FTP problem with korean language name .htm
HI expert,
I try to transport file is korean name using FTP in ERP system but FTP did not work.
English name is good but korean name is not.
I suspect one thing that I can not see korean name file in t-code AL11.
there is error message
===============================================
Error Message readdir: Invalid wide character
===============================================
please any help.
thanks.
Hi Juan,
the file name must compose korean and english.
the file type is html.
how can I transport the file using FTP.
thanks
Similar Messages
-
I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
JohnI have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John -
Problem with Connection Broker name
Hi,
When i change the connection broker name using for example:
Set-RDClientAccessName -ConnectionBroker serverbrokerName.domain.com -ClientAccessName NewBrokerName.domain.com
no.manchete.pt
And setup a DNS pointing to NewBrokerName.domain.com
When someone tries to connect it gives him the following error:
"Your computer cannot connect to the remote computer because the Connection Broker couldn't validate the settings specified in your RDP file. Contact your network administrator for assistance".
What am i doing wrong?
Sincerely,
AMHi,
When i change the connection broker name using for example:
Set-RDClientAccessName -ConnectionBroker serverbrokerName.domain.com -ClientAccessName NewBrokerName.domain.com
no.manchete.pt
And setup a DNS pointing to NewBrokerName.domain.com
When someone tries to connect it gives him the following error:
"Your computer cannot connect to the remote computer because the Connection Broker couldn't validate the settings specified in your RDP file. Contact your network administrator for assistance".
What am i doing wrong?
Sincerely,
AM
The services needed to be restarted, now im facing another problem with the new name:
error: "Remote Desktop can't connect to the remote computer "NewBrokerName.domain.com" for one of these reasons:
1) Your user account is not listed in the RD Gateway's permission list.
2) You might have specified the remote computer in NetBIOS format ( for example, computer1), but the RD Gateway"
EDIT: Also solved this error RD Gateway was only allowing connections to Domain Computers, change to all resources -
Having problem with change of name in the datagrid Coding
I am having problem with changing the name of the datagrid header text name for one of the data either in the flash file or the php file.
The thing is i want to change the Course_Name to Course Name that has no underscore so that it will look nicer in the datagrid but if I change it in the php file like SELECT Course_Name as 'Course Name' ....., it will not turn out in the datagrid when I CTRL ENTER the flash file but the others like Price,description and display is shown.
There is no problem with my php code but I do not know how to change the Course_Name into Course Name so please help me resolve this error that I am having.
This is my flash code
function goCourse(e : MouseEvent):void
gotoAndStop(5);
refreshResponder = new Responder (refreshSuccess, onFault);
connection = new NetConnection ();
connection.connect (gateway);
dataDG.addEventListener (Event.CHANGE, gridItemSelected);
refreshData (true);
function gridItemSelected (e: Event): void {
ID = e.target.selectedItem.ID;
courseTxt.text = e.target.selectedItem.Course_Name;
priceTxt.text = e.target.selectedItem.Price;
descTxt.text = e.target.selectedItem.Description;
private function getParams () {
var param: Object = new Object ();
param.ID = ID;
param.Course_Name = courseTxt.text;
param.Price = priceTxt.text;
param.Description = descTxt.text;
return param;
private function refreshData (refresh: Boolean): void {
if (refresh)
connection.call ("Course.viewCourse", refreshResponder);
private function refreshSuccess (result: Object): void {
dataDG.dataProvider = RecordSetDP.toDataProvider (result);
dataDG.columns = ["Course_Name","Price","Description","Display"];
private function onFault (fault: Object): void {
trace (String (fault.description));
This is my php file code.
function viewCourse()
$this->connect();
$sql = "SELECT Course_Name,Price,Description,Display
FROM coursetb";
return mysql_query($sql,$this->_connection);i don't see where you're calling your php file in your code, but change 'Course Name' to 'Course_Name' (or vice-versa) there.
-
Problem with "farsi" language . Characters is separate.
android 2.2 . samsung galaxy s i9000 . problem with "farsi" language . Characters is separate. like this :.
