FTP logon issues on IIS 7 using Windows Server 2008 R2

Hi, I'm currently experiencing issues when trying to log on to an FTP server I created using Windows Server 2008 R2.
The FTP web site has Enabled both Anonymous and Basic Authentication.
On the Authotization Rules it has enabled Allow All Users and Anonymous Users with read permissions, and the local administrator with read and write.
Whenever I try to log on, either via IE or Command prompt, when asked for credentials, I get logon failures, either with anonymous or a username that has access permissions to the FTP root folder.
I tried changing the FTP application pool identity to Network Service, but still get the same error. I also have tried testing the connection from the basic settings section of the FTP Site, and when I test it using Application User (use pass-through authentication)
I get an error that says: ¨IIS Manager cannot verify whether the builtin account has access¨If I instead use a username and password, the test passes ok, however using this account to try to enter the FTP site I get logon failure, even when the account
I´m using is a local admin account.
The Server is part of an AD Domain.
I have read a few blogs and forums about problems with FTP validation but nothing related exactly to my issue.
Any ideas are deeply appreciated.
thanks
Eduardo Rojas

Hi, I would tend to ask on IIS forum (iis.net), as you might get more attention and help there.
For your issue, I would tend to think that you need to set the correct security on the FTP's home folder, but again it's only an advice, as I'am not an IIS's guru.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Similar Messages

  • Database logon failed when deploy CR on Windows Server 2008

    I use Crystal Reports for Visual Studio 2010 Production Release with MVC 2 web aplication and SQL Server 2008 database server. When I compile/run from VS 2010 it running well, but when deploy it on Windows Server 2008, when load certain report (Not All report) face the following exception message:
    Database logon failed
    Stack Trace is as the following:
    at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType) at SequisLife.Controllers.ReportController.run_report(String report_name, IDictionary`2 dic_param)
    InnerException:
    System.Runtime.InteropServices.COMException (0x8004100F): Database logon failed. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
    run_report method is as the following:
    private ActionResult run_report(string report_name, IDictionary<string, string> dic_param)
                string ls_respon = "";
                try
                    get_sqllogin();
                    ReportClass rptH = new ReportClass();               
                    rptH.FileName = Server.MapPath(VirtualPathUtility.ToAbsolute(report_name));
                    rptH.Load();             
                    rptH.Refresh();
                    Database crDataBase;
                    Tables crTables;
                    TableLogOnInfo crTableLogOnInfo;
                    ConnectionInfo reportConnectionInfo = new ConnectionInfo();
                    reportConnectionInfo.ServerName = server;
                    reportConnectionInfo.DatabaseName = database;
                    reportConnectionInfo.UserID = login_user;
                    reportConnectionInfo.Password = login_pass;
                    crDataBase = rptH.Database;
                    crTables = crDataBase.Tables;
                    foreach (Table crTable in crTables)
                        crTableLogOnInfo = crTable.LogOnInfo;
                        crTableLogOnInfo.ConnectionInfo = reportConnectionInfo;
                        crTable.ApplyLogOnInfo(crTableLogOnInfo);                  
                    ParameterFields lpf_parameters = rptH.ParameterFields;
                    if (lpf_parameters.Count > 0)
                        foreach (ParameterField lpf_param in lpf_parameters)
                            var llst_tmps = dic_param.Where(d => d.Key == lpf_param.Name);
                            foreach (var param in llst_tmps)
                                if (param.Key == lpf_param.Name)
                                    if (lpf_param.ReportName == "")
                                        rptH.SetParameterValue(lpf_param.Name, param.Value);
                                    else
                                        rptH.SetParameterValue(lpf_param.Name, param.Value, lpf_param.ReportName);
                    Stream stream = rptH.ExportToStream(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat);
                    return File(stream, "application/pdf");
                catch (Exception ex)
                    ls_respon += ex.Message;
                    ls_respon = " - "ex.StackTrace;
                    ls_respon += " - " + ex.InnerException;
                    ls_respon += " - " + ex.Source;
                    ls_respon += " - " + ex.Data;
                    return Content(ls_respon);
    Please any body hepl me...
    Thank's in advance

