FTP Fails in Dreamweaver MX, Same Config Works in CS5
I've been using Dreamweaver MX for about 5 years and have been using FTP throughout that period. About a week ago FTP started failing with the error message "An FTP error occurred - cannot make connection to host." My FTP log is blank, as if it did not attempt to make an FTP connection. If I save my site config and using that same site config in Dreamweaver CS5, then I can connect and use FTP without issue. I can also connect with other FTP programs, such as Filezilla. This confirms that I am using correct login information, and FTP is available for the website. Switching to passive FTP did not help. Removing and re-installing Dreamweaver MX did not help. Turning off all my firewalls did not help. Searching around the web, one person mentioned a similar issue being caused by the server that maintains the website changing their SSH host key changing and were able to resolve that by deleting Dreamweaver's ssh host file. For him the file was at ~/Library/Application Support/Dreamweaver 8/Configuration/ssh_hosts. However, it seems to be in a different location for Dreamweaver MX on my Widows 7 computer. Any ideas on what might be causing this or what I could try?
BarakObi wrote:
How about if you take a gamble and reinstall your DW MX? It could solve the problem. IMHO
Well - this is a very good suggestion but what puzzles me is why should a software that worked for 5 years suddenly stopped working. This is completely beyond any sensible reasons.
I think the MX was initially working in either Windows 2000 or Windows XP and now the NA770 decided to install the same product in Windows 7. If this is so then it looks like it must be a question of rights attached to that user. The OP should, perhaps try using as an ADMINISTRATOR or a USER account with those privileges to see if it is anything to do with the rights/security issues of Windows 7.
We don't know if the product is still running on the old operating system/machine. 5 years ago we didn't have Windows 7 and MX was released well before XP was released.
I am reluctant to suggest to reformat the HD and clear any bugs that might have entered the system but it is up to the OP to decide now.
There is no solution to this problem assuming all the configuration settings are correct as claimed in this thread.
Similar Messages
-
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
FTP Connection Issues Dreamweaver CS5.5
I can't ftp into the top level directory of any of my hosting accounts with dreamweaver cs5.5
This is becoming a major issue and I'm aware now of other users with the same issue.
First log in to an ftp server works fine - the test case directory is created and deleted - and I think it is this which is causing some odd permissions issue.
Second time you try to log in, the connection is made, but then any directory listing times out. However if I define a directory such as /public_html/images/ then it will connect and display directory listings just fine. Clicking "Test" in the server definition dialog results in an OK message.
If i FTP in using a different FTP Client (in this case Transmit) and upload a single file, the issue goes away, and dreamweaver can again connect - one time only, until I perform this odd "reset".
This happens on all FTP connections across multiple hosting companies (all of the hosting companies my clients sites are stored at).
FTP log is below:
< 257 "/www"
< 220 Welcome to Proweb Server FTP service (JubJub).
> USER winfo
< 331 Please specify the password.
> PASS
< 230 Login successful.
> PWD
< 257 "/"
> CWD /
< 250 Directory successfully changed.
> CWD /www
< 250 Directory successfully changed.
> PWD
< 257 "/www"
Then it waits for a while before giving me the following error message (I've extended timeout to anything up to a couple of minutes, no difference):
Toggling the "USE Passive FTP" checkbox may help you establish a connection. -Select or de-select the checkbox and click Test to tray again.
-if you are connecting using an IPv6 enabled server, please select the "USE IPv6 transfer mode" checkbox in the Advanced site definition dialog.
If the problem persists, check you network settings, including the local firewall settings on your computer, or consult your network administrator.
I have tried PASV checked and unchecked, performance optimisation, and every other combination available to me. I am not connecting through a proxy.
The settings on ALL of my sites worked before the cs5.5 upgrade. The settings on NONE of my sites with a root directory specified work since the upgrade. The only thing that has changed is the move to dreamweaver cs5.5. I can connect with other ftp clients. my ftp server settings are correct. My server and network settings are unchanged. The settings on ALL my sites on other FTP clients continue to work fine.
