FTP-client behind RRAS - unable to connect to external FTP servers

FTP-client behind RRAS - unable to connect to external FTP servers
A small network (10-20PCs) without any segmentation - one LAN with one Gateway.
1. If the Gateway is some small hardware device, there are not any problems to make FTP-connections from LAN to Internet FTP-servers
2. If the Gateway is Win2003+RRAS+NAT or Win2003+ISA2005, there are not any problems to make FTP-connections from LAN to Internet FTP-servers
3. But if the gateway is Win2008+RAS+NAT or Win2012+RRAS+NAT, the computers in the LAN are not able to connect to Internet FTP-servers
I made a few tests:
1. On Win2012+RRAS+NAT
TurnOff Windows Firewall for All profiles (Domain, Private, Public) - the problem disappears, it it possible to connect to external Internet FTP-servers.
2. On Win2012+RRAS+NAT
TurnOff Windows Firewall only for Domain profile - the problem disappears, it it possible to connect to Internet FTP-servers.
3. On Win2012+RRAS+NAT
TurnOn Windows Firewall for All profiles (Domain, Private, Public)
But I excluded the Internal NIC in this list
Windows Firewall / Properties / Domain Profile / Protected network connections
and the problem disappears again
My question is:
What new Firewall rule I have to make and where to place it (to be able to make FTP-connection from LAN to Internet FTP-servers)?
I made some attempts to allow port21, but any success.

Thank you, but did you try this ?
Can you describe in detail "exclusion rule for FTP traffic" ?!
In my previous post, I want to say that if you use Win 2008/2012 RAS+NAT as a network gateway, than it is not possible to make FTP-connections to external FTP servers from the computers behind that gateway.
And the standard attempts to make "Allow"-rules for port 21 in the gateway firewall (Win 2008/2012), do not solve the problem.
No matter which FTP-client you can try to use.
To see this problem, just make few simple tests:
">telnet <ftp-server> 21"
with firewall on/off and inbound/outbound "Allow port 21 rule (All/Domain/Private/Public)"
In my country, the Government Tax Department uses FTP-protocol to collect monthly data from companies.
And it is too stupid scenario (to be a small company and to) upgrade from Win 2003 to a newer 2008/2012 and than to not be able to make all your jobs.
-------EDIT---------
The same problem (and its solution) is described here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0c68aed6-e22b-4cd4-86bd-f3c767e88349/advanced-firewall-blocking-through-ftp-traffic-rras
The magic command:
">netsh routing ip nat delete ftp"
solved the problem for me.
And here is the description of this command - "Disables the FTP proxy on the NAT server."
http://technet.microsoft.com/en-us/library/cc754535(v=ws.10).aspx#BKMK_106

Similar Messages

Since updating to Firefox 23.0.1, I am unable to connect to our company servers.

Since updating to Firefox 23.0.1, I am unable to connect to our company servers. The error message is "Certificate type not approved for application.", and it gives me no option to create an exception.
In previous versions, Firefox gave the option of creating a security exception, and then everything worked as expected. The new version does not give this option, and hence I cannot connect to our company servers.
I can connect using Explorer, Opera, Chrome, etc., without any problems. Only Firefox refuses to connect.
Please advice.

The issue is not with SSL or TLS. The issue is with Firefox.
Thanks for all the helpful suggestions, but this is clearly a bug in Firefox, where the ability to create a security exception has been disabled in this case.
Other browsers, as well earlier versions of Firefox, allow security exceptions to be created, which completely solves the issue.
How do I go about reporting this bug?

RV042 behind P660 unable to connect to the internet

Hi,
I am a bit new to setting up dual wan router. I am currently having a Zyxel P660 Adsl router but rv042 is unable to connect to the internet as zyxel doesn't give it a I.P address. Thank you guys in advance.

