FTP on Mac OS X Server - not accessible from outside
I need to set up FTP on my mac mini urgently as I need to share over 0,5 TB of video material for a "last-minute" production.
I have set everything up wth shares and all and have a "XYZ" user under "Local Network User" so i can give others this username/password and have services FTP and File Sharing enabled for this user. Yet I can not connect to my server via FTP and 21 port from outside world, although FTP is enabled both on router and as a service in Mac OSX Server app.
What am I doing wrong? VPN and other services such as email and the rest are working like a charm.
Thanks so much!
Any ideas? Still struggling with this problem...
Similar Messages
-
'''My bookmarks used to appear in dropdown menu from the address bar on my iMac G5. I switched to Mac Notebook & from Leopard to Lion. Now my bookmarks are not accessible from the address bar anymore (the line where you type in the website address)'''
There appears to be a problem with Firefox 20 with UNC paths when using roaming profiles on a server.
*[[/questions/955140]] why is the 20.0 address bar unresponsive?
This is currently investigated and tracked via this bug report.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=857672 bug 857672] - Address Bar not working (roaming profiles;UNC path support OS.File)
<i>(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])</i> -
Site not accessible from the Load balanced web front end server - sharepoint 2010
I have a production environment with 2 WFE's(sp-wfe1 & sp-wfe2), 2 APP's and 2 SQL clustered VM's.
2 WFE's are load balanced using hardware load balancer.
An A-Record(PORTAL) is created in DNS for the virtual IP of the load balancer which points to the 2 WFE's.
A web application is created on the WFE's on port 80.
alternative access mapping is configured and the load balanced record "http://PORTAL" is used under the default zone.
Under IIS I have edited the bindings for the sharepoint site at port 80 and added the HOSTNAME as PORTAL.
Result: The site is accessible from outside the server and works fine.
ISSUE: The site is not accessible within the WFE's(sp-wfe1 & sp-wfe2).
When I browse the site from the WFE's server it ask for the credentials and when I enter the credentials and click OK it ask the credentials again and again and in the end displays a blank page.
Kindly help me in this issue because I am clueless and couldn't find anything helpful on the internet.
Regards,
Mudassar
MADDY-DEV Forum answers from Microsoft ForumLoop back check.
http://www.harbar.net/archive/2009/07/02/disableloopbackcheck-amp-sharepoint-what-every-admin-and-developer-should-know.aspx -
Livecache lock server not accessible after system refresh
Hello,
I have performed a refresh of SCM + livecache from production to QA when starting the livacache from LC10 i get a message Livecache lock server not accessible. The livecache is started but when i look at the status there is a warning SQL access not possible.
I did an export of the config table and reimport and the server named are correctly defined for:
LCA
LDA
LEA
From the administration report of LCA
Initialize livecache
Follow-up Processing: /SAPAPO/DELETE_LC_ANCHORS
Start Livecache
Follow-up Processing: SLCA_LCK_SYNCHOWNERS
By running those program in se38
SLCA_LCK_SYNCHOWNERS (Livecache lock server not accessible)
SLCA_NON_LC_RELEVANT_CLIENT (Could not create a connection to livecache)
I checked and the relevant client is selected.
When i check the alert monitor from livecache - lca - connectivity - dbmrfc and native sql is in red with the following message:
SQL Statement Execution Instance Online, but no SQL access possible.
Also from SM21 i have errors saying Database error -4025 at CON
Let me know if you already encountered this issue and how it was resolved.
Thank you,
Martin Mayer
Edited by: Martin Mayer on Jan 4, 2012 4:02 PM
Edited by: Martin Mayer on Jan 4, 2012 4:07 PMI have checked that tread already the thing is when performing the check In db59, I´ve the LCA,LDA,LEA it fails.
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
SQL Code: 4025
Edited by: Martin Mayer on Jan 4, 2012 5:26 PM -
Sharepoint WFE server not accessible
Below is a SharePoint network diagram in which there are 2 Sharepoint WFE servers (3 and 4). Sharepoint 2013 is installed and farm configured on both the servers, first on Server3 then on Server4. When installing on server4 we have joined it to the existing
Sharepoint farm which is (Server3). When Server3 is switched off the application is down and central administration is not accessible from Server4. If Server4 is switched off and Server3 is switched on, Central administration site of Server3 is accessible.
However both are using the existing SAN DB.
