FTP Publish Service for LR 3

What really amazes me is the lack of an FTP Publish service alongside 'Hard Drive' and 'Flickr'. It seems so logical… am I missing something?

Been messing around trying to figure out how to using publishing services with FTP and finally got it, and it is Free and works greet.
What I did is used the free Macfusion for the Mac to mount my FTP server from GoDaddy like a HardDrive and then in LightRoom am now able to add publishing service to the new mounted FTP (HardDrive).  Just go in and select HardDrive and select specific folder and away you go.
I found this actually works better than the FTP publisher add-in that is out there.  One problem with the FTP publisher is that if I tried to make a change to an original picture, it would not allow me to republish it, I do not have this problem with my method, everything seems to work great.
Let me know if anyone else gets this working and what you think.

Similar Messages

  • Broken publish service for Flickr

    Hi,
    I tried to publish a set of photos on Flickr when something went wrong in LR 4.1 (on Win 7-64). 3 shots were uploaded successfully when LR suddently claimed that: "Can't upload this collection. Could not connect to the Flickr web service. Please check your internet connection." My Interent connection is fine and I can browse Flickr normally. I can also go into the publish service and re-authenticate my Flickr-account successfully. But the problem persists. I can create a new publish service for Flickr and that one works fine.
    So the settings for my first Flickr publish service seems to be broken somehow.
    1. Does someone know how to fix the broken publish service?
    2. Is there a way to move my shots in the broken publish service to the new one without breaking the link between the shot and the copy on Flickr?
    Thanks,
    Mike

    It's a bug http://feedback.photoshop.com/photoshop_family/topics/lightroom_4_1_rc2_a_cr_or_lf_n_the_m iddle_of_a_caption_causes_failure_to_connect_to_flickr
    You can vote to force adobe to resolv it.
    Maybe yoy have a cariage return in caption.
    Stéphane

  • Using Lightroom publish service for either Flickr or SmugMug. I have many images with a keyword Madd

    Using Lightroom publish service for either Flickr or SmugMug. I have many images with a keyword Maddy. This frequently doesn't show up in SmugMug or Flickr. All my other keywords seem to work fine. Anybody experience anything like this?

    You only get one opportunity to set up the hard drive under publish and the folder cannot be changed unless you get a plug-in to provide a work around.
    However you could just create a generic publish folder - something like Photo Lab, or Print Job.
    But you could then right click on your publish folder and select “make target collection” - you will see the plus sign added.
    Simply highlight the photos you want to print and press B (the same as adding to a quick collection) and your Publish Services folder on your hard drive will be populated with the exports.
    The real problem is that you would need to edit the publish settings every time you required different dimensions etc (not sure possible). I use a similar system, which works well and I like how I can see what has already been published and what is still to be published but my prints are always the same size and resolution.
     

  • FTP publish service

    A ftp pulbish service would be so cool! I know some plugins can do the trick but I'd like to have the feature without plugins. Publishing pictures directly to my website is more useful

    The only FTP Publish service I'm aware of is the plugin by Tim Armes. There was an FTP Export (not publish) service included in the SDK in LR2 but I can't recall if it is still in LR3's SDK. Publish Services are hard to maintain over the lifecycle of a product release (e.g. Facebook seems to change their API every other week) so I suspect there is a preference to publish the SDK and leave Publish Service development to others with shorter/lighter product update cycles.