Hello Rashmin,
I am not that familair with the P660 but from looking over Zyxel's website it looks like a modem/router combo.
Is it possible to place the Zyxel into bridged mode, so that it only acts as a ADSL router and passes the public IP on to the RV042? You may need to call your ISP to have them do this for you.
When you are in bridged mode you will also probably have to configure the RV042's WAN port as a PPPoE connection and enter your ISP's credentials, so make sure they give you this when you speak to them about bridged mode.
With some routers it is possible to plug in another router behind them and everything sort of works. This is called a double NAT situation, and does prevent VPN from working. However not even that is working here so I would definitely see about getting that modem into bridged mode. Some ISPs also call it IP passthrough or one-to-one NAT, just tell them you want a public IP on your RV042's WAN port.
Thank you for choosing Cisco,
Christopher Ebert - Network Support Engineer
Cisco Small Business Support Center
*please rate helpful posts*

Unable to connect the external program.

Hi Experts,
We have schedule one job which run everyday. This job execute one external program.
Now, this job get canceled everyday and the error is Unable to connect to target host
Failed to start external program. The job log is as follows.
Date               Time     Message text                                            Message class Message no. Message type
15.10.2009 04:40:20 Job started                                                              00          516          S
15.10.2009 04:40:20 Step 001 started                                                     BT          611          S
15.10.2009 04:40:20 External program: /interface/scripts/zgrm002.sh   BT          612          S
15.10.2009 04:40:20 Related parameter:                                                 BT          613          S
15.10.2009 04:40:49 Unable to connect to target host                            BT          619          I
15.10.2009 04:40:49 Failed to start external program                             BT           605          A
15.10.2009 04:40:49 Job cancelled                                                         00           518          A
Can anybody have the idea how to resolve this problem.
Thanks in Advance.
Abhishek.

Hi,
The host serevr details may be changed. Please check with the respective team for the proper host details.
Check this link. It may help:
Re: Regarding Providing FTP connection from R/3
Regards,
Swarna Munukoti
Edited by: Swarna Munukoti on Oct 16, 2009 8:17 AM

I'm unable to connect to any AOL servers using Mail. Other computers, iPhone, iPad all connect successfully.

Hello everyone,
     I have been working with AOL for about three months now with no end in sight. I purchased a MacBook Pro in late September and attempted to use Mail (later Outlook with the same results) to download my Gmail and AOL email. I confirmed all the settings were correct for both accounts and began downloading email. Once completed, I noticed only my Gmail had downloaded and AOL stated it was unable to connect to any of the servers. I engaged AOL and they've been making me try random ports, deleting profiles, etc. Nothing was worked.
     I am looking here in hopes someone knows something since I'm able to access AOL email via the web, using my iPhone's Mail app, my iPad's mail app, and two of my Windows laptops. Only my MacBook Pro with Retina Display (Mid-2012) has issues. I'm running Mountain Lion 10.8.2 with all updates.
     Tried using telnet but get "connection refused". No firewalls are running. I thought maybe it was the OS itself so I installed Office 2010 on Windows 7 in Fusion and Outlook gives me "an encrypted connection to your mail server is not available". This is a clean install with no firewalls, AV, nothing.
In both Windows on Fusion and my Mountain Lion, Outlook and Mail successfully connect to Gmail's IMAP servers but fail to connect to AOL's POP or IMAP servers.
Any ideas?
Thank you in advance.

Thanks for this.
Before I see your suggestion, I did it below that worked well:
- SIgn off the Mac App store (if you were signed in with another Apple ID)
- Leave the Mac App store open
- Quit iTunes and iBooks if they are running
- Open Safari, and go to Preferences/Privacy
- Choose to block cookies "Always"
- Click on "details" under "Remove all website data ..."
- Search for apple.com; select the "apple.com" line then click "Remove", then click "Done"
- Quit Safari
- Open Activity Monitor (search for it using Spotlight or find it in the Applications/Utilities folder)
- In Activity Monitor, search for "storeagent". You should find "storeagent" and possibly "ibookstoreagent"
- Select each of them and force quit them (using the X in the toolbar if you are using Mavericks)
- In the Finder, go to the ~/Library/Cookies folder (go to ~/Library using the "Go" menu while pressing Alt then open the Cookies folder)
- Delete   "com.apple.appstore.cookies"   and empty the trash.
- Go to the Mac App Store and sign in. This should work. You can press Esc if asked for your username and password a second time.
- Go to Safari, then Preferences/Privacy
- Choose to block cookies "from third parties and advertisers"
- Go back to the Mac App Store. You should be able to use it "normally".
Some steps might be overkill, but it seems to work for me now.
Anyway, thanks!!

