FTP Connection Parameters
Hi All,
1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.
2) What is the purpose of Context Object and in which situation we will use this.
3) What is the purpose of Fault Message Types and in which situation we will use this.
4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.
Kindly look into the above points and respond point by point.
Regards,
Venkat
Venkat,
Ans1: If you want to make the Name field as mandatory give the occurrences as <b>1..1</b>
Ans 2: Refer Context object
Ans 3: Guide for Fault Message Type
Fault Message Type
Ans 4: FTP - U must check with your basis team whether u have FTP server. If they have get the details from them. If they don't then install tools like WSFTP Pro etc, and give the connection details in the comm.channel
http://www.ipswitch.com/Products/WS_FTP/
What is FTP:http://en.wikipedia.org/wiki/FTP
Best regards,
raj.
Similar Messages
-
Server Name in FTP Connection Parameters
Hello
When I specify IP Adrress for Servername in FTP Connection Parameters it works fine. Is it possible to give Hostname or URL for the parameter servername. If this is not possible is there anyway that we could pass Hostname or URL instead of IP Address.
Thanks
NagaHi Naga
Hostname will work. just you need to take care about the DNS resolution of that hostname. If the host name is not resolved by DNS then it will not work
Thanks
Gaurav -
File has to pass through FTPS connection.. Connection parameters?
Hi,
I want to transfer the file through FTPS connection. Partner side provided the following details as connection parameters.
- IP : 129.32.169.140
- POrt: 990
User name
Password
PASV mode
SSL Direct, OpenSSL,SSL Listing, SSL Transfers.
Kindly let me know what are all the parameters I need to pass in Receiver file adapter.
FTP Connection Parameters:
Server
Port
Data connection: Passive
Connection Security: FTPS for control connection or FTPS for control and Data connection.???
Command Order : ?????
Please let me know what are the security and command order parameters I need to use in Receiver file adapter.
They didn't provide any certificates.
Thanks
Deepthi.Hi Rajesh,
The message is not even failing.. It is in the status of "Delivering". The below are the logs from adapter and Messaging system.
File Adapter Log:
Success Message successfully received by messaging system. Profile: XI URL: http://xi-dev.intranet.XI.com.au:50200/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
Success Message successfully put into the queue.
Success The message was successfully retrieved from the receive queue.
messaging system log:
Message ID 44b756da-d9bd-42e2-3136-e34d75adfe03
Message Type Asynchronously Received Message (RECEIVE)
From Service Name: BS_1
To Service Name: BS2
Action Namespace http://XI.com/SAP_PI/ControlData Name: BYPASS
Connection Name File_http://sap.com/xi/XI/System
Status Delivering
Error Category
Error Code
Profile XI
Transport HTTP
Delivery Semantics Exactly Once
Times Failed 0
Number of Retries 3
Sent / Received 09/09/2009 11:22:52
Transmitted / Delivered 09/09/2009 11:22:53
Next Delivery 09/09/2009 11:22:53
Persist Until 10/09/2009 11:22:52
Valid Until 01/01/1970 10:00:00
Retry Interval 5 Minutes
Address http://xi-dev.intranet.XI.com.au:50200/MessagingSystem/receive/AFW/XI
Transport Headers authorization=Basic UElJU1VTRVI6dDFhbTRyaWE= Content-Length=3010 accept-encoding=gzip sap-xi-messageid=44B756DAD9BD42E23136E34D75ADFE03 content-length=3024 host=xi-dev.intranet.XI.com.au:50200 user-agent=SAP Web Application Server (1.0;700) content-type=multipart/related;boundary=SAP_4AA4E14330050131E10080000A722149_END;type="text/xml";start="" HTTP=POST soapaction="http://sap.com/xi/XI/Message/30"
Principal Propagation -
File selection sequence in the FTP connection for File Sender Adapter
Hi,
I have a file to Proxy scenario using FTP connection parameters.
If there are multiple files in the sender folder, XI picks up the files randomly with no processing sequence.
I want XI to pick up the files based on the date time stamp meaning the oldest file created in the folder should be processes first and rest all in sequence there after.
I know processing sequence can be set for NFS connection but not for FTP .
Please suggest if there's any way to make this work.
Thanks in advance.
Thanks and Regards,
Amit Bhagwat.
Edited by: Amit Bhagwat on Nov 4, 2009 5:17 AMHi
For the Transport Protocol "File Transfer Protocol (FTP)" files are always processed in ascending alphabetical order
If you want the file to be processed in sequence then you can use Quality of Service EOIO in the sender adapter.
