FTP - Permission Denied

Can anyone help. I have recently set up file sharing on a Mac server. I have set both my internal hard drive and external hard drive as share points. I can navigate the external one fine but when I try and navigate the internal one I get the error:
NOOP
200 NOOP command successful.
CWD /OS X/Applications
550 /OS X/Applications: Permission denied.
Can anyone help?

>
pawan kumar wrote:
i m getting output XML file in my system.but i tried with directly one to one mapping in message mapping, now i did some modification in Message mapping like i concatenate name by X in message mapping and in description i passed ZSUBHODIP as constant then in output i am not getting concatenateed value and constant ZSUBHODIP in name and description.
Hi,
Did you activate the message mapping after modification ??
If yes, test the mapping in test tab and let us know the exact error.
Regards,
Chandra

Similar Messages

FTP exception: Can't open passive connection: Permission Denied

I have a File sender adapter, with FTP as transport protocol.
The adapter polls a directory each 60 seconds.
All works perfectly but sometimes I get the following error :
Channel CC_GBL_FlatFileSender: Error connecting to ftp server ...: com.sap.aii.adapter.file.ftp.FTPEx: 425 Can't open passive connection: Permission denied.
And 60 seconds after, no more error.
Any idee of why I get this error occasionally ?
In the sender file adapte, data connection is set to Passive. Do I have to set it to Active ?
Thanks in advance,
Laurence

Hi
Data Connection
- Active
In active mode, the server establishes a data connection from its data port, port 20, to an end point chosen by the client.
- Passive
In passive mode, the client establishes a data connection to the port required by the server.
The default setting is a passive data connection. Only change this setting if you have a specific reason. This is what is recommended by SAP.
It is possible that Passive FTP mode may terminate session.
In this mode the server "listen" on a data port (which is not its default data port) and to wait for a connection rather than initiate one upon receipt of a transfer command. The response to this command includes the host and port address this server is listening on.
In the FTP protocol two ports are normally used, 20 and 21.
Port 21 is the control channel in which requests such as PUT, GET, and PWD are sent to the server.
Port 20 is the data channel in which actual files, folders and directory
listings are sent.
Normally, when you connect to an FTP site, the site establishes the data
connection to your PC (the client) on Port 20. However, if the site allows
passive transfers, you can have your PC establish the data connection. It is
recommended that you use passive mode for most transfers.
Regards
Sumit Jain
**Reward with points if you find it useful.

PERMISSION DENIED IN FTP SERVER

Hi all,
i have XML to XML scenario. i have put xi_input.xml in my system and made delete mode in sender communication channel. but its not picking and deleting the data, its giving error in FTP serve as "permission denied" and in runtime work bench error is "Failed to delete file 'xi_input.txt' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Permission denied'. For details, contact your FTP server vendor.". please help me
thanks and regards

>
pawan kumar wrote:
i m getting output XML file in my system.but i tried with directly one to one mapping in message mapping, now i did some modification in Message mapping like i concatenate name by X in message mapping and in description i passed ZSUBHODIP as constant then in output i am not getting concatenateed value and constant ZSUBHODIP in name and description.
Hi,
Did you activate the message mapping after modification ??
If yes, test the mapping in test tab and let us know the exact error.
Regards,
Chandra

Receiver File adapter - FTPEx: 550 Permission denied

Hi all,
We are getting the following error from a File receiver comm. channel:
Delivery of the message to the application using connection AFW failed, due to: com.sap.aii.adapter.file.ftp.FTPEx: 550 Permission denied to "inbound"..
The FTP connection is anonymous so anyone (within our network) can login on this server, folder rights are also set to all i.e. anonymous user can create, read, delete files on the target folder.
I have tested to the target folder using IE browser, I was able to logon the server, read, create and delete files.
Has anyone of you an idea why the adapter engine still cannot create a file?
Regards,
Roberto

> Hi Roberto,
> 'Anonymous' is a default user that exists in Unix
> nix layer. But for this user also you need to provide
> the file write/read/delete permissions into the
> folder. Then only you can write a file evenif you are
> using 'Anonymous' User.
>
> Cheers
> JK
Hi there,
As explained before; we have tested the same FTP connection (using the same anonymous account) via a DOS session and also via IE (from the XI server), both tests were successful and we were able to create/delete files without any problem.
So again, the problem is only with the File/FTP adapter which for some unexplained reason cannot get access to this folder.
Are there any special (not mentioned in the SAP documentation?) prerequisites to establish a FTP connection using the file adapter?
Any help is highly appreciated!
Thanks, Roberto
BTW; we are on SP14 and the XI server runs under a Windows Server machine.
Message was edited by: Roberto Viana

