Ftp issue (and some netstorage and iFolder as well)

Nw 6.5Sp8 updated ftp to the latest patch.
My issue is very simple: It only list the files to a certain point in a directory. So is there a parameter I need to set in order to get it to read all, or is it not just possible to read all the way, or is it related to my ftp-client (fireftp in firefox - not very likely as I never have seen it before but it can be)?
So I tried to use iFolder and/or Netstorage from the web interface. No problem I can see all files, but retrieving don't work. Right click download and nothing happens. I must admit I found a workaround yesterday, but I have forgotten what I did - at the time it was just important to get a grip at the file.

On Fri, 16 Aug 2013 13:06:01 +0000, SteenGrode wrote:
> Nw 6.5Sp8 updated ftp to the latest patch.
>
> My issue is very simple: It only list the files to a certain point in a
> directory. So is there a parameter I need to set in order to get it to
> read all, or is it not just possible to read all the way, or is it
> related to my ftp-client (fireftp in firefox - not very likely as I
> never have seen it before but it can be)?
What happens if you use actual ftp, not some GUI browser plugin ftp thing?
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.

Similar Messages

More CS6 FTP Issues..??

I see quite a few threads about problems with FTP in CS6, but nothing specific to what I'm seeing.
I can setup FTP accounts just fine and the test works as expected. I can upload files and I don't have problems loading the pages like some have talked about (and what looks like a patch was released for).
What I am seeing, though, is that if I try to upload groups of files at a time it will often upload 1 or 2 and then just stop. Then if I view Remote and try to refresh it shows "nothing". So then I have to disconnect and reconnect, and then it shows everything again. At this point I can generally upload a group of files...but only once.
It seems like everytime I upload anything I have to switch to remote and disconnect and connect again to upload something after that.
Also, the syncing is all messed up. I'm working on a site where I made a change to my Dreamweaver template, and as such lots of files on the site were updated. Then I went to sync but everything gave me the red error icon showing that it couldn't figure out which one was newer and I had to manually specify that it should upload my local version for everything to the remote server.
Then, about 10 min later, I made another change to the template. I went to sync again, but once again, almost all my files were telling me it couldn't figure out which one was newer and I had to manually specify again.
What's strange is that some of the files are working fine and don't seem to have an issue...it just knows those need uploaded. About 90% of my files, though, are forcing me to manually tell it what it to do every time.
I see in the "what's new" videos that Adobe apparently made some changes to FTP and say it's a lot faster now becuase it allows for multiple connections. I was very excited to hear that, but now with all the issues I'm having and the other threads I see about problems with FTP in CS6 I'm almost wishing I wouldn't have upgraded.
Any information on how I can get this working the way it should be would be greatly appreciated. Thanks!

Adobe is working on a variety of FTP issues, and is making available a patch. You can contact the Dreamweaver team directly to get a copy of the patch: http://forums.adobe.com/message/4541472#4541472.

FTP login and password are not saved on some sites

On some of my sites the FTP login and password are not saved
(even though the "saved" box is checked). Dreamweaver 8.0 on XP
SP2. I can export the site information and then import the same
file exported and there still will be no login or password placed
in the login or password window. I opened the exported .ste files
in notepad and found the login correct and the password incorrect.
I uninstalled Dreamveaver and reinstalled still same
problem.

Ok, I just spent about 3 hours on this. Here's the latest
that I've found. I had looked at the knowledgebase and my registry
matched what was suggested. As this has been an ongoing issue for
me, I thought it was still an issue. Apparently 8.02 did have some
improvements.
I can only guess that many of the 36 sites I have in the Site
Manager lost info before the .02 update.. or I hope so.
I did however discover that there is still what could be
considered a minor bug. I went in to Manage Sites and selected edit
for all of my sites, fixing the ones that had lost their user/pass
info. I'm not positive, but I think only the last edited site kept
it's data.
I discovered after many checks on all the sites, over and
over and over, that it appears that they are now holding the data,
but, if I add the user/pass, I must not only click the OK button to
close that particular site, but I must also click the 'Done' button
before only that one will be saved.
So, I thought I was fixing logins when in fact I was only
fixing one at a time.. Completely closing 'Manage Site' seemed to
hold one new set of login data each time. Seems that it shouldn't
be this way.
But I must say, I am rejoicing at the moment, as I actually
have all my sites set up with FTP info and I am now looking forward
to hopefully adding more and maybe they'll actually be available
for the next editing session.

