FTP Error : Windows cannot acces folder ..... Details : Element not found

Hi All,
I'm just transferring to my new office that uses FTP as a means of storage for sensitive data. At first i can connect to ftp servers easily using windows explorer. But over time, when i'm about to connect to ftp server, the windows explorer replied
Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access this folder. Details: Element not found
I can access the ftp server using IE or another web browser, even using WINSCP and other ftp file transfer software. I need to be able to connect to ftp server using windows explorer again. Can any of you help?
The ftp.exe is not blocked in firewall rules (i've checked).
Any comments/helps are appreciated.

Hi,
Firstly, make sure you have enable "Enable FTP folder view (outside of Internet Explorer)" setting:
Internet options -> Advanced -> Enable FTP folder view (outside of Internet Explorer)
And then try use mapping network drive:
1.Click on Computer.
2.Click on Map network drive from the menu.
3.Map Network Drive window will open. Now click on the link
Connect to a Web site that you can use to store your documents and pictures.
4.Now simply follow the step by step wizard to add a new network location. Select
Choose a custom network location when given the choice of where to create this network connection.
5.Type your ftp address. Specify a user name and password if required.
6.Give your newly created network location.
Alternative, use the registry method that was marked as answer in the following thread to fix it:
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/this-ftp-site-cannot-be-viewed-in-windows-explorer/e699d41e-98ae-48c1-9231-d570d46c0f38
Karen Hu
TechNet Community Support

Similar Messages

Error in installing windows 2008 r2 sp 1 element not found

error in installing windows 2008 r2 sp 1 element not found

Hi,
As Akash G says, would you please let us know the complete error message or provide a screenshot? It will help
us to go further.
In addition, would you please let me confirm whether install the Windows Server 2008 R2 Service Pack 1 via
Windows Update, or download the installation package and then install manually?
Please refer to the following article and check if can help you to solve this issue.
The error 0X80070490(Element not found) when you are installing a service pack or update
http://blogs.technet.com/b/asiasupp/archive/2011/06/20/the-error-0x80070490-element-not-found-when-you-are-installing-a-service-pack-or-update.aspx
By the way, you can also install the Service Pack 1 in
Clean Boot mode manually. Then please check if install successfully.
Hope this helps.
Best regards,
Justin Gu

Error during template allocation (CPTK) WBS element not found

Hello Gurus,
I tried to do template allocation
system is showing error WBS element xxxxxxxx does not exist
object type is - PR
object is - WBS
system is searching for field PSPNR of table PRPS as per the object type PR which is maintained in table TBO00 but during template allocation program it seems system is referring for POSID of table PRPS. hence the error.
Is there any note to apply? or any config I have missed ?
please guide
Thanks and regards
V.S.Natarajan

Hello Saurabh,
Thanks for your quick response
I checked both the notes created program as per note 149695 and there is no hierarchy error and applied the note 1853307 but still the same error exist
any other suggestion please
Thanks and regarsd
V.S.Natarajan

Getting Error Windows cannot find Adobe Air installer

Trying to install Adobe Air. Installation file wont run. Get error when i run the file.
"Windows cannot find 'C:\Users\Matt\AppData\Local\Temp\AIR4654.tmp\Adobe AIR Installer.exe'. Make sure you typed the name correctly, and then try again"
I am trying to run the current version of Adobe Air from the Adobe website. Please help.
Thanks,
Matt

Still no luck cant play LoL...Was having an issue with a asus start up file what was in the TEMP folder also said not found....deleted a registry for it and that one stopped coming up when the computer started...but i still cant install adobe air.

How do i fix this: error message- index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the ser

that is...
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
index.html
thanks!

It's under More Options triangle in the Manage Sites panel. See screenshot:
Nancy O.