  • Using a Publish Service for print service prep

    I'm just starting to work out a new way to prepare images for sending to a (consumer grade!) print service using a Publish service, and realized I should harness the power of this corner of the Lightroom community to see if my ideas are sound. Feel free to add comments or suggestions.
    Here's what I'm doing:
    - For each size and processing option (e.g., 5x7, Matte) create a hard drive Publish Service.
    Set options appropriately, such as:
    - Filename for clarity. I use custom name + orig file number. (There appears to be a small display bug, in that the example displayed will show the " dng.jpg")
    - Given what I've learned about Lr and JPEG compression, I reduce the quality to 80% or so for a nice quality/size balance. I don't want to have to muck with this too much.
    - My service does not have an ICC profile for me to use, but assure me that AdobeRGB is accepted by their equipment.  So that's what I'll use. (One day I'll try out a pro service that understands that a simple thing like an ICC profile makes us feel warm and fuzzy.)
    - Resizing to fit. I set to never enlarge (though it should never happen that I have to enlarge) and set the dimensions to whatever I need for this service: 5x7, 4x6 &etc. Hints on optimal dimensions for getting nice borderless prints of a certain size accepted! I know that not all dimensions are created equal.
    - I'll assume that the default resolution is fine, but I ought to do my research for when to modify this when I get into 8x10 or larger formats.
    - Sharpening for print and paper type for this publish service.
    - My service has no reasonable file size limitations, so I just let the exported files get created at any size.
    - I minimize keywords.  Makes much smaller files because who needs keywords in prints? I have Metadata Wrangler, so I might insert that and have it leave in the minimal set of MD, like ICC profile and copyright info.
    So, given this, I can process my images as usual, make a number of crops (just to be a perfectionist) and then drag them to appropriate service where they end up in a hierarchy of folders ready for uploading.
    What am I missing?
    BTW, I'm not using the Print module because it was too tweaky trying to get it to make JPEGs that would print borderless.  Feel free to set me straight on that if you like.

    You only get one opportunity to set up the hard drive under publish and the folder cannot be changed unless you get a plug-in to provide a work around.
    However you could just create a generic publish folder - something like Photo Lab, or Print Job.
    But you could then right click on your publish folder and select “make target collection” - you will see the plus sign added.
    Simply highlight the photos you want to print and press B (the same as adding to a quick collection) and your Publish Services folder on your hard drive will be populated with the exports.
    The real problem is that you would need to edit the publish settings every time you required different dimensions etc (not sure possible). I use a similar system, which works well and I like how I can see what has already been published and what is still to be published but my prints are always the same size and resolution.
     

  • My LR 5.2 Publish service for Facebook indicates "missing plug-in."

    The Publish Service function on my LR 5.2 indicates that Facebook is "missing plug in." Downloading LR 5.3RC did not fix the issue. How and where can I find and install the missing plug-in?

    My apologies if you have already found this answer, but I didn't see it in the replies for this thread. 
    Here is an answer to your "pages" issues with the default Facebook plugin.  Check out Jeff Friedl's plugin...
    http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1686 557
    Here is his personal blog, from which he supplies a wealth of information and a variety of plugins for Lightroom (see "Lightroom Goodies")...
    http://regex.info/blog/
    I''m setting up my plugins from Jeff as "I speak."
    I hope this helps,
    Adam

  • Can't set up Lightroom Publish Services, internal error occurs

    I'm trying to use LR 3's publish service for SmugMug.  I'm a little scared since 
    I have a large number of photos to sync up.
    When I click on "setup" on the SmugMug export services, I get a popup 
    error with this message:
    "An internal error has occurred: ?:0: attempt to index field 'exportSettings' (a 
    nil value)"
    Any idea how to fix this?
    The same message appears for any of the publish services (Flickr, Facebook).
    If I go the Publish manager, I can authorize the SmugMug account.  It then says it syncs the hierarchy, but afterwards nothing seems to have happened and the account is not longer authorized.
    Thanks.

    Thanks Mark, but that's not it.
    I'm not using Jeff's plugin, but the new built-in one for LR 3.2 and LR3.3.  I did try to install Jeff's plugin just before LR3.2 came out.  I uninstalled Jeff's version (or at least tried to - it doesn't appear anymore) before I ever used it.
    I'm not even to the point of exporting to SmugMug, I just click 'setup' and get the error.

  • Lightroom publish service Revel making albums

    In Lightroom publish services for Adobe Revel, there are no options for creating indivisual albums in a Library. The only option is to create a new Library. This not helpful.
    Is there a way?

    It does publish jpeg copies. Does not create any derivatives in the catalog.

  • Different Export / Publish Dialog for combined Export/Publish Service Provider

    Hi,
    I'm writing a Export/Publish Service Provider that supports Publish and Export (supportsIncrementalPublish= true). So, there is only on sectionsForBottomOfDialog() which is used for both Export and Publish. This is nice since most of the setting options should obviously be identical for Export and Publish. A few settings though are only required by the Publish Provider. To keep the Export dialog as simple as possible I would like to hide the Publish specific settings when called via "Export".
    Is there a way to identify whether the dialog was opened via "Publish" or "Export" so that I could hide some of the elements in the first case?
    Martin