Unable to connect to external hard drive

Have just switched from a macbook to macbook pro, transferred all data etc via firewire with no problem. I have recently purchased an extreme base station and have ben using this with an imac and the mac book. I have a usb external drive and a printer connected to the base station via a usb hub. Both have worked flawlessley over the wireless network with the macbook. However, I can't get the new macbook pro to see the external hard drive, I have checked the automatically mount disk box etc, all to no avail.
Any ideas??

I have successfully connected two drives via a USB HUB, which worked flawlessly. I am however unable to connect another drive of a different brand and size and get it to be recognized. That drive is a Lacie bid drive ( 2 terabytes). It looks like the drive itself is an important factor. I tried every thing and this big drive would not mount.

Web service client behind a proxy server connecting to web service over SSL

Hi Friends,
A web service is exposed by an external system over SSL. We are behind a proxy server and are trying to get connected to web service over SSL. 
We are getting the following error on the test browser of workshop
External Service Failure: FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters.
the whole trace is 
JDIProxy attached
<Sep 24, 2005 9:27:25 AM EDT> <Warning> <WLW> <000000> <Id=creditCheckCtrl:salesExpertServiceControl; Method=creditcheckcontr
ol.SalesExpertServiceControl.doCreditVerification(); Failure=com.bea.control.ServiceControlException: SERVICE FAULT:
Code:javax.net.ssl.SSLHandshakeException
String:FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters
Detail:
END SERVICE FAULT>
<Sep 24, 2005 9:27:26 AM EDT> <Warning> <WLW> <000000> <Id=creditCheckCtrl; Method=creditcheckcontrol.CreditCheck.testCreditC
heck(); Failure=com.bea.control.ServiceControlException: SERVICE FAULT:
Code:javax.net.ssl.SSLHandshakeException
String:FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters
Detail:
END SERVICE FAULT [ServiceException]>
<Sep 24, 2005 9:27:26 AM EDT> <Warning> <WLW> <000000> <Id=top-level; Method=processes.CreditCheck_wf.$__clientRequest(); Fai
lure=com.bea.wli.bpm.runtime.UnhandledProcessException: Unhandled process exception [ServiceException]>
<Sep 24, 2005 9:27:26 AM EDT> <Error> <WLW> <000000> <Failure=com.bea.wli.bpm.runtime.UnhandledProcessException: Unhandled pr
ocess exception [ServiceException]>
I am not able to make out what could be possibly wrong. Please let me know if you guys have any ideas about how to resolve it.
Thanks
Sridhar

did you resolve this problem. I am looking at the same issue. If you did I would really appreciate your response.
Thanks.

Domain Group Policy changes causes clients to be unable to connect to WSUS for Windows Updates

Domain Controller is Windows Server 2008 R2 64-bit, Group Policy Management version 6.0.0.1. WSUS server is Windows Server 2008 Enterprise 32-bit, Update Services version 3.2.7600.226. Client machines are Windows 7, some are 64-bit and some are 32-bit.
Every time we make any changes to any of our Group Policies most of our clients stop getting their Windows Updates from the WSUS server within 2-3 days. This occurs when we add a new policy for a group of users, temporarily disable a policy or edit a policy.
Check of the WindowsUpdate.log on affected client machines shows:
2014-06-25 13:40:44:976 760 1610 PT WARNING: GetAuthorizationCookie failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2014-06-25 13:40:44:977 760 1610 PT WARNING: Failed to initialize Simple Targeting Cookie: 0x80072ee2
2014-06-25 13:40:44:977 760 1610 PT WARNING: PopulateAuthCookies failed: 0x80072ee2
2014-06-25 13:40:44:977 760 1610 PT WARNING: RefreshCookie failed: 0x80072ee2
2014-06-25 13:40:44:977 760 1610 PT WARNING: RefreshPTState failed: 0x80072ee2
2014-06-25 13:40:44:977 760 1610 PT WARNING: PTError: 0x80072ee2
2014-06-25 13:40:44:977 760 1610 Report WARNING: Reporter failed to upload events with hr = 80072ee2.
A further check of the log files shows:
2014-06-21 19:36:06:995 156 1b0c Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <proxy server name:8080> Bypass List used : <(null)> Auth Schemes used : <>
We do not use a proxy except for Internet connections. We configure IE with a pac file. This is set through Group Policy since we restrict user accounts from being able to set it.
The clients that are connecting to the WSUS server have these entries instead:
2014-06-24 09:12:16:779 992 270 Agent Setting download properties on call A20329BC-3467-4B7E-B9F4-6AC6ACBA23E1: priority=3, interactive=1, owner is system=0, proxy settings=1, proxy session id=2
I have a routine that will fix the problem but it is time-consuming and pulls me away from other things I should be doing:
Run registry files on client machine (WindowsUpdate and AU) This is not always necessary and is already set by Group Policy and the affected clients already have the registry settings. No idea why it is necessary to do but it the steps below don't always
work unless it is.
netstop bits and netstop wuauserv
ipconfig /flushdns
Delete qmgr*.* files from Downloader folder
Delete Software Distribution folder
Run from command prompt:
sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
netstart bits and netstart wuauserv
wuauclt /resetauthorization /detectnow
Run Windows Updates again from Control Panel
This routine always fixes the problem but I've found that I must do each step to guarantee success.
How or where is the proxy setting being changed for WSUS that we see in the WindowsUpdate logs and how do I prevent this from happening? It is also curious that it happens to most but not all of the client machines. When it does happen it's not always the
same client machines.