The files are processed in the sequence they are picked up.
otherwise use BPM for File Sequencing..
Refer the following Threads
FTP Sender Adapter - Processing Sequence
Processing Sequence issue of FTP protocol
Regards
Abhijit
Edited by: Abhijit Bolakhe on Nov 4, 2009 10:32 AM -
HI ...
In File to File scenarion In FTP connection Parameters how to find the server IP address
venkateshHi
It is set in your File/FTP commn channel.
Open & check.
Rgds -
FTP CONNECTION PARAMETER, SERVER & PORT
HI m new to xi,
i m working with file to file scenario. while creating the sender communication channel for file adapter for the FTP connection parameters, what to give for the server.
i dont know my server ip address. m having my own system.
i installed guideFTPD to my OS (windows server). i dont know the ip adress, can any one tell me how to know the server IP address.
i searched in SDN but i didnt find.
points rewards
thanks in advance
munnaHi,
If you are just doing it for testing then you can also go for NFS mode in your File Adapter which will allow you to pick and drop the file on your XI servier directory. The directory can be seen by using the tcode AL11.
But if you have any specific reason to use FTP adapter then you can go ahead and as suggested above you can find the ip address.
Probably if you go through this link before configuring your adapter then it will help you a lot..
http://help.sap.com/saphelp_nw04/Helpdata/EN/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Regards,
Sarvesh -
ABAP to FTP connect to non SAP UNIX system
Greetings~
I'm looking for a way (via function modules and/or BAPI) to transfer data in flat files from an SAP UNIX system to a non-SAP UNIX system using an ABAP program. I see FM's FTP_CONNECT and FTP_COMMAND however these seem to only work with UNIX systems running SAP as they require RFC_DESTINATION information. Anybody know which (if any) FM's can be used without the necessity of the target system running SAP/RFC?
Thanks!Hi Joseph,
Please refer the below program.
REPORT ZHR_T777A_FEED.
tables: t777a. "Building Addresses
Internal Table for Building table.
data: begin of it_t777a occurs 0,
build like t777a-build, "Building
stext like t777a-stext, "Object Name
cname like t777a-cname, "Address Supplement (c/o)
ort01 like t777a-ort01, "City
pstlz like t777a-pstlz, "Postal Code
regio like t777a-regio, "Region (State, Province, County)
end of it_t777a.
Internal Table for taking all fields of the above table in one line
separated by |(pipe).
data: begin of it_text occurs 0,
text(131),
end of it_text.
Constants: c_key type i value 26101957,
c_dest type rfcdes-rfcdest value 'SAPFTPA'.
data: g_dhdl type i, "Handle
g_dlen type i, "pass word length
g_dpwd(30). "For storing password
Selection Screen Starts
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE TEXT-001.
parameters: p_user(30) default 'XXXXXXX' obligatory,
p_pwd(30) default 'XXXXXXX' obligatory,
p_host(64) default 'XXX.XXX.XX.XXX' obligatory.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE TEXT-002.
parameters: p_file like rlgrap-filename default 't777a_feed.txt'.
SELECTION-SCREEN END OF BLOCK blk2.
Password not visible.
at Selection-screen output.
loop at screen.
if screen-name = 'P_PWD'.
screen-invisible = '1'.
modify screen.
endif.
endloop.
g_dpwd = p_pwd.
Start of selection
start-of-selection.
To fetch the data records from the table T777A.
select build stext cname ort01 pstlz regio
from t777a
into table it_t777a.
Sort the internal table by build.
if not it_t777a[] is initial.
sort it_t777a by build.
endif.
Concatenate all the fields of above internal table records in one line
separated by |(pipe).
loop at it_t777a.
concatenate it_t777a-build it_t777a-stext it_t777a-cname
it_t777a-ort01 it_t777a-pstlz it_t777a-regio
into it_text-text separated by '|'.
append it_text.
clear it_text.
endloop.
To get the length of the password.
g_dlen = strlen( g_dpwd ).
Below Function module is used to Encrypt the Password.
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = g_dpwd "Actual password
SOURCELEN = g_dlen
KEY = c_key
IMPORTING
DESTINATION = g_dpwd. "Encyrpted Password
*Connects to the FTP Server as specified by user.
Call function 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'Connecting to FTP Server'.
Below function module is used to connect the FTP Server.
It Accepts only Encrypted Passwords.
