FTP Permission

Dear Friends
we have a windows server 2008 R2 that installed FTP Site in the IIS and Assign some files and folders to this FTP Site. when we want set permission to it for user access , only we have read and write permission in IIS for users. if we set Read permission
on the IIS for a user therefore user cannot copy and move files. we want set permisiion to users that when access to my FTP data can copy and move data and read data but cannot delete the data.
any body here that help me? please help me
thank you

Hi Hossein Zafari,
Are you trying to assistance with the Permissions on the File wherein they can be modified & saved by the users however they should not be able to delete the files, this
is not possible realize and not supported.
More information:
File and Folder Permissions
http://technet.microsoft.com/en-us/library/bb727008.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

FTP - Permission Denied

Can anyone help. I have recently set up file sharing on a Mac server. I have set both my internal hard drive and external hard drive as share points. I can navigate the external one fine but when I try and navigate the internal one I get the error:
NOOP
200 NOOP command successful.
CWD /OS X/Applications
550 /OS X/Applications: Permission denied.
Can anyone help?

>
pawan kumar wrote:
i m getting output XML file in my system.but i tried with directly one to one mapping in message mapping, now i did some modification in Message mapping like i concatenate name by X in message mapping and in description i passed ZSUBHODIP as constant then in output i am not getting concatenateed value and constant ZSUBHODIP in name and description.
Hi,
Did you activate the message mapping after modification ??
If yes, test the mapping in test tab and let us know the exact error.
Regards,
Chandra

Assign file permissions dynamically through FTP adapter

In my composite, i have a requirement to assign the file permissions dynamically.
I know the static way of doing it is to use the property 'Permission' in the jca file of the ftp adapter.
Is there any way to pass the value to this property dynamically?
I tried using jca.ftp.Permission. but not working.
Any help on this is much appreciated.
Thanks,
Naveen Kumar T.

Hi,
The document with the properties is this... It doesn't mention any properties for permissions though...
http://docs.oracle.com/cd/E25178_01/integration.1111/e10231/adptr_propertys.htm#CHDJBDHC
Cheers,
Vlad

Dreamweaver CC - FTP problem to access

I´m having some problems to upload files with my Dreamweaver CC.
Every time I try to upload something to the root of my FTP, I get an error message, meanwhile I try to upload to a sub-folder I don`t get any.
You may think that it's a FTP permission issue, but I have check with my provider, made some test and it seems that there is not the problem.
But more strange is that I also have Adobe CS5, and with this one I can upload my files to root without any problem. I have checked both configurations and they are exactly the same (obviously same host, user, pass… etc.).
Do you have any idea where could I have the problem?
Thank you very much for your support

Hi. Is there any progress in solving this problem?
The error message:
The path inside Xcode:
The SDKs for 7.1 and 7.0 were installed/added from the option Xcode> Preferences> Downloads.

File to ABAP proxy as attachment

Hello PI expert,
I have requirement to FTP file from FTP server to ECC server. But because of some security, we can not get FTP permission on ECC server.
What i want to do is, get the file from FTP server as it is, and send it using abap proxy as attachment. I don't want to do any content conversion or xml conversion because I want to transfer file as it is.
Any suggestion.
Thanks,

Hi,
if your PI version is at least "SAP NetWeaver PI 7.1 SP3"
create sample Data type structure with one node and one field, and use this for both proxy and file service/message interfaces.
Pick the file from FTP. No graphical mapping. Use Java Mapping. Read the input stream and create an attachement from this and attach it to the message. pass some static values for the output (proxy) structure using output stream. Thats all.
http://help.sap.com/javadocs/pi/SP3/xpi/index.html
Methods:-
com.sap.aii.mapping.api --> OutputAttachments --> create(String contentId, byte[] content) / create(String contentId, String contentType, byte[] content)

Two message in different files widout help of UTL_FILE

Hi All..happy new year in advance..!
I am in a strange scenerio by my client.I am having below type of code in which I am writing log via
"dbms_output.put_line" but he needs that whenevr any error came into code eror message should be written in separate file but due to some ftp permission we cant use UTL_FILE option.
kind ly give me any idea,i hav done much r&d..help..!
spool msg_log.log
declare
raise_pc1 exception;
raise_pc2 exception;
begin
dbms_output.put_line('hi..this msg is from code block.');
raise raise_pc1;
exception
when raise_pc1 then
dbms_output.put_line('hi..this msg is from exception block.');
end;
spool off
exit;
o/p is- hi..this msg is from code block.
hi..this msg is from exception block.
above o/p is coming in same log file.
I need that 1st line should be in 1 file(ex-msg_log.log) &
2nd eror line should be in 2nd log file (ex-error_log.log)
rgds,
pc