You're right - the WSUS server is on the inside and does not need a proxy server. Tried running the netsh winhttp reset proxy command but was still not able to connect to the WSUS server. After running the netsh winhttp reset proxy command received response:
Current WinHTTP proxy setting: Direct access <no proxy server>.
Ran the command at 13:49 and then tried Windows Updates again. Here's snippet from the log file:
2014-06-27 13:49:56:889 548 f6c AU Triggering AU detection through DetectNow API
2014-06-27 13:49:56:890 548 f6c AU Triggering Online detection (interactive)
2014-06-27 13:49:56:890 548 4b8 AU #############
2014-06-27 13:49:56:890 548 4b8 AU ## START ## AU: Search for updates
2014-06-27 13:49:56:890 548 4b8 AU #########
2014-06-27 13:49:56:893 548 4b8 AU <<## SUBMITTED ## AU: Search for updates [CallId = {9CE06AB2-E859-4B4D-8D1A-193AD89623C5}]
2014-06-27 13:49:56:893 548 1260 Agent *************
2014-06-27 13:49:56:893 548 1260 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-06-27 13:49:56:893 548 1260 Agent *********
2014-06-27 13:49:56:893 548 1260 Agent * Online = Yes; Ignore download priority = No
2014-06-27 13:49:56:893 548 1260 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-06-27 13:49:56:893 548 1260 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-06-27 13:49:56:893 548 1260 Agent * Search Scope = {Machine}
2014-06-27 13:49:56:893 548 1260 Setup Checking for agent SelfUpdate
2014-06-27 13:49:56:893 548 1260 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-06-27 13:49:56:894 548 1260 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-06-27 13:49:56:901 548 1260 Misc Microsoft signed: Yes
2014-06-27 13:49:56:927 548 1260 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-06-27 13:49:56:934 548 1260 Misc Microsoft signed: Yes
2014-06-27 13:49:56:936 548 1260 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-06-27 13:49:56:943 548 1260 Misc Microsoft signed: Yes
2014-06-27 13:49:56:956 548 1260 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-06-27 13:49:56:962 548 1260 Misc Microsoft signed: Yes
2014-06-27 13:49:56:974 548 1260 Setup Determining whether a new setup handler needs to be downloaded
2014-06-27 13:49:56:974 548 1260 Setup SelfUpdate handler is not found. It will be downloaded
2014-06-27 13:49:56:974 548 1260 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-06-27 13:49:56:976 548 1260 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-06-27 13:49:56:976 548 1260 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-06-27 13:49:56:989 548 1260 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-06-27 13:49:56:989 548 1260 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-06-27 13:49:57:007 548 1260 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-06-27 13:49:57:007 548 1260 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-06-27 13:49:57:165 548 1260 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-06-27 13:49:57:165 548 1260 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://(FQDN of WSUS server)/ClientWebService/client.asmx
2014-06-27 13:49:57:175 548 1260 PT WARNING: Cached cookie has expired or new PID is available
2014-06-27 13:49:57:175 548 1260 PT Initializing simple targeting cookie, clientId = 6be4a1ae-3313-4855-bdb1-57e3312f03ec, target group = AGENCIES, DNS name = dpk2.clear-rcic.rcc.org
2014-06-27 13:49:57:175 548 1260 PT Server URL =
http://(FQDN of WSUS server)/SimpleAuthWebService/SimpleAuth.asmx
2014-06-27 13:50:57:280 548 1260 Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(proxy server):8080> Bypass List used : <(null)> Auth Schemes used : <>
2014-06-27 13:50:57:281 548 1260 PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2014-06-27 13:50:57:281 548 1260 PT + Caller provided proxy = No
2014-06-27 13:50:57:281 548 1260 PT + Proxy list used = webgate.rcc.org:8080
2014-06-27 13:50:57:281 548 1260 PT + Bypass list used = <NULL>
2014-06-27 13:50:57:281 548 1260 PT + Caller provided credentials = No
2014-06-27 13:50:57:281 548 1260 PT + Impersonate flags = 0
2014-06-27 13:50:57:281 548 1260 PT + Possible authorization schemes used =
2014-06-27 13:50:57:281 548 1260 PT WARNING: GetAuthorizationCookie failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2014-06-27 13:50:57:281 548 1260 PT WARNING: Failed to initialize Simple Targeting Cookie: 0x80072ee2
