FTP issues -even on WS_FTP. Please Help
I had a connection that was working fine and then it became
disabled, through no action on our part. I deleted the connection
and have been trying to create a new one since then without any
success. I was so sure that the problem was with Contribute, that I
didn't even bother to try another FTP program. Contribute was
making the connection, but the folders in the directory were not
showing on the second part of the wizard where you choose the
location of the website. I know the FTP information is correct,
because it is working on another computer. So finally tonight I
decided to try WS_FTP to make sure it worked and I couldn't believe
it when the same thing happened. I connect fine, but the folders do
not show up. I even created a new folder which didn't show up on
the problem computer, but shows up on my other computer. Surely
this is a simple problem with a simple solution. I would be
grateful for any help I could get, before I pull all my hair out.
Thanks.
Hi,
Can you see if the user has read write permissions for the
folder you are trying to access.
Also see if the FTP root folder is pointing to your
wwwroot/site root folder.
Similar Messages
-
Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
My daughter forgot her passcode for her 3GS, and iTunes will not let me change the passcode or even update. Please help!!!
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
The "From" column in my Yahoo! e-mail account is blank. I trouble-shot it with them to no avail and they determined it was probably an issue with Firefox. Please help it has been like this since Monday! Furthermore, it appears fine when I view my Yahoo! e-mail while using the Google Chrome web browser.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
Firefox constantly freezing due to issues with Flash. Please help.
I was running the firefox 20 beta (and have been for a while) when in the last few days, suddenly any time I tried to open any site that used even the slightest amount of flash, the browser would freeze for minutes on end before finally releasing a "plugin error" type message about Shockwave Flash. If i clicked 'continue' it would stay frozen. If i clicked 'stop script' then sometimes it would fix it, but most of the time it would keep freezing and showing that same message over and over until I stopped the process in task manager.
First I tried to update flash and shockwave- both are up to date. So i decided to delete the files themselves and the programs via add/remove and reinstalled them. Still did not fix the problem.
Next I tried to do a reset firefox to default state. This didn't work. I tried doing it again with the flash files deleted/uninstalled AND I rebooted the computer and the problem still persisted.
Finally, I tried to downgrade to a more stable version of firefox, so I downloaded 19 and it still didnt work. Tried the uninstall/re install for flash one more time and nothing.
At this point, I cannot access about half of the pages I usually go to on the web and I need help here, please anything will do.
One thing that I noticed that might be helpful is that no matter how many times i uninstalled or reinstalled flash, every time it would try to run, task manager would show two instances of it, each using different amount of memory.
again, please please help. If there is any solution short of a total wipe it would be greatly appreciatedhello, maybe it's an issue with the protected mode in the flash plugin - you could try if [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) or [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] makes a difference.
-
Major Issues with iPod Touch - Please help!
Hi, I am having major issues with my iPod, and nothing seems to be going right. It all started a few days after I got it for Christmas. I would wake up, and my iPod would be completely discharged even though it had a full battery and was turned off. I woke up one night and found that it came on all by myself. I sent it into iPod, and they sent it back saying nothing was wrong. Since I got it back today and within six hours, I have had four software crashes to the point where I have had to uninstall iTunes and restore factory settings four times. I am now on my fifth crash, but this time, the screen won't even come on. It keeps saying that it is in recovery mode. I simply went to turn it on! Does anyone have any suggestions? Personally, I think there is a short, and that I need a new a replacement. However, it doesn't seem like Apple is very supportive of the idea. I go through all of their steps over and over and over, and the same thing happens! What is going on? Please help.
Mariesounds like, for the charging problem anyways, that you are just putting ipod into "Stand by" mode... press and hold the power key for about 10 seconds and an option to power off will actually come on.. if u just press it and let go, it just goes to stand by.. i have noticed stand by drains my battery
also, it doesn't sound like a short to me... the charging i am pretty sure is bc you are only putting it into standby however, the rest sounds like software.. did u try and restore using itunes or did you just reset the factory defaults?? Plug it into itunes and click restore under the ipod menu...