Receiver File Adapter - Permission Denied

Hi,
I have a problem with posting a file to a specific address at a ftp (file adapter). I get the follwing error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: XI_ftp_467febcd-b4df-25c4-e100-00000af501ca.tmp: Permission denied.: com.sap.aii.adapter.file.ftp.FTPEx: 553 XI_ftp_467febcd-b4df-25c4-e100-00000af501ca.tmp: Permission denied.
I have no problem posting to other addresses so the file adapter is working. I have two things that I can thing of, that is different from the ones working.
- The username and the address both has "_" in them.
user: com_test
address: /test/comp_test/
- The password contains special characters
password: Q2bE3x (example)
Can any of those things be the problem or is there somthing else?
Best Regard
Claes

Check out the directory has enough permission to write on...atleast 660
also make sure that, FTP site is able to connect from the PI via ftp command..
Hope this helps,
Rgds,
Moorthy

SAP ROUTE PERMISSION DENIED

Hi Experts,
When i try to logon SAPNET from T/Code OSS1 its througing error as
"sapsrv2a: route permission denied(12.34.23.5 to oss1 sapdp01)
Location SAPoruter 37.15 on sapserv2a
Component NI
Release 640
Version 37
Return Code -93
Counter 5
Kindly suggest any solution for this problem
Thanks in Advance,
Ramamurthy