2014-06-27 13:50:57:281 548 1260 PT WARNING: PopulateAuthCookies failed: 0x80072ee2
2014-06-27 13:50:57:281 548 1260 PT WARNING: RefreshCookie failed: 0x80072ee2
2014-06-27 13:50:57:281 548 1260 PT WARNING: RefreshPTState failed: 0x80072ee2
2014-06-27 13:50:57:281 548 1260 PT WARNING: Sync of Updates: 0x80072ee2
2014-06-27 13:50:57:281 548 1260 PT WARNING: SyncServerUpdatesInternal failed: 0x80072ee2
2014-06-27 13:50:57:281 548 1260 Agent * WARNING: Failed to synchronize, error = 0x80072EE2
2014-06-27 13:50:57:282 548 1260 Agent * WARNING: Exit code = 0x80072EE2
2014-06-27 13:50:57:282 548 1260 Agent *********
2014-06-27 13:50:57:282 548 1260 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-06-27 13:50:57:282 548 1260 Agent *************
2014-06-27 13:50:57:282 548 1260 Agent WARNING: WU client failed Searching for update with error 0x80072ee2
2014-06-27 13:50:57:302 548 e04 AU >>## RESUMED ## AU: Search for updates [CallId = {9CE06AB2-E859-4B4D-8D1A-193AD89623C5}]
2014-06-27 13:50:57:302 548 e04 AU # WARNING: Search callback failed, result = 0x80072EE2
2014-06-27 13:50:57:302 548 e04 AU # WARNING: Failed to find updates with error code 80072EE2
2014-06-27 13:50:57:302 548 e04 AU #########
2014-06-27 13:50:57:302 548 e04 AU ## END ## AU: Search for updates [CallId = {9CE06AB2-E859-4B4D-8D1A-193AD89623C5}]
2014-06-27 13:50:57:302 548 e04 AU #############
2014-06-27 13:50:57:303 548 e04 AU Successfully wrote event for AU health state:0
2014-06-27 13:50:57:303 548 e04 AU AU setting next detection timeout to 2014-06-27 22:50:57
2014-06-27 13:50:57:304 548 e04 AU Setting AU scheduled install time to 2014-06-28 05:00:00
2014-06-27 13:50:57:304 548 e04 AU Successfully wrote event for AU health state:0
2014-06-27 13:50:57:305 548 e04 AU Successfully wrote event for AU health state:0
2014-06-27 13:51:02:285 548 1260 Report REPORT EVENT: {BD25B39C-6570-454C-A046-AF3AF2DEBDD4} 2014-06-27 13:50:57:282-0400 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80072ee2 AutomaticUpdates Failure Software
Synchronization Windows Update Client failed to detect with error 0x80072ee2.
2014-06-27 13:51:02:295 548 1260 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-06-27 13:51:02:295 548 1260 Report WER Report sent: 7.6.7600.256 0x80072ee2 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2014-06-27 13:51:02:295 548 1260 Report CWERReporter finishing event handling. (00000000)
2014-06-27 13:51:48:184 548 4b8 AU ########### AU: Uninitializing Automatic Updates ###########
2014-06-27 13:51:48:187 548 4b8 DnldMgr FATAL: DM:CBitsJob::SetCallbackHandler: SetNotifyInterface failed with 0x80080008.
2014-06-27 13:51:48:187 548 4b8 DnldMgr FATAL: DM:CBitsJob::SetCallbackHandler: SetNotifyInterface failed with 0x80080008.
2014-06-27 13:51:48:187 548 4b8 DnldMgr FATAL: DM:CBitsJob::SetCallbackHandler: SetNotifyInterface failed with 0x80080008.
2014-06-27 13:51:48:187 548 4b8 DnldMgr FATAL: DM:CBitsJob::SetCallbackHandler: SetNotifyInterface failed with 0x80080008.
2014-06-27 13:51:48:187 548 4b8 Report CWERReporter finishing event handling. (00000000)
2014-06-27 13:51:48:252 548 4b8 Service *********
2014-06-27 13:51:48:252 548 4b8 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-06-27 13:51:48:252 548 4b8 Service *************
2014-06-27 13:51:53:002 548 160c Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-06-27 13:51:53:002 548 160c Misc = Process: C:\Windows\system32\svchost.exe
2014-06-27 13:51:53:002 548 160c Misc = Module: c:\windows\system32\wuaueng.dll
Ran a batch file which resets the AU and WindowsUpdate registry keys and then runs the steps listed above:
regedit /s C:\WindowsUpdate.reg
regedit /s C:\AU.reg
net stop bits
net stop wuauserv
Ipconfig /flushdns
del C:\ProgramData\Microsoft\Network\Downloader\qmgr*.*
del /F /Q C:\Windows\SoftwareDistribution\*.*
sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
net start bits
net start wuauserv
wuauclt /resetauthorization /detectnow
After this runs, am able to connect to WSUS server for updates. I mentioned Group Policy changes because this only breaks after the Group Policy changes. It doesn't affect every client machine but most of them. Was wondering how the proxy gets reset from
none to the proxy server for Windows Updates?

