FTP error: Receiver Communication Channel
Hello Experts,
I am getting the following FTP error in my Receiver Communication Channel.
Error occurred while connecting to FTP server: Peer certificate rejected by ChainVerifier
Please suggest.
Thanks,
Anup
Hi Anup,
Problem is with FTPS and not FTP.The SSL handshake needs to confirm that the FTPS client is using the FTPS server's DNS name to access the FTP service since only the DNS name of the FTPS server is stored in the certificate signed by the trusted CA (e.g. VeriSign). it's the way the Certification Authorities works.
If you are using any IP address then try with your host name.
Regards,
Madan
Similar Messages
-
Error in the SOAP Receiver communication channel
Hi ,
My scenario is RFC - to -SOAP (synchronous ) i have specified the TARGET URL inthe SOAP receiver comminication chanel.. but while testing the interface by providing the test data from R/3 .. I'm not getting any Respose.. ..
If I check in the SXMB_MONI in i'm getting the following message .. but the URL whicjh i provided that is fine.. but my doubt is through XI may be it's not able to connect the Target System... .. so, please suggest me...
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: www.webservicex.net</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
regards
JainBy default, the SOAP adapter sends the SOAP message with the content type text/xml.
When you check "Do not use SOAP envelope", the default contnet type is application/xml.
You can change the content type like this: Go to the SOAP receiver communication channel module tab. Add the module "localejbs/AF_Modules/MessageTransformBean" before the standard module. Add the parameter name Transform.ContentType and value text/xml.
Check out this
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
One way of testing ur scenario
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
Also have a look here
SAP Note 856597
reward points if solution found helpfull
regards
chandrakanth -
Error in Receiver Communication Channel in FCC
I have a simple scenario of Proxy to File. I have to just one field in complete row. So my structure is as below : MT_RecordIB -> Records. So my XSD looks like this :
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://XXXl.com/INF31018/SAPSerOrd_DaysIn" targetNamespace="http://hnwl.com/INF31018/SAPSerOrd_DaysIn">
<xsd:element name="MT_RecordIB" type="DT_RecordIB" />
<xsd:complexType name="DT_RecordIB">
<xsd:sequence>
<xsd:element name="Records" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
I have used FCC and the parameters are :
Recordset Structure Records
Records.fieldSeparator 'nl'
But I am getting following error in Receiver Communication Channel :
Failed to process message content. Reason: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_RecordIB' found in document', probably configuration error in file adapter (XML parser error)' (Software version: 3.0.21)
Thanks,
Pankaj SinghHey Pankaj,
Your content conversion parameter might be configured improperly.
Refer this blogs
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Refer the following threads for your problem
[ Unknown structure 'ns0:MT_dbglgtr_FileName' found in document'|Unknown structure 'ns0:MT_dbglgtr_FileName' found in document']
Rgds
Ramesh -
Error in JDBC receiver Communication Channel
Hi,
I am facing a problem at receiver communication channel of JDBC adapter. I am gettting the error as,
"com.sap.aii.af.ra.ms.api.RecoverableException: Channel has reached maximum concurrency(5,000 concurrent Messages) and no free resourse found within 5,000 milliseconds; Increase the maximum Concurrency Level."
I am having the configuration on 4 different nodes. but suddenly only 1 out of 4 is working fine but remaining 3 are throwing this exception. It says to increase Maximum Concurrency level but i want to send only one message through one channel.
Is there a way to rectify this error. I am in deep trouble.
can anyone help me out in solving this issue, Its very greatfull if you do the needy.
Thanks,
Soorya,Hello Aarthi,
I have gone through the link which you have provided for me in this regard. But i am not clear why those values,
AFW.Call.maxConsumers 10
AFW.Recv.maxConsumers 5
AFW.Rqst.maxConsumers 10
AFW.Send.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Call.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Recv.maxConsumers 10
JDBC_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Send.maxConsumers 10
These are concerned to MS only but not at JDBC adpater.
We have to look at JDBC prospective but not at the MS prospective.
So can you please look into the issue as JDBC adapter perspective.
Its like this that, there are 5000 messages are waiting for the free resource with in the next 5secs and as it is reached maximum concurrency of 1.
So my question here is,
Is there only one option to increase this value to 2 or more?