. س ل ا م . ا ی ن ج و ر ی .
please help.fennec-4.0b2.multi.eabi-arm
-
Problems with song's names in iTunes Store
So, I have a problem with song's names in iTunes Store on my iPhone 6+ 128. with 8.2
You can see it on attached screens.
I tried to change the font size and erase the phone and then install it again by default. The problem manifests itself on 6+ and didn't on my iPad with the same program version.That's really curious. Sorry I don't have anything else by way of potential solutions to offer, but it may be worth contacting Apple about this one.
http://www.apple.com/support/contact/ -
Flash Player 9 problem with Chinese language
Flash Player 9 problem with Chinese language
I have developed a course in flash which goes in to different
languages like Spanish, Chinese, Portuguese, Japanese...
I have used flash for developing the course. I have tested it
for Chinese It looks great on flash player 6,7 and 8 but I am
shocked to see that it give some garbage value in flash player 9.
Don’t know this is a bug of player or what?
Flash Player 9 Problem
Flash Player 9 problem with Chinese language
Flash Player
9 problem with Chinese languageThanks for the helpful posting. I came searching here for advice because I could not get my Flash Player 9 installation to succeed using the trouble-shooting information provided on the Adobe web site, and from experience I have come to know that my best resource in trouble-shooting is to seek the help of other Mac users.
In following your instructions I discovered that "Enable Flash" was not checked in my preferences, so that was definitely part of the problem. However, I still could not get Flash Player 9 to work, so after doing a Google search I found a posting on Version Tracker (under feedback at the bottom of this page: http://www.versiontracker.com/dyn/moreinfo/macosx/11622 ) that provided the last little bit of instruction I needed to get Flash Player 9 to function properly.
Before attempting to install Flash Player 9 I had used Adobe's uninstaller to uninstall previous versions, as instructed on the Adobe website. However, AFTER repairing my disk permissions, I needed to restart the computer and run the uninstaller again. After uninstalling I restarted once more, ran the installer and, VOILA!, finally Flash Player 9 worked as it should.
PowerBook (1.5 GHz PowerPC G4) Mac OS X (10.4.8) -
I have a problem with other languages with Firefox 3.6.6 and Serverlight
I acquired the problem with other languages in Serverlight when I update my Firefox to 3.6.6
It seems that only English chart is working properly. I have WinXPprof and have no any other additionally added languages programs. But I use every day Cyrillic and Greek charts and they are working in others applications except on Serverlight. I do thank you for any coming help.
== This happened ==
Every time Firefox opened
== After updating my Firefox to 3.6.6. versionDo not reply to engineer. It is a phishing scam.
-
Extremely annoying problem with user folder name in windows 8.1
Here is the thing:
Friend of mine bought the laptop (very strong and expensive asus - republic of gamers) with installed windows 8.1 on it, but after a few days only I bought that computer from him because he didn't need it and he didn't use it at all!
But, his name stayed in the windows. I changed all user accounts names and everything which was possible to be changed, but when i go to C/users his name is still there on folder!
I can say it is very annoying because that laptop cost almost 3.000 USD and I still need to look at someone else's name in my user folder!
I tried to change "ProfileImagePath" in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ .... but after that windows logged in as a temporary profile and I spend another hour to figure out
how to reverse the thing!
How is possible that some so basic and simple things can't be changed at all in newest windows??? Only because some name was entered first it's not possible to be changed ever again???? Seriously?
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
I am extremely unhappy and upset with this operative system! I,m cursing the day when i gave so much money for computer with crap called windows 8.1!!!!
Very very angry!!!
(P.S English is not my native language)Hi,
According to your description, it seems that you have resolve that issue.
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
Please let us know what problem did you encounter? Please give us more detailed information in order to provide the further help.
Here is a overall guide for you to know well the Windows 8.1
Windows 8.1: frequently asked questions
No Karen, I didn't resolve the issue.
I asked very simple question how to change something so basic like user folder name in Windows 8.1
You know: "C:/Users/"user name"
All the links you are giving to me doesn't provide any concrete answer to this question. I spent hours and hours googling and researching about this question and only solution which i found is that i need to create completely new user account and delete completely
the old one, just to be able to remove an old name of user folder! Are you kidding me?