HI
I have this error too if I try to logon to sapnet with OSS1 transaction.
you must logon to sapnet trought internet explorer http://service.sap.com
Note 33135 - Guidelines for OSS1
Note Language: Version: 15 Validity: valid since 30.06.2006
PDF Download Corrections Compare Versions SSCR
 Go to SAP Note: Display
Content: Summary | Header Data | Releases | Related Notes
Summary
Symptom
You are using transaction OSS1 to establish a remote connection.
Other terms
OSS1, RFC connections to SAPNet - R/3 Frontend, SAPOSS, OSS_RFC, SAProuter
Reason and Prerequisites
Remote connection to SAP, R/3 system
Solution
On April 03, 2006, SAPNet - R/3 Frontend was deactivated as a user interface. SAPNet - R/3 Frontend, which was introduced in 1995 as SAP's Online Service System (OSS), was SAP's first and, for a long time, its only support system, which customers worldwide accessed using transaction OSS1.
Today, the SAProuter connection via transaction OSS1 continues to be used for the following RFC connections:
- Transfer of EarlyWatch Alert data
- Exchange of data using the SAP Notes Assistant
To install and configure this transaction, proceed exactly as follows:
1. Making the technical settings for OSS1
You must configure transaction OSS1 before you can use it. Choose "Parameter" from the menu bar (-> Techn. Settings) and choose "Change".
The technical settings for transaction OSS1 are set by default to Walldorf (sapserv3) with the IP address 147.204.2.5. If this address does not correspond with the entry in your host file, choose the sapserv3 IP address that is valid for you by choosing the menu option "SAPRouter at SAP -> Walldorf".
Furthermore, enter your local SAPRouter information in the "SAPRouter 1" fields. Now save the settings.
After making these changes, the screen for the technical settings should be as follows:
Router data for the logon to SAPNet - R/3 Frontend
-Customer SAPRouters----
-SAPRouter 1---- -SAPRouter 2----
Name my_saprouter
Name
IP Address x.x.x.x
IP Address
Instanc No. 99
Instance No.
-SAPRouter and OSS Message Server at SAP----
-SAPRouter at SAP---- -OSS Message Server----
Name sapservX
Name oss001
IP Address x.x.x.x
DB Name O01
Instance No. 99
Instance No. 01
NOTE:
Replace sapservX with the following values:
sapserv1 (194.117.106.129) connection via Internet VPN
sapserv2 (194.39.131.34) connection via Internet SNC
sapserv3 (147.204.2.5) for customers with connection to Germany
sapserv4 (204.79.199.2) for customers in America
sapserv5 (194.39.138.2) for customers with connection to Japan
sapserv6 (194.39.139.16) for customers in Australia and New Zealand
sapserv7 (194.39.134.35) for customers in Asia
Choose "Start Logon to SAPNet - R/3 Frontend". If the system issues message S1 452, there are errors in the operating system configuration. In this case, see appendix A.
When you install an access authorization file "saprouttab", you should ensure that all of your front ends and R/3 servers can establish a connection to sapserv3, service sapdp99. Appendix E contains examples of saprouttabs. For more information on the SAPRouter, refer to the SAPRouter documentation (Note 30289).
Try it again until the dialog box "Please select a group" appears. If the dialog box "Please select a group" is displayed, the configuration for transaction OSS1 is correct. You can then proceed with the next section.
NOTE:
When you try to log on to SAPNet - R/3 Frontend, the system issues an error message indicating that you are no longer allowed to log on to SAPNet - R/3 Frontend.
2. Further questions?
As soon as you have carried out the steps described above, transaction OSS1 should connect you to the most efficient SAPNet - R/3 Frontend application server.
If you have further questions or problems, the file entitled "OSS1. TroubleShooting" contains additional information. If you have a problem that you cannot solve, contact our hotline: 0180/5 34 34 3-3.
Appendix A
If message S1 452 appears when you try to log on to SAPNet - R/3
Frontend with transaction OSS1, there is an incorrect setting somewhere (either in the technical settings for OSS1 or at operating system level).
To find out why the connection to the message server was unsuccessful, choose Tools (Case, Test ( Developer trace (transaction ST11). The trace contains an entry for dev_lg. This file contains the error log. The LOCATION line, if available, contains the host on which the error occurred. The problem description is found in the ERROR line. If you cannot find the entry dev_lg, check whether the program "lgtst" exists (see appendix B).
Examples of the contents of dev_lg:
ERROR partner not reached (host abc.def.gh.i, service sapdp99)
TIME Thu Aug 10 09:17:57 1995
RELEASE 21J
COMPONENT NI (network interface)
VERSION 15
RC -10
MODULE niuxi.c
LINE 773
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 1
Here, the system could not reach the SAPRouter. For example, no SAProuter could be found under service 99 (port 3299) on the host with the IP address abc.def.gh.i. The SAPRouter process does not work or the IP address was not configured correctly in OSS1.
ERROR service 'sapdp99' unknown
TIME Thu Aug 10 09:22:00 1995
RELEASE 30A
COMPONENT NI (network interface)
VERSION 17
RC -3
MODULE niuxi.c
LINE 404
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
This message indicates that the service sapdp99 was not entered in /etc/services. Add the entry in /etc/services. This must be available on all R/3 servers and front ends.
LOCATION SapRouter on abc.def.gh.i
ERROR route permission denied (XXXXXXXX to sapservX, sapdp99)
TIME Thu Aug 10 09:37:44 1995
RELEASE 30A
COMPONENT NI (network interface)
VERSION 17
RC -94
MODULE nixxrout.c
LINE 1426
COUNTER 1
The file saprouttab, which contains the valid connections, is not correct. The SAPRouter on the host abc.def.gh.i does not set up the connection to sapservX. Check the SAPRouter file saprouttab. This should contain every R/3 server and frontend (see also appendix E).
LOCATION SapRouter on abc.def.gh.i
ERROR internal error
TIME Thu Aug 10 10:50:18 1995
RELEASE 21J
COMPONENT NI (network interface)
VERSION 15
RC -93
MODULE niuxi.c
LINE 773
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 242
ERRNO TEXT No route to host
COUNTER 1