Message was edited by: Devin Stephens
Message was edited by: Devin Stephens -
I have a ipod touch 4th gen and it wont chrage. When you plug it into the wall the lightniing bolt screen will apear but no matter how long you leave it, it will never turn on. Also it the lightning bolt screen wont even come on when you plug it into a computer (PC)..........PLease help its been like this for forever
Hi Gammer576775!
Here is an article that will help you troubleshoot this issue with your iPod touch:
iPod touch: Hardware troubleshooting
http://support.apple.com/kb/ts2771
Will not power on, or will not turn on unless connected to power
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Connect the iPod touch to an Apple USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if the display turns on and…
The home screen appears, the device should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen: . Then disconnect the device from power. If it immediately turns off, seek service.
The low-battery image appears even after the iPod touch has charged for at least 20 minutes: See the "iPod touch displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or low-battery image appears , continue with this article for further troubleshooting steps.
If the iPod touch did not turn on, reset it while connected to an Apple USB power adapter. If the display turns on, go to step 4.If the display remains black, go to the next step.
Restore the device. Connect it to a computer and open iTunes. If iTunes recognizes it and indicates that it is in recovery mode, attempt to restore the iPod touch. If the device doesn't appear in iTunes or if you have difficulties in restoring it, see this article for further assistance.
If restoring the iPod touch resolved the issue, go to step 4. If restoring it did not solve the issue, seek service.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Several issues with iPod touch. please help!
Ok. So i have several issues going on with my iPod touch. i got it for Christmas in 2010, i have recently updated it. after the update these issues have happened.
1. Screen won't rotate. Photos won't rotate. The screen won't rotate for horizontal keyboard use. Even for some apps that you have to rotate the screen, it just wont rotate. i have tried everything! i have read other discussions about this issue and they said there is a lock with an arrow around it in the top right corner, in my ipod there is not.
2. After i updated my iPod i noticed about 20 of my songs went missing! they are no where to be found on my iPod AND my iTunes! I purchased all of those 20 songs and am kind of mad they randomly disappeared. i have looked in every place a song could be and they are not there.
3. I have recently downloaded some apps and wheni went to try them, they would almost load and then crash and go back to the home screen. a bunch of my apps do that now. i have tried restarting my iPod and i have tried to open the apps like a million times and everytime they crash and goes to the home screen of my iPod. they are all free apps. some of the apps are: Impossible Test: summer, angry birds, angry birds: rio, angry birds: seasons. some of them i have been able to play a couple times, then they randomly stared crashing.
someone please help me with these problems! thank you!For #1:
- Have you restored the iPod from backup?
- Have your restored the iPod to factoery defaults/new iPod?
If restoring from backup does not solve a problem then your likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
For #2:
If you are in the USA and using the latest iTunes then you can redownload music via the iCloud beta. See:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise you can contact iTunes and they MAY allow a redownload. See:
Apple - Support - iTunes
For #3:
Try:
iOS: Troubleshooting applications purchased from the App Store -
Issue With Adding Layers - Please Help!
I am having an issue where Photoshop is not allowing me to add any kind of new layer to images that I'm editing. It won't allow it while it's a .NEF or after it's become a .PSD. If I open an image that already contains layers and is saved as a .PSD, then it allows me to add layers no problem. If I start a new blank document it will allow me to add layers. It's just not allowing me to do it with files that have been imported within the last week. It doesn't seem like a system resource issue since it allows me to add layers to older files. If you have any thoughts on this please help!
I am running:
Adobe Photoshop Elements Language Version: 8.0.0 (8.0 (20090905.r.605812))
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:6, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 2
Processor speed: 2100 MHz
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD M880G with ATI Mobility Radeon HD 4200
OpenGL Drawing: Disabled.