How is possible that such a basic thing is so complicated?
Is there any way to change folder user name in any other way because i don't want to create a new user account!
Simple question, but, like always, no any concrete answers - just some empty talks, and totally useless links and SPINNING IN THE CIRCLE all the time without the CONCRETE solution.
As for part of my post which you quoted, and your request for more informations in order to provide me further help, i just gave it to you again. I want to change user folder name. What you don't understand in that question?
UPDATE:
Ok, i came back to edit this post because i have a feeling that maybe you don't understand the question and giving me this link because maybe you simply don't know that when you go to:
Control panel/user accounts/change your account name... and change the name, and after that, when you go to C:/users, the folder with the user name still have an old user name. Which means that any changes in control panel or anywhere else doesn't make any
changes on C:/users/ folder itself!!!!!
In previous windows versions was possible to change it by editing "ProfileImagePath" in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ ....
But when I try to do that in Windows 8.1, when I reboot computer it logs in with some temporary account, so i need to reverse everything to be able to use computer with the real account!
So basically it seems that is absolutely impossible to change user folder name in Windows 8.1, which is simply unbelievable!
I really think i explained very good now. -
6125 - problem with music file names
Hi everyone,
I bought a Nokia 6125 last week and have a slight problem with the music player if anyone can help please:
The music files that I have transferred to my phone have the correct song and artist name on the memory card in the Gallery, but when I open up Music Player it just displays them as squares. Any ideas on how to solve this please?
Thanks,
Sammy_JJHi,
the problem might occur, because of language versions are different(source and your phone). Or the filename coding is not supported in the phone. -
FTP Problems with Dreamweaver 8
The webmaster for the library I work for recently had
difficulty with her computer. She did a system restore from her
discs, and, after that, reinstalled Dreamweaver 8. She sent me an
email to let me know she needed my assistance setting her DW FTP
back up.
While her computer was down I decided to reorganize the
website files. There were dozens of old files and most of the
images and html were scattered throught the main part of the file
tree. She really liked the changes, but, after connecting her to
the site and downloading all the files, a problem arose.
Once she got her laptop back home every time she'd connect to
the FTP she got a group of folders named "Windows, Linux,
Speedtest" and a few others. I contacted our webhost and they told
me this meant she was logging in anonymously. We have our login
name and password in correctly, though, so this shouldn't happen.
No one at our ISP could help me do to them not being familiar with
Dreamweaver.
After playing around with the machine a bit I found that if I
deleted the site from the FTP and re-did it using the same folders
then the first connection was succesful. But, after disconnecting,
the same problem happens again.
I found this article and wondered if it could be causing our
problem.
http://kb.adobe.com/selfservice/viewContent.do?externalId=3491671c
The only thing that makes me think it might not be is the
fact that our login and password stays in the box, but, for some
reason, the FTP is connecting anonymously. Could her doing a
recovery have led to this? Maybe there's an update she needs to
apply that she didn't get after doing the recovery?It's hard to know what kind of things happened with your
moving stuff around
outside of DW.
Suffice it to say that most FTP problems are router/firewall
related. Does
this help at all?
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"WesleyThomas" <[email protected]> wrote in
message
news:[email protected]...
> The webmaster for the library I work for recently had
difficulty with her
> computer. She did a system restore from her discs, and,
after that,
> reinstalled
> Dreamweaver 8. She sent me an email to let me know she
needed my
> assistance
> setting her DW FTP back up.
>
> While her computer was down I decided to reorganize the
website files.
> There
> were dozens of old files and most of the images and html
were scattered
> throught the main part of the file tree. She really
liked the changes,
> but,
> after connecting her to the site and downloading all the
files, a problem
> arose.
>
> Once she got her laptop back home every time she'd
connect to the FTP she
> got
> a group of folders named "Windows, Linux, Speedtest" and
a few others. I
> contacted our webhost and they told me this meant she
was logging in
> anonymously. We have our login name and password in
correctly, though, so
> this
> shouldn't happen. No one at our ISP could help me do to
them not being
> familiar
> with Dreamweaver.