This error message indicates that the host abc.def.gh.i cannot process the IP address of the next host configured in OSS1. If the SAPRouter error message appears and the next host is sapservX, check the address for sapservX. OSS1 is delivered with the default settings sapserv3 and IP address 147.204.2.5. Customers in the U.S.A. are normally connected to sapserv4, IP address 204.79.199.2. If required, change the technical settings of OSS1 accordingly.
ERROR internal error
TIME Thu Nov 23 00:11:20 1995
RELEASE 21J
COMPONENT NI (network interface)
VERSION 15
RC -1
COUNTER 1
This message shows that the instance number entered does not agree with at least one of the technical settings for the SAPRouter defined in OSS1. The default for the instance number of the SAPRouter is 99. Under no circumstances should you enter the instance number of your R/3 system for the SAPRouter. You need to specify instance number 99 for sapservX. Otherwise, it is not possible to log on to SAPNet - R/3 Frontend.
LOCATION SapRouter on sapservX
ERROR route permission denied (XXXXXX to oss002, sapmsO01)
TIME Mon Nov 27 19:25:54 1995
RELEASE 30A
COMPONENT NI (network interface)
VERSION 15
RC -94
MODULE nixxrout.c
LINE 1390
COUNTER 1
An incorrect server was entered as message server 001, in this example, the server oss002. The message server for O01 is oss001. Change the technical settings for transaction OSS1 accordingly.
Appendix B (for Windows NT only)
Change to the directory "\usr\sap\<SID>\SYS\exe\run" and search for the program "lgtst.exe". If you cannot find it, or if the length of this file is not exactly 640216 bytes, import the program "lgtst.exe" from sapservX via ftp:
> ftp sapservX
Connected to sapservX.
220 sapservX FTP server (Version 1.7.194.2 Wed Sep 8 17:23:04 GMT 1993) ready.
Name: ftp
331 Guest login ok, send ident as password.
Password: <Your_customer_number>
ftp> cd dist/permanent/OSS1/lgtst.exe
250 CWD command successful.
ftp> binary
200 Type set to I.
ftp> get lgtst.exe
150 Opening BINARY mode data connection for lgtst.exe (640216 bytes).
226 Transfer complete.
640216 bytes received.
ftp> bye
Copy this file into the aforementioned directory.
Appendix C
The messages from transaction OSS1 (error messages and information) are given in the following list. Each message is described briefly.
|No.| Message Text
|450| Maintain technical settings first.
|452| Unable to connect to SAPNet - R/3 Frontend message server.
|454| E: Unable to start SAPGUI.
|455| SAPGUI was started.
|456| Specify a server name.
|457| Specify an IP address.
|458| Specify an instance number.
|459| Specify a database name.
|460| No authorization to log on to SAPNet - R/3 Frontend.
|461| No authorization to maintain technical settings.
|462| E: RFC destination could not be generated
Number 450: Maintain technical settings first
You can only log on to SAPNet - R/3 Frontend if the technical settings
are maintained. The technical settings determine the network path from the customer R/3 system to the online service system.
Number 452: Unable to connect to SAPNet - R/3 Frontend message server.
This message appears if the connection to the SAPNet - R/3 Frontend message server was not possible (system name O01, server oss001). There can be different reasons for this (see appendix A).
Number 454: E: Unable to start SAPGUI.
Transaction OSS1 could start the SAPGUI (not SAPTEMU), either because the program does not exist in the path given, or because the execute permission is not set correctly. Check whether the SAPGUI exists; SAPTEMU alone is not sufficient.
Number 455: SAPGUI was started.
This is not an error message. It merely informs you that an additional SAPGUI was started to establish a connection to SAPNet - R/3 Frontend.
Number 456: Specify a server name.
The server name was omitted from the technical settings.
Number 457: Specify an IP address.
The IP address was omitted from the technical settings.
Number 458: Specify an instance number.
The instance number was omitted from the technical settings.
Number 459: Specify a database name.
The database name for the Online Service System (001) was omitted from the technical settings.
Number 460: No authorization to log on to Online Service System
You do not have authorization to call transaction OSS1. Up to Release 2.2F: The authorization S_TSKH_ADM is checked for value 1. After Release 2.2F: For transaction OSS1, there are two special authorization profiles (see appendix D).
Number 461: No authorization to maintain technical settings.
You do not have the authorization to maintain the technical settings (see appendix D).
Number 462: E: RFC destination could not be generated.
In Releases 2.2, you can ignore this message. When saving the technical settings, an attempt is made to generate the RFC destination SAPOSS. The length of an RFC destination is limited in 2.2, and the maximum length was exceeded by the parameters of the technical settings.
Appendix D
As of Release 2.2F, there are two different authorization profiles for transaction OSS1: S_OSS1_START and S_OSS1_ADMIN.
S_OSS1_START authorizes you to call transaction OSS1 and to log on to the Online Service System. In addition, S_OSS1_ADMIN contains the
authorization to maintain the technical settings for the transaction.
The technical settings of OSS1 must be made at least once. Therefore, add S_OSS1_ADMIN to your user profile, log off, and then log on again afterwards.
Appendix E
Prerequisites:
(A TCP/IP connection can be established between the SAProuter on
the customer system and the SAProuter on sapserv3 in Walldorf.
(The SAProuter process must be started on the server that is registered
with SAP:
saprouter -r -R saprouttab &
Example of the "saprouttab" file with minimum configuration:
saprouttab - Example
Allows connections from the entire customer network to sapservX
and therefore to the Online Service System via SAProuter port 3299.
P * sapservX sapdp99 *
Allows connections from sapserv3 to the entire customer network,
for example for EarlyWatch or First Level Support.
P sapservX * * *
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 09:13:57
Priority: Correction with high priority
Category: Consulting
Primary Component: XX-SER-NET Network connection
Antonio.
Edited by: Antonio Voce on May 22, 2008 5:07 PM