    Hi,
    I am using CR with visual studio 2010 in windows 7 box 64bit box. using a ADO.net data source. And I need to export .rpt as pdf.The solution works fine in my dev box. by when i try to deploy in a windows server 2008 R2 box (64bit) it fails . Both my dev box and deplyment box uses sql server 2008 DB . Also i am using .Net framework 4.0 (not client profile)
    installed the following things in deployment box:
    1. CRRuntime_64bit_13_0_1.msi in
    2. Also copied the CRforVS_mergemodules_13_0_1 in C:\Program Files (x86)\Common Files\Merge Modules
    I get the following error in my Box:
    CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)   at Tesco.Instore.PickingControl.ReportController.PrintDriverDocumentation(String driverDocumentation, Int32 vehicleTripId)] 20/10/2011 08:08:41        PCS        Critical                   Classic .NET AppPool      Error running End of Van [Logon failed.
    Error in File temp_31b3196f-fd25-45c8-b657-5d9cd7c9dccb {4F74290C-D56E-4FC4-8DEF-371BB5C5B10B}.rpt:
    Unable to connect: incorrect log on parameters.]
    I also verified the database connection is upto date. while creating the solution
    the project build is set to anyCPU.
    is there anything else i have to install ?? Please help me ..I am trying this thing from last one week and have not got any proper solution till now

  • Issues on Installing Oracle on Windows Server 2008 Guested on VMware Workstation 10

    I am trying to install Oracle 11g R2 on Windows Server 2008 Guested on VMware Workstation 10 but I am getting this Warning on Enterprise Manager Configuration  at the end of installation.
    Besides, when I tried to connect to hr database through Oracle SQL Developer I am getting following error:
    Can you please let me know what I have done wrong? and how can I fix This? Thanks

    Farzanx1 wrote:
    I need to install and configure Active Directory and DNS service on a
    remote Windows Server 2008 R2 which has a public facing IP, gateway
    and DNS. I don't really understand such network structure:
    IP Address: xx.xx.93.158
    Subnet Mask: 255.255.255.252
    Default Gateway: xx.xx.93.157
    DNS: xx.xx.64.10
    I have experience on installing AD and DC, DNS services on local
    servers (which then the server becomes the DC for the local network)
    but I hesitate to do this on a publicly facing production server.
    Unfortunately I wasn't able to find a proper guide for my case.
    Would appreciate if someone could guide me on the steps I need to
    take so that I will not disturb the current network settings. (A
    little down time for installing the services and features is ok as
    long as I don't lose connectivity)
    Thanks
    You want to install AD on an Internet Server?
    According to your description your server has one public IP-address and
    no internal IP-address and you want to install AD on this Internet
    server?? Is that correct??
    Can you tell us the intended use of this server. Do you want to host
    services on this server, which need AD authentication?
    If you have a second NIC and your DC is on another local machine I
    would not expose your local AD on an public accessible server. If this
    server shall become a DC it should not have more than one IP-address.
    If you want to access data on this server via Internet securely I would
    recommend a VPN solution - preferably not running on the server itself
    but on a separate firewall between the server and the internet. In this
    case I would have no see a big security problem running AD on this
    server.
    Wolfgang

  • Using Windows Server 2008 with After Effects as Render Slave?

    Hi guys,
         We have a fair number of servers that run Windows Server 2008 64bit.  We wanted to further utilize these boxes and wanted to know if it's possible to use them as render slaves with After Effects?  Anybody doing this?  We couldn't find anything for system requirements on Windows Server 2008.
    Thanks for everyone's input.
    Jason

    Hi Todd,
         Another question for ya.  Does it matter if we have some machines still running 32-bit render slaves for after effects and implement a master 64-bit CS5 after effects Master?  Can you mix it up OR do all the machines have to be upgraded to the same version, eeven though they are just render slaves?  We are just doing some thinking on reconfiguration and what to do so it's right the first time.
    Thanks for the input.
    Jason

  • Index a NAS shared folder using windows server 2008?