Dreamweaver - FTP error occurred - cannot make connection

Hello I am trying to update a site and I am getting an error:
FTP error occurred - cannot make connection to host.
I absolutely did change any kind of FTP settings in the last 3 months.
Everything has been working fine up until now.
Justhost is who I use, I talked to there tech support they said they checked on there side and are able to connect and everything is working there, they are telling me it has something to do with dreamweaver.
The only thing new is a I did an update earlier to adobe creative cloud - I don't think that would be the problem though.
If anyone can please please help me or point in the right direction I will greatly appreciate it.
Thanks

Hello,
it's well known, that In all these cases you describe I'm not a friend of a detailed troubleshooting. To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

Re-installing windows 7 on L440 - Error windows cannot find .bat

Hi,
I am trying to re-install windows 7 enterprise on brand new thinkpad L440 with an image from my company's SCCM server. I loaded the package on a USB stick. It was able to install T440P with no issue but I get the error ( windows cannot find bat make sure you typed the name correctly)
What is the cause of this problem. I need to rebuilt these machines ASAP but I am stuck with this error.

Hi,
I am trying to re-install windows 7 enterprise on brand new thinkpad L440 with an image from my company's SCCM server. I loaded the package on a USB stick. It was able to install T440P with no issue but I get the error ( windows cannot find bat make sure you typed the name correctly)
What is the cause of this problem. I need to rebuilt these machines ASAP but I am stuck with this error.

An FTP Error occured - cannot make connection to host. No response from the server

"An FTP Error occured - cannot make connection to host. No response from the server".
As of today this is all i get when trying to connect to every single ftp account i have. It's not the server cause it's every one and there is several different. Tried passive and non-passive same result. I've connected fine with other FTP clients. So this must be another dreamweaver bug. Anyone know what to do?

Very hard to diagnose these problems, particularly as you can connect using a 3rd party program.
See if the 'timeout' issue could be at play here:
http://forums.adobe.com/message/708941#708941

Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.

Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.
Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table. On EFI Systems, Windows Can Only Be Installed to GPT.
I found one solution to this problem on hp forum but my laptop has boot legacy and does not disable the efi boot order.
HP Model# HP 1000-1140TU Notebook PC
Serial# 5cg2481dbg
Product# c8c94pa#uuf
This is solution which is found on hp forum
SolutionThe resolution to this issue depends on the the hard disk volume size:
Follow these steps if the hard disk volume size is less than 2.19 TB:
Temporarily disable the EFI Boot Sources setting in the BIOS:
Restart the computer, and then press F10 to enter the BIOS.
Navigate to Storage > Boot Order , and then disable the EFI Boot Sources .
Select File > Save Changes > Exit .
Install the Windows operating system.
Enable the EFI Boot Sources setting in the BIOS:
Restart the computer, and then press F10 to enter the BIOS.
Navigate to Storage > Boot Order , and then enable the EFI Boot Sources .
Select File > Save Changes > Exit .
Follow these steps if the hard disk volume size is greater than 2.19 TB:
Install the HP BIOS Update UEFI utility from the HP Web site:
Click here to access the document "HP BIOS Update UEFI" .
NOTE:The HP BIOS Update UEFI utility is installed by default on some HP computers.
Follow the steps in the Microsoft document titled "How to Configure UEFI/GPT-Based Hard Drive Partitions" (in English) to create a GPT partition.
Click here to access the document "How to Configure UEFI/GPT-Based Hard Drive Partitions" .
NOTEne or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside the HP Web site.

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

Getting the error "Windows cannot find '-Xmx128m' "

Hi all,
When I try to I execute workbench.cmd, downloaded with OracleR TopLink 10g Release 3 (10.1.3), I am getting the error "Windows cannot find '-Xmx128m' .Make sure that you typed the name correctly...." .Further, my application is based on Java Swing and not a web application.
I made the following changes in the <TOPLINK_HOME>/bin/workbench.cmd file :
a) Set the 'JAVA_HOME' to the JDK path, same as that given in the
Environment Variables setting.
b) Set 'DRIVER_CLASSPATH' to point to
<TOPLINK_HOME>/jlib/classes12.jar.
My System configuration is as follows :-
Operating System : WindowsXP
JDK Version : JDK1.4.1
Data Base Client : Oracle9i
Data Base Server: Oracle8i
Can anyone please suggest any solution for this problem.I 'll be very thankful.
Regards,
Manju