Why is permission denied on trying to download the GB English version of Firefox 3.6.10?

I am trying to roll back to the previosu version of Firefox - v3.6.10 - the GB English version - too see if the problem of Firefox hanging when you search bookmarks goes away. I get permission denied from the FTP site.

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Download a new copy of the Firefox program
* Firefox 3.6: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Permission Denied ! { SOLVED }

Well I 've gone and done it again somehow and would appreciate some help ;
[wesley@ratdog ~]$ nano /etc/pacman.d/mirrorlist
[wesley@ratdog ~]$ cd /etc/pacman.d
[wesley@ratdog pacman.d]$ cp mirrorlist mirrorlist.backup
cp: cannot create regular file `mirrorlist.backup': Permission denied
[wesley@ratdog pacman.d]$
Wanted to run rankmirror and got the above instead ( http://tinyurl.com/36gl8l )
Yaourt , Powerpill and Pacman all complaining .
Here's Powerpills output for example , (this is to be expected but with a new error message ! ) ;
[wesley@ratdog ~]$ powerpill -Syu
:: Synchronizing package databases...
error: failed retrieving file 'testing.db.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'testing.db.tar.gz' from mirrors.easynews.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirrors.easynews.com : Not Found
error: failed retrieving file 'testing.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirrors.gigenet.com : Not Found
error: failed retrieving file 'testing.db.tar.gz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from www.gtlib.gatech.edu : Not Found
error: failed retrieving file 'testing.db.tar.gz' from mirrors.hosef.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirrors.hosef.org : Not Found
error: failed retrieving file 'testing.db.tar.gz' from ibiblio.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from distro.ibiblio.org : Not Found
error: failed retrieving file 'testing.db.tar.gz' from archlinux.linuxfreedom.com : Not Found
error: failed retrieving file 'testing.db.tar.gz' from locke.suu.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from lug.mtu.edu : Not Found
error: failed retrieving file 'testing.db.tar.gz' from mirrors.xmission.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirrors.xmission.com : Not Found
error: failed retrieving file 'testing.db.tar.gz' from mirror.rit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirror.rit.edu : Not Found
downloading testing.db.tar.gz...
error: failed retrieving file 'core.db.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'core.db.tar.gz' from mirrors.easynews.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirrors.easynews.com : Not Found
error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirrors.gigenet.com : Not Found
error: failed retrieving file 'core.db.tar.gz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from www.gtlib.gatech.edu : Not Found
error: failed retrieving file 'core.db.tar.gz' from mirrors.hosef.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirrors.hosef.org : Not Found
error: failed retrieving file 'core.db.tar.gz' from ibiblio.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from distro.ibiblio.org : Not Found
error: failed retrieving file 'core.db.tar.gz' from archlinux.linuxfreedom.com : Not Found
error: failed retrieving file 'core.db.tar.gz' from locke.suu.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from lug.mtu.edu : Not Found
error: failed retrieving file 'core.db.tar.gz' from mirrors.xmission.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirrors.xmission.com : Not Found
error: failed retrieving file 'core.db.tar.gz' from mirror.rit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirror.rit.edu : Not Found
downloading core.db.tar.gz...
error: failed retrieving file 'extra.db.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'extra.db.tar.gz' from mirrors.easynews.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirrors.easynews.com : Not Found
error: failed retrieving file 'extra.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirrors.gigenet.com : Not Found
error: failed retrieving file 'extra.db.tar.gz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from www.gtlib.gatech.edu : Not Found
error: failed retrieving file 'extra.db.tar.gz' from mirrors.hosef.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirrors.hosef.org : Not Found
error: failed retrieving file 'extra.db.tar.gz' from ibiblio.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from distro.ibiblio.org : Not Found
error: failed retrieving file 'extra.db.tar.gz' from archlinux.linuxfreedom.com : Not Found
error: failed retrieving file 'extra.db.tar.gz' from locke.suu.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from lug.mtu.edu : Not Found
error: failed retrieving file 'extra.db.tar.gz' from mirrors.xmission.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirrors.xmission.com : Not Found
error: failed retrieving file 'extra.db.tar.gz' from mirror.rit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirror.rit.edu : Not Found
downloading extra.db.tar.gz...
error: failed retrieving file 'community-testing.db.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.easynews.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.easynews.com : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.gigenet.com : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from www.gtlib.gatech.edu : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.hosef.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.hosef.org : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from ibiblio.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from distro.ibiblio.org : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from archlinux.linuxfreedom.com : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from locke.suu.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from lug.mtu.edu : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.xmission.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.xmission.com : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from mirror.rit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirror.rit.edu : Not Found
downloading community-testing.db.tar.gz...
error: failed retrieving file 'community.db.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'community.db.tar.gz' from mirrors.easynews.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirrors.easynews.com : Not Found
error: failed retrieving file 'community.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirrors.gigenet.com : Not Found
error: failed retrieving file 'community.db.tar.gz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from www.gtlib.gatech.edu : Not Found
error: failed retrieving file 'community.db.tar.gz' from mirrors.hosef.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirrors.hosef.org : Not Found
error: failed retrieving file 'community.db.tar.gz' from ibiblio.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from distro.ibiblio.org : Not Found
error: failed retrieving file 'community.db.tar.gz' from archlinux.linuxfreedom.com : Not Found
error: failed retrieving file 'community.db.tar.gz' from locke.suu.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from lug.mtu.edu : Not Found
error: failed retrieving file 'community.db.tar.gz' from mirrors.xmission.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirrors.xmission.com : Not Found
error: failed retrieving file 'community.db.tar.gz' from mirror.rit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirror.rit.edu : Not Found
downloading community.db.tar.gz...
archlinuxfr is up to date
archrepo is up to date
archstuff is up to date
arch-games is up to date
error: no write permissions to any of the following cache directories:
/var/cache/pacman/pkg
I haven't been mucking around in there but something is amiss , where to start ? Permissions issue if fixed would go a long way to resolving this me thinks . But how did the cache directory permissions get changed
I've not a clue .
Any and all help appreciated , I apologize for the long post and Thank You .
Last edited by wesley_of_course (2010-01-19 01:24:07)