Dreamweaver CS3 (9) maxed CPU slow performance and FTP issues.

Dreamweaver CS3 (9) maxed CPU slow performance and FTP
issues.
Never mind...I found it.
Of course I have all the firewall, worm, scanning, phishing
filtering, full time protect, and everything else turned off when I
am working on a remote/testing site however I found the Symantec
antivirus email scan being enabled (doesn't it just interact with
my email program?) was getting in the way of DW9 ftp operations,
causing some lagging that was putting DW9 into an unstable mode
during and immediately after (10 seconds) ftp operations.
The CPU still spikes to 99% during ftp functions but DW9
works even though it's likely taxed to the max but when I turn off
email scan DW9 returned to a functioning state during ftp and
remote file view. Whatever it takes huh?
PS: email scanning only never effected DW8.02
My System Info: properly configured (as in: everything works
or I fix it) Toshiba - XP pro SP2 – Pentium 4 - 2.3GHz
– 1.5 GB ram – Intel extreme graphics card 64 MB ram
– Apache 2.2 server – PHP 5 – MySQL 5 -
phpMyAdmin – Dreamweaver 8.02 – Interakt Kollection
3.7.1 – Dreamwweaver 9 - DeVtoolbox – Flash –
GoLive - Photoshop - ImageReady – Illustrator – Acrobat
– CuteFTP – Putty SSH - blabla...)

Thanks for the response. I managed to Google the 'nobody' account and found the explanation.
As you say, I assumed the 'syslogd' process had to do with system logs. I did check the console and couldn't find anything of particular interest in the logs.
I'll continue to monitor but if anyone has any further suggestions please post.
One thing that might also have an impact... my available drive space is now down to less than 5gb (runs anywhere between 1gb and 5gb free depending on what I'm running). I know this causes problems for Parallels as it keeps moaning at me, but would it cause any problems with OSX?
Thanks again,
Tom

I uninstalled itunes to fix some ipod issues, and now I tried to reinstall it but it says that it's already installed.

I uninstalled itunes to fix some ipod issues, and now I tried to reinstall it but it says that it's already installed. When I went to find the "icon" I can"t find it. When i looked in the download files I saw the downloads, but not the actual itunes "app". Please help thanks!

How did you uninstall it and what were your IPOD issues - that may help clarify the problem.

Hi Can anyone please tell me from where I cn download the Photoshop CS6 program I purchased a download (media less) some 2 years ago and all has been OK up to know but I am know having issues and would like to uninstall and reinstall. I have the revelant

Hi Can anyone please tell me from where I can download the Photoshop CS6 program I purchased a download (media less) some 2 years ago and all has been OK up to know but I am know having issues and would like to uninstall and reinstall. I have the relevant codes and activation keys but would need to be sure I can obtain the program again before I start. Thank you

Make sure you are dealing with the correct product for the serial number. If the serial number is for a full creative suite then you need to get the suite, not the individual application, and vice versa.
Unrelated to that, in case it helps, here is a link to another site. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

FTP Usernames and Password issues in DW 8 for Macintosh

Hi,
I have an issues in DW8 on Mac OS 10.4.9. Every so often, my
FTP usernames and passwords in the Dreamweaver site definitions
will swap. That means that the username from one site will now be
in the site def for another site. Nothing else ever swaps, e.g.,
the local paths, passwords, and other settings are fine. It is just
the usernames that seem to move from site to site at random. If I
have a test server set up for a site, it also happens there. I've
looked everywhere and can't find anybody else who has had this
problem. I know there is a similar issue on Windows with IE7, but
haven't seen anything on the Mac. This happens on both my G5 tower
and iBook. If anyone has any thoughts or suggestions, I would
appreciate it. It's not too big of an inconvenience, but it is
annoying. Thanks in advance!
Brian

Although it may not be the solution, have you installed the
8.0.2 updater?
http://www.adobe.com/support/dreamweaver/downloads_updaters.html
Regards
John Waller

Some confusing issues and their solution while working with InCopy stories.