Am on an i7 2.8GHz Intel iMac running 10.6.7 with 8 gigs of RAM. I have quit all software except dreamweaver and tried running my mac firewall both on and off.
Really running out of ideas, and know of other people with the same issue since the upgrade - what's going on Adobe?!Same for me, in that I had an unreliable and effectively unusable FTP connection with CS5.5 . I've reverted to CS5, because even though I'll miss a couple of the new features I need to have a working connection to the site when working with PHP - because otherwise I can't see my site at all other than via Firefox. I also suspect that at least a couple of times I've had some sort of corruption occur as a result of the FTP hanging. All was okay before CS5.5, and I may have slagged off a different hosting provider than my present one when it was in fact (at least in part) a DW issue. If it isn't fixed in CS6 then CS6 is unusable for me and I'd definitely be happier with 'unenhanced' CS5 FTP functionality. The theoretical performance gains with the CS5.5 implementation are trivial by comparison with the problems. If all else fails, please revert to CS5 code for the FTP side of things.
UPDATE!!!!!!!!!!!!!!!!!!!!!!! This is now fixed for me. The problem was that I did not have a proper web url entered in my site definition for the remote server. I'm not sure how that was placing any limitation on FTP access - after all, the need for a full site definition was removed a couple of software issues ago - but the fact is that with the correct web address entered I have working FTP on CS6 (and seemingly on CS5.5 too). I had a simple forward slash entered for the web address, probably as a result of some earlier investigation of the local server/remote server relationships for file upload on a PHP site. I was running CS5 with the correct Web Url entered, so that was working and the CS5.5, without the correct Web Url, was not. I vaguely remember reading that the Web Url was connected with DWs management of absolute/relative links and not much else, but it seems that is not the case. The new FTP is MUCH faster and I'm a happy guy. Site menu>>>Manage sites>>>[select your site]>>>Edit>>>Servers>>>[2-click your server]>>>Web URL: Put in the full URL e.g. http://www.somesite.com . Not sure if you need a trailing / after, but I have one.
UPDATING AGAIN: Through all of that I had turned on the 'IPv6 protocol' and 'Passive FTP' options in an attempt to get working. The result of that was FTP that worked well once transferring files but often took a while to hook up. Deselecting those, and using CS6, I'm happy with my FTP. -
Problems with FTP connection in Dreamweaver 4
I hope someone can help me with the following:
Since recently I can only connect to the FTP host within
Dreamweaver once a day.
I have two defined sites in my Dreamweaver 4 and before I
could connect several times a day both sites - no problem.
But now it connects once and then when either trying to
connect to the other defined site or perhaps a while later to the
first site again (where I connected well on the same day already) I
am getting the error message: 'FTP error - connection to the host
cannot be madet'.
Basically it will now always only connect daily once.
Anyone any idea what is causing this?
Many thanks for your help.These issues are most often associated with your firewall.
Please try
disabling it altogether.
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"NicknamecomputerABC" <[email protected]>
wrote in message
news:g5f3d6$4p1$[email protected]..
>I am using Windows XP.
>
> Am using passive FTP (this is ticked, when the
connection works)
> but also tried unticking it, still the same error
message.
>
> Yes, contacted my host.
> Actually just changed hosts and the previous one, where
the same problem
> started a while back, didn't help, mentioned something
like, that's the
> 'limitation in Dreamweaver' --- though this doesn't make
any sense, I
> think,
> as it did work before for years?
> Contacted also my new host, slightly more willing to
help, had me check
> several things (also running "command" to see whether I
connect to their
> server, and I did.
>
> Am using a AVM FritzBox (but also used that one when it
all worked without
> problems), it has also now FTP enabled i.e allowing port
21.
>
> What I find so strange is that it does connect, just not
more than once
> a
> day any longer,
> so the settings must be right.