Or else do we have any other option to overcome this problem.
Please reply to this ASAP.
Thanks,
Soorya. -
Regarding the JDBC Receiver Communication Channel error
Hi All,
While executing Jdbc to Jdbc interface, i am getting error in jdbc receiver communication channel. please see below message for error description..
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel 'JDBC_AccntStatements_Receiver', Service 'BS_BusinessSystem', Party '': JDBC Adapter configuration not activated
Note: the channel status is active and activated(not in change mode).
Any idea on this error.
thanks,
Madhusudhan.Hi
According to your Error Message,
Saying that JDBC Configuration is not Active.
Once again cross check all the config is Activated & also Test your Config Using Config Test Tool in ID
And also check in RWB-Adapter Engine-Adapter monitoring ---select the option instaled & Started. whether the JDBC Adapter is working fine or not -
Error in HTTP_AAE receiver communication channel, PI 7.4 dual stack
Dear Experts,
I am facing the below certificate error in HTTP_AAE receiver communication channel while using the third party (bank) private key. Third party bank server is HTTPS enabled, moreover they have generated the public and private keys on their server, and they shared the corresponding private keys in .p12 format to us. Our scenario in SAP PI is synchronous ABAP Proxy to HTTP_AAE, when I see the message in SXMB_MONI after testing, we get he below certificate error, though we have provided the correct path from keystorage view and keystorage entry in HTTP_AAE receiver communication channel
“com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SENDING_HTTP_REQUEST, sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target”
We have imported the private key provided by bank in Netweaver admin key storage, by following the below steps.
NWA -> Certificates -> Key Storage -> TrustedCA->Import Entry->Entry Type->PKCS#12 Key Pair->select the .p12 file->import.
Please see the attached doc for related screenshots.
Please experts help me experts as this is on high priority from client, also suggest me if I am doing anything wrong here.
Thanks,
FarhanHi Farhaan,
do you have only one certificate or multiple certificate? HTTPS can have 2 or 3 certificates (Root, Intermediate [optional, if any 3rd party person is there in the middle then we can get this certificate] and system certificates).
The issue is with the certificate and it can be because All the certificate is not present or path is not correct.
Please refer the below wiki in which solution is given for this peroblem.
Troubleshooting 7.1 - End-User Experience Monitoring - SCN Wiki
The similar issue is resolved by applying SP level patch, please refer the below discussion
SAP PI 7. 3 HTTP_AAE Receiver with SSL
Please check the below blog -
Configure the HTTP_AAE receiver communication channel with SSL
please also check the below discussion
Where to Import Clients SSL certificate for HTTP_AAE
regards,
Harish -
SMTP Receiver Communication Channel error: connection refused
Dear all.
When migrating processes from XI 3.0 to PI 7.1 we run into the problem that we can't get the SMTP Receiver Communication Channel working on PI. We get the following error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect
(The NetWeaver Administrator log shows the following:
unable to call the mailer: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect)
- We copied all configuration settings 1-on-1 from XI to PI, and double-checked we made no mistakes.
- We confirmed the PI system can in fact reach the mailserver by successfully sending Email from the ABAP stack of the PI system (transactions SOST and SCOT)
- When deliberately mistyping the mailserver URL, we get the error: java.net.UnknownHostException. This makes me believe that the 'connection refused' error we get (after re-entering the correct mailserver URL) is indeed coming from the mailserver. But why would it refuse the connection if it allows the connection from the ABAP stack of the same server? And why didn't we run into any such problems on XI?
Any help is much appreciated!
Kind regards,
Eddy Driessen.Hi All,
We have upgraded our XI3.0 system to PI7.1 and currently performing testing for different adapters. We are also facing similar problem for a scenario File to Mail
19.11.2010 11:31:56 Error Mail: error occured: java.net.UnknownHostException: [url]
19.11.2010 11:31:56 Error Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException
19.11.2010 11:31:56 Error Adapter Framework caught exception: Failed to call the endpoint
19.11.2010 11:31:56 Error Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null " null"]; nested exception caused by: java.net.UnknownHostException: [url].
19.11.2010 11:31:56 Information The message status was set to WAIT.
*[url] = Mail server
Can anyone suggest the steps to solve this error
Thanks
Varun -
JDBC : error in receiver communication channel?