You are so right , ( not using sudo ) , expected a warning I guess .
Anyways I deleted mirrorlist , repopulated it and ran reflector .
http://dpaste.com/147220/
[wesley@ratdog ~]$ yaourt -Syy
:: Synchronizing package databases...
testing 9.9K 178.2K/s 00:00:00 [#####################] 100%
core 36.0K 210.0K/s 00:00:00 [#####################] 100%
extra 440.9K 174.1K/s 00:00:03 [#####################] 100%
community-testing 1.9K 41.2M/s 00:00:00 [#####################] 100%
community 374.4K 381.3K/s 00:00:01 [#####################] 100%
archlinuxfr 24.1K 56.4K/s 00:00:00 [#####################] 100%
archrepo 25.4K 45.2K/s 00:00:01 [#####################] 100%
arch-games 31.4K 128.1K/s 00:00:00 [#####################] 100%
[wesley@ratdog ~]$ sudo pacman -Syy
:: Synchronizing package databases...
testing 9.9K 99.3K/s 00:00:00 [#####################] 100%
core 36.0K 166.6K/s 00:00:00 [#####################] 100%
extra 440.9K 392.3K/s 00:00:01 [#####################] 100%
community-testing 1.9K 27.5M/s 00:00:00 [#####################] 100%
community 374.4K 300.3K/s 00:00:01 [#####################] 100%
archlinuxfr 24.1K 55.9K/s 00:00:00 [#####################] 100%
archrepo 25.4K 45.5K/s 00:00:01 [#####################] 100%
arch-games 31.4K 131.8K/s 00:00:00 [#####################] 100%
[wesley@ratdog ~]$ sudo powerpill -Syy
:: Synchronizing package databases...
testing 9.9K 185.2K/s 00:00:00 [#####################] 100%
core 36.0K 123.5K/s 00:00:00 [#####################] 100%
extra 440.9K 366.6K/s 00:00:01 [#####################] 100%
community-testing 1.9K 25.2M/s 00:00:00 [#####################] 100%
community 374.4K 375.2K/s 00:00:01 [#####################] 100%
archlinuxfr 24.1K 42.7K/s 00:00:01 [#####################] 100%
archrepo 25.4K 45.0K/s 00:00:01 [#####################] 100%
arch-games 31.4K 131.1K/s 00:00:00 [#####################] 100%
Thanks for the quick reply . I apologize for not investigating further before posting . I was freak'n !
Thanks dcc24 and reed9 !
Last edited by wesley_of_course (2010-01-19 01:32:52)

Error connecting from Mac to Linux via SSH (Permission denied (publickey...

Hello together,
I have a perfectly working setup with my XP machine, Putty and my Suse Linux server that allow for remote login via SSH. I use Public Key authentication.
However, when I try to login from my Mac, all I get from the Mac side is a
"Permission denied (publickey,keyboard-interactive)."
And I can't establish the connection. On the server in 'messages' I get:
"sshd{6046}: Accepted publickey for {userName} from {myHomeIP} port 38335 ssh2"
What could be wrong here?
I would like to use the same keys on my PC and my Mac so I just copied the key files into the .ssh directory on the Mac, did a chmod 600 on them and then tried to remote log-on with the follwoing from the terminal:
"ssh -l {userName} {host} -i {keyFile}"
My questions are:
1) How am I sure that the Mac uses the right key files? (or uses them at all)
2) How come my server says "accept publickey" and no connection is established?
3) Do you have any other idea on how I might get this to work? What I need is a method to copy files (not via FTP) to my server and let the process run without supervision / user interaction.
Thanks a lot for all your help!
Cheers
Message was edited by: Sebastian_R (some typos)

If you copied your files from Windows, I would check to make sure your lines are <LF> terminated. I have not played with Putty so I do not know the way it line terminates its ssh key files, but Windows has a long tradition of using <CR><LF> to terminate its lines.
cat -v ~/.ssh/id_rsa # or whatever your file names are
If there are <CR> characters in the file, they will show up as ^M
Next get more diagnostic information from ssh using an *ssh -v -v -v*
If you know how to tell Putty to do the same thing, do it from Putty as well.
Now compare the debug output from the working vs the non-working ssh commands. The differences will tell you a lot.
If you look at *man ssh* and search for permissions it will tell you what files need restrictive permissions. You can get a permissions denied error if your home directory allows Group or Other write access. The $HOME/.ssh directory needs to be set so ONLY the Owner is allowed to access it. And some of the files in $HOME/.ssh require specific permissions. The ssh man page details this.