This Function module will provide a handle to perform different
operations on the FTP Server via FTP Commands.
call function 'FTP_CONNECT'
EXPORTING
user = p_user
password = g_dpwd
host = p_host
rfc_destination = c_dest
IMPORTING
handle = g_dhdl
EXCEPTIONS
NOT_CONNECTED.
if sy-subrc ne 0.
format color col_negative.
write:/ 'Error in Connection'.
else.
write:/ 'FTP Connection is opened '.
endif.
**Transferring the data from internal table to FTP Server.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
HANDLE = g_dhdl
FNAME = p_file
CHARACTER_MODE = 'X'
TABLES
TEXT = it_text
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
write:/ 'File has created on FTP Server'.
ENDIF.
Call function 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'File has created on FTP Server'.
To Disconnect the FTP Server.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = g_dhdl.
To Disconnect the Destination.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
destination = c_dest
EXCEPTIONS
others = 1.
Regards,
Kumar Bandanadham. -
Requirement: I have an FTP server. I need to connect to that and need to execute a DLL file over there. Actually that DLL file when run, generates the XML file. I need to pick that file, read that and need to get that to the Application server.
Can anyone came across this req ar any sugggessions ?Hi Avinash,
Here is the code that i have written. My doubt is, according to my req, i need to execute the DLL File which gives the XML file upon executing. So what does the result in the code contain ?
PARAMETERS: user(30) TYPE c LOWER CASE,
pwd(30) TYPE c LOWER CASE,
host(64) TYPE c LOWER CASE,
cmd1(80) TYPE c LOWER CASE,
dest LIKE rfcdes-rfcdest DEFAULT 'SAPFTP',
compress TYPE c DEFAULT 'N'.
START-OF-SELECTION.
SET EXTENDED CHECK OFF.
slen = STRLEN( pwd ).
For Ftp Connection We need to create RFC Connection of type tcp/ip. During creation we come across something called Program id .
CALL FUNCTION 'HTTP_SCRAMBLE'
EXPORTING
SOURCE = pwd
sourcelen = slen
key = key
IMPORTING
destination = pwd.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
user = user
password = pwd
host = host
rfc_destination = dest
IMPORTING
handle = hdl
EXCEPTIONS
not_connected = 1
OTHERS = 2 .
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF cmd1 NE ' '.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = cmd1
compress = compress
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
LOOP AT result.
WRITE AT / result-line.
ENDLOOP.
REFRESH result.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
handle = hdl.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
destination = dest
EXCEPTIONS
OTHERS = 1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'PWD'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP. -
Transfering .csv file from SAP to NON-SAP using FTP connection
Dear All,
I am able to place the .CSV file successfully to other system using FTP connection, but when i open the file I could see the gaps between each record. I mean 1st line with the 1st record and 2nd line having a GAP and 3rd line with the 2nd record and so ..on as shown below
1 1/1/2009 0 41000027
2 1/1/2009 0 41000027
3 1/1/2009 0 41000027
I have declared an internal table as below
TYPES: BEGIN OF ty_charlist,
line(5000) type c,
END OF ty_charlist.
DATA: w_charlist TYPE ty_charlist,
t_charlist TYPE TABLE OF ty_charlist.
And concatenating each field seperated by ','
CONCATENATE res1 res2 res3 res4 res5 res6 res7 res8 res9 res10 res11 res12 res13 res14 res15 res16 res17 res18 res19 res20 res21 res22 res23 res24 res25 res26 res27 res28 res29 res30 res31 res32 res33 res34 res35 res36 res37 res38 res39
INTO w_charlist-line SEPARATED BY ','.
APPEND w_charlist TO t_charlist.
Now T_CHARLIST contains 50 records which needs to be placed on other system. I can see 50 records but gap is coming
Here res1, res2 and so on are declared as TYPE STRING..
Please do help me this issue
Thanks
PravaHello dprava ,
Try to be assisted with these examples .
1. [http://wiki.sdn.sap.com/wiki/display/ABAP/FTPfiletransferinBackground]
2. [Reg: FTP Connection; - SAP examples programs
Thank you,
Boaz -
Adding a site to a ftp connection
Hi,
Just upgraded to DW CS4 and in doing so I pressed a wrong
button...!
I have numerous sites in my site manager window and one I am
working on has reverted to being nothing more than an ftp
connection. This was my fault as I went back into the set-up window
for the site (edit site) and made it an ftp connection only, rather
than a full site with connections to local folders as well as
remote connections.