    I have NAS server stores all my files, and I have windows server 2008 which is running an app (File Finder), So I am trying to index NAS shared folder.
    How can I index nas shared folder using WS2008? or is there anyway to index NAS shared folder ?

    Hello,
    please do not multi post the same question Already given an answer in
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/91ca966c-aacc-4db1-8e3f-3cc8f03f7425/how-can-i-index-mapped-network-drive-on-windows-server-20082012?forum=winservergen#86db6f15-fdc6-4dc1-ab51-19c58ad054c8
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • Issue with disabling teredo with Windows Server 2008(non R2)

     Hello,
    I am not able to disable teredo on Windows Server 2008 (non R2) .When I try to run the same set of commands on Windows Server 2008 R2 it works fine.I have followed the instructions as in the below link
    http://technet.microsoft.com/en-us/library/cc770710(v=ws.10).aspx
    C:\Windows\system32>netsh interface teredo show state
    Teredo Parameters
    Type                    : client
    Server Name             : teredo.ipv6.microsoft.com.
    Client Refresh Interval : 30 seconds
    Client Port             : unspecified
    State                   : offline
    Error                   : client is in a managed network
    C:\Windows\system32>netsh interface teredo set state disabled
    Ok.
    C:\Windows\system32>netsh interface teredo show state
    Teredo Parameters
    Type                    : client
    Server Name             : teredo.ipv6.microsoft.com.
    Client Refresh Interval : 30 seconds
    Client Port             : unspecified
    I have also tried changing the below registry to disable teredo , that didnot work as well.
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\DisabledComponents DWORD value set to 8.But the teredo status for the netsh command remains the same even after reboot.
    When I try to disable the 6to4 or isatap it works fine.I have checked in device manager ->network adapters with show hidden devices enabled, but I dont see teredo adapter even when teredo is enabled as per netsh.Also I dont see teredo adapter in add
    legacy hardware- > network adapters - > Microsoft devices , but I see isatap and 6to4 adapters in there.
    Can someone please help me..
    Thanks in Advance

    Hi,
    In device manager, add legacy hardware, install Teredo adapter, update the drivers. Reboot and check if you can modify the status.
    If this failed, reset tcp/ip stack.
    http://support.microsoft.com/kb/299357
    Hope this helps.

  • Virtual Machine( VM WARE) using Windows Server 2008 R2- how to install a software from host to guest.

    Dear All,
    Can you Please tell how to install a software SQL Server 2012 from the Host to my Guest OS Windows Server 2008R2 in my Virtual Machine? I am using VMPlayer and have already created a VM using the Windows Server 2008R2.
    I just need help in installing another software (SQLServer2012) from my laptop(guest computer) to my host VM. I also have the files downloaded into my C drive of my laptop(hostcomputer) for the SQL Server 2012. But I am lost as to where to click to install
    this software to my VM.
    I know I put into  Windows Server 2012 forum but I thin the procedure should be similar.
    Thank-you

    there are few options,
    you can copy the files from your host to virtual machine
    you can create a iso file and mount it to vm
    you can share the source files and access as a share
    Darshana Jayathilake

  • Routing Issue with 2 Nics on Windows Server 2008 R2

    Good Day
    My issue is I needed to set up port forwarding for a web server to communicate with our hotels management server to check availability.
    Initially the server has a single Nic configured in the 172.26.1.0 /24 network  , Its default gateway the Switch vlan interface 172.26.1.1
    We have many vlans for all the systems in the hotel and the server also needs to communicate with 3 other servers on different subnets which it does just fine.
    I now added an additional adsl line with a managed router which has an interface of 192.168.10.1 /24 , My servers second NIC has the IP address 192.168.10.2 with its gateway being the 192.168.10.1
    This 192.168.10.0 network is in a L2 Vlan and the rest of the network does not know it exists. It was working fine then just stopped asfter i added a static route to the server , which i did with RRas... I did this as the server could not communicate with
    just one of the servers..
    If i disable the 172.26.1.0 NIC the port forwarding works but then obviously the rest of the network goes down.. I know its a routing issue but am lost
    please help

