FTP disconnects all the time

Hi
Why does BC server connection disconnects so often? in DW and now using Espresso, BC connection will disconnect every few minutes. Really annoying.
Anything I can change in the FTP setup?
Thanks
Micha

Yes,
open the Windows Command Prompt and type ping -t yoursite.com (this should be your site url, without the www or http://)
You can open the command prompt by pressing the Windows key, then typing cmd.exe (if you're using Vista or Windows 7).
After entering ping -t fuxcan.businesscatalyst.com and pressing CTRL+C I got this:
Average ping 147ms and 0% packet loss.
Best regards,
Iulian Radu.

Similar Messages

40gb Ipod says "do not disconnect" all the time... please help!

My 40gb ipod just says do not disconnect all the time when it is connected to my pc. itunes says the update is complete and my computer is recognising the ipod.
please help!!!

I'm having the EXACT same problem... it all started after I did the iPod software updater...
HELP!!
BTW - my iPod is the 20GB
iPod is running fine (otherwise), but will not update, even though iTunes says update is complete. iPod screen continuously flashes Big Red Do Not Disconnect screen.
Oy.

5s ios8.1 wifi disconnect all the time

My 5s using ios8.1 cannont connect wifi very well.
It disconnect all the time when I am playing games, even I sit by my AP.
Ios8 wifi problem seems a big issue, but Apple just ignore user experience.

Hello epatjn,
We've an article that can help stabilize your WiFi connection.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Cheers,
Allen

A few months ago I bought an imac 27 inch late 2013 ... ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ...

a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and 1TB IOMEGA
any one have a solution? anyone dealt with this problem in the apple care program?

You are still under warranty and/or have AppleCare. Call them. Let them deal w/it.

Usb3 drive disconnecting all the time at a usb 3 port on my macbook pro

i just bought the new macbook pro 13 inch and i was into some point tricked because the salesman from apple assured me that the laptop would be shipped with mountain lion and i could do the upgrade for free for maverick. so when i recieved the computer i found out that it actually came with maverick intalled and after talking to an apple customer support he said i could not go back to mountain lion. so most of my software are damaged according to the new system and it simply doesnt let me open many apps i just installed.
so now i have another bigger problem. everythime i connect a usb 3 HD into my new macbook, the HD gets disconnected. i used already 3 diferent drives and tried at least 3 diferent cables but the problem persists. Note that it never happenned with a usb2 port. is anyone having the same problem?
at this point i am pretty upset with the company alltogether. i had purchased at least 30 macs and i never had any sort of problems till now.

I just got a new IMAC and experienced the same issue with a RAID 10 array with 4 drives spontaneously disconnecting in the middle of a data transfer with the message "you should eject disk properly, etc. etc." message.
As many others I tried all the obvious solutions. Different cables, different drives, etc. Then I read something about radio wave interference from wireless keyboards. Well, I don't have wireless keyboards or mice (don't like them) but still, it stuck in the back of my mind.
I did find that a USB 2.0 cable with noise suppression dongles at each end worked just fine, if a bit slowly. Anyway, I found an old set of ferrite couplings that were made for video cables back in the day and placed one set at each end of the USB 3 cable. I then moved my RAID array as far from the computer as possible and plugged it all back in. The problem has not reoccurred even with the transfer of very large folders of files from a networked PC RAID.
Just a thought but it seems to have worked for me although the fact that this sort of thing is necessary does not speak well for Apple.

D110 keeps disconnected all the time

Every single time I turn on the printer, the Hp center says the same, printer disconnected, i've tried everything I could like, restarting the pc, turning off and on the router, uninstalling and installing the drivers but it seems that nothing have worked so far.
I'm giving my system's specs so anyone with a posible solution can help me with this issue that is becoming annoying.
Windows 7 64 bit home
Eset Smart security antivirus
actiontec mi424wr rev. e Router (Fios service)

Download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-89191-1
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My ipod says disconnect all; the time now i have updated and restored it

I just opened itunes & connected my ipod. I restored my ipod because i deleted the songs from my ipod and updated it but they didnt come of so i used iupod updater and now it just say "do not disconnect" but it is not showing "do not disconnect" in itunes, but it is on my ipod.This is my second ipod and the same happened last time. can someone please help?. Thanks

If you automatically update your ipod, here's what to do, connect your ipod and WAIT untill itunes knows it's there, then go to edit, preferences, then go to ipod, then if you auto update it, make sure that the box that says "enable disk use" is unchecked. Then click ok. If you manually update, slect auto-update without the "enable disk use" selected.

Ichat disconnects all the time

Hey all,
I'm experiencing a problem with ichat. Whenever i sit idel for 5-10 mintues ichat discconects on me. is there anyway i can have a steady connection on ichat?!

HI Projkt:
Could you tell us a little about your set-up? Are you wireless? Is your Mac going to sleep when it disconnects? Are you behind a router, if so, what's the model/make?
If you are wireless and your Mac goes to sleep, you will loose your AIM connection, the only way to resolve that issue is don't let your mac go to sleep.