>
> I am using AVG antivirus, but also tried to not using
it, or not using
> their
> shield (firewall) but still the same.
>
> I have also tested a third party FTP client (FileZilla)
but there I am
> getting
> the following message:
> Status: Connection established, waiting for welcome
message...
> Error: Could not connect to server
>
> So cannot even connect with FileZilla once.
>
> Not sure where I can see the FTP log window? (Or is this
the message above
> from FileZilla?
>
>
> Many thanks for your assistance.
>
> -
BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) env
Hello,
BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) environment
Step 1: Build a asynchronous BPEL process which has no extra node. Make and deploy it in 'local windows desktop SOA' server
The BPEL process has three nodes:
a. client - on the left side of the swim lane
b. receiveInput - first node in swim lane (client calls 'receiveInput')
c. callbackClient - second and last node in the swim lane ('callbackClient' calls client)
Step 2: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
Step 3: Now, I can see the successfully completed BPEL instance in the BPEL console.
Now,
Step 4: Deploy the same BPEL process (dummy asynchronous) in the SOA server (hosted in unix box)
Step 5: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
Step 6: I find that the BPEL instance appears to have ended in error (on the second node i.e. callbackClient )
With the following error message
+<invalidVariables xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>9710</code>+
+</part><part name="summary"><summary>Invalid xml document.+
According to the xml schemas, the xml document is invalid. The reason is: Error::cvc-complex-type.2.4.b: The content of element 'DummyBPELProcessProcessResponse' is not complete. One of '{"http://xmlns.oracle.com/DummyBPELProcess":result}' is expected.
Please make sure that the xml document is valid against your schemas.
+</summary>+
+</part></invalidVariables>+
Has anyone faced similar issue as above ?
i.e. process works find in windows environment (local SOA), but fails in SOA server in UNIX environment
Appreciate your help in understanding this issue.
Thanks,
SanthoshHello,
The fix to this issue appears to have been as follows:
+<schema attributeFormDefault="unqualified"+
+ elementFormDefault="qualified"+
+ targetNamespace="http://xmlns.oracle.com/DummyBPELProcess"+
+ xmlns="http://www.w3.org/2001/XMLSchema">+
+ <element name="DummyBPELProcessProcessRequest">+
+ <complexType>+
+ <sequence>+
+ <element name="input" type="string"/>+
+ </sequence>+
+ </complexType>+
+ </element>+
+ <element name="DummyBPELProcessProcessResponse">+
+ <complexType>+
+ <sequence>+
+ <element name="*:result*" type="string"/>+
+ </sequence>+
+ </complexType>+
+ </element>+
+</schema>+
In DummyBPELProcess.xsd,
modifiying "result" to ":result" appears to have resolved the issue in SOA under unix environment.
If anyone can explain why "result" works in SOA under windows and ":result" works in SOA under unix environment, I would really appreciate your help.
Thanks,
Santhosh -
LSMW fails when run in B/G works fine in Frontend..why?
Hi All,
i am trying to runa batch process by LSMW, my files are accurate, no problem with them, everything works fine but it fails when run in BG..works absolutely fine in front end. whats the diff with running in B/G?
same thing happens when i am trying to execute an RFC thru SAP JCO, it works when debugger is on 9i guess switching on debugger is similar to running in B/G) but it doesnt work when debugger is off. but when i execute that RFC directly in se37 from SAP gui it works fine..fails when connected to JCO..
i am not having this issue with r/3 4.6c or mySAP ECC.6.0 i have this issue only in r/3 4.7.
has anyone faced the similar situtaion? pls help.
thanks.
p.s if this may help. the RFC and LSMW error both are pertaining to change in address of US employees.( infotype 0006)for LSMW its the recording of transaction PA40 (employee hire fails when filling address details) and PA30 (change address) and same is the case with RFC..well its a BAPI_ADDRESSEMPUS_CHANGE.