    Hello,
    using multiple default gateways is not a good idea.
    See details in http://support.microsoft.com/kb/159168/en-us
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Bit Locker Implementation in Windows 8.1 machine using Windows server 2008 r2 server group policy.

    is it possible to enable the bit locker only for windows 8.1 machines through windows 2008 r2 server group policy ?
    Thanx and Regards,
    Shanif

    Hi Shanif,
    Yes, we can do this.
    Regarding how to enable Bitlocker via group policy, the following article can be referred to as reference.
    Cannot Save Recovery Information for Bitlocker in Windows 7
    http://blogs.technet.com/b/askcore/archive/2010/02/16/cannot-save-recovery-information-for-bitlocker-in-windows-7.aspx
    After configuring the settings, we can use security filtering or WMI filtering to apply the policy to specific computers.
    Regarding this point, the following blog can be referred to for more information.
    Security Filtering, WMI Filtering, and Item-level Targeting in Group Policy Preferences
    http://blogs.technet.com/b/grouppolicy/archive/2009/07/30/security-filtering-wmi-filtering-and-item-level-targeting-in-group-policy-preferences.aspx
    Best regards,
    Frank Shen

  • Urgent: Trouble reinstalling OPA on IIS 7.5 (windows server 2008 R2).

    All please see the Snapshots I have attached:
    Beehive doesn't seem to be launching the .JPG files if you want to see the error I can email it.
    ERROR 1:
    Could not load file or assembly 'childkatDotNet' or one of its dependencies. An attempt was made to load a program with an incorrect format
    ERROR 2:
    Configuration Error Server Erro in '/web-determinations' Application
    Follow the Link:
    https://stbeehive.oracle.com/workspaces/library/OPA+-OraclePolicy+Automation/Documents?parentCid=334B:3BF0:afrh:38893C00F42F38A1E0404498C8A6612B00017C659B0B&cid_strs=334B:3BF0:adoc:38893C00F42F38A1E0404498C8A6612B00017C742725-334B:3BF0:adoc:38893C00F42F38A1E0404498C8A6612B00017C633D3D
    Warm Regards,
    Marc
    702 324 7253
    Edited by: DrManhattan on Mar 17, 2010 6:59 PM

    Answered offline. The .NET runtime needs to be run in 32-bit mode to work correctly on a 64-bit operating system.
    Edited by: davinfifield on 30/03/2010 18:13

  • What GB of RAM can be used with Windows Server 2008 Standard Edition?

    I have been using Windows Server 2008 Standard Edition for my business purpose. how much maximum RAM can be installed at a time? is there any limitations? if Yes, please let me know how do i upgrade my Windows 2008 Standard Edition to any other business
    edition to avoid such limitations of RAM?

    There is always a limit. The details here: http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778%28v=vs.85%29.aspx#physical_memory_limits_windows_server_2008
    In the article you will find the limitations for other Windows OSs too.
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • Issue Installing SP2 for Windows Server 2008 SP1

    Hello, I have a very annoying issue, and I hope someone can help a bro out.
    Server: Windows Server 2008 SP1 64-bit
    Issue: SP2 wont install on Windows Server 2008 SP1
    This is what I am seeing when I check the event viewer:
    1. (Information) Windows Servicing is setting package KB948465(Service Pack) state to Staging(Staging)
    2. (Error) Windows Servicing failed to complete the process of changing update 948465-382_neutral_GDR from package KB948465(Service Pack) into Staging(Staging) state
    I have no idea why this is coming up, nor why the server cant fix the issue, but now I am forced to deal with it. So if anyone has any helpful tips it would be greatly appreciated. 
    What I have done so far:
    I have downloaded the standalone SP2 file from microsoft, and tried to install, still failed. Just sent me to the prereq page, which is pretty useless considering the fact I already have SP1 installed, and nothing new has changed physically or digitally
    in the system.
    Also, although not a huge issue, I also have a security update that is failing, basically with the same issue as the SP. Below is its Error event log.
    (Error) Windows Servicing failed to complete the process of changing update 974318-11_neutral_LDR from package KB974318(Security Update) into Staging(Staging) state
    Im hoping that upon discovering the SP issue, I can resolve the security update issue, as the errors have the same issue(failed to complete staging state).Thank you for your time.
    ~I will provide any further info if needed.

