FTP can access through URL?

Hello All,
My client wants to access the FTP server through URL.
Which adapter i need to use FILE or SOAP to send or receive the data.
Thanks and Regards,
chinna

Hi,
Please open the FTP port (the one which your FTP service is listenning) of your FTP server for the client-machine IP. Ask them to telnet your FTP server on that particular port...
Regards,
Sugata Basu

Similar Messages

  • Displaying images that are accessed through URL

    Hi,
    I have trouble displaying images that are accessed through URLs in my report.
    If I call the URL directly in the Browser the Image can be opened without problems.
    The images can be accessed with an anonymous access.
    When I deploy the report or in the Preview of Visual Studio I get the following message:
    [rsWarningFetchingExternalImages] Images with external URL references will not display if the report is published to a report server without an UnattendedExecutionAccount or the target image(s) are not enabled for anonymous access.
    In Layout View of Visual Studio the image is showen correctly.
    The Images are stored on a Solaris maschine with WebSphere 6.0 as WebServer.
    Any ideas?
    Thank you.
    Frank
     

     Rain3 wrote:
    * Create a new IIS Virtual Directory pointing to the share:
    ** Open IIS Manager on the reporting server (eg. REPORTSERVER ):
    ** Create a new Virtual Directory (Web Sites --> Default Web Site --> New --> Virtual Directory)
    ** In the Alias prompt, type some name (eg. Pics) and in the Path prompt, specify \\SERVER\imageshare . Other options should be left default.
    * When designing reports, use "http://REPORTSERVER/Pics/somepicture.jpg" as the "Value" property for images.
    I have followed these steps but I still can not get the images to display.
    Our reportserver resides in the directory of another website rather than the default site.  I would assume that I would still follow the same procedure that you have listed but it did not help.
    Does anyone have any other recommendations?

  • But I still can access through lock scre

    I am using IOS 8.2 , sometimes I couldn't access control centre from my home page, but I still can access through lock screen please help me !!

    Morning JJFH,
    Thanks for using Apple Support Communities.
    If after setting up Home Sharing, you cannot access your shared iTunes library over your home network from your Apple TV, take a look at this article:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Best of luck,
    Mario

  • Can TLD jar can access through EAR / APP-INF/lib folder

    Hi All,
    If I have a TLD files into jar file and their specific classes are also into jar file .
    Now can access those jar through EAR file APP-INF/lib folder or else its must to access through WEB-INF/lib folder.
    any pointer will be great.
    Regards,
    Kal.

    I suggest you assume that's how it's supposed to work, and get that to work most efficiently. I have no idea what you were trying to achieve by putting the taglib jar in APP-INF/lib. Perhaps you have multiple webapps and you wanted to avoid multiple instances of the taglib jar? If that's the case, I believe you could use WebLogic "shared application libraries" (I don't think that's the correct term), where you deploy a jar file as an application library, and the weblogic.xml file in each webapp that uses it would specify the name of the application library it uses.

  • Full Strength Airport Network, No Web, Can access through neighbors!

    Simly put, I get full strength from my Airport Express, open system (no WEP or WPA) but it will no go to the web! My MB Pro, MB, iBook, Powerbook all work fine, just the iMac. I can mooch from two of my neighbors open networks (for testing purposes only), I can stream from iTunes, I can log into other computers, only when I go to the web do I have problems.
    I have reset, reinstalled, deleted Airport Prefs, ran AppleJack AUTO, all to no avail. Any ideas would be helpful.
    iMac 17 inch CD   Mac OS X (10.4.9)  

    I've been having problems where at times it was impossible to join the net but, like yourself, adding insult to injury I could connect to an open network with a weak signal and surf at blazing speeds. This thread :
    http://discussions.apple.com/thread.jspa?threadID=911693&tstart=0
    explains my problem I really have found putting the primary DNS server settings into the PrefPanes under the Network System Preferences has helped a great deal.
    It might be worth getting all your advance settings from your ISP and checking these against the settings in your router, also the normal stuff like checking / changing channel on the router etc. I also downloaded and monitor the other networks via iStumbler which has helped too.
    Luke

  • I cannot connect to my earthlink email using Firefox ??? I can access through Safari and have talked with Earthlink. Also, ever since Firefox has changed format, the speed of my service has been diminished. What is going on???