    Excellent! Totally right! Here's what I found on p.70:
              LR_isExportForPublish Boolean, read-only.
             True when the current export operation is part of a publish service, either currently running or being edited in the Publishing Manager.
    RTFM!!
    Exactly, what I was looking for!
    Thanks for opening my eyes...
    :-) Martin

  • Pleased with upgrade even just for single site FTP publishing

    I liked iWeb 08 a lot, but found the publishing of EVERYTHING really cumbersome. So I decided to take a chance and upgrade to iWeb 09 and it seems perfect for the sorts of things I am doing now. I love the fact that I can select one site and then have it FTP publish to just the directory I want at my hostgator ISP (I don't use Mobile Me).
    It seems to work just fine, and is a great time saver of the way publishing was done in iWeb 08. Just this feature was worth the upgrade to me.
    doug

    I'm thinking about this as well. My work-around for iWeb'08 was to create a copy of my original .sites2 file with all the sites, rename the file to xxx.sites2, open it and delete all but 1 site in iWeb. Repeat with all the sites, and then you have a bunch of files each with only 1 site. Create an alias for each file and you have more or less the same thing.
    Message was edited by: Brad Cantos
    Message was edited by: Brad Cantos

  • The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

    When i tried to login in inbrowserediting.adobe.com i see that:
    The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
    What does it mean? What is problem?

    Hi,
    I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
    its saying the following
    "The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
    Yet i Can access my website fine "www.calmwood.com.au"
    My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
    so i am not understanding how it thinks its different. when its fully referenced
    any help would be appreciated.
    thanks

  • Need advice for starting a Managed Cloud Service for Small Businesses

    I hope this is in the right forum.  I have done a lot of research and searching but havent found anything that specifically answers, in total, what I am wanting to accomplish.  I live in a small town and want to start a Managed Cloud Services for
    small to small-medium business in my area (2-30 users for each business).  I want to market this to have businesses replace their in-house server(s) to virtual ones I would host in a local Data Center with my own equipment that I would maintain.  I
    am just starting off so I don't have any clients I do this for currently, but I get asked about this frequently.  I want to run a 2012 R2 Domain Controller and a Hyper-V 2012 R2 server.  The virtual servers I will host are going to be for AD, RDS,
    FTP, and files.  Software examples that people are going to be using these virtual servers for are Quickbooks, Sage Accounting, Remote Desktop or RemoteApp, custom CRM or small database software, Office 2013, etc.  No Exchange currently but will
    probably configure something for that in the future (maybe run 1-3 virtually for now if someone asks, but will only do it if the user base is fairly small ~under 10 users).  I only have 1 static IP to work with over a 100Mbps connection up and down.
    For hardware, I am figuring something along the lines of this:
    (1) 1U, single CPU w/2-4 cores, 8GB, 2x73GB SAS 10k RAID 1, Dual PSU, running Windows Server 2012 R2
    Domain Controller
    (1) 2U, 2x 8-core Xeon ~2.6Ghz, 80GB RAM, 8x600GB SAS 15k in Raid 10 for Storage (VHDX files, etc), RAID 1 small Basic drives (or USB stick) for OS, Dual PSU, Quad GB Nic which I can use for load balancing/teaming, Hyper-V
    2012 R2
    Hyper-V Virtual Server
    (1) GB Unmanaged Network Switch & (1) Cisco 5510 Firewall
    Most of my questions are about the best way to configure this.  I am planning on managing my Hyper-V from the physical Domain Controller server.  Each virtual server will have RDS & (possibly) AD services on a single server.
    1) I want to replicate the physical Domain Controller.  Should I get another server or just virtualize the replica in Hyper-V?  I understand that if the Hyper-V goes down, so does my DC replica.
    2) Should I use my Domain Controller to manage ALL users on each virtual Server, by creating separate Organizational Units for each business?
    3) Should I setup my domain controller with Hyper-V management and then each Virtual Server I setup be a separate domain (Ex. mydomain.local, business1.local, business2.local, etc)?  Each one has no connection to any
    other, completely seperate.  Or should I do subdomains (business1.mydomain.local).
    4) What I have read is that Subdomains are a pain to manage with user rights, etc.  I want to keep each server complete separated from one another over a network connection, I suppose the VLan through Hyper-V options
    do this?  I dont want wondering users to stumble upon another businesses files (I know they would probably be prompted with a login for that business/domain).
    5) For each virtual server, I want to create and have an HTTP subdomain point to that server from my domain name. (Ex: business1.mydomain.com, business2.mydomain.com, etc.)  I want them to be able to have access to
    only their RemoteApps or be able to type that address in their Remote Desktop program as the host name.  This would be for viewing the RemoteApp login page and RemoteApps for that business over HTTP/S through a browser.
    6) If I do not have separate DC's in each virtual and my main DC manages each one, is their a way to connect up each companies RemoteApps using a single site that only shows what they are assigned to based upon their login?
    (Ex. http://login.mydomain.com which then shows that user what they are assigned on their own virtual server)
    7) Since each business will use the same ports for RemoteApp (443) & RDC (3389 unless I change it), how would I setup the subdomains to point to their correct server and not overlap for mess with any of the other servers
    since its all over 1 static WAN IP for all servers.  Thats why I figured setting up IIS subdomains would solve this.
    8) For backups or Hyper-V replication, is it better to have software that backs up the ENTIRE Hyper-V server (Acronis Advanced Backup for Hyper-V) as well as replication or just backups?  Or should I do separate file
    backup on each virtual with a replica?  Can a replica be a slower server since its just a backup? (Ex. 1x 8 core, 80GB, 8x600GB 10k SAS)
    9) For the servers that will be using FTP, can I again rely on the subdomains to determine which server to connect to on port 21 without changing each FTP servers ports?  I just want each business/person to type in
    the subdomain for their business and it connect up to their assigned FTP directory over port 21.
    10) If the physical DC manages DNS for all Virtual servers, can I forward sub domain requests to the proper virtual server so they connect to the correct RemoteApp screen etc.  Again all I have is 1 IP.
    I hope all of these questions make sense.  I just want every business to be independent of each other on the Hyper-V, each on their own virtual server, all without changing default ports on each server, each server running RDS, (possibly) AD, (a few) FTP,
    and all over a common single WAN IP.  Hoping subdomains (possibly managed through IIS on the physical DC) will redirect users to their appropriate virtual server.