Problem is, now on the site manager list the icon has changed
from the folder with the name of the site to the ftp//sitename here
icon and I have no idea how to get it back so I have access to my
local folder.
Any help?
Thanks,
SunsV> Problem is, now on the site manager list the icon has
changed from the folder
> with the name of the site to the ftp//sitename here icon
and I have no idea
> how
> to get it back so I have access to my local folder.
There really isn't any way to go back from that choice.
so- Make a New site definition and pick "site" and not "RDS"
connection.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Need help to Configure FTPS connection for File Sender Adapter
Hi,
I want to Configure, FTPS connection (Secured Connection) for File Sender Adapter. Could anyone please guide me, what Information I require to configure. I just want to know what Information should I request the team inorder the configure FTPS so that it can be deployed properly.
I have checked with [SAP Help Link|http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm] and while configuring the communication channel found that I need Keystore and the X.509 Certificate and Private Key. which needs to be deployed on the J2EE server by using the Visual Administrator.
Is there anything else, I need to configure.
Any help would be appreciated in this regard.
Thanks & Regards,
Varun.KThe basic things are Certificate/Keys which you already know. Usually it is enough for running a sceanrio.
However, if you have additional requirements, like FTPS for "Connection Security" for encryption, then you may need additional details like commands. Rest all settings are same as FTP.
Regards,
Prateek -
How do I get SQL Agent to perform an FTP connection through a SSIS package?
I have created a number of SSIS packages that I am running through SQL Agent in various jobs. I have set up a Credential / Proxy for the job steps and for the most part everything runs no problem. The issue I have is with the step where I make
a connection to a FTP server and download files. In BIDS the step works fine but in SQL Agent the step times out. I presume that it has to do with the account that it is being run under but that is what I thought the Credential / Proxy was supposed
to handle (as it does for all the other steps). I am running on SQL Server 2008 R2. I have created a test job that has only one step which is to connect to the FTP server and download some text files. I have tried utilizing package configuration
files and have tried various ProtectionLevels to no avail.
Anyone have any thoughts or direction for me to take? Will continue to research and will post if I resolve this.
Thanks, AndrewOn the dev environment the ProtectionLevel is set to EncryptSensitiveWithUserKey and that is what I tried first on the prod server. Subsequently I also tried utilizing a package config file (with ProtectionLevel then of DontSaveSensitive) and have
also tried working with the ServerStorage.
For deployment I copied the relevant dtsx files to a solution on the prod server. I verified that the packages all had tested connections in the Connection Manager. I have run all the packages in the BIDS on the prod server and they all worked.
I have created a test package from scratch on the prod server to test the ftp connection. This test package runs from BIDS fine. I have set the SQL Agent file to access through the file system (no luck) and have saved the package to the SSIS Packages
and had the job step access from there (no luck either). -
How can I find out the server port for a secured FTP site and creating a FTP Connection Manager
I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
Thanks for your review and am hopeful for a reply.Hi ITBobbyP,
SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
SSIS SFTP Task Control Flow Component
available in the CodePlex which can invoked from SSIS.
References:
SSIS SFTP Task Control Flow Component approach
WinSCP approach
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
FTP connection on mobile device works over wifi but fails over 3G
Hi all,
Hoping someone can help, or has come across this issue.
I am developing a mobile app using flash builder 4.6 with the flex 4.6 sdk. My app needs to transfer files via ftp.
The issue I am experiencing is that the ftp connection establishes and files transfer without a problem when connected via wifi, on both android and ios platforms.
However, when only connecting via a 3G connection on a device, a problem occurs. While I can establish a connection, when I send the USER command, I never receive a response.
A simple view with code to reproduce this issue is listed below. Has anyone come across this problem? I have been searching far and wide but cannot find anything related.
Could this be an issue with Adobe Air or the socket class? I have written equivalent code using the android sdk in eclipse, and a connection to the same server and user details works on both wifi and 3g connections.
Any help would be appreciated.
Thanks.
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark" title="HomeView">
<fx:Script>
<![CDATA[
private var commands:Array;
private var s:Socket;
private var data_channel:Socket;
private function connectToFtp():void
var ftp_response:String;
var data_response:String;
var data_channel_ip:String;
var data_channel_port:int;
s = new Socket();
s.addEventListener(Event.CLOSE, closeConnection);
s.addEventListener(Event.CONNECT, connectionMade);
s.addEventListener(IOErrorEvent.IO_ERROR, showError);
s.addEventListener(SecurityErrorEvent.SECURITY_ERROR, showSecError);
s.addEventListener(ProgressEvent.SOCKET_DATA, receiveReply);
s.connect("mydomain.com", 21);
function receiveReply(e:ProgressEvent):void{
ftp_response = s.readUTFBytes(s.bytesAvailable);
trace(ftp_response);
var code:String = ftp_response.substr(0, 3);
if (code == "220")
// connected.