    Thank you for pointing me in the right direction Milos. Yes I ALWAYS google my issues before going on forums for help. And to no avail. However, below is the relevant info(sorry I did not post this the first time;first time dealing with an issue like this,
    so I wasnt for shore what relevant data pertained to this issue):
    I also did not copy and paste the entire log in here(obviously) because its huge, however I will post link to full file if requested/needed, but hopefully I grabbed the entire log for my SP2 update failure issue. All I can grab from this log is that the
    CBS failed. However, I have no clue where to go after that..
    WindowsUpdate.log:
    2015-02-22 19:24:15:093
    940 d10
    AU AU initiated download, updateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107, callId = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
    2015-02-22 19:24:15:093
    940 d10
    AU Setting AU scheduled install time to 2015-02-23 08:00:00
    2015-02-22 19:24:15:106
    940 1538
    DnldMgr *************
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr *********
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Call ID = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Priority = 1, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Updates to download = 1
    2015-02-22 19:24:15:107
    940 1538
    Agent  *   Title = Windows Server 2008 Service Pack 2 for x64-based Systems (KB948465)
    2015-02-22 19:24:15:108
    940 1538
    Agent  *   UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107
    2015-02-22 19:24:15:108
    940 1538
    Agent  *     Bundles 2 updates:
    2015-02-22 19:24:15:108
    940 1538
    Agent  *       {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107
    2015-02-22 19:24:15:108
    940 1538
    Agent  *       {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
    2015-02-22 19:24:15:108
    940 1538
    DnldMgr ***********  DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}]  ***********
    2015-02-22 19:24:15:108
    940 1538
    DnldMgr Contacting regulation server for 2 updates.
    2015-02-22 19:24:15:109
    940 1538
    Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2015-02-22 19:24:15:119
    940 1538
    Misc Microsoft signed: Yes
    2015-02-22 19:24:15:123
    940 1538
    Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2015-02-22 19:24:15:131
    940 1538
    Misc Microsoft signed: Yes
    2015-02-22 19:24:15:134
    940 1538
    DnldMgr Regulation server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
    2015-02-22 19:24:15:135
    940 d10
    AU  # Pending download calls = 1
    2015-02-22 19:24:15:135
    940 d10
    AU <<## SUBMITTED ## AU: Download updates
    2015-02-22 19:24:15:644
    940 1538
    DnldMgr  * Regulation call complete. 0x00000000
    2015-02-22 19:24:15:661
    940 1538
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107]  ***********
    2015-02-22 19:24:15:732
    940 1538
    DnldMgr  * All files for update were already downloaded and are valid.
    2015-02-22 19:24:15:732
    940 1538
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107]  ***********
    2015-02-22 19:24:15:733
    940 1538
    DnldMgr  * Queueing update for download handler request generation.
    2015-02-22 19:24:15:733
    940 1538
    DnldMgr Generating download request for update {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
    2015-02-22 19:24:16:095
    940 1538
    Handler Generating request for CBS update 77DBCA97-29DC-42BA-9DB2-03C7B4D262D4 in sandbox C:\Windows\SoftwareDistribution\Download\2c728f96f2387c9d64aed5c97088b631
    2015-02-22 19:24:16:095
    940 1538
    Handler Selected payload type is ptExpress
    2015-02-22 19:24:16:124
    940 1538
    Handler UH: DpxRestoreJob returned 0x80070002
    2015-02-22 19:24:16:124
    940 1538
    Handler Detected download state is dsHavePackage
    2015-02-22 19:25:32:077
    940 dcc
    AU AU received policy change subscription event
    2015-02-22 19:26:21:898
    940 d40
    Handler FATAL: CBS called Error with 0x80070002, 
    2015-02-22 19:26:21:899
    940 1538
    Handler FATAL: UH: 0x80070002: Async stage operation failed in CUHCbsHandler::StageCbsPackage
    2015-02-22 19:26:21:909
    940 1538
    Handler FATAL: Request generation for CBS update complete with hr=0x80070002 and pfResetSandbox=0 
    2015-02-22 19:26:21:909
    940 1538
    Handler FATAL: Error source is 106.
    2015-02-22 19:26:21:909
    940 1538
    DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80070002.
    2015-02-22 19:26:21:909
    940 1538
    DnldMgr Error 0x80070002 occurred while downloading update; notifying dependent calls.
    2015-02-22 19:26:35:006
    940 1538
    Agent *********
    2015-02-22 19:26:35:006
    940 d10
    AU >>##  RESUMED  ## AU: Download update [UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}]
    2015-02-22 19:26:35:007
    940 1538
    Agent **  END  **  Agent: Downloading updates [CallerId = AutomaticUpdates]
    2015-02-22 19:26:35:007
    940 d10
    AU  # WARNING: Download failed, error = 0x80070002
    2015-02-22 19:26:35:007
    940 1538
    Agent *************
    2015-02-22 19:26:35:007
    940 d10
    AU #########
    2015-02-22 19:26:35:007
    940 1538
    Report REPORT EVENT: {3C6B2054-CE6F-4A29-9E94-D44AB5C4963F}
    2015-02-22 19:24:15:004-0500 1
    147 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Software Synchronization
    Windows Update Client successfully detected 2 updates.
    2015-02-22 19:26:35:008
    940 d10
    AU ##  END  ##  AU: Download updates
    2015-02-22 19:26:35:008
    940 d10
    AU #############
    2015-02-22 19:26:35:008
    940 d10
    AU Setting AU scheduled install time to 2015-02-23 08:00:00
    2015-02-22 19:26:35:008
    940 1538
    Report CWERReporter finishing event handling. (00000000)
    2015-02-22 19:26:35:009
    940 1538
    Report REPORT EVENT: {85DD7E1D-0632-44FF-81F3-34E75B954869}
    2015-02-22 19:26:22:129-0500 1
    161 106
    {D0ABB478-FFD1-448A-9058-939C0B427AD4}
    107 80070002
    AutomaticUpdates Failure
    Content Download Error: Download failed.
    2015-02-22 19:26:35:181
    940 1538
    Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2015-02-22 19:26:35:181
    940 1538
    Report WER Report sent: 7.4.7600.226 0x80070002 D0ABB478-FFD1-448A-9058-939C0B427AD4 Download 106 Unmanaged
    2015-02-22 19:26:35:182
    940 1538
    Report CWERReporter finishing event handling. (00000000)
    2015-02-22 19:26:40:009
    940 1538
    Report REPORT EVENT: {E88B7854-8974-46BE-B243-143ED103C6FF}
    2015-02-22 19:26:35:009-0500 1
    188 102
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Content Install
    Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on ‎Monday, ‎February ‎23, ‎2015 at 3:00 AM:  - Security Update for Windows Server 2008 x64 Edition
    (KB2507618)
    2015-02-22 19:26:40:009
    940 1538
    Report CWERReporter finishing event handling. (00000000)