Video Card: AMD M880G with ATI Mobility Radeon HD 4200
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Driver: atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version: 8.632.0.0
Built-in memory: 3838 MB
Free memory: 1801 MB
Memory available to Photoshop: 1619 MB
Memory used by Photoshop: 60 %
Image cache levels: 4
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 453.9G, 64.8G free
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 8.0\Plug-Ins\
Additional Plug-ins folder: not set
-TonyWell... sort of fixed it. Apparently my system doesn't like editing images with a color depth of 16bit. If I convert it down to 8 when I'm converting it from RAW, then it allows me to add layers... Is this normal?
Thank you for your time,
-Tony -
Issue about jsp taglib,please help
Hello all,
I want to use jsp tag like following:
<c:import url="xxx.jsp">
<c:param name="xxxAction" value="<portlet:renderURL/>"/>
</c:import>
and the value of the c:param can not accept the value generated by the <portlet:renderURL/> tag.
I can resolve the issue by writing java code in the jsp(like ...java code...<c:param name="xxxAction" value="%=...%"/> ),much java code occur in the jsp,I do not like this solution.
anybody has good solution please help me.
thanks and rgds.Ram is correct. You can't nest custom tags as attributes to other custom tags.
In this case the <c:param> tag offers the option of specifying the value as the body of the tag though, so the following should work:
<c:import url="xxx.jsp">
<c:param name="xxxAction"><portlet:renderURL/></c:param>
</c:import> -
PC & MAC's on a network, disconnect issues, AT WITS END, PLEASE HELP!!!!!!
HI everyone...
This problem has me broken and utterly confused. I'm somewhat of a newbie to MAC, so I still have a PC my girlfriend uses that is wired to the router. She also has a gateway laptop w/ wireless card. I've seen the promised land and am the proud owner of a MacBook. The router is a Linksys WRTG54GS router, if that would help. The reason I bought the router is that it is noted as "very good."
I'm under suspician that it may have to do w/ Mac system updates...any ideas????
The only problem is when, the home network (with security or without) has the MAC on the network, the network breaks down after around 15-20 minutes. It works fine for that period of time, then in the wireless indicator on top, it always goes down to 4 bars, but the network is not accessible at all.
When it is only PC on the network, it stays up without any issues. I WANT TO USE MY MAC WITHOUT RESETTING MY ROUTER EVERY 20 MINUTES....PLEASE HELP!!!!!!!!!!!!!!!!!!!!
ps- I've updated the firmware and everything, to no avail, it doesn't work.I had a similarly frustrating experience when setting up my Linksys WRT54GS wireless router. My new MacBook Pro would not connect to the Internet as it would not take an ip address from DHCP on the Linksys router.
The problem was that the latest firmware from Linksys for this router (1.50.9) is at fault. It is not compatible with Mac OS 10.4.8. In order to get things to work normally I had to downgrade the firmware of the router to version 1.50.8
You may have to hunt around the various Linksys forums sites to find version 1.50.8 as Linksys Canada would not provide it to me. I was told to use manually set ip addresses until a new firmware version was released. However, version 1.50.8 seems to be stable and working well for me.
There are similar problems with the compatibility of the firmware on the WRT54G Linksys router with OS 10.4.8 too, which also requires downgrading the firmware. Check the Linksys forums for more details as the firmware versions are different for this router.
Good luck!
Quicksilver G4, MacBook Pro C2D Mac OS X (10.4.8)
Quicksilver G4 Mac OS X (10.4.1)
Quicksilver G4 Mac OS X (10.4.1) -
After update my iPhone 4 iOS to 5.0.1 the. Bettery gone so bad. Every 1% goes every minute while browsing. Also system is very slow and 3G. Connectivity gone very poor. I want to go back to ios 4.3.4 until these problem are resolved. Please help.
Just look around the forum posts. Your issue is the number one problem reported by users. There are many suggestions found, some work for some users, others do not.