Hi All, Last few months I have been working on InDesign/InCopy workFlow.I faced lot many problems and able to find solutions for some of them.I am putting down some of the problems I haved faced and the approaches I followed to get the solutions. So here I go... First I will put the issues I faced and then their common solution. Issue 1)A text frame exported as a InCopy file. InterfacePtr<IDataLinkReference> dataLinkReference(frameUIDRef, UseDefaultIID()); if(dataLinkReference == nil) break; UID linkUID = dataLinkReference->GetUID(); If(linkUID == kInvlaidID) Break; The linkUID is always equal to kInvalidUID. Issue 2)A graphics frame with image placed inside it and exported as an InCopy file. In this case the linkUID will have a valid UID. So the code ahead is UIDRef linkRef(frameUIDRef.GetDataBase(), linkUID); InterfacePtr<IDataLink> dataLink(linkRef, UseDefaultIID()); if(dataLink != nil) { PMString linkedFilePath = *(dataLink->GetFullName()); } so here the linkedFilePath will be the file path of the linked incopy file and not of that image file. Issue 3)A graphics frame with image placed inside it but without any associated InCopy file. The linkedFilePath is that of filePath of an image. The solution I found was.. The reason for this confusing behaviour is, InCopy frame has one more UIDRef associated with the InCopy story. So to get the incopy related UIDRef we have to use the following code. UIDRef incopyStoryUIDRef = Utils<IInCopyWorkFlowUtils>()->GetContainingInCopyStory(itemUIDRef); The problem with above api is in case of the graphic frame the itemUIDRef should be the UIDRef of the frame and in case of text frame the itemUIDRef should be the UIDRef of the text story i.e the text model. To get the proper UIDRef use following code //code start UIDRef storyUIDRef(frameUIDRef.GetDataBase()); InterfacePtr<IPMUnknown> unknown(frameUIDRef,IID_IUNKNOWN); if(unknown == nil) { break; } UID textFrameUID = Utils<IFrameUtils>()->GetTextFrameUID(unknown); if(textFrameUID != kInvalidUID) { isTextFrame = kTrue; UIDRef textFrameUIDRef(frameUIDRef.GetDataBase(),textFrameUID); InterfacePtr<ITextFrame> textFrame(textFrameUIDRef,UseDefaultIID()); if(textFrame == nil) { break; } ITextModel * txtMdl = textFrame->QueryTextModel(); if(txtMdl == nil) { break; } storyUIDRef = GetUIDRef(txtMdl); result = Utils<IInCopyBridgeUtils>()->IsInCopyStory(storyUIDRef); } else { isTextFrame = kFalse; result = Utils<IInCopyWorkFlowUtils>()->IsInCopyStory(frameUIDRef); storyUIDRef = frameUIDRef; } //code end. Then use UIDRef incopyStoryUIDRef = Utils<IInCopyWorkFlowUtils>()->GetContainingInCopyStory(storyUIDRef ); Once you have the proper incopyStoryUIDRef, the following code works uniformely and you will always get the incopy file irrespective of the type of frame. IDataLink * dLink = Utils<IInCopyBridgeUtils>()->QueryDataLink(incopyStoryUIDRef); if(dLink == nil) { break; } so dLink->GetFullName() will always give you the incopy file path associated with the frame. Hope this helps somebody working on InCopy stories. But I still could not find the way to find the image file path associated with the graphic incopy story.(refer issue 2 above.).Using above approach I always get the file path of associated incopy file. I will keep this thread updated as and when I encounter with some more issues and find their solutions. Thanks and Regards, Yopangjo.