Hi AP,
In this case everytime, when I will get exception in any step only 1 message will print bcoz my_stat = 1 for every exception & in 2nd block we have same 1 line to print.Kindly look ionto it also ..
var my_stat NUMBER;
SET SERVEROUTPUT ON
spool msg_log.log;
declare
     raise_pc1 exception;
     raise_pc2 exception;
begin
     dbms_output.put_line('hi..this msg is from code block.');
     begin
          dbms_output.put_line('hi..raised raise_pc1.');
          raise raise_pc1;
     exception
          when raise_pc1 then
          :my_stat := 1;
     end;
     begin
          dbms_output.put_line('hi..raised raise_pc2.');
          raise raise_pc2;
     exception
          when raise_pc2 then
          :my_stat := 1;
     end;
end;
spool off;
spool err_log.log;
begin
     if (:my_stat = 1) THEN
          dbms_output.put_line('hi..this msg is from exception block.'||sqlerrm);
     end if;
end;
spool off;
exit;
& o/p is --
hi..this msg is from exception block.ORA-0000: normal, successful completion
PL/SQL procedure successfully completed.
here I am getting only 1 line in o/p even 2 exception had raised..
rgds,
pc

FTP exception: Can't open passive connection: Permission Denied

I have a File sender adapter, with FTP as transport protocol.
The adapter polls a directory each 60 seconds.
All works perfectly but <b>sometimes</b> I get the following error :
Channel CC_GBL_FlatFileSender: Error connecting to ftp server ...: com.sap.aii.adapter.file.ftp.FTPEx: 425 Can't open passive connection: Permission denied.
And 60 seconds after, no more error.
Any idee of why I get this error occasionally ?
In the sender file adapte, data connection is set to Passive. Do I have to set it to Active ?
Thanks in advance,
Laurence

Hi
Data Connection
- Active
In active mode, the server establishes a data connection from its data port, port 20, to an end point chosen by the client.
- Passive
In passive mode, the client establishes a data connection to the port required by the server.
The default setting is a passive data connection. Only change this setting if you have a specific reason. This is what is recommended by SAP.
It is possible that Passive FTP mode may terminate session.
In this mode the server "listen" on a data port (which is not its default data port) and to wait for a connection rather than initiate one upon receipt of a transfer command. The response to this command includes the host and port address this server is listening on.
In the FTP protocol two ports are normally used, 20 and 21.
Port 21 is the control channel in which requests such as PUT, GET, and PWD are sent to the server.
Port 20 is the data channel in which actual files, folders and directory
listings are sent.
Normally, when you connect to an FTP site, the site establishes the data
connection to your PC (the client) on Port 20. However, if the site allows
passive transfers, you can have your PC establish the data connection. It is
recommended that you use passive mode for most transfers.
Regards
Sumit Jain
**Reward with points if you find it useful.

How to set file permission using Oracle FTP Adapter

Hi,
I am using Oracle SOA Suite 11.1.1.4. I am trying to put a file using Oracle FTP adapter on unix box. The file that gets written to target system has file permission as RW/R/R. But this is a legacy system, and for them to consume this file - they expect the file permission to be RW/RW/R.
They have set the .profile with the required permissions for the ftp user account that we are using. But still when my BPEL process writes a file to unix box through ftp adapter, the file permission is RW/R/R.
Is there any way to control file permissions while writing files using ftp adapter? Any help would be highly appreciated.

907597 wrote:
But these setting needs to be done on unix server. Yes, that's the way to go... There's no config for that on FtpAdapter as far as I know...
This setting will enable the same configurations for all other ftp accounts on the server, which doesnt sound correct. Any other way of doing this? Or can this be done only for one ftp account?You have to check if your ftp server is capable of having different umask for different ftp users... I believe most do not...
http://h30499.www3.hp.com/t5/System-Administration/Setting-FTP-umask-per-user/td-p/2590101#.UMZ0TeEe7ng
Cheers,
Vlad

PERMISSION DENIED IN FTP SERVER

Hi all,
i have XML to XML scenario. i have put xi_input.xml in my system and made delete mode in sender communication channel. but its not picking and deleting the data, its giving error in FTP serve as "permission denied" and in runtime work bench error is "Failed to delete file 'xi_input.txt' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Permission denied'. For details, contact your FTP server vendor.". please help me
thanks and regards

>
pawan kumar wrote:
i m getting output XML file in my system.but i tried with directly one to one mapping in message mapping, now i did some modification in Message mapping like i concatenate name by X in message mapping and in description i passed ZSUBHODIP as constant then in output i am not getting concatenateed value and constant ZSUBHODIP in name and description.
Hi,
Did you activate the message mapping after modification ??
If yes, test the mapping in test tab and let us know the exact error.
Regards,
Chandra

Changing oracle file permission with ftp / sql

Hi, i have a question:
I've configure webdav to browse my /i folder.
I can use as well filezilla, connecting with hostname / uname: system / pass / myoraclesystem pass.
Is there a way to change file permission attributes with ftp?
Thank you

Hi,
Check out ORDSYS.ORDImage type from Oracle Intermedia, and especially its "process" method.
It possesses various commands to change image properties.
HTH.