Apache user dir (13)Permission denied: access to /~simha/ denied

I am getting Access forbidden! when I am trying to connect to http://localhost/~simha/ where simha is my user name
my /var/log/httpd/error_log says
[Thu Jul 08 17:44:30 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /~simha/ denied
I tried a lot and gave up. Can any one help me in this in regard
The following are the permisions of my home dir simha and public_html
drwx--x--x 130 simha users 16384 Jul 8 17:04 simha
drwxr-xr-x 2 simha users 4096 Jul 8 17:02 public_html
The following are my httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks includes
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# phpMyAdmin configuration
Include conf/extra/httpd-phpmyadmin.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
The following are my /etc/httpd/conf/extra/httpd-userdir.conf
# Settings for user home directories
# Required module: mod_userdir
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch ExecCGI
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
I also tried adding user to the group http. BUt nothing is working.

Do you have [or more like lack] +x on the user folder?

WebCache Failed to start : Failed to assign port 80: Permission denied

Hi All,
I have three server running IAS 10.1.2.0.2, running forms and reports application. One Infra and two Midtier.
Suddenly Midtier1 is crashed, but before it happen I have already backup with TAR : OracleHome and all its related configuration files.
After the crash, I reinstall the RH Linux same version and update and then restore ( TAR -xvf ) the backup that I have.
When I run opmnctl startall, all ias-component started, EXCEPT one : WEB CACHE.
When I look at Webcache event Log, here is the error :
[11/May/2004:17:29:05 +0700] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[11/May/2004:17:29:05 +0700] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[11/May/2004:17:29:05 +0700] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
[11/May/2004:17:29:05 +0700] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
[11/May/2004:17:29:05 +0700] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[11/May/2004:17:29:05 +0700] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[11/May/2004:17:29:05 +0700] [alert 13305] [ecid: -] Failed to assign port 80: Permission denied
[11/May/2004:17:29:05 +0700] [alert 9707] [ecid: -] Failed to start the server.
[11/May/2004:17:29:05 +0700] [alert 9609] [ecid: -] The server process could not initialize.
[11/May/2004:17:29:05 +0700] [notification 9610] [ecid: -] The server is exiting.
[11/May/2004:17:29:05 +0700] [alert 9000] [ecid: -] Process 3268 exit(1) at 890:main.c [Build 10.1.2.0.2 050802]
[11/May/2004:17:29:05 +0700] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oraias/ewallet.p12 does not exist.
[11/May/2004:17:29:05 +0700] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oraias/ewallet.der does not exist.
[11/May/2004:17:29:05 +0700] [warning 11919] [ecid: -] The SSL wallet autologin file /etc/ORACLE/WALLETS/oraias/cwallet.sso does not exist. Wallet does not appear to be autologin wallet.
[11/May/2004:17:29:05 +0700] [warning 11921] [ecid: -] The origin server wallet did not open. Operating without wallet for backend. Only Diffie-Hellman anonymous connections supported to origin servers.
[11/May/2004:17:29:05 +0700] [warning 11922] [ecid: -] Origin Server Wallet wallet fails to open at location /etc/ORACLE/WALLETS/oraias, NZE-28759, as user oraias
[11/May/2004:17:29:06 +0700] [notification 9607] [ecid: -] The admin server started successfully.
How can I solve this problem ?
Thank you for your help,
xtanto

Hi xtanto,
You may not have set up the privileges for running on a port less than 1024 (i.e. port 80) in your old back-uped tar-file.
Please check Chapter 8 "Running webcached with Root Privilege" in the Web Cache Admin document.
http://download-east.oracle.com/docs/cd/B14099_19/caching.1012/b14046/basics.htm#sthref1060
Regards,
Martin

Pages downloaded from the App-store refuses to save: Permission denied. How can I download a new one?

Pages downloaded from the App-store refuses to save: Permission denied. How can I download a new one? Please Advice .

Is the computer yours, and are you the Administrator or a user with administrator rights? Are you allowed to install software on the computer?
Check your "purchased" list. Pages should show there, and if it's not installed it should read "install" next to it.
Have you tried another mac? You can install the purchased software on another Mac by using your AppleID that you purchased the software with on the first mac.
And yes, kerropas se viesti

Error while consolidating (The operation couldn't be completed. Permission denied)

I have just bought a new MacBook and that has given me extra harddrive space, and now I am trying to consolidate some masters in Aperture, that I have on my Time Capsule. But I get this error:
Error while consolidating (The operation couldn’t be completed. Permission denied)
I can access my Time Capsule in Finder perfectly well. Can anyone help?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

"Permission Denied" Error

Hi Gurus
I'm getting this error while creating a new application - "Permission Denied" (in Workbench) and some "HRESULT error" (in Webclient).
Can someone tell me the possible reason relating to this issue?
Thanks in advance.