I cannot explain why your iMac worked ok. I too have seen situations where "lower cost" WiFi routers like Belkin and LInksys have "sort of" worked but had problems.
Back in 2004 after buying a fairly large house I purchased an off-brand WiFi gateway that featured high power output so I could mount it centrally in the house and be able to use WiFi everywhere. Even though this thing was rated well and had the high-power everyone said would help it gave me continuous problems.
One day a buddy gave me an Apple Airport (the one that looks like a apple power adapter). I plugged it in where I had the high power unit in place and suddenly I had amazing WiFi speed and coverage EVERYWHERE. I could not believe it! That day I ordered an Airport Extreme and it has been fantastic.
I then recommended this solution to a friend of mine that had an Apple MacBook and he had nothing but trouble and went back to his linksys. So it is a mixed bag.
Currently I have three WiFi devices: A TimeCapsule downstairs, an Airport Extreme upstairs and a LInkSys in a utility closet. The LinkSys is needed because my son's GF's Windows computer will not connect to anything else.
Anyway glad you figured something out.

Downloaded Trial - An issues and some questions

I just downloaded the trial and have some issues and questions I hope someone here can help with.
My problem:
I am unable to use the Media encoder to create any output files. I get the error, "The source and output color space are not compatible or a conversion does not exist". This happens when I attempt compositing video clips. If I use a single video clip I don't have this issue.
Using the Export - Movie menu option works (for the same composite), but the amount of time it takes (a hour and 20 minutes for a 4 minute movie) too much and I can't see myselfe going too far or dooing too much work in this fashion. I believe my hardware specs are well above the required specs. If this normal?
Questions:
1. I can't import mpeg video. Is this by design? If so why?
3. I can't export to wmv? Is this by design, if so why?
What is the true minimum hardware spec. for someone intending to edit/create HDV? In other words, what is someone out there using that works. I'm really not looking to have to spend a ton of money on a new machine :).

John,
Thank you for the info. So I take it I can use mpeg as my source in the purchased product?
Do you know why I am not able to use the media encoder options to generate any output? What does the error message mean?
Jeron,
I'm not sure what your reply is in response to. (since I didn't ask about HDV) :)
I would like to hear from anyone about the hardware they're using for HDV work.
Are the minimum specs for HDV cited on the documentation really a viable editing experience?

So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Minor ThinkPad issues and some questions