    If you really want to run your own multi-tenant service provider cloud, Microsoft has defined the whole setup needed.
    They call it Infrastructure as a Service Product Line Architecture.  You can find the full documentation here -
    http://blogs.technet.com/b/yuridiogenes/archive/2014/04/17/infrastructure-as-a-service-product-line-architecture.aspx
    There are several different ways of configuring and installing it.  Here is a document I authored that provides step-by-step instructions for deploying into a Cisco UCS and EMC VSPEX environment -
    http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/UCS_CVDs/ucs_mspc_fasttrack40_phase1.pdf
    This document contains the basic infrastructure required to manage a private cloud.  I will soon be publishing a document to add the Windows Azure Pack components onto the above configuration.  That is what would more easily provide a multi-tenant
    experience with a Azure look and feel.  It is not Azure, but the Azure pack is a series of applications, some of which came from Azure, the provides Azure-like capabilities only in a service provider type of environment.
    Whether you use my document or not (which has actually corrected errors found in the Microsoft documentation), you should take a look at it to see what it takes to put something like this up, if you are really serious about it.  It is not a small undertaking. 
    It requires a lot of moving pieces to be coordinated.  Yes, my document is designed to scale to a large environment, but you need the components that are there.  No need re-inventing the wheel.  Microsoft's documentation is based on a lot of
    real hands on experience of their consulting organization that has been doing this for customers for years.  This one is also know as Fast Track 4.  I've done 2 (2008 R2) and 3 (2012), also and it just keeps getting more complicated based on customer
    demands and expectations.
    Good luck!
    . : | : . : | : . tim