Is it possible for Server4 to work the same way if Server3 is down?Have you followed the CA high availability guide:
http://www.harbar.net/articles/spca.aspx
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Method not accessible from other classes
Hi,
I ve defined a class and would like to create an instance of it from another class. That works fine, I am also able to access class variables. However the class method "calcul" which is defined as following, is not accessible from other classes:
class Server {
static String name;
public static void calcul (String inputS) {
int length = inputS.length();
for (int i = 0 ; i < length; i++) {
System.out.println(newServer.name.charAt(i)); }
If I create an instant of the class in the same class, the method is then available for the object.
I am using JBuilder, so I can see, which methods and variables are available for an object. Thanks for your helpcalcul is a static method, that means you do not need an instance of server to run this method. This method is also public, but your class Server is not, your Server class is package protected. So only classes within the same package has Server can use its method. How to use the calcul method?// somewhere in the same package as the Server class
Server.calcul( "toto" ); -
Why are protected fields not-accessible from sub-classed inner class?
I ran across a situation at work where we have to sub-class an inner class from a third-party package. So, it looks something like this...
package SomePackage;
public class Outer {
protected int x;
public class Inner {
package OtherPackage;
public class NewOuter extends Outer {
public class NewInner extends Outer.Inner {
}Now the NewInner class needs to access protected variables in the Outer class, just like the Inner class does. But because NewOut/NewInner are in a different package I get the following error message.
Variable x in class SomePackage.Outer not accessible from inner class NewOuter. NewInner.You can still access those protected variables from the NewOuter class though. So, I can write accessor methods in NewOuter for NewInner to use, but I am wondering why this is. I know that if NewOuter/NewInner are in the same package as Outer/Inner then everything works fine, but does not when they are in different packages.
I have to use JDK1.1.8 for the project so I don't know if there would be a difference in JDK1.2+, but I would think that nothing has changed. Anyway, if you know why Java disallows access as I have detailed please let me know.Although I don't have the 1.1.8 JDK installed on my system, I was able to compile the following code with the 1.3.1_01 JDK and run it within a Java 1.1.4 environment (the JVM in the MSIE 5.5 browser). As long as you don't access any of the APIs that were introduced with 1.2+ or later, the classes generated by the JDK 1.2+ javac are compatible with the 1.1.4+ JVM.
//// D:\testing\SomePackage\Outer.java ////package SomePackage ;
public class Outer {
protected int x ;
public Outer(int xx) {
x = xx ;
public class Inner {
}//// D:\testing\OtherPackage\NewOuter.java ////package OtherPackage;
import SomePackage.* ;
public class NewOuter extends Outer {
public NewOuter(int xx) {
super(xx) ;
public class NewInner extends Outer.Inner {
public int getIt() {
return x ;
}//// D:\testings\Test.java ////import OtherPackage.* ;
import java.awt.* ;
import java.applet.* ;
public class Test extends Applet {
public void init () {
initComponents ();
private void initComponents() {
add(new Label("x = ")) ;
int myx = new NewOuter(3288).new NewInner().getIt() ;
TextField xfld = new TextField() ;
xfld.setEditable(false) ;
xfld.setText(Integer.toString(myx)) ;
add(xfld) ;
}//// d:\testing\build.cmd ////set classpath=.;D:\testing
cd \testing\SomePackage
javac Outer.java
cd ..\OtherPackage
javac NewOuter.java
cd ..
javac Test.java//// d:\testing\Test.html ////<HTML><HEAD></HEAD><BODY>
<APPLET CODE="Test.class" CODEBASE="." WIDTH=200 HEIGHT=100></APPLET>
</BODY></HTML> -
NVIDIA GeForce GTX 770 Mac/Adobe QT32 Server (Not Responding)
Has anyone else used a NVIDIA GeForce GTX 770 4GB on a mac in AE? We just got one from Macvidcards and AE seems really slow starting and closing.
In fact when you quit the MediaCore then hangs for ages when you restart. I edited the supported Raytracer setting and it is seen and can use Cuda.
Also is anyone still getting "Adobe QT32 Server (Not Responding)", every time you start AE? If you look in process viewer it shows up.
Mid 2010 Mac pro
AE Version 13.1.1.3
Mac os x 10.10.1
NVIDIA GeForce GTX 770 Mac 4gb
32GB RAMfixing permissions problem that impedes start of Adobe applications
And, if that's not it: troubleshooting QuickTime errors with After Effects -
Not able to access my Gmail in my iphone. Error message pops up
"...... mail server not responding ........"Did this used to work or have you just set it up for Gmail access? Did you do it in accordance with: http://support.apple.com/kb/ht4810 ?