What I'm using
IBM ThinkPad R40
Pentium-M 1.4Ghz (Banias)
Mobility Radeon 7500 with 32MB RAM
512MB RAM
Hitachi DVD-ROM/CD-burner combo
PCMICA Gigabit Ethernet card using Realtek r8139 chip (as the onboard one is broke)
Hitachi 40GB 4200rpm HDD
I don't use wireless.
How's Arch installed? (details)
I've used the "base" install CD of the recently released 2007.05 "Duke". I basically took all the default suggestions in regards to partitions (as I'm testing an install process that works best on this ThinkPad).
For the power saving bits:
I installed acpid, powernowd, and powersave.
As well, from the "unsupported" AUR: kpowersave (0.7.x one) and kima.
For the kernel, its the default one but recompiled with resume as one of the HOOKS. Other than that, no other changes were made.
In /etc/rc.conf,
for the MODULES section, I've added: speedstep_centrino and ibm_acpi
for the DAEMONS section, I've added: acpid, powernowd, and powersaved
In /etc/rc.local,
I added: echo enable,0xffff >/proc/acpi/ibm/hotkey
In /etc/modprobe.conf,
I added: options ibm_acpi experimental=1
For some reason the swap partition was never activated, so this is necessary: mkswap /dev/sda2
(Is that a bug in the 2007.05 release?)
For Suspend-to-Disk to work, I had to add the following in /boot/grub/menu.lst
On the line that starts with kernel, I added: resume=/dev/sda2
I got everything I needed to work.
(Everything that mattered to me)
This includes the ThinkPad Fn+keys (F3, F4, and F12), and the two grey keys for Forward and Back in KDE and Firefox. (ThinkPad owners will know these F19 and F20 key through xmodmap). Suspend-to-RAM and Suspend-to-Disk works. Dynamic CPU throttling works. Manually setting the CPU speed works as well (via kpowersave). Through kima KDE applet, I can view CPU speed, uptime and temp on the taskbar.
What's the problem? (and questions)
But not everything is perfect...
(1) When I do Suspend-to-Disk OR when I shutdown the system, the hard disk does NOT shutdown properly (like it was in Windows or my old install of Arch Linux). Instead of a normal cricket sound of the HDD head parking, I get the same sound as if I pushed the power button (no battery installed) while its on. A high-pitched shutdown.
This results in Arch booting up occasionally with a message about HDD not properly shutting down and needing to force a check. This is obviously bad from a data integrity and HDD perspective.
Has anyone else experienced this? How did you resolve this issue?
(2) Once I finished testing Suspend-to-RAM, I check dmesg. I get some lines referring to a problem with the USB ports:
hub 1-0:1.0: over-current change on Port 3
(happens on Port 1 and 4 as well).
Anybody have an idea what its complaining about? Should I ignore it?
(I don't have any USB devices plugged in)
Other questions?
(3) I previous installed Arch Linux 0.72 with hibernate-script and the kernel26beyond kernel without the two issues as noted previously. Since the "Beyond" kernel is no longer being maintained, Is it OK to use the recently released default kernel with hibernate-script? Will it work?
(4) If I use the hibernate-script approach to Suspend-to-RAM and Suspend-to-Disk, what applet or app does on use in KDE to allow you to set the desired speed or power scheme? (I like how kpowersave does things, but that reads off powersave)
As you can see, I almost have my Thinkpad working the way I want it with Arch Linux. There's just a few niggles that need to be resolved. I hope you can help. Thanks in advance.

Well, I tried both approaches: Kernel with Suspend2 and the regular Kernel (2.6.21.3-1)
Both suffer the same HDD issue, but under slightly different scenarios.
They both will get the problem when you suspend to disk (call it STD from now on). But if you enable "RediSafe-like" function on the Suspend2 side, the HDD problem doesn't occur. It shuts down perfectly. However, when I resume back from STD, I lose all IBM button functionality. When I go to shutdown, the HDD problem appears.
With the regular Kernel, the HDD shutdown issue happens regardless if I STD or shutdown the system.
Either way, I'll disable STD use for now. At least until Arch's regular kernel and Suspend2 one moves to 2.6.22 Kernel. So it IS a Kernel related issue.
Here's how I did the Fn keys for my ThinkPad R40 (Pentium-M 1.4Ghz with Mobility Radeon 7500)
In /etc/acpi/events, I created the following files with their respective contents using Suspend2 for STD.
Please note: I don't have wireless on this notebook, that's why you won't see a Fn-F5 one.
Fn-F3 (Turn off and on display backlight. or Blank screen)
event=ibm/hotkey HKEY 00000080 00001003
action=/etc/acpi/events/backlight.sh
backlight.sh (You will need radeontool from the AUR. Be sure to make this executable. ie: chmod +x backlight.sh)
#!/bin/bash
if [ -e /tmp/backlightoff ]
then
radeontool light on
rm /tmp/backlightoff
else
radeontool light off
touch /tmp/backlightoff
fi
Press Fn-F3 to blank screen. Press Fn-F3 again to get out of it.
Fn-F4 (Suspend to RAM)
event=ibm/hotkey HKEY 00000080 00001004
action=echo -n mem >/sys/power/state
Fn-F7 (Switches between VGA and your notebook's display. I haven't tested this, but its what I got form the ibm_acpi README!)
event=ibm/hotkey HKEY 00000080 00001007
action=echo video_switch > /proc/acpi/ibm/video
Fn-F12 (Need sudo and add your user into the wheel as well as an entry into /etc/sudoers.)
event=ibm/hotkey HKEY 00000080 0000100c
action=sudo hibernate
lid (Causes same function as Fn-F4. That is, Suspend to RAM)
event=button/lid
action=echo -n mem >/sys/power/state
As mention the problem with the above, is once I resume from STD with Suspend2 Kernel, I lose their functionality.
Maybe I should be changing handler.sh in /etc/acpi instead of adding stuff to events?