To eloborate more..the error is..Fill in all the mandatory fields.
which i am very much doing..there are no hidden fields or anything..i have seen the screens etc..I AM filling all mandatory fields. infact i am not leaving anything unfilled., same scrren is going fine when in front end..i am just clicking ok..ok..ok and boom transaction complete..no complaints. but running B/G is killing me.
i have to run batch for 100,000 employees
What fails my logic is..its working fine in 4.6c and mySAP ECC.6.0 but not in 4.7
Hruser
Message was edited by:
Hruser -
Windows event log shows AzureDiagnostics errors "Failed to parse the WAD config file" and warning "
No certficate with given thumbprint found in the certificate store. Thumbprint:" and
System.ArgumentNullException: Value cannot be null.
Parameter name: s
at System.IO.StringReader..ctor(String s)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Validate(String configString, String schemaPath, StringBuilder builder)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Initialize(String configString, String schemaPath)
at Microsoft.Azure.Plugins.Plugin.WadParser.Parse()
Also tried a different deployment on a different subscription, same issue, and this one gets stuck in 'create' state with no roles showing up in 'instances' section for quite some time. Are Cloud Services even maintained by Microsoft
anymore? Seems that they are second class citizens to VMs, no updates, no new portal, no new features, often can't update single role without updating all roles, etc.i am facing same error : here is the log:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Starting DiagnosticPlugin.exe DiagnosticPlugin-ShutdownEvent DiagnosticPlugin-TotalShutdownEvent -wadVer1v3
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Starting DiagnosticsPlugin
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Checking VM Type
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] File HandlerEnvironment.json not found. Extension set to PAAS
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] RcfFileName: C:\Config\881bb2e524c04870b4e993fd8fefb7d8.881bb2e524c04870b4e993fd8fefb7d8.WorkerRole1_IN_0.13.xml
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] RoleInstanceId: WorkerRole1_IN_0; DeploymentId: 881bb2e524c04870b4e993fd8fefb7d8; RoleName: WorkerRole1
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Checking VM Type
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] File HandlerEnvironment.json not found. Extension set to PAAS
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Store Size: 4096
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Reading XML configuration file
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Will use thumbprint
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Decrypting private configuration
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:00:39 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Retrying after 30 seconds. Retry attempt 1
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:01:09 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:01:09 PM] Retrying after 30 seconds. Retry attempt 2
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:01:39 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:01:39 PM] Retrying after 30 seconds. Retry attempt 3
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] System.Security.Cryptography.CryptographicException: The enveloped-data message does not contain the specified recipient.
at System.Security.Cryptography.Pkcs.EnvelopedCms.DecryptContent(RecipientInfoCollection recipientInfos, X509Certificate2Collection extraStore)
at Microsoft.Azure.Plugins.Diagnostics.dll.PluginConfigurationSettingsProvider.DecryptPrivateConfig(String encryptedConfig)
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] WadCfg is provided in initial configuration. Using that to initialize Diagnostics.
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] <PublicConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<WadCfg>
<DiagnosticMonitorConfiguration overallQuotaInMB="4096">
<DiagnosticInfrastructureLogs />
<Directories scheduledTransferPeriod="PT1M">
<IISLogs containerName="wad-iis-logfiles" />
<FailedRequestLogs containerName="wad-failedrequestlogs" />
</Directories>
<PerformanceCounters scheduledTransferPeriod="PT1M">
<PerformanceCounterConfiguration counterSpecifier="\Memory\Available MBytes" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\ISAPI Extension Requests/sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\Bytes Total/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Requests/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Errors Total/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Queued" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Rejected" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Processor(_Total)\% Processor Time" sampleRate="PT3M" />
</PerformanceCounters>
<WindowsEventLog scheduledTransferPeriod="PT1M">
<DataSource name="Application!*" />
<DataSource name="System!*" />
</WindowsEventLog>
<CrashDumps dumpType="Full">
<CrashDumpConfiguration processName="WaAppAgent.exe" />
<CrashDumpConfiguration processName="WaIISHost.exe" />
<CrashDumpConfiguration processName="WindowsAzureGuestAgent.exe" />
<CrashDumpConfiguration processName="WaWorkerHost.exe" />
<CrashDumpConfiguration processName="DiagnosticsAgent.exe" />
<CrashDumpConfiguration processName="w3wp.exe" />
</CrashDumps>
<Logs scheduledTransferPeriod="PT1M" scheduledTransferLogLevelFilter="Verbose" />
</DiagnosticMonitorConfiguration>
</WadCfg>
<StorageAccount>vinaystorageaccounttest</StorageAccount>
</PublicConfig>
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] Private setting is loaded
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] System.ArgumentNullException: Value cannot be null.