>
> After playing around with the machine a bit I found that
if I deleted the
> site
> from the FTP and re-did it using the same folders then
the first
> connection was
> succesful. But, after disconnecting, the same problem
happens again.
>
> I found this article and wondered if it could be causing
our problem.
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=3491671c
>
> The only thing that makes me think it might not be is
the fact that our
> login
> and password stays in the box, but, for some reason, the
FTP is connecting
> anonymously. Could her doing a recovery have led to
this? Maybe there's an
> update she needs to apply that she didn't get after
doing the recovery?
> -
FTP problems with CS5 - Help please
I volunteer helping charity and education organisations with their websites. One of my clients has just bought CS5 - I personally am still working on CS3 - so when I went to help them download their site first of all the set-up was quite different (why do companies fix things that aren't broken), but I got over that issue and managed to connect to the site, download and make a couple of changes. All was well!
Two days later I went back, because they were having problems and I couldn't connect to the server.... Well, when I was on the main Dreamweaver screen the computer said it was connecting and made all the right moves uploading files etc, but nothing on the website changed, so goodness knows where the files were going. When I went onto the screen showing local and remote files, on the server side there was just a message saying you can't upload unless you set up a control version and the little blue plug was just greyed out.
I don't want or need to set up a control version as it is just one person dealing with this site from one computer.
As this is the first time I have come across 'subversion' or SVN I am a little confused. I have sent an email to the hosting company to make sure it is not a problem with their server, but won't get a reply until Monday so I thought that over the week-end I would just ask all you out there....
Help!!DW is more than capable of managing your FTP tasks on its own. Please tell us - when you connect to the remote site and then LOOK at the Remote side of the Files panel, what FOLDER names do you see? As an ancillary question, what do you have in the Root Directory field of the Remote site definition?
-
Problem with NFSv4 Domain name
Hi,
I am creating zones for the first time.
I am having problem with the NFSv4 domain name prompt.
I followed the instructions described in
http://opensolaris.org/os/community/zones/faq/#cfg_sysidcfg
After the installation of the zone, on zonepath/root/etc, I created a sysidcfg file and did
touch *.*NFS4inst_state.domain
Booted the zone and logged in to the zone console.
The sysidcfg worked as expected but the NFSv4 prompt didn't go away:
─ NFSv4 Domain Name ────────────────────────────────────────────────────────────
NFS version 4 uses a domain name that is automatically derived from the
system's naming services. The derived domain name is sufficient for most
configurations. In a few cases, mounts that cross domain boundaries might
cause files to appear to be owned by "nobody" due to the lack of a common
domain name.
The current NFSv4 default domain is: "xx.xx.xx"
NFSv4 Domain Configuration
──────────────────────────────────────────────
[X] Use the NFSv4 domain derived by the system
[ ] Specify a different NFSv4 domain
────────────────────────────────────────────────────────────────────────────────
F2_Continue F6_HelpWhat is missing?
I am running
$ more /etc/release
Solaris 10 11/06 s10s_u3wos_10 SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 14 November 2006
$Thanks in advanceHi
Can you please confirm that there is no “Create A records” option under “More Actions” ? -
Planning problems with russian language during refresh application
Hello all ))
I have problems with Planning during refresh my Application with Essbase.
I intsalled Essbase on RHEL4 and set ESSLANG=Russian_Russia.ISO-8859-5@Default also I set locale on ru_RU.iso88595
Ater that I installed Planning on Solaris 9 which uses Oracle RDBMS with NLS_CHARACTERSET=AL32UTF8 and set locale on server to ru_RU.iso88595
Now I can create dementions, members on russion language in Essbase without problems also I can create dementions,members,etc on russian language in Planning. But if I create demention or member in Planning on Russian languge and ) try refresh my Application with Essbase I give follow error
"=====(HspCubeCreation.java)sQueryString:?Application=Test1
com.hyperion.planning.olap.EssbaseException: (1060010)
at com.hyperion.planning.olap.HspEssbaseOutlineAPI.EssAddMemberEx(Native Method)
at com.hyperion.planning.olap.HspCubeRefreshTask.addChildren(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.addMembers(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.addDimensionsAndMembers(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.buildOutlines(Unknown Source)
at com.hyperion.planning.olap.HspCubeRefreshTask.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)"
Why it's happened?