    The page isn't redirecting properly
    Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
    This problem can sometimes be caused by disabling or refusing to accept cookies.

    Hey there Mr. Spock,
    It sounds like you have done most of the troubleshooting in http://support.apple.com/kb/ts2972, and home sharing on one computer. I dont know if you have done this, but I would next check the Firewall settings with that article.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    5. Check Firewall settings
    If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
    In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
    If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
    For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
    Block all incoming connections
    Allow only essential services
    If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
    For more information on ports used by Apple products, see Well known TCP and UDP ports used by Apple software products.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Not able to access the application through URL in clustered environment.

    Hi,
    I recently depoyed my application on clustered environment of weblogic 8.1 SP4.
    Now I am able to access the application through the managed server name with port number but not able to access through URL.
    For ex
    http://machine1:7001/test/login.do?m=begin
    this is accessible
    If I use
    http://test.domain.com/test/login.do?m=begin
    Then application is not accessible.
    any HTML or JSP page page is in reach by both the URL.
    Please suggest me what should I do in this regard.
    thanks
    singhV

    Hi Syed,
    I meant to ask are you able to see the application you created in Hyperion Planning Login page,if yes try accessing the created application through Hyperion Planning(Try restarting Planning Services once even if you are able to launch hyperion planning page) url "http://servername:8300/HyperionPlanning and selecting the application you created.
    And also could you please let me know if you are logging in to workspace through admin username ? and also check if you are able to see the application in shared services and try to provision any group on that application.
    (The Assumptions are if application is not created successfully then it will not be available in workspace to launch and if its in maintainance mode (Application Maintenance Mode) in Application Settings and last would be check OHS and Hyperion Planning Services)
    Thanks
    Amith

  • App icons on screen versus access through app store

    I have apps that I can access through the app store on my Ipad by typing in the name of the app.  The icon does not appear on my screen like the rest of my app icons do.  How do I get them onto my screen so I don't have to go through the app store each time I want to open the app?

    All of the apps you can find with Spotlight Search are on your phone.  You just haven't figured out where they are   First, a "missing" app could be on a screen you're not aware of.  Swipe to the left and check carefully until you have seen all screens.  You can tell how many by the little row of white dots just above the dock (row of icons at the bottom of the screen).  Second, a "missing" app could have accidentally been put into a group.  Look for icons that contain smaller icons.  Tap, and it will open to show you the apps within.  To bring an app out of a group, tap and hold any app until a little red circle with an "x" appears at the top left and the icons begin to shake.  Tap and hold, while you drag the app out of the group.  You can also rearrange your screens this way.

  • How to access Portal URL outside of the LAN

    Hi Experts,
    Our J2EE engine is hosted on one machine and R/3 is installed on other machine (IP address is different). We have configured Web Dynpro ABAP iVIEW's and Transaction iViews in my portal. To be able to access these two iViews I have to maintain the IP addresses of both EP server and R/3 server IP's in every client host file.
    Hence my client system is in LAN it is working with no issues, but we want to access the URL form out of LAN which is not possible at the moment.
    Could anyone please advise me how to access the URL without maintaining the IP address in host file
    and
    able to access the URL out side of the LAN.
    Thanks
    Murthy

    Hi Murthy,
    Directly its not possible at all, For this you need to publish the Portal Server on Internet.
    Once its published on internet  then you can access the URL without maintaining the
    IP address in host file.
    In this your Basis Team and Network team will help you.
    Regards,
    Piyush