Some users have reported no battery problems after the upgrade. Others have improved performance after upgrading to 5.0.1 from 5.0. YMMV.
Many of the posts offer suggestions about changing various settings - there are many that affect the battery life.
Once you upgrade the iOS on a device, you cannot go back to a previous version. -
Having many issues... Please help!
Issue number one. I was recently surfing the web, trying to find an off shore escrow company. When I clicked on a link and my computer started downloading "something". I immediately tried to stop the download, but now I'm getting spammed with a banner across the top of my Safari windows. It doesn't matter what site I go to, I keep getting the banner that states, "congratulations you've won, blah..." with audio! So annoying, because the computer voice keeps repeating it. "congratulations, congratulations". You get the idea.
Issue number two. Whenever I try to get into my system preferences, my pin wheel spins forever! As well as, when I'm using Safari. My computer entirely has been sluggish lately.
Issue number three. After the crazy download, I tried repairing my disk, but I keep getting this error. Now I know, there's been other threads on this issue, but I don't understand "their computer language". Here's the message I keep getting:
Error: The underlying task reported failure on ext
1 HFS volume checked
Volume needs repair
Now I have the two disks that came with my computer, but I don't understand what I'm suppose to do with them? Other threads tell me to reboot using the start up disk. What does that mean, exactly? Please explain, step by step what I'm suppose to do.
I'd also like to scan my entire computer (due to the mysterious download) for virus', etc. However, the apple threads only talk about virus via email, which doesn't apply to me. Please help me fix my t issues. Thanks for taking the time to read my frustrations. Your fellow mac user.If you are getting an error that cannot be repair when running Disk Utility's Repair (not Verify), you can either get a tool like Disk Warrior from Alsoft to fix it -OR- you can back up your data, reformat the drive, and restore your data.
You can backup your data using a cloning program (such as Carbon Copy Cloner) to duplicate the entire drive to an external drive. If you do this, you can reformat and run the cloning process in the other direction to restore. Or you can just back up your user data, then after reformatting, reinstall the OS and apps "fresh" before restoring your data.
Disk Warrior - http://www.alsoft.com/
Carbon Copy Cloner - http://www.bombich.com/software/ccc.html -
[solved]Waiting for UDEV .... and other issues. ARCH magi please help!
see what i did there? with "ARCH" mage? haha
Anyways........
Attempting an install and cant get passe the waiting for udev events to be processed phase.
-ASRock 890FX DELUXE3 AM3 AMD 890FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard
-AMD Phenom II X4 965 Black Edition Deneb 3.4GHz Socket AM3 125W Quad-Core Processor
- G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory
- COOLER MASTER Silent Pro Gold Series RS800-80GAD3-US 800W ATX 12V v2.3 / EPS 12V v2.92 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply
-Sony Optiarc Black IDE DVD-ROM Drive
- (x2) 250 gb hdd
Peripherals (tried with these unplugged as well)
- Saitek CCB437050002/04/1 Black USB Wired Laser Cyborg R.A.T. 5 Gaming Mouse
- Microsoft SideWinder X6 Black Keyboard Win USB
- Creative Fatal1ty Gaming Headset
I tried downloading other versions (releases whatever) and still no dice. It always hangs on waiting for Udev events.
The Net install gets further and asks for a password and user name ( trying the default root password isn't working, after multiple attempts returns me to login prompt).
I have various issues with other distributions as well here are some of the others I have tried so far:
Gentoo: hangs at Syslinux 3.86 2010-04-01 ebios line
Ubuntu: hangs after selecting boot/ install ubuntu
Arch linux: see above
Chakra: does not recognize anything no boot screen or anything just hangs at blinking cursor or boots into windows
PeppermintOS: hangs at SYS LINUX screen as well.
Please help me Arch linux wan kanobi you are my only hope!
