What is the differnce between FPT and NFS( in Trasport Protocol)
    2...When we wil use FTP and NFS......In which Case
    Please Let me know in detailed
    Regards
    Khanna

    Hi Thanks for ur quick reply.
    As u told
    >>>><i>that the client's system is across ur network and the client is not ready to send u the file. At that time u have to use FTP.</i>
    This is ok.
    Q:::::And For this We should be in the VPN   OR No need?????/
    <i>In scenario where the XI system could store the file on their server (e.g. cases where the organization has their XI in place and they dont want to add an extra FTP server in their scenario, they can directly paste the file on the XI file system). In these cases NFS is used.</i>
    In this case u need to put the file in the XI Server, From where u wil get the file to keep it in the server(means via internet or by hand  or like.....)
    Please let me know all the details
    Regards
    Khanna

  • Passive FTP and the Leopard firewall

    Hi,
    We have an staff upload server that uses the built-in Leopard firewall. It is fed by two proprietary applications, one of which uses passive ftp only. We are getting a small number of incidents where the passive upload is unsuccessful. Initial contact is made (visible in the logs and as a connection in the server admin gui) but the upload doesn't proceed. A user might try uploading several times without success. On other occasions, the same user from the same computer has no problems at all.
    We have the ftp service enabled on port 20-21 and the FTP service PASV port range enabled 49152-65535.
    If I add the uploading computers' ip number to an access group with no port restrictions on the firewall, the uploads are always successful.
    With my very limited knowledge of ftp and firewalls, this suggest that the negotiated port for the data transfer is outside the default port range used by Apple. Is this likely? Are there any implications in changing the range?
    Or am I totally confused and should I be looking elsewhere?
    Thanks,
    Ross Glover

    By default, the FTP server doesn't restrict itself to any particular passive port range. To make it match what the firewall claims it should be, edit the file /Library/FTPServer/Configuration/ftpaccess and add the line:
    passive ports 0.0.0.0/0 49152 65535
    ...then restart the FTP service and retest.

  • Scripting with FTP and HTTP

    Hi All,
    To help us with future planning, we would like to get a feel for how many developers are using the FTP and HTTP objects that are available with scripting in CS3 (through webaccesslib). If you are using them could you send me a quick email describing how you use the component? My email address is [email protected]
    Thanks in advance.
    Alan Morris
    Dev Tech Engineer
    Adobe Systems

    Yeah, this is so aggrevating!
    Adobe builds all of these cool ideas, then doesnt test them.
    The HTTPConnection object does not do POST at all. I have tried nearly every possibility. The documentation is either way off or the object just does not work. I can see the post in raw form and the POST variables are not coming across.
    After working on this for a few hours i thought to myself, hey maybe i should just create a flash pane instead and load the files into it, then have the flash object upload. Well i ran into a big fat wall there too! As it is with patchpanel and bridge, these technologies only accept swf objects. This whole concept of using SWF and crossscripting has a huge flaw. The SWF file's security format does not allow for local file access for doing simple things like upload. If i can't synchronize file data to web based clouds, then i cant do much worth talking about.
    I love these products and their possibilities but i have to have the ability to communicate with the world. HTTP is the way!
    Also a side note, FTP is an insecure/inflexible solution and looks like a lot more time was spent on this aspect of the scriptable product.
    PLEASE HELP ADOBE!!!!!

Maybe you are looking for

  • Suggestion for a New Keyboard Shortcut

    I'd like to suggest a way of increasing the efficiency of editing captions and other metadata in Aperture by adding a keyboard shortcut that always serves to move to the next image in the viewer. For example, Command-Shift-] (or something) to move to

  • IPad 2 Lack of Apple support for Display Issue

    Recently I puchased two Ipad2's and one has a distinct yellowish tinge to all display white areas compared to the othe ipad2.  I realise there is some variability in the displays but this is quite a noticable difference leaving the entire display gen

  • PS Elements 8 - "Save As" PDF File Sizes Huge

    In Photoshop Elements 8.0, Photoshop PDF file sizes are huge when using the "save as" function, using JPEG compression. No matter which "Image Quality" is used, the resultant PDF is huge. At "high" quality the file is 20 MB. At "medium" quality, the

  • Os x lion download interrupted -- corrupted file

    i downloaded os x lion today but i think my download got interrupted. in any case, the app store says i finished downloading and when i tried to install, it said my file was tampered or corrupted and failed to install. how do i redownload it so i can

  • Budget needs to be transfered from Main WBS to Sub WBS Element

    HI, Scenario: Created a Project with Main WBS Element ( eg:0043-VI)and Budgeted on the same in CJ30. Created a PO against 0043 -VI Now i added two more WBS elements under 0043 -vi-st and 0043-vi-fn. I want to allocate the budget on the sub wbs.Alread