// send user command
s.writeUTFBytes("USER myUserName\n");
s.flush();
else if (code == "331")
// user command sent. password required
// send password
s.writeUTFBytes("PASS myPassword\n");
s.flush();
else if (code == "230")
// login successful
// change directory
s.writeUTFBytes("CWD /fibreSyncFtp/\n");
s.flush();
else if (code == "250")
// change directory successful
// send passive command
s.writeUTFBytes("PASV\n");
s.flush();
else if(code == "227")
//get the ip from the string response
var temp:String = ftp_response.substring(ftp_response.indexOf("(") + 1, ftp_response.indexOf(")"));
var data_channel_temp:Array = temp.split(",");
data_channel_ip = data_channel_temp.slice(0,4).join(".");
//calculate the port number from the last two digits - if this makes no sense, google
// FTP PROTOCOL - there are loads of guides that explain the server responses.
data_channel_port = parseInt(data_channel_temp[4]) * 256 + int(data_channel_temp[5]);
data_channel = new Socket(data_channel_ip, data_channel_port);
data_channel.addEventListener(ProgressEvent.SOCKET_DATA, receiveData);
s.writeUTFBytes("LIST\n");
s.flush();
else if (code == "125")
//use the new IP to open a second socket - this will transmit the data.
// Your first socket will transmit any commands you issue and this new socket will transmit the data
else if (code == "226")
// transfer complete
// close the connection
//s.close();
else if (code == "425")
// can't open connection
function connectionMade(e:Event):void
trace("Connection Made");
function receiveData(e:ProgressEvent):void{
data_response = data_channel.readUTFBytes(data_channel.bytesAvailable);
trace(data_response);
function showError(e:IOErrorEvent):void{
trace(e.text);
function showSecError(e:SecurityErrorEvent):void{
trace(e.text);
function closeConnection(e:Event):void{
trace(e.type);
]]>
</fx:Script>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<s:Button top="10" label="FTP" click="connectToFtp()" horizontalCenter="0"/>
</s:View>Probably you need to write your own AIR native extension, which uses the native Android sockets..I have the same problem and I'm just starting writing the extension...I guess there is no other way..At least you test with native android socket and you confirm is fine, so we know it should work
-
Background scheduling of FTP Connection through R/3
Hello Friends,
I have done FTP connection by using Z-pgm which uses function FTP_CONNECT. This is working fine in Foreground mode.
But in background scheduling of the z-pgm, i am getting the <b>error as 'RFC to program SAPFTP failed'.</b>
I checked RFC destination SAPFTP in SM59. There Activation type is 'Start on Front End Work Station'. I tested the connection also. Its alright.
How to do FTP processing in Background?
Cheers,
SeemaHello,
you could try to use RFC destination 'SAPFTPA' - it's ftp on the application server. Since SAPFTP is 'Start on Front End Work Station' and in background there is no front end work station, it can't work.
Regards Wolfgang
Maybe you are looking for
-
Error in Asset balances.
Hi, We have created a depreciation area for tax depreciation. We have executed tax depreciaton for all the assets. now when we see the asset balances with depreciation area 03 (tax dep), for some asset the balance is shown as 0 for both Acquisition v
-
How do I get my photos and books after installing new Windows?
I installed a new Windows 7 on an SSD to speed up the desktop computer. The new iTunes, of course, was empty. Now I want to sync my iPad with the new iTunes but I'm afraid that I will loose all my books (freely available ones that I downloaded and im
-
I was attempting to do the newest IOS 7 update and halfway through the reboot my phone froze. I attempted to restart the reboot by shutting the phone off but when it came back on it showed a USB cord with an arrow pointing to the itunes symbol. Whe
-
Can we use href and action attribute in netui:anchor tag both at a time...*href* is for opening a modal dialog and action is page flow action
-
hi, i m using forms6i in which in which i m calling a call_message_window_p() procedure which prompts the error on the screen, but instead of that that its giving me an error FRM-40735:ON_ERROR trigger raised unhadeld exception ORA-06508. i have atta