Im lost... and am new to Arch linux though I have done allot of research on it and cant find an answer. I have been using linux for a while in the past, and have installed multiple distributions before without issue. The udev error is from a cd boot....
Last edited by 3picgillftw (2012-05-15 08:04:44)I'm having this same problem, but the machine locks up for no less than 10 hours (I let it set all night). At the startup screen, it still shows "Starting udevd..." and remains there. I tried looking at the logs, but nothing gives any sort of indication of what is causing it to hang up forever. I don't have a Realtek (dmesg shows Intel(R) PRO/1000 Network Driver - 1.5.1-k). As I'm still struggling with Linux at such a low level, it would probably be best to wait for the fix.
BTW, Thank you to the developers, tech support, helpers, etc. etc. for Arch Linux and all their hard work/support, without which I would be totally lost and wandering aimlessly through a barren desert with a canteen full of sand and no direction in which to go and have no real meaning or purpose in life (a.k.a. using Windows).
In case this is helpful to anyone else:
ASUS Crosshair V Formula
AMD 6100 FX cpu
USB N13 Wireless-N adapter
ASUS GTX550 Ti
Corsair Vengance 16GB
Last edited by 12o (2012-01-24 21:48:57) -
Major External Hard Drive Issues... Please Help!
Hey Everyone,
I own an Iomega Silver High Speed USB 2.0 Hard Drive 250 GB... I used to use it to store files for my old XP machine... and would now like to use it for my Macbook running 10.5.2 since my PC died.
The problem I have:
The drive does not mount on the desktop and when I go into Disk Utilities, it shows the drive as having 744.9 GB of space rather than 232.9 GB as it actually has.
Furthermore, I cannot "Erase" or "Partition" the drive because I get the error "Resource Busy". However, when I plug the drive into a Macbook running Tiger and try to partition the drive, the blue progress bar at the bottom jumps to 1/4 done and then does not move at all.
I have plugged the drive into a Windows XP machine and it cannot partition the drive properly either..
Please help! You guys are my last hope since I called Iomega... who say it is clearly NOT a hardware issue and referred e to Apple Tech support who did not resolve the issue and had me on hold for 40 minutes...
I beseech you, please help fix my hard drive... I don't need the data on it, I just need a hard drive that works as soon as possible...Hi! "However, when I plug the drive into a Macbook running Tiger and try to partition the drive, the blue progress bar at the bottom jumps to 1/4 done and then does not move at all." If the disk is damaged (which is is) then the format would likely take 12-24 hours to complete so if you interrupted it it could have damaged the disk. I have a new disk that I never could get partitioned and is damaged beyond repair. Ok try this restart the computer with the disk off. Then turn the disk on and see if it brings up the message that the disk is unreadable and takes you to the disk utility. Also sometimes changing usb ports or trying to format it on another computer works. Tom
Maybe you are looking for
-
How to compile connection pool sample java code
I recently bought David Knox's "Effective Oracle Database 10g Security by Design", and have been working through his examples with client identifiers and how to leverage database security with anonymous connection pools. The database side of things I
-
APP that will copy to multiple destinations at the same time?
Is there an APP that will copy folders to multiple destinations at the same time? I'm copying like 16GBs at a time.. And would like to write to 2 separate destinations at once. SPEED is very important. A verify function would be very nice... Tx.. Joe
-
How do I transfer an album from photoshop elements 12 to my ipad?
How do I transfer an album from photoshop elements 12 to my ipad?
-
I was using raw & my hard disk nearly full. When I downloaded pix, I got message that said hard disk nearly full. My pix downloaded into 2 folders. When I merged them about 50 disappeared. Where can I find them? Using MacBookPro, IPhoto 9.5.1
-
Hi, I have installed complete ODI 10.1.3.6 on a server "A". I am now trying to install just the ODI agent on server "B" and use the server "A" repositories. This is for using Hyperion ERPi which requires at least ODI agent to be installed on the mach