Are you accessing it via cellular network or WiFi? If WiFi then is this your usual network?
If it has been working fine for some time and now suddenly you get this message having changed nothing then it is most likely a temporary glitch at Google end or your ISP perhaps. -
Files not accessible from local view
Hello,
I recently got a new computer (iMac 11,3) and transferred all files from a backup drive. Since then, the local view in Dreamweaver's file panel does not display the files in my local root folder. The files are visible and accessible from the desktop. I can open them in Dreamweaver by dragging them onto the Dreamweaver icon, but I can't put them to the remote server (get and put commands are grayed out). I've edited the site settings, and defined a new site with a new local root folder, but still have the same problem. I'm using DW cs3. The old computer was an iMac G5, with a non-Intel processor. I hope that's not the problem.
Thanks!Local:
Site name: Neal homepage
local root folder: Sesostris:Users:nskorpen:Documents:Neal homepage:
Default image folder: (blank)
Links relative to : Document
HTTP address: http://www.nealskorpen.com/
case sensitive links: off
cache: disabled
Remote:
Access: FTP
FTP host: www.nealskorpen.com
Host directory: /public_html/
login and password: I'm not going to list these here. I tested the
connection and they worked.
Use passive FTP: disabled
Use IPv6 transfer mode: disabled
use firewall: disabled
use SFTP: disabled
Maintain synchronization information: enabled
Automatically upload files to server on save: disabled
check in/out: disabled -
Me outgoing mail server not working from iPhone / Reply to email address
Hi, I have MM sent up on my iPhone and Mac, the SMTP outgoing mail server does not work from the iPhone but does from the Mac, to get around this I changed the outgoing server on the iPhone to my optusnet outgoing server, that has been working fine, the problem I have is if someone reply's to a email from the phone it gets bounced back becuase the reply to email address for me is @mac.com not from @me.com
I have tried to change the reply to email address in the phone but it only allows you to change the name not the @mac.com
I have only ever had a Me account not a .Mac account so I dont know why its locked to @macI deleted the MM account on the phone and reinstalled it again. Now it is working.
-
Windows server anywhere access not working from outside the lan
ok so heres what i have done so far i installed windows server 2012 essential on a computer followed the wizard to add a couple of users and gave them anywhere access followed the wizard and ran the anywhere access to completion setup the ports 80 and 443
on router manually to forward to my router ip 10.0.1.20
my server is still on dynamic ip
then i go to a windows 7 ultimate computer whent to the connect url downloaded the connect tool ran to completion and restarted the computer so far everything working inside my lan i can connect to the server see shared files and open the dash management
now i go outside connect to a wired or wireless network of a friend and try to connect to http://xxxxxxx.remotewebaccess.com
but am unsuccessfull then i check on my network adapter page and see that there is a new adapter that is called as my remotewebaccess.com so i click on it and try to connect but still fails........
please help what am i doing wrong?
i checked everywhere and cant find a solution.
Thank youIt is probably better to assign a static IP to your server, but OTH it may not change. But you really hate to go off on vacation and have the ip change and everything break.
Now you said you forwarded ports 80 and 443 to your router, I bet you meant your server?
Do www.whatismyip.com and from outside ping xxxx.remotewebaccess.com and make sure they are true same ip
From a PC or the server on your network go to grc.com and do shields up and make sure it reports 80 and 443 as open
Grey -
JSPs not accessible from client browser
Hi all,
I deployed a working, tested J2EE application on a Win 2003 server running OAS 10.1.2.0.2. The application deployed smoothly and is running fine from the server itself.
But from a client machine (another machine on our LAN), I am unable to access any JSP, including index.jsp. I am able to, however, access the login page if I supply the actual .do url (login/Login.do). I can see from the logs that login is completing successfully, but the resultant JSP page is again not thrown to the browser. I am getting a "server not found" error.
The server resides in the IP domain a.b.6.xxx, and the client has an IP like a.b.7.xxx. Could this cause any issues?
Any insights on this problems would be appreciated. Please ask for any other info that you need.
HarishHi ssivanan,
I need more information to asnwer for your question. Can you pls put your configuration ?
Here are some points I like to check.