Parameter name: s
at System.IO.StringReader..ctor(String s)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Validate(String configString, String schemaPath, StringBuilder builder)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Initialize(String configString, String schemaPath)
at Microsoft.Azure.Plugins.Plugin.WadParser.Parse()
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] Failed to parse the WAD config file
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] DiagnosticPlugin.exe exit with code -106 -
I am having trouble installing Adobe Master Collection CS6 on my new laptop. I encounter Error 6 when I try installing PS, AI, and ID, and it says I am not meeting OS requirements. Illustrator prompts another error: Display requirements not met. ( I'm very confused, because the same installation worked just fine on my old machine... No errors when I did it the first time. I have no idea why I'm running into errors now?) I'm getting warning DW066, DW065, DF029, fatal DS003, and error DW050.
New Laptop Specs:
- Asus 14.1" touchscreen Win 8.1, 64 bit OS
- Intel Core i.5, 1.70 GHz
- 6 GB RAM, Screen Res 1366x768 32 bit color
Old Laptop Specs:
- Asus 15.6", Win 8.1 (no touch screen), 64 bit OS
- Intel Celeron processor, 1.5 GHz
- 4 GB RAM, Screen Res 1366x768 32 bit color
Thank you! Help is greatly appreciated.I did as you suggested, and the logs came up with these:
FATAL: DS003: Cannot extract 'E:\Programs\Adobe CS6\payloads\AdobeCMaps4-mul\Assets2_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{E8B1DAAA-0B6B-44E6-A2D3-8E418EA0EA85}'. Error: Error 2 The system cannot find the file specified.
----------- Payload: {99290358-A784-4218-A7BA-954AE5F9207C} AdobeCMaps x64 CS6 4.0.0.0 -----------
FATAL: DS003: Cannot extract 'E:\Programs\Adobe CS6\payloads\AdobeCMaps4_x64-mul\Assets2_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{99290358-A784-4218-A7BA-954AE5F9207C}'. Error: Error 2 The system cannot find the file specified.
----------- Payload: {BB66788C-4C4F-4EB0-B146-9178857DE287} AdobeColorNA CS6 4.0.0.0 -----------
FATAL: DS003: Cannot extract 'E:\Programs\Adobe CS6\payloads\AdobeColorNA_Recommended4_0-mul\Assets2_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{BB66788C-4C4F-4EB0-B146-9178857DE287}'. Error: Error 2 The system cannot find the file specified.
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Programs\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
----------- Payload: {3071EDD7-EA5B-4CAC-B4D0-4D4D664154D1} Adobe Photoshop CS6 English Language Pack_AdobePhotoshop13-en_US 13.0.0.0 -----------
FATAL: DS003: Cannot extract 'E:\Programs\Adobe CS6\payloads\AdobePhotoshop13-en_US\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{3071EDD7-EA5B-4CAC-B4D0-4D4D664154D1}'. Error: Error 2 The system cannot find the file specified.