  • Error while accessing transaction codes through URL's in IFrame UI element

    Hi Experts,
    I have created Transaction iviews ck91N, ck11N, ck24 in SAP NW CE7.2. I am accessing these Transaction iviews through URL's in webdynpro java application. I am using IFrame UI element in a Roadmap UI for each transaction code.
    when i access step1 i.e ck91N in a IFrame it is working fine then i click button for step2, it displays the following error.
    Error while processing your request!
    What has happened?
    The call of URL http://yyyyyyyy:8001/sap/bc/gui/sap/its/webgui has been terminated due to an error.   
    Note
    ■The following error text was processed in system D10 : A:ITS_P:019 XSRF no sec_sesstoken
    ■The error occurred on application server eccdcs1s_D10_01 and in work process 0 .
    ■The termination type was: ABORT_MESSAGE_STATE
    ■The ABAP call hierarchy was:
    Function: CKML_MGV_SURFACE_DISPLAY of program SAPLCKMLMVSURF
    Function: CKML_MGV_SURFACE_DISPLAY of program SAPLCKMLMVSURF
    START-OF-SELECTION of program CKMLMV_SURFACE   
    What can you do?
    ■In the case of termination type RABAX_STATE, you will find in system D10 in transaction ST22 more information on the cause of termination.
    ■In the case of termination type ABORT_MESSAGE_STATE, you will find on application server eccdcs1s_D10_01 in transaction SM21 more information on the cause of termination.
    ■In the case of termination thype ERROR_MESSAGE_STATE, you can search for more information in the trace file for the work process 0 in transaction ST11 on application server eccdcs1s_D10_01 . An analysis of trace files for other work processes may be necessary.
    ■If you do not yet have any user ID, contact your system administrator.
    Error Code: ICF-IE-http -c: 730 -u: P00004943 -l: E -s: D10 -i: eccdcs1s_D10_01 -w: 0 -d: 20110426 -t: 135905 -v: ABORT_MESSAGE_STATE -e: A:ITS_P:019 XSRF no sec_sesstoken -X: -x:
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Then next step3 it is working fine. If i change Road Map steps Ck11N,ck91N,ck24 in this order then first one is working fine second one gives error and third one is working fine again. It is working alternatively. I don't understand why this is happening? when i use LinkToURL for these 3 URL's then they are working fine. LinkTOURL opens in new browser(window) and in Roadmap i am accessing 3 URL's in same browser(window).
    Regards,
    Pradeep Kumar
    Edited by: pradeep_546 on Apr 26, 2011 2:17 PM
    Edited by: pradeep_546 on May 2, 2011 11:43 AM
    Edited by: pradeep_546 on May 3, 2011 8:02 PM

    I am facing the same issue when I use Windows 7 OS. Did you resolve this issue?

  • Again question about restricting access to files through URL?

    I found many topics about this, but every time it is some special case.
    I want to ask it simple. How can I restrict access to some files in my application through entering URL in Browser, no matter if I am logged or not.
    For example I have included JSP files with jspf extension. I don't want to access them through url. How can I do this?

    May be it will work, but it seems somehow workaround decision - one half of jsp files in one place and another part in other place.
    Message was edited by:
    cheltsov

  • HT1329 if the music that is on the iPod can no longer be accessed through iTunes because it was deleted, is there anyway to recover the music on the iPod if it wasn't purchased?

    if the music that is on an iPod can no longer be accessed through iTunes because it was deleted, is there anyway to recover the music on the iPod if it wasn't purchased?

    See this support article:
    http://support.apple.com/kb/HT1848
    You can also download at least some of your content (audiobooks being a notable exception) again from the iTunes Store:
    http://support.apple.com/kb/ht2519
    For additional instructions, particularly for content not purchased from the iTunes Store, check out this user tip from TuringTest:
    https://discussions.apple.com/docs/DOC-3991
    and this page on "How-to Geek":
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    "Where do I find my hundreds of dollars of downloads I have done since 2005?"
    They will only be where you put them  If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
    The itunes store is not global at all, never has been. You cannot redownload your content from another country.  You can only use the countrys itunes store for the country that you are physically located.

  • Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

    Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

    Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
    Yes, if you are asking about using Time Machine to backup the Mac.
    Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
    You are not thinking of deleting the photos and files on your Mac, are you?  If you do this, you will have no backups for those files.
    Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
    In other words, only delete files from your Mac that you can afford to lose.

  • I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!

    I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!

    Hi Sig,
    The issue is that i only want the shared folders to be accessed through windows 7.
    Whats the point otherwise to have shared folders?
    thanks..

Maybe you are looking for