FTP Delivery Destination Not visible while scheduling a report.
Hi All,
We are implementing BI Publisher 11g (As part of OBIEE 11g).
In BI Pub administration we have defined FTP and Email Delivery Destinations.
But while Scheduling a report, under Destinations we see only Email option, we are not seeing FTP option.
Is this happening due to any of the missing configuration or any privileges are missing?, please clarify.
Thanks,
Aditya
Do you have "Use Secure FTP" checked?
I tried adding a source with that checked and the FTP option didn't show up either, but when I unchecked that box I was able to see the FTP option.
Similar Messages
-
i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice
Some updates and clarifications:
1. I already have my 2.4 channel fixed.
2. Wireless network name is 8 alphanumeric characters; no spaces
3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
4. I am running Airport Utility 6.0, Mac OS version 10.7.4
I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues? -
Default values for static report parameters are not visible when scheduling
Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AMHi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick -
Profit centre field not visible while using Posting Key 15
Hi,
While using Tcode F-28 and Posting Key 15 profit cente field is not visible. I have checked following configuration. In OBC4 for Reconciliation account - additional account assignment - here the profit centre field is optional. Likewise I have checked OB41 for Posting key 15 - Profit centre field is optional.
Is there any other configuration to be done inorder to make the profit centre field visible.
Many thanks in advance
Regards
NarayananDear,
SAP Standard System cannot provide PRCTR field for the screen for customer/vendor line
item although it is available if the line item is a G/L account. As a
general rule, the system assumes PRCTR to be filled by document split or
by running SAPF180 and AR/AP transfer depending on NewGL PCA or
classic PCA usage.
It was and still is not possible to enter PRCTR on vendor/
customer items.
One of the workarounds using the standard tools is to use field-to-
field substitution. You can enter the profit center in dummy field,
for example XREF1, and substitute the value entered in XREF1 into
PRCTR field.
I hope this can help You.
Mauri -
Why is outbox not visible WHILE a mail is being sent?
When I am sending mail, the outbox is not visible.
The only time it appears is when there is a problem with the outgoing email and it gets 'stuck' - THEN I have an outbox.
Is there any way I can make the outbox remain visible, in case I have made a mistake, and wish to stop a mail from being sent after I have (accidentally or otherwise) clicked on 'send'?
I have a feeling that when I was running Tiger, the outbox was always visible.
I cannot remember what happened on Leopard. I am now on Snow Leopard.
thanksClick on Window in the menubar while in Mail, and choose Activity. This will bring up a monitor with a Stop button. Several seconds is not long sometimes. Watch the monitor while trying to send -- take note of the time spent connecting to the server versus the time spent transmitting.
Ernie -
Appointments with option Working Elsewhere not visible in Scheduling Assistant
I have a problem with appointments that have the Show As option as "Working Elsewhere". When someone tries to use the scheduling assistant and selects someone who has an appointment set to "Working Elsewhere" the appointment is
not visible at all in Scheduling Assistant. If the person changes the appointment to Busy or Out of Office is becomes visible again to the person using Scheduling Assistant. Outlook 2013 and Exchange Server 2010 with the latest updates installed are being
used in our Environment. Is this type of behaviour by design or is it something else like using Exchange 2010 that doesn't support it fully?Hi,
Based on my research and test, the WorkingElsewhere field is applicable for clients that target Exchange Online and versions of Exchange starting with Exchange Server 2013.
Between outlook 2013 clients and mailbox being on Exchange 2010, the meeting invite would show as "Working Elsewhere" for each of the attendees in their respective calendars but does not show any information regarding other attendee who accepted
the meeting request.
Thus, the Working Elsewhere field is visible in attendees’ Schedule Assistant with outlook 2013 and mailbox on Exchange 2013. Here is an article talked about it:
http://technet.microsoft.com/en-us/subscriptions/microsoft.exchange.webservices.data.legacyfreebusystatus
http://msdn.microsoft.com/en-us/library/microsoft.exchange.webservices.data.legacyfreebusystatus(v=exchg.80).aspx
Regards,
Winnie Liang
TechNet Community Support -
Start of cycle date is not taking while scheduling
Hi
I have created a maintainance plan with scheduling indicator TIME and scheduling period 365 days . I am giving start of cycle date as 04-02-2011 but while scheduling the plan it is taking 19-02-2011 as first plan date . my maintainance plan cycle is 15 days.
I want that date as 04-02-2011 . how can I get that.
Regards
KumarThe system is working fine. Once you decide the start cycle date then first plan /Order will come only after the cycle duration from the start cycle date. You can put 15 day before date from 4-2-2011. then you will get first call on desired date.