----------- Payload: {29A80A19-9E35-455A-AF9D-B39AE5B3035D} Adobe Photoshop CS6 English Language Pack_x64_AdobePhotoshop13-en_US_x64 13.0.0.0 -----------
FATAL: DS003: Cannot extract 'E:\Programs\Adobe CS6\payloads\AdobePhotoshop13-en_US_x64\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{29A80A19-9E35-455A-AF9D-B39AE5B3035D}'. Error: Error 2 The system cannot find the file specified.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Bridge CS6 (64 Bit): Install failed
ERROR: DW050: - AdobeColorVideoProfilesAE CS6: Install failed
ERROR: DW050: - Adobe Toolhints CS6: Install failed
ERROR: DW050: - Adobe Photoshop CS6 English Language Pack_x64_AdobePhotoshop13-en_US_x64: Install failed
ERROR: DW050: - Adobe InDesign CS6 Icon Handler x64: Install failed
ERROR: DW050: - Adobe Photoshop CS6 English Language Pack_AdobePhotoshop13-en_US: Install failed
ERROR: DW050: - Adobe Photoshop CS6 Core_x64: Failed due to Language Pack installation failure
ERROR: DW050: - AdobeMotionPicture CS6: Install failed
ERROR: DW050: - Adobe After Effects CS6: Failed due to Language Pack installation failure
ERROR: DW050: - DPS Desktop Tools CS6: Install failed
ERROR: DW050: - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: Install failed
ERROR: DW050: - AdobeIdeaPluginCS6 x64: Install failed
ERROR: DW050: - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe NPS Panel: Install failed
ERROR: DW050: - Adobe Illustrator CS6 Core_AdobeIllustrator16en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Bridge CS6: Install failed
.. and the same DW050 errors continue for all there rest of the programs. -
Dreamweaver CS6 "has stopped working" when closing
Hey, I recently upgraded to Windows 8 x64 and have had an annoying issue with Adobe Products. When I was using 7 x64 I never had any issues really, loved that OS.
Whenever I close Dreamweaver or Fireworks, a Windows error comes up saying "Dreamweaver/Fireworks has stopped working".
Problem signature:
Problem Event Name: APPCRASH
Application Name: Dreamweaver.exe
Application Version: 12.0.0.5808
Application Timestamp: 4f7617ae
Fault Module Name: AdobeOwl.dll
Fault Module Version: 4.0.93.0
Fault Module Timestamp: 4f346283
Exception Code: c0000005
Exception Offset: 0001157a
OS Version: 6.2.9200.2.0.0.256.48
Locale ID: 2057
Additional Information 1: 3a47
Additional Information 2: 3a47ea20b483aa4e0461b1291937432c
Additional Information 3: 7401
Additional Information 4: 740143976bb56a80bf42b1f8198b069d
I recorded a video of the issue here: http://www.youtube.com/watch?v=ngljTTOz9gM
Please could someone tell me how to solve this, thanks in advance.Ive found out the issue after googling the application timestamp and seeing another user with the same issue, here: http://forums.adobe.com/message/4682036
The problem is with the Quick Connect button in TeamViewer and instructions on how to fix this issue can be found here: http://forums.adobe.com/message/4131161#4131161 -
I just upgraded to DW 5.5 included in my master collection, I'm connecting to FTP no problem, but I'm unable to upload to the ROOT folder only.
I can upload to any other folder, for example, images in the assets, swf in the flash folder etc.
Premission are correct, godaddy hosting upper tier support thought they fixed a rare problem on there end.
Turns out they can upload to the root folder on there end but not on mine through dreamweaver 5.5. FTP
Any else have this problem and know how to fix it? Fillezilla is my only option right now.
Big thanks.Yet another GoDaddy/DW ftp problem... Since DW works pretty well with everything BUT GoDaddy, I keep saying this is a GoDaddy problem.
They may be the biggest, but that CERTAINLY doesn't mean they're the best. -
Hello ,
I have three WLC's - WLC1, WLC2 and WLC3. They are part of mobility groups. I need WLC-2 and WLC-3 to have the same config of WLC-1.