@SH
I'm not sure. I'll check on that. We created a schema and used the same while creating the application. But never gave a thought of what permissions the user should have. And will you let me know what all permissions are required for that?
@Tony
No errors or failures in the error log. I hope you are asking about: \\Hyperion\logs\fdm\common\commonerror.txt
@Wpaffhausen
OS Versions: Windows NT
DB Versions: Oracle 11g
Version of FDM/EPM: 11.1.1.3

Permission denied error while CBS is building DCs

Hi,
from time to time we get an permission denied error when activating changes. The CBS server tries to check out files into the temporary build folders at the server and cannot do that for one file (see following error message).
As already said this happens only sometimes and only for single files.
Does anyone have the same experience and/or a suggestion how to solve this problem?
When deleting the folder and activating again the error has gone.
Build number assigned: 5843
Change request state from QUEUED to PROCESSING
ACTIVATION request in Build Space "CMS_EBYASZ_D" at Node ID: 9.611.151
 [id: 2.568; parentID: 0; type: 4]
 [options: NO OPTIONS]
REQUEST PROCESSING started at 2005-09-30 12:53:00.074 GMT
===== Pre-Processing =====
List of activities to be activated:
 1 activity in compartment "eon.com_EON_EBY_ASZ_R_1"
 Recherche Splitting Nachtrag 7 (30.09.05, 14:51)
 [seq. no 23][created by H15430J at 2005-09-30 12:52:46.0][ID 4e1a116731af11daa5b00003ba1edce1]
Analyse activities... started at 2005-09-30 12:53:00.172 GMT
 Synchronizing component "eon.com/eby/asz/recherch/util" from repository... finished at 2005-09-30 12:53:01.414 GMT and took 824 ms
 Component "eon.com/eby/asz/recherch/util" is to be CHANGED by this activation.
 1 component to be build in compartment "eon.com_EON_EBY_ASZ_R_1"
Analyse activities... finished at 2005-09-30 12:53:01.574 GMT and took 1 s 402 ms
Calculate all combinations of components and variants to be built...
 "eon.com/eby/asz/recherch/util" variant "default"
Prepare build environment in the file system... started at 2005-09-30 12:53:02.173 GMT
 Synchronize development configuration... finished at 2005-09-30 12:53:02.176 GMT and took 2 ms
 Synchronize component definitions... finished at 2005-09-30 12:53:02.274 GMT and took 97 ms
 Synchronize sources...
12:53:06.831 SYNC (FAILED: Failed to create/open file:
/usr/sap/D16/JC00/j2ee/cluster/server1/temp/CBS/39/.CACHE/228/DCs/eon.com/eby/asz/recherch/util/_comp/src/packages/de/isenergy/eby/zaehlerwesen/recherche/util/UtilComp.wdcontroller
(Permission denied)) UtilComp.wdcontroller (/usr/sap/D16/JC00/j2ee/cluster/server1/temp/CBS/39/.CACHE/228/DCs/eon.com/eby/asz/recherch/util/_comp/src/packages/de/isenergy/eby/zaehlerwesen/recherche/util/UtilComp.wdcontroller)
Prepare build environment in the file system... finished at 2005-09-30 12:53:08.555 GMT and took 6 s 382 ms
===== Pre-Processing ===== finished at 2005-09-30 12:53:08.560 GMT and took 8 s 411 ms
Change request state from PROCESSING to FAILED
ERROR! The following problem(s) occurred during request processing:
ERROR! The following error occurred during request processing:Failed to synchronize
/usr/sap/D16/JC00/j2ee/cluster/server1/temp/CBS/39/.CACHE/228/DCs/eon.com/eby/asz/recherch/util/_comp/src/packages
REQUEST PROCESSING finished at 2005-09-30 12:53:08.563 GMT and took 8 s 489 ms
Thanks for any hint
Helmut

Hi Sidharth,
good to hear that we are not the only company with this problem.
We also do have this problem since months, from SP9 to SP11.
First we thought that it would have been a CBS configuration or an OS problem but this cannot be the reason because as you already mentioned it works after serveral attempts. We also analysed the temporary CBS folders and noticed that only one file (the one that causes the error) does have other attributes than the others.
That sounds very strange and I hope that someone from SAP will read this task.
At the moment we are collecting all the problems and errors that appear with the JDI and the Netweaver Developeer Studio to present SAP this list in bulk. We cannot write an OSS note for every error we discover as suggested by SAP.
Stability mainly of the NWDS plugins is the biggest problem we have at the moment. Did you make the same experience?
Regards
Helmut

FTP - Permission Denied

Similar Messages

Maybe you are looking for