  • Can we use Windows Server 2012 RDS CAL license in RDS 2008 R2 Server

    Respected Sir,
    We have RDS Server 2012 CAL license select plus  but we want to use Windows Server 2008 R2 RDS so is it possible to use 2012 RDS license in RDS 2008 Server?
    if yes how can put this.
    Waiting for your reply.
    thanks,
    Hiren Patel
    +91 9974091230

    Hi,
    RDS 2012 CALs can license 2008 R2 and 2008 session hosts. However, RDS 2012 CALs only can be installed on the 2012 Licensing server.
    RDS and TS CAL Interoperability Matrix
    http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • 1. Will CAL Licenses works if i use Windows Server 2012? 2. What GB of RAM can be used with Windows Server 2008 Standard Edition?

    I have been using Windows Server 2008 Standard Edition for my business purpose and there are at-least 30 Users who logged in into the server Via Remotely from different location. I want to upgrade my server with latest one with some extra cores and RAM for
    better and smooth operations for all users. So, i have a doubt whether my CAL Licenses will works with Windows Server 2012 or i need to purchase the new one for the same? 
    Moreover, if i don't upgrade my Windows to any 2012 edition and stay on 2008 Standard Edition how much maximum RAM can be installed at a time? is there any limitations? if Yes, please let me know how do i upgrade my Windows 2008 Standard Edition to any other
    business edition to avoid such limitations of RAM?
    Waiting for your favorable and quick response. 