If I upload the WLC-1 configs on WLC-2 and WLC-3 , will it work ?
Thanks
Hi,
upload the config from WLC1.
Make changes(Ip adderss..and dynamic interface ip...etc) in config for WLC2 and then download to WLC2 by chossing command > Download from wlc gui, and same for wlc3.
Regards -
Video Freezes in Firefox. Also links from email don't work(404) (same link works in chrome)
Most videos freeze after 5-15 seconds if the mouse is not hovering (and moving) in the video window.
Also many sort URL links from email (Open in new Tab) fail with 404 error. Videos don't freeze and same links work fine in Chrome.
Searched problem using Google and followed several pieces of advice -- same problem.
Removed all add-ons and extensions - same problem.
Removed Firefox 24, Reinstalled using latest version 25 (import nothing) -- same problem
Replaced Firefox with version 22 and it seems to be working fine.
Dell Latitude E6430
Windows 7 Professional Service Pack 1 (64 bit)
16GB Ram'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon. -
Lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.
lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.
Reh... Doesn't work on my 2012 Mac mini. A function key set in Sys Prefs worked in Leopard and Lion on my MB but I cannot get any key to work using SysPref Dictation & Speech. It is befuddling and now I have to go to Edit-Speech to turn on and turn off speech to selected text.
I have used Macs and Apple 2es since cave man days and Apple is becoming so befuddling I am wondering if there is even an advantage to it over Windows XP. I spent a lot on this little box, it looks good (the first one had to be exchanged as it wouldn't link to my keyboard ???) but Apple intuitive does no longer seem meaningful.
If speech to text no longer is accessible by short cuts using Fkeys, why bother to have it in Syst Prefs?
Apple is losing its way. The pleasure is gone and no one at Apple seems to care. -
I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
What is wrong with Apple's support of printers ... inability for MacBook Pros to connect with HP and other printers. Yet the same printers
work under Mac OS based Parallels (running Windows or Ubuntu) - WHY? Finger pointing (HP . Apple ... Apple > HP) ... who cares ... FIX IT ... this has gone on for months now. WHAT IS THE PROBLEM?HP discontinued support (read: stopped updating their OS X printer drivers) for a lot of their printers back when Apple released Snow Leopard and dropped even more when Lion was released. This is an HP problem, not an Apple problem.
Exacty what printers are you having problems with?
If any of your printers are on the HPIJS list, try installing the HPIJS drivers (there are 3 files to install, and it won't hurt anything). This solved the issue for me on Snow Leopard, Lion and Mt. Lion with my older HP printers.
Maybe you are looking for
-
After syncing fine for months, my Mac Mini last week reported an "unknown" error after trying to sync with my 2G iTouch. Then it suddenly stopped detecting the iTouch altogehter. The facts are these: 1) iTunes 8.2.1 (6) 2) OS X 10.4.11 3) iTouch OS 3
-
Service Entry Sheet & Accounting number range
Dear Experts, While I'm trying to Release a Service Entry Sheet this error appear : +Error analysis+ +Short text of error message:+ +Document number ENR 5000000000 2010 was already assigned+ +Long text of error message:+ +Diagnosis+
-
Favorites open from Organize Entries loose portal Framework Components
Hi All We have created our portal desktop using portal's EFP feature and we have the "Portal Favourite" functionality included in our masthead iview on the same lines as that of default portal. While opening the favourites links through Organize Ent
-
I cannot access my PDF to doc converter. i have entered my usename and password but nothing.
I cannot access my PDF to Doc converter. i have set up a subscription and the necessary passwords but nothing!
-
Blazing fast internet connection, but still taking 4 hours to download a movie on Apple tv?
This apple tv has been nothing but a huge pain in the *** so far. I started watching a movie that I rented and then it stops 20 minutes into the movie and says it will need between 3 and 7 hours to download the rest and be ready to play. ***?