Hi Experts ,
I am doing a JDBC to JDBC scenario. The following error comes in my receiver communication channel monitoring.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'VIN_STG_STORER_RMS' (structure 'Statement'): java.sql.SQLException: FATAL ERROR document format in structure 'Statement': expected 'access' tag(s) not found
My receiver data type has got the 'access' tag. What other reason can cause this error?
Receiver table name : VIN_STG_STORER_RMS
Regards,
ShamlyHi Ranjit,
My moni shows processed successfully. but the error is in communication channel.
I have pasted below the target xml structure. Any suggestions?
Thank you.
Shamly.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://mg.adityabirla.com/mg/wms/store_supps" targetNamespace="http://mg.adityabirla.com/mg/wms/store_supps">
<xsd:element name="MT_WMS_Store_Supps" type="DT_WMS_Store_Supps" />
<xsd:complexType name="DT_WMS_Store_Supps">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
1f3cf480f98411dcb83a0003ba0adbbd
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="Statement">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
33dd8ee0ef5c11dcb812001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="VIN_STG_STORER_RMS">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
33dd8ee1ef5c11dca724001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="access" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f0ef5c11dca305001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="STORERKEY" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f1ef5c11dcb3c3001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="15" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="TYPE" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f2ef5c11dcc33e001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="WHSEID" minOccurs="0">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a31a45f3ef5c11dcabb7001d7df81104
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
...and so on for many other fields.
Edited by: Shamly MM on Mar 24, 2008 10:27 AM -
Recordset structure in receiver communication channel
Hi gurus!
I have a problem with my receiver communication channel it says "Unknown structure 'Headers' found in document', probably configuration error in file adapter (XML parser error)'"
It's for sure that the problem is in the configuration of the adapter.
My scenario is from iDoc to File and i need to write only one header and many Lines, i made the data type like:
Headers
---Header
Lines
---Line
And the problem is in the configurarion of the recordset structure and the lines below.
If you know another way better to make the data type to acommplish what i've to do, just tell me I just made it that way because i thought it could work.
If something is not clear just let me know, what i more need is the config. of the receiver adapter.
Thanx in advance.
JuanHi Juan
If i understand correctly .. you are doing FCC on your receiver communication channel...and the following is your Target Data type
Headers
---Header
Lines
---Line
and FCC parameters you created are as below
Recordset structure: Headers,Header,Lines,Line
Header.fieldSeparator \r\n
Header.endSeparator \r\n
Line.fieldSeparator \r\n
Line.endSeparator \r\n
If the above data is correct, then I would like you try out the FCC parameters in my previous post. Because in the FCC parameters, you used only substructures(Header and Line) and you did not mention the lists ( Headers and Lines). That's why i think it is errored out.
If my interpretation is wrong, please let me know where i went wrong, i will try to look at again. -
Error in communication channel " not initialized"
Hi All,
I'm working in FIle to mail scenario. In this scenario whenever i upload a text file to the R/3 application server. that file should be sent (as a attachment with a mail) to any email id. I did all the required configuration in IR. but i'm verymuch confused in ID configuration. I have created both sender and receiver communication channel in the same business system which refers a sender (R/3) System.sender communication channel is working fine. but when i activate the receiver communication channel it shows an error "not initialized".
So kindly let me know,
1. Should i use business system for my receiver end?,If so how do i create it?
2. is receiver agreement, receiver determination, interface mapping necessary? If so, how do i configure it? because i'm not using any recever service since i'm sending mail to my mail box.
note:
It would be very helpful if u refer any link to find out the recever determination and interface determination configuration for this type of scenario.
Thanks & Regards,
hari.Provide us the XML formed after mapping.
make sure that the msg type name is Mail and the name space name is http://sap.com/xi/XI/Mail/30.
regards
krishna -
Proxy receiver communication channel
Hi Experts,
When I am executing an interface in XI, I am getting the message in SXMB_MONI.
<SAP:Stack>Unable to create HTTP client (exception 1)</SAP:Stack>
The receiver is Proxy here. Where can I get the service number of R/3 system to enter in the XI receiver communication channel and what's the significance of this? I am using Proxy receiver adapter with URL address connection. I have given 8000 as the service number. Not sure whether this is right. What is the path prefix?