+ Are you able to browse the contents locally, specifying own ip address on the one of servers ?
+ Do those servers have a route to vlan 30 ?
+ How does the browsing not working ? Can you elaborate ?
+ What do you see in "show conn" when it fails ?
Great documents on CCO. Worth checking.
http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_%28ACE%29_Module_Troubleshooting_Guide%2C_Release_A2%28x%29_--_Troubleshooting_Connectivity
- Kim -
SSH and media wiki not connecting from outside of my LAN
I cant seem to connect to ssh or my mediawiki server from outside of my LAN. Ive forwarded all the needed ports and been going over my config all night. I also made sure my router wasn't blocking anything.
-ssh tells me connection denied
-when i go to my http server i can list directorys but as soon as i try to load media wiki i get a 502 error
*these problems do not happen if im connecting from another machine in my local LAN
This is my sshd_config
# $OpenBSD: ssh_config,v 1.25 2009/02/17 01:28:32 djm Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
#Host *
# ForwardAgent no
# ForwardX11 yes
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
#HostbasedAuthentication yes
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# BatchMode no
# CheckHostIP yes
#AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
#Port 22
Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,[email protected],hmac-ripemd160
# EscapeChar ~
# Tunnel yes
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
#RSAAuthentication yes
#PubkeyAuthentication yes
#HostbasedAuthentication no
#PasswordAuthentication no
#HashKnownHosts yes
#StrictHostKeyChecking ask
#LoginGraceTime 120
#PermitRootLogin no # (put yes here if you want root login)
hosts.deny
# /etc/hosts.allow
sshd: ALL
mysqld: ALL
# End of file
# /etc/hosts.deny
ALL: ALL: DENY
# End of file
hosts.allow
# /etc/hosts.allow
sshd: ALL
mysqld: ALL
# End of file
I feel like its a security policy or something im not catching.
Ive been searching and working to fix this all night to no avail.
Thanks ahead of time for any help.djszapi wrote:
Hello ahronzombi!
Do you try it with apache web server ? If yes, is there any related information in the apache.log when someone try to connect from out. What's in your http server related config files, vhosts, etc?
Ill try that today. i tried something similar with sshd and looked at the verbose output of the program when trying to connect remotely. it was never touched, like no one tried to connect. i feel like its a network security issue since i can connect locally. but ill check these logs as well -
SMB not working from outside local network
Hello,
On my old MacBook I installed OS X Server to create a file sharing server. I set it up using my public IP address so that I could access my files from outside the local network. I don't have an Apple router, but I found the port number for SMB and AFP and did the port forwarding. My issue is that smb stopped working. It used to work out side the network because it tested it. My Mac can still connect though outside the local network using my public IP. I have no clue why SMB is not working as it was working recently. My only idea is that I got a new modem from my ISP. Could that make a difference? I don't get it because AFP still works fine. File sharing using SMB is checked in the server app and file sharing preferences so it is not that. I am using OS X 10.8.4 on a MacBook running OS X Server version 2.2.1. Any help would be appreciated.
Thanks,
MichaelIs it a modem only, or is it a modem/router that might be creating a double-NAT on your network?
Incidentally, since you're running Server, you might want to use the built-in VPN gateway to give yourself better security - tunneling AFP/SMB through a router/firewall is pretty insecure.
Matt
Maybe you are looking for
-
Function Tab is missing under Authorization Data in ERM
Hi, After Uploading roles to the ERM, the functions tab under authorization data is missing. In the QA the same role has all 4 tabs (including the functions tab) I've made sure that the "This option allows you to add a function to an authorization" i
-
Date of last movement in Query
Dear all, I have a query in which I would like to display the last movement of goods. The Key figures are 1. Quantity receipt stock 2. Quantity issued stock I would like to get the last date of either last receipt stock amount or the last issued stoc
-
Exporting from SAP Crystal Presentation Design to PowerPoint
I have been using CrystalXcelsius Standard 4.5 with Windows XP for a couple years. My company recently migrated to Windows 7. I've been told the new version of Xcelsius I need to purchse is SAP Crystal Presentation Design which is supposed to be co
-
Hi friends, I have developed webdunpro application.. when i am executing this, i am getting standard message " No messages" on top of application .. I searched many.. But not able to figure out,.. let me know ur ideas.. Thanks, kani
-
I have just purchased the new Canon 7D II. I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered. I have updated both CS6 and LR so that is not the prob