How do i fix this: error message- index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the ser

that is...
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
index.html
thanks!

It's under More Options triangle in the Manage Sites panel. See screenshot:
Nancy O.

FTP - No permission to take action

OS Version: Mac OS X Server 10.4.8
I've been running FTP for a long time on this server and all of a sudden with no updates or change I can't FTP files to it anymore. The error I get in FETCH is "Error: the server does not believe you have permission to take that action."
I've fixed permissions, restarted to FTP service and even restarted the server? I tried connecting with other computers with different FTP programs and still get errors. I checked the acccess in Server Admin and Workgroup Manager and all seems to have the correct configuration.
What do I do next to try and trouble shoot this. Thank you for all your help in advance.

Hello Bart,
If you check the section 2.2 of Post Installation Guide for SLD this issue will become clear to you. Please check page 9 onwards. LcrAdministrator sould have all administrative tasks and in nutsahell should include all other roles. So just include all other roles and SAP will take care itself. I have checked in my Netwaver 2004s and I also could not find UME action com.sap.lcr.LcrAdministrator. But my SLD is working fine. I guess it like assigning SAP_ALL to users in ABAP engine but still you will be controlling the access to the users.
However you can also go for a tighter approach and restrict authorizations to the user J2EE_ADMIN. This would be infact even better than first approach however the ultimate decision lies with you.
Please award points if you found the answer useful.
Regards.
Ruchit.

FTP Then Access Denied. Can't save or open the file. Also don't have permission

I am going insane. When FTP'ing files from Dreamweaver to our
hosting server, it sends the file but from that point on, if I
attempt to open or save the file, I get this error message:
quote:
Access to
C:\Users\admin\Desktop\listcombo\Stylevantage1-0\index.html was
denied
Also, when I try to save after I have successfully FTP'd a
file, I get an error message saying I don't have permission to view
a file when I'm the one that made the file! It's so annoying! I
have Windows Vista and think that might have something to do with
it.
When I FTP a file to my server, close the file in Dreamweaver
8, then attempt to open it and get that "Access Denied" message as
I stated above, it seems like the only way to open the file is to
FTP the file BACK from my server to my computer. THEN it opens up.
Also, when I'm trying to save a file, say the index, I get a
message that has to do with cannot save file mfcesbi.tmp when I'm
trying to save the index... NOT mfcesbi.tmp. What's that about
anyways?
Also, I've done the whole "Right click Dreamweaver and set
permissions on the security tab" thing. Every possible permission
that I can check is checked to "allow" so that's not the problem.

Who is your host?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dreamweaver_is_c_r_a_p" <[email protected]>
wrote in message
news:g757vk$g5j$[email protected]..
> Also, a new error message I get when trying to open the
index page:
>
>
quote:
Index You don't have permission to open this file. Contact
the file
> owner
> or an administrator to obtain permission.
>
> What am I supposed to do? Give myself a call up on the
phone and ask
> myself
> if I can view my page I created!!?!? COME ON!
>

FTP with upload permission

Hi to all,
I need to start an ftp server and create an user with upload/download permission on this ftp.
I have started the service with
#/usr/sbin/in.ftpd -a -S
#/usr/sbin/ftpdconfig /jack/myftp #set the root directory
The login with root account is disable. The other user are not allowed to upload/download.
I am using OpenSolaris 2009.06.
How I can create an user with upload/download permission?
Thanks in advice.
Manuel

Solved. Just modified the ftpuser.

Change in file permission in ftp adapter

Hi All,
I am facing a problem in ftp adapter. I have a text file with 777 permissions when i am moving the file with ftp adapter(FTPMove operation to another folder file permissions are getting changed to 644. But if i move the file using command prompt permissions are same. The server is unix machine.
Can anyone plz tell me that how the files can be moved with same permissions using ftp adapter. i m using jdeveloper11.1.1.4.0. and soa11g.
Thanks in advance,
Sourbh

Actually i use File Zilla client for file move and my question is that Is there a way that ftp adapter dont change file permissions while moving a file from one directory to another directory.

FTP Permission

Similar Messages

Maybe you are looking for