HT201272 My hard drive had some issues and all of my music videos are gone. The itunes store is charging to download them. How do I get them re-downloaded?

My hard drive had some issues and all of my music videos are gone. The itunes store is charging to download them. How do I get them re-downloaded?

From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also see this migrate iTunes library post by turingtest2

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

Hi ohmghimire,
Thanks for visiting Apple Support Communities.
If you're seeing unexpected behavior when using USB devices, try resetting the SMC on your MacBook Pro:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the article with these steps here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you still see this behavior after resetting the SMC, or your computer won't turn on, try the steps in this article next:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Best Regards,
Jeremy

Dreamweaver, DropBox and FTP Issues

In the past couple of days, I've run into a new issue with DreamWeaver and the only logical explanation I can come up with is the following.
I have DreamWeaver set to put the file on save. So it goes right out to my server. 99% of the time, I'll run into a "Access denied. The file may not exist locally, may be open in another program, or there could be a local permission problem." error.
Nothing has changed on my server that should affect this problem. I started using DropBox perhaps 2 years ago, and have kept all of my files in DropBox for easy access and security (auto backups). Never had a problem until this week.
I'm seeing this error in Dreamweaver CS6 and Dreamweaver CC on multiple machines. The only thing I can think of is the following.
Dreamweaver Saves the file.
Dreamweaver lets go of the file for a second.
DropBox grabs the file and starts uploading it to their servers.
DropBox actually locks the file during this process (guessing here).
Dreamweaver tries to grab the file, and since it's locked by DropBox, it can't take control of it locally.
Dreamweaver kicks back the error above.
If I immediately select the file, right click and say "put" it works without issue. Every time. It simply won't put on save. I presume I could test this by moving the files out of DropBox and seeing if it stops. Was curious if anyone has seen this issue, and if there might be a way to delay the "put on save" by 1-2 seconds, giving DropBox enough time to grab, put and let go of the file I'm working on.

Hi WesLinda,
Have you enabled the option "Automatically upload to server on Save" in server settings Advanced tab. If not try that. You will not have to upload the files manually.
If you still get the issue. Do a test and then see what happens.
1) Stop the Dropbox services for a while by ending the related processes from the Task Manager or disable the services from Startup item and reboot the computer.
2) Work on files in DW and then check how much time it takes.
3) Restore the DropBox services back.
Thanks
Bhawna

New Macbook Air i5 wireless is very slow and disconnect again and again. Any one has the same issue or some help??

I recently bought a new 13 inch Macbook air and wireless internet is really slow and disconnect again and again. However I hav another windows laptop at the same place and that never disconects or looses signals? wireless on this mac is too slow that I cannot even use to make a skype call. I am new mac user and getting a bit disappointed because of this bad performance.I googled about this issue and found that lot of people are having the same issue with macbook air. I switched off the bluetooth adaptor but still no progress. Any help will be appreciated. Thanks

I am experiencing something similar with my MBA 13"/i5/256GB.
To take it one step further, I started up a Terminal session and ran a ping against my wireless router. I see the same pattern repeated over and over: I get about 5 or 6 pings through, then 4 or 5 misses, then it reconnects again. When it reconnects, the first ping or two have times in thousands of milliseconds, where normal is maybe sub-millisecond to 4ms for the remaining few seconds.
I have other wireless devices, including iPhone, iPad, and an older MacBook - all work fine. The MBA is the only Lion device.

Ftp issue (and some netstorage and iFolder as well)

Similar Messages

Maybe you are looking for