Have you run across this thread while trying to resolve this problem - How to start Workbench (Toplink 10g) Not sure if it applies to your situation, but thought it might be helpful.
If this doesn't help, perhaps you can paste the contents of your workbench.cmd file into this thread and we can try to debug the issue further.
Neil

An ftp error occurred cannot make connection to host DW CS4

OK... I just recently installed Dreamweaver CS4. I am trying to connect to a clients site and I keep on getting the following error:
an ftp error occurred cannot make connection to host. the remote host cannot be found
A couple of days when I was in DW CS3, I never had this problem, apparantly others have also had this problem however all the help that I have seen is for PC.
When I entered all of my info, I then proceeded several times to 'Test' , I have been able to connect succesfully but when I try to connect to remote host, I get that error message.
Please help!!!!
I am using Mac OS X Version 10.5.8

Hi,
In the remote info tab, Access-> FTP, click on Server Compatibility button.
Uncheck FTP Perfomance Optimization.
Try to re-connect to your web server.
OR
In the FTP field, you don't have to type the protocol (ftp://....)
Martin

I need help getting past the installation error "windows cannot fint TEMP file"

I need help getting past the installation error "windows cannot find TEMP file"

Seems like some who have tried two devices on the JMICRON IDE port have had trouble. Try without the hard drive and see if you get that error. If that is the case I would try a PATA to SATA converter for your hard drive and connect it to one of the Intel SATA Ports.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812107112
http://www.amazon.com/ADDONICS-IDE-SERIAL-CONVERTER-ADIDESA/dp/B000090169
http://www.compusa.com/products/product_info.asp?product_code=339900#ts
http://www.xpcgear.com/ide2sata.html
http://www.ubuyitdirect.com/-p-1045.html?currency=USD
http://www.satasite.com/sata-ide-converter.htm
http://www.pcgears.com/default.aspx?oid=187150

One of my sites still connects but the other gets An ftp error occurred cannot make connection to host.

My problem is in “connect to remote server”. I manage two sites in Dreamweaver CS6, and they are hosted by the same guys. One site still connects fine but the other one has stopped connecting. With the second site when I click on the button I get a delay then "An ftp error occurred -- cannot make connection to host".
However I can still access the second site’s remote server through an FTP program, and the Host tech support confirms my login is working fine from his computer.
I tried doing this old trick (1) Site > Manage Sites > Export to create a .ste file (2) quite, restart (3) Manage Sites > Import the .ste file (4) click on connect to remote server -- But that made no difference

Just because both sites are hosted by the same firm doesn't mean they are on the same physical server. Your problem connecting could be attributable to many things.
User name and password may have changed or been reset.
Server permissions problems (GoDaddy is notorious for this).
IP blocking.
Server is down.
etc...
Are you able to connect with a 3rd party FTP client like FileZilla? If not, I'm guessing this is a server problem & you need to contact your host.
Nancy O.

FTP Error Occurred - Cannot make connection

I've been receiving this message:
"An ftp error occurred - cannot make connection to host. Your
login or password is incorrect. Please check your connection
information."
when trying to set-up and download active websites originally
built in FrontPage. Do Dreamweaver & FrontPage not play well
with each other? Why would that affect my being able to connect to
my websites via Dreamweaver? I have double and triple checked the
logins and passwords. They are correct. Also, I have no problem
setting up and uploading a new site.
Remote Info Site Definition Settings:
Access: FTP
FTP host: www.mywebsite.com
Host directory: blank
Login: my login
Password: my password
I've:
tried with passive FTP checked and unchecked
tried with Secure FTP checked and unchecked
Unchecked FTP performance Optimization in Server
Compatibility
Thanks to anyone who can help :)

No. My sites that I created originally in Dreamweaver work
and connect fine. I've compared the settings and I have them set
the same. It's driving me nuts, to say the least!!

FTP Error : Windows cannot acces folder ..... Details : Element not found

Similar Messages

Maybe you are looking for