    Hi again,
    th eupgrade optiuon from Standard 2008 to Enterprise 2008 was only available for customers with open value contract with activ esoftware assurance then they can purchase the step up license from Standard to Enterprise.
    the only way to have the Enterprise 2008 Edition is to make th edowngrad efrom 2012 Standard to 2008 Enterprise. it means that if you purchase the 2012 R2 Standard Edition, you may downgarde to Enterprise 2008/2008 R2. th ebest way to make the downgrade
    to 2008 R2 Enterprise is to purchase the current Version 2012 R2 Standard in volume licensing than you can download diretly from VLSC the Enterprise Edition.
    with your downgrade you can still using the 2008 CALs.
    thanks
    diramoh

  • Windows Server 2008 R2: Using PowerShell to send a MSI file to all workstations

    Hello!
    We are currently using Windows Server 2008 R2. In the upcoming months, we are releasing new software. Instead of touching all the machines with gpupdate /force, we would like to know if we could somehow use Windows PowerShell and send that
    command to all the computers in our organization? We are currently in the process of using Group Policy Management to set up the new GPO. After we create them, we would like to send the MSI file to all workstations. I know it is SUPER easy to do within Windows
    Server 2012... as I have read articles and seen screenshots. I am just having a hard time figuring out how to make it work with Windows Server 2008 R2.
    Thanks!
    Megan

    New-PSSession -computername Computer
    where Computer is one of your remote computers.  If that succeeds, great!  But I'm guessing it won't and enabling that on all of your computers would require more effort than what you're trying to accomplish in the first place.
    Psexec is free to download and you don't have to deploy it:
    http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx
    As far as identifying your target computers, it really depends on your environment.  Get-ADComputer is effective, but the example I provided above would get literally every computer in your active directory - is this something you want to deploy to
    any and all servers, workstations, etc?  How big and complex is your AD?  Is this something you need to coordinate with all your systems around about the same time, or can it be staggered?  Do you expect your target computers not to reboot between
    now and then?  I know that's a lot of questions, but your question is loaded and not easy to answer without knowing more about your environment.
    What about this?
    http://technet.microsoft.com/en-us/library/jj134201.aspx
    There is a requirement to have certain firewall exceptions on your target systems, but hopefully they are because that is the best approach.
    I hope this post has helped!

Maybe you are looking for

  • Installing Sharepoint Foundation 2013 for FIM 2010 R2 SP-1

    Hi, As SharePoint Foundation 2013 is supported for FIM  2010 R2 sp-1 on windows 2012. I am trying to install the SharePoint  foundation 2013 on windows 2012. There are some prerequisite(like .net framework,windows Identity framework, sync, windows ap

  • Unable to start Admin server by using weblogic.admin utility

    Hi, I stoped the admin server by using weblogic.admin utility command as bellow. java weblogic.Admin -url http://server1:8008 -username adminuser -password weblogic SHUTDOWN myserver It stopped successfully. But while starting as below i am getting e

  • I just bought a 2012 with the i5 and 4 gb RAM

    I just bought a 2012 with the i5 and 4 gb RAM. Something is NOT right. Right along side it  -for comparison purposes is my macbookpro -2009  -dula core with the stock 4gb ram. The OS is the same  -latest Mtn Lion The mac mini is on its knees. With ZE

  • Error when generating IDoc from MC document - workitem to all the SAP users

    A workflow item with the subject of “Error when generating IDoc from MC document” is sent to all the SAP users' inbox. Is it possible to stop the generation of this work item? If that is not possible, can we limit sending the work item to a specific

  • BizTalk works in Synchronous mode or asynchronous mode

    I am little bit confused that BizTalk receive ports and send ports works in Synchronous mode or asynchronous mode . Any kind of help will be appreciated. Prakash