Please anybody help mesince march 5 we are on planning 9.3.1.1 and also having problems with refreshing:
com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
at com.hyperion.planning.HspJSImpl.lockApp(I)V(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.lockApp()V(Unknown Source)
at HspSecurityFilter.Handle(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
at HspSecurityFilter.doPost(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3150)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
at com.hyperion.planning.olap.HspCubeRefreshTask.run()V(Unknown Source)
at java.lang.Thread.run()V(Unknown Source)
anyone a idea? -
Problems with Spanish language
Hello!
i'm connecting my DB with PHP, my problem comes when i try to capture ñ's or accents (á, é, í, ó, ú ). When i capture these character from my APEX they appear:
20 fátima 20
But, when i insert info from PHP the characters don't appear:
15 f�tima 20
My NLS_CHARACTERSET value on Oracle is AL32UTF8 and
select * from nls_session_parameters;
NLS_LANGUAGE MEXICAN SPANISH
NLS_TERRITORY MEXICO
NLS_CURRENCY $
NLS_ISO_CURRENCY MEXICO
NLS_NUMERIC_CHARACTERS .,
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD/MM/RR
NLS_DATE_LANGUAGE MEXICAN SPANISH
NLS_SORT WEST_EUROPEAN
NLS_TIME_FORMAT HH24:MI:SSXFF
NLS_TIMESTAMP_FORMAT DD/MM/RR HH24:MI:SSXFF
NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR
NLS_TIMESTAMP_TZ_FORMAT DD/MM/RR HH24:MI:SSXFF TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
select * from nls_instance_parameters;
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_SORT -
NLS_DATE_LANGUAGE -
NLS_DATE_FORMAT -
NLS_CURRENCY -
NLS_NUMERIC_CHARACTERS -
NLS_ISO_CURRENCY -
NLS_CALENDAR -
NLS_TIME_FORMAT -
NLS_TIMESTAMP_FORMAT -
NLS_TIME_TZ_FORMAT -
NLS_TIMESTAMP_TZ_FORMAT -
NLS_DUAL_CURRENCY -
NLS_COMP -
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
select * from nls_database_parameters;
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AL32UTF8
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0
PHP has this sentence but it has ; (comment)
;default_charset = "iso-8859-1"
Is this problem of ORacle or PHP, and what should i change?
Thank u!Hi Rafael,
I'm sure my friend Paolo is correct (+5 points buddy)
I ran into this problem with the Swedish and German language files as well :(
Swedish;
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&topicID=.ee835d2&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cd33d55/0#selected_message
German;
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cd4047b/0#selected_message
Cheers!
Rob
Maybe you are looking for
-
Broken in Logic 9?: Reindex loops from external drive
Adding loops from an external drive in Logic 9 does not seem to work any longer. It used to work great in L8. Anyone have similar experiences? Know any work arounds? Is it a bug? If it's a bug I'll file it with Apple. Previously in Logic 8 it was eas
-
You can't open your current photo library using this version of iPhoto. I am using the current iPhoto and O/S 10.8.2
-
Open goods receipt and Services
Dear All, We can see the Open Goods Receipts thru WE101 selection parameter means in a PO,15 qty is there. for 10 qty,GR made and for remaining 5 qty,GR to be done which gets reflected in the report. For service, whether we have to go with value only
-
ITunes 11.0.5 crashes when accessing the store.
I just updated to iTunes 11.0.5 recently and whenever I try to access the store, it crashes. The loading bar gets about 90% loaded and then I recieve an "iTunes has stopped working" message form windows and am forced to close the program. I've tried
-
HI, I have one field on Selection screen It's name is ZTEXT. My requirement is it should take input upto 90 characters but the system is allowing max 45 characters only. I have tried like below. Select-options : Ztext for adr6-SMTP_ADDR. Here SMTP_AD