Raj -
Content not visible while using DVBClassLoader
Hi, we have a problem with DVBClassLoader. We need to download several *.class files from WWW server in our application. The file is downloaded, but the problem is that the content is not visible for main Xlet class. Can someone help us please???
try {
classPath[0] = new java.net.URL("file:" + sBuffer.toString());
System.out.println("URL is " + classPath[0]);
classPath[1] = new java.net.URL("http://XXX.YYY.146.233/");
} catch (MalformedURLException e) {
cl = DVBClassLoader.newInstance(classPath);
try {
cl.findClass("SecondClass");
System.out.println("SecondClass read");
} catch (ClassNotFoundException e) {
secondClass = new SecondClass(context, scene, mainContainer, telo);
secondClass.display(path1);I haven't tried it, but it looks to me like you need to provide the parent ClassLoader in order to handle delegation to the DVBClassLoader.
intstead of this: DVBClassLoader.newInstance(classPath);
use: DVBClassLoader.newInstance(classPath, getClass().getClassLoader()); -
Error while scheduling DESKI report in infoview
I m scheduling a DESKI report to users enterprise inbox from infoview using a server group. This server group has DesktopIntelligence Job server, Destination Job server, Adaptive Job server and Program Job servers and all these servers are running.
When I schedule the report to boldusers enterprise inboxbold it get failed and shows this error message
bolddestination DLL disabled. []: [CrystalEnterprise.Smtp] bold
I m wondering what has to be enabled for scheduling a report to infoview's own inbox.Abhilash
You are correct that it shows all the prompts but only when we run the report either directly from the CR Designer or via View on Demand in Infoview/CMC.
But if I try to schedule an instance of this report, I am getting a check box in the parameter section which says "Show unused parameters" to see this dyanamic prompt. And When I check that box in Infoview still I am not able to select any value for this prompt as it's greyed out.
Hope I am able to explain my query to you.
Also attached a screen shot of the scenario for your reference. -
Error Code:942 While Scheduling a report in BI Publisher
Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singhi know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this. -
BI Publisher: Issue while scheduling the report/query to be executed daily
Hi,
We are using Oracle Business Intelligence 11.1.1.6.3 and while we schedule a report(RTF Template) we are facing issue.We use bursting query and when we select option to execute immediately it runs fine and sends notifications,it also executes when we schedule it to run Once but fails when i schedule the report to be executed DAILY .hii
The query does not includes any RKF, CKF any complex calculations. as I said before also query is based on MP which is designed on a single Cube. There are no such navigational Attributes used for selection, Number of records are not more than 300 on that particular selection parameter
there is only one info object which is creating issue & it is a master info object. If i am restricting this info object in the query & then executes the query , it gives the error msg also i put a variable for input parameter, & there I restrict the value, then also query executes with an error msg
But if query is not restricted with any value for that info object then query executes with in a second.
Thanks
neha -
Unable to see the csv option while scheduling the report
I'm using BO XI 3.1. While i'm trying to make a schedule of a report, i am unable to see the csv export option. Is there a way to enable in the csv option?
Build version : 12.1.0.882
Edited by: mhsrinivasan on Mar 10, 2011 2:36 AM Added the version detailsScheduling the reports in CSV formate is possible in BO XIr3.1.
I would suggest you to contact to your BO Admin to check weather you have proper rights or not, in CMC scheduling part. -
OBIEE error while scheduling the report.
Hi,
I scheduled one report in OBIEE tool for 8.30 pm but that report get failed.
I executed the same report many times with the same database configuration, same FTP configuration,
I never get such exception before.
In the morning i again execute that report with same configuration and it works.
I am unable to find the cause of the error.
bellow is the error description.
oracle.apps.xdo.servlet.scheduler.ProcessingException: java.sql.SQLException: ORA-01033: ORACLE initialization or shutdown in progress
could any body please explain what is the exact cause of the issue.The oracle Db you are connected is being shut-down.
-
Error while scheduling the report in bi publisher
oracle.apps.xdo.servlet.scheduler.ProcessingException: Error occurred while scheduling the job.
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.getDateObject(SchedulerServlet.java:2202)
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1394)
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:289)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:80)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined . -
List of values apprear for email alert while scheduling the report
List of values apprear for email alert while scheduling the report
Hi,
Can you please expand on your issue?
Cheryl
Maybe you are looking for
-
I have a G12 with a scratched lens. need fix for what I hear is common problem.
NLM
-
Output Device Missing in Final Cut Pro while burning
Our Output device in dropdown box is now missing all of a sudden. I wanted to know how to manually resolve this issue, if anyone could assist? We were burning a DVD from Final Cut Pro 10.0.09. and we got an error message: Not sure what happened durin
-
GT683: swapping RAID0 HD config for non-RAID/AHCI SSD boot drive
A question re: MSI skus which come with 2x HDs in RAID0 config. My system (GT683DXR-603US sku) came with 2x 500GB HDs (WD5000BEKT) in RAID0 config. First thing I did was to replace this with a Crucial M4 256GB ssd, though prior to this I took an imag
-
Everytime I close a tab a new blank tab opens on its own.
Hi, I'm using Firefox 6.0.2 and it's a while that I'm facing this problem. Anytime I click the little X to close the tab (sometimes I have to click it 2-3 times) it closes the tab but a new blank tab opens itself. For example when I start with 1 tab,
-
ex: JComboBox Scombo31 = new JComboBox(); Scombo31.addItem("S"); Scombo31.addItem("P"); Scombo31.setToolTipText("S=steel P=paper"); the addItem is OK but the ToolTipText don't appear.