[SOLVED] Unable to connect via an ftp cable with my acer Laptop

Hello there everyone!
I can't connect to the internet.Although i installed via ftp the packages and i could successfully ping google.After i installed gnome 3 i can't ping anything.
I need your help!I have Laptop connected to my router with an ftp cable,my desktop ubuntu pc works fine with the internet,but after reading again and again this two guides :
https://wiki.archlinux.org/index.php/Be … cessary.29
https://wiki.archlinux.org/index.php/Network
nothing seems to work!Could someone please help me?
Last edited by sepuku (2011-06-04 01:22:46)

You should check settings in NetworkManager as well, since your settings broke after installing Gnome 3 that seems like a possible culprit.
Generally off topic:
Just as a small note, there is such a thing as a FTP cable, though it is also sometimes written as F/UTP due to newer standards names. Basically it is a TP cable where the cables in it are wrapped in foil, hence the name Foiled Twisted Pair. This gives shielding from interference like magnetic fields unlike a UTP cable which is an Unshielded TP cable. There are also several other cable shielding standard names.
http://en.wikipedia.org/wiki/Twisted_pa … _shielding

I am unable to connect to the Adobe Servers? All info is current and I have internet connection

I keep receive this error message when I try to open any InDesign files:
"We're sorry, but we're not able to connect to the Adobe Server right now. Please click here to troubleshoot any connectivity problems. If this problem persists please contact Customer Support" etc
I don't know why I can't connect to the Adobe server and am not savvy enough to be able to adjust the hosts servers as it suggests.
For reference I have a month to month InDesign subscription.
Thanks so much!