Disconnecting all the time

been having problems with my BB option 3 since i moved home 3 weeks ago
had line test done by BT used the BT speedtest website and just recieved a new HH v2 today
i get very regular disconnects sumtimes every 2-3 minutes longest ive had a stable connection for was just over 1 day
this is my line stats with the new hub attached currently connected via ethernet to HH v2 to test socket with filter and phone plugged in. new HHv2 seems to be actually disconnecting wore than the old one
speed has just dipped down from 6.2mb to 2.3mb as well
need help as im tearing my hair out with telephone support
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 0:17:05
Downstream
2,304 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
32.6 dB / 11.0 dB
Line attenuation (Down/Up)
11.0 dB / 9.0 dB
Output power (Down/Up)
15.8 dBm / 12.5 dBm
Loss of Framing (Local)
47
Loss of Signal (Local)
52
Loss of Power (Local)
0
FEC Errors (Down/Up)
37 / 0
CRC Errors (Down/Up)
4 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
338

eniginner been
new socket fitted and changed the lines in the green box in the street over to new set of wires as there was sum "iffy looking" connections
also recived a new HH v3 in post
still getting disconnects but not as many
new line stats
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 04:37:37
Downstream:
7.469 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
14.6 dB / 26.0 dB
Line attenuation (Down/Up):
9.0 dB / 6.5 dB
Output power (Down/Up):
18.0 dBm / 12.2 dBm
FEC Events (Down/Up):
4918145 / 323
CRC Events (Down/Up):
6995 / 318
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
274740 / 344
Error Seconds (Local/Remote):
1161 / 414
Download speedachieved during the test was - 0.72 Mbps For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps. Additional Information: Your DSL Connection Rate :7.65 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM) IP Profile for your line is - 2 Mbps

HT4628 Wi-Fi disconnects all the time

It is very annoying. I have Mac Air. My infrastructure is WPA2 Enterprise using Cisco equipment. This works fine for my Windows PC and Android devices. But Apple products lose connection every 5 minutes, it seems. How do I fix this?

Hello Mikolk,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
The following Wi-Fi base station (or Wi-Fi router) settings are recommended for all Macs and iOS devices.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Have a nice day,
Mario

N73 - Memory card disconnecting all the time

Didnt have this problem before. It started happening when I updated to new firmware week ago. When I use data on memory card (mp3 / excel / word / copy data / take pictures / just surf memory card) it disconects!
With message: "Removing memory card is not safe if you don't select "remove memory card"."
Sometimes it passes only few seconds from acessing memory card to disconnecting, sometimes I manage to use memory card even for 10 or more minutes, max is about 1hour or so.
Memory card is takeMS 1GB miniSD and it worked fine before firmware update. How can it be fixed?
Thank you!

10-Dec-2006 02:13 AM
mikeyy wrote:
Didnt have this problem before. It started happening when I updated to new firmware week ago. When I use data on memory card (mp3 / excel / word / copy data / take pictures / just surf memory card) it disconects!
With message: "Removing memory card is not safe if you don't select "remove memory card"."
Sometimes it passes only few seconds from acessing memory card to disconnecting, sometimes I manage to use memory card even for 10 or more minutes, max is about 1hour or so.
Memory card is takeMS 1GB miniSD and it worked fine before firmware update. How can it be fixed?
Thank you!
Did you find a solution? I have the same problem and indeed just after the firmware update.
Hjalmar Milo
Forensic EDP Auditor

I phone disconnecting all the time

My i phone seems to disconnect right after I answer the phone.This happens with new numbers mostly or numbers that are not in my phone book. This is a pain as I am using this phone for business and then my customers get irritated by delayed response.

Get a bumper for your iPhone to ensure you are holding it correctly. I'll leave a link for them at the bottom of this post.
AT&T is also notorious for having terrible cellphone quality and frequent call drops, if you are on AT&T.
http://store.apple.com/us/product/APPLE_IPHONE_BUMPERS-104238
HuskieN

When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?

When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?
it worked the first few times i did it but the next day after i closed out of itunes once, the device only appears when i plug in my phone.

Whenever a menu choice is grayed out, that is because you have Restrictions turned on in Settings. Be sure to turn it off.
You are confusing an itunes store account with an icloud account. You two can continue using the same ID for itunes (thus sharing purchased music, apps, etc.), but you really should have separate accounts (different IDs) for icloud, since an account is intended for one user to keep his/her devices in sync.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/
Then go to Settings>icloud and scroll to the bottom of the screen and tap Delete Account. (have restrictions turned off) That will disconnect the device from the account but will not delete data in icloud or other devices. Then sign in using the new ID.

Macbook battery life, is there a problem If I keep it plugged almost all the time?

Hello.
New Mac user here, so I was wondering if there's a problem if I keep my MBP plugged all the time.
Most of the time I'm on my room using my MBP fully charged and I don't disconnect it.
Is there a problem with my batter life if I do that?
Or it's recommended to unplug and use it till the battery run off and then charge it again?
Because I work a lot on my MBP and that way in a simple day I could charge it and run uff the energy of the battery 2 to 3 times at day.
What's better for the life of my battery?
And if you could give me some advices to maintenance my battery and Macbook pro (also programs) I would appreciate it.
I own a Macbook Pro 13-inch, Mid 2012
2.9 GHz Intel Core i7
8 GB 1600 MHz DDR3
Intel HD Graphics 4000 1024 MB
With OS X 10.9
Thanks

Tamarizz wrote:
New Mac user here, so I was wondering if there's a problem if I keep my MBP plugged all the time.
No. I do that most of the time. Perhaps monthly I discharge it to the 40% level to keep the battery happy. Do not discharge the battery completely. If you are forced to use only battery power and you see the battery is low warning terminate your session or plug into AC if you can.
Here are Apple articles with official battery usage guidelines:
http://www.apple.com/support/macbookpro/batteries_power/
Ciao.

When bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone?

when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
Any ideas - solutions - comments please?

I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

FTP disconnects all the time

Similar Messages

Maybe you are looking for