In the SXMB_ADM, do I need to maintain some parameters for proxy?
Thanks
RickyI did give the Service number of R/3. My R/3 uname and password for login
But I am getting the message in MONI "HTTP response contains status code 401 with the description User not authorized for message processing Authorization error when sending using HTTP (error code: 401, error text: User not authorized for message processing". Pls help to sort this out
Thanks
Ricky -
Regarding Receiver Communication Channel (Concurrency problem)
Hi Masters ,
In Receiver Communication Channel which is connected to oracle data base ..while updating records Status from N to C . i am getting following errors :
**Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has reached maximum concurrency (5,000 concurrent messages) and no free resource found within 5,000 milliseconds; increase the maximum concurrency level**
Actually we are updating 10000 records status from N to C....... earlier it was updating in 30min now its hanging and giving above error ...... after 3 hrs its automatically displays updated succesfully message .
Can you help me to understand wht exactly happening and at wht level i have to do settings in communication channel so tht it should work properly..
Thanks in Advance.............
Jagannath.Hi Jagannath
you can specify the maximum concurrency for receiver adapters. This defines the number of messages an adapter can process in parallel on a cluster node.
Enter the number of messages to be processed in parallel by the receiver channel. For example, if you enter the value 2, then two messages are processed in parallel. Default value is 1 and this means only one message can be processed at a time by the receiver channel.
http://help.sap.com/saphelp_nw70/helpdata/EN/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
increase this parameter from 1000 to a higher value you required and you would not be facing such problem
Regards
sandeep
If helpful kindly reward points -
Problems in IDOC receiver communication channel
Hi,
I am trying to build an interface to get data from 3rd party legacy system using JDBC and post the data into ECC using IDOCS. I have IDOC built in ECC, I am able to import the metadata in IDX2 after creating port in IDX1. But after building the whole interface, I dont see the IDOC receiver communication channel which has to post IDOCS in the ECC 6.0 system.
Please assist.
Rgds
KishoreOK in that case, we are getting the following error in the Message monitoring:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code>
<SAP:P1>-BS_AVN_TO_FILE_JDBCSERVER</SAP:P1>
<SAP:P2>-BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:AdditionalText>
<SAP:Stack>Problem occurred in receiver agreement for sender -BS_AVN_TO_FILE_JDBCSERVER to receiver -BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY: No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:Stack
Please check and assist.
Rgds
Kishore -
File to Proxy Scenario : Error in communication channel monitoring
Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
ChandravadanHi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani -
Error in back routing Error in communication channel
Hi Friends,
I am sending the Idoc from ECC250 to ECC150 using XI, whenever I am sending the Idoc, I got this error Error in back routing Error in communication channel in SXMB_MONI.
In IDX2 also I got this error I:000.
Please suggest me how to resolve this issue.
Regards,
Shalini ShahDid you cross checked all the configurations are in Place.?
I understand that the idoc has been received from ECC250 ,Are able to see the payload (i.e idoc )
in SXMB_MONI ?
IS configuration steps like
Receiver determination,
Interface determination
are correct?
Rajesh
Maybe you are looking for
-
Error When Trying to scan acrobat 9 pro
I have Acrobat 9 trial version, and a workcentre M20i and the Windows 7 I have a problem and is that when I trying to scann a paper Adobe send me an error message and then close. I installed the win 7 new driver for the scanner. Another tip is that I
-
i have just noticed that my headphone are not working
-
My officejet 4315xi all in one says ink cartridges 27/56 & 58 for black
When I put in the 56 cartridge it says " cartridge error" WHY doesn't it work when says that number on machine??????
-
Why can't I sample or record with effects in real-time?! LE9
Here's the scenerio: I'm recording electric guitar, but I'd like to record in real-time using the effects in Logic Express. I can't hear the effects until after I've recorded the track. Am I missing something totally obvious? I'm using LE9 and a Focu
-
How to activate Workflow Agent listener Service - Oracle E-BIZ R12
Environment DB : 11.1.0.7 Appl Rel. : R12.1.1 OS : RHEL 5.1 (x86_64) Following is the work around done to bring up WF Agent listener After Completion of Clone navigating to WORKFLOW system , Status of Notication Mailers : Down Agent Lis