If you expect to use a WiFi only iPad it needs a wireless network. It is customary to have your own versus using someone else's.
Nothing is more network friendly than an iPad.
You couldn't possibly have expected to sponge off a service someone else is paying for?
read the fine print

Unable to connect Seagate External HDDs to Airport Extreme

Worked the first time I connected my 2 Seagate drives (via the Belkin USB hub from the Apple Store). Now claims that the "disk needs repair" when in truth there is nothing wrong with either of them, and they work perfectly connecting directly to any Mac or PC. Any ideas/suggestions?

have you partitioned the hard drives? AEBS cannot
recognize partitioned hard drives attached to its USB
port. Must be single drive.
My experience is that multiple partitions are not a problem. I'm having no trouble with two partitions on an old Maxtor OneTouch. Each partion shows up.
MacBook Pro Mac OS X (10.4.9)

Versamail issue - unable to connect to sbcglobal email servers

I am attempting to access my sbcglobal email account. I believe I have everything set up correctly, but I continue to receive the following error message: "There is a delay in server communication causing a timeout. Please try again." It appears that I am connecting to the mail server successfully, but I don't get any farther than that. Does anyone know what I may be doing wrong?
Post relates to: Palm TX

I recall SBC/Yahoo DSL recently changed the port settings for their email servers. Check the website and make sure you have the correct ones set in VersaMail.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Why is my phone unable to connect to the email servers since upgrading to 7.1?

I had no problems just prior to installing 7.1, but now I do. I've shut down and restarted my phone several times and the problem persists. Help!

So, here's the final outcome...it seems that the guest WiFi at my employer does not allow us to access gmail! (OK, this is an assumption but I decided to disconnect from the WiFi and was able to access gmail with no problem!). Thank you all for your suggestions!

Does the Built-in Windows FTP Client Support a Secure Connection?

I have set up Server 2008 IIS w/ FTP. I set the SSL setting to require a secure connection. However, I can't connect to the FTP server from the built-in Windows FTP client. I CAN get it to work in FileZilla after modifying my connection properties.
Does the built-in Windows FTP client support secure connections? I received a request to set this up so our internal employees can share files with external customers. Many times our customers are unable to install any kind of third party software on their
computers.
Thanks in advance for the help.

Hi,
Based on my known, the built-in FTP client does not support secure connections.
Similar thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9500d7c2-cf18-4ab1-a0cb-1e277deab33c/is-it-possible-to-connect-to-iis-75-sslrequired-ftp-site-via-windows-explorer-or-ie-?forum=winserverNIS
If it does not help, you could ask in IIS forums as Meinolf Weber mentioned.
Hope this helps.
Regards.
Vivian Wang

Remote Desktop Connection Client 9.3.9600 unable to connect to Server 2012 RDS via Gateway

Hi,
I have a Windows Sever 2012 R2 RDS environment with two Gateways servers configured in high availability mode (RD Web Access, RD Gateway, RD Connection Broker roles installed) and four Windows Server 2012 R2 RDS Session Hosts. The servers are all running
the most recent public server updates. With this configuration I when connecting externally using a Windows 7 computer with the older Remote Desktop Connection client (6.1.7601) I am able to connect without any problems however when I try connecting with a
newer client from a computer running Windows 8.1 and the 9.3.9600 client I am unable to connect.
At the moment a NAT rule is configured to pass 80/443 traffic to only one of the RDS gateway servers, I've removed our load balancer from the configuration for the moment to reduce the complexity.
No error is generated by the client when it tries to connect it just stops trying to connect after a while.
On the Gateways servers event logs for
Things I have looked into so far.
- I've double and triple checked the RDS configuration and checked it against one of my other clients configurations that is working and they are identical.
- Connecting from an older client version works fine.
I'm not sure what else can be checked does anyone have any ideas?

Hi,
1. What entries are you seeing in the RD Gateway's log? Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-Gateway
2. How come you are not forwarding UDP port 3391 in addition to TCP port 443? It should work without UDP, but you will not have UDP support which is one of the benefits of RDP 8.0/8.1.
3. Are there any non-default group policy settings being applied to the servers and/or client PCs? To be clear, I'm asking if any changes have been made to the default local and domain security policies, group policy objects, new GPOs that may have
been added, etc., that are applicable to the servers and or client PCs.
-TP

FTP-client behind RRAS - unable to connect to external FTP servers

Similar Messages

Maybe you are looking for