  • Error publishing service in Service Registry

    Hi experts.
    I've configured Service Registry in a SAP PI 7.11. Everything seems to work correctly but I can't publish services there. When I try to publish from Directory or directly in Service Registry by wsdl I'm getting this error:
    com.sap.aii.ib.core.uddi.RegistryClientException: Services registry is not available; for more information, see the log
         at com.sap.aii.ib.server.uddi.RegistryClientDelegateProvider$EjbRegistryClient.publishPhysicalSystems(RegistryClientDelegateProvider.java:440)
         at com.sap.aii.ibdir.server.wsquery.WSQUDDIPSPublishTB.execute(WSQUDDIPSPublishTB.java:91)
         at com.sap.aii.ibdir.core.simulation.DefaultTaskBroker.execute(DefaultTaskBroker.java:171)
         at com.sap.aii.ibdir.server.simulation.TaskQueryService.specialQuery(TaskQueryService.java:33)
         at com.sap.aii.ib.server.query.SpecialQueryServiceProvider$SpecialQueryServiceImpl.specialQuery(SpecialQueryServiceProvider.java:63)
         at com.sap.aii.ib.server.query.QueryServiceImpl.specialQuery(QueryServiceImpl.java:443)
         at com.sap.aii.ib.server.query.QueryServiceBean.specialQuery(QueryServiceBean.java:112)
         at sun.reflect.GeneratedMethodAccessor762.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:592)
         at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
         at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
         at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
         at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
         at $Proxy1646.specialQuery(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor761.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:592)
         at com.sap.engine.services.rmi_p4.P4DynamicSkeleton.dispatch(P4DynamicSkeleton.java:234)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:362)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:69)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:67)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:41)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:977)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:57)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:55)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327)
    I think is a authorization problem but I have role to read and write in service registry. I can see this error in Service Registry Trace
    Invalid Response code (401). Server [http://xxxxxx:50000/uddi/api/publish/] returned message [Unauthorized].
    Any idea? Maybe the user you have to fill in Service Registry Configuration Wizard?
    Regards
    Edited by: Christian  Abad Chico on Feb 20, 2012 1:00 PM

    Hi,
    It looks like you are missing some Services Registry preconfiguration. Please find a description how to configure the Services Registry under the SAP Help document below:
    http://help.sap.com/saphelp_nwce711/helpdata/en/47/d391d7b8fc3c83e10000000a42189c/frameset.htm
    There is also a wizard that you can use for this purpose:
    http://help.sap.com/saphelp_nwce711/helpdata/en/f7/6182bd68434595ba5105a0a346efcc/frameset.htm
    Hope this helps,
    Greg

  • Issue with web publisher services

    hello,
    i try to use the bi publisher services and in particulary SecurityService(Jdeveloper 11.1.2.0.0 and publisher 11.1.1.5) .
    the security model is setting on Bi publisher security.
    i use the http://bipconsulting.blogspot.com/2010/04/how-to-use-bi-publisher-web-service.html for help
    when i run this code
    package com.oracle.xmlns.oxp.service.v2;
    import java.net.URL;
    import java.util.ArrayList;
    import java.util.List;
    import javax.xml.namespace.QName;
    // This source file is generated by Oracle tools.
    // Contents may be subject to change.
    // For reporting problems, use the following:
    // Generated by Oracle JDeveloper 11g Release 2 11.1.2.0.0.6017
    public class SecurityServiceClient
    public static void main(String [] args)
    try {
    SecurityService_Service securityService_Service = new SecurityService_Service();
    SecurityService securityService = securityService_Service.getSecurityService();
    String sess_id=securityService.login( "Administrator", "password");
    System.out.println(sess_id);
    securityService.createUser("jean", "jean", "Administrator", "password");
    } catch (Exception ade_e) {
    System.out.println(ade_e);
    i have the following output
    3447993075936D60EEF980C3472AC415
    javax.xml.ws.soap.SOAPFaultException: java.lang.SecurityException: Security violation: /~jean; administrator does not have permission to create this folder.
    Process exited with exit code 0.
    If someone can help me,it would be great.
    best regards
    jean marc

    i try with soapui for the method createuser,
    i have the same issue.
    any help ?

  • How to call a text FTP proxy service from a Java client ?

    Greetings,
    I've configured a text FTP proxy service which downloads files from a FTP server. It pols a directory on the FTP server and, as soon as a file respecting a given pattern apears it is downloaded. I tested the service in the test console and by putting some test files onto the FTP server. Now, I need to be able to test it from a Java client. How may I do that ? I need to write a Java client to connect to the OSB and to tell to it to use the FTP proxy in order to download a given file, from a given location and to put it in a given location on the client machine. Many thanks in advance for any help. A sample would be great !
    Kind regards,
    Nicolas

    Ok, I understand. The crucial question here is "what is a caller that you refer to?"
    Don't get me wrong, but the problem here is that you probably don't understand, what OSB is good for. OSB is an event-driven system. The event in your case is a new message in remote FTP server. You have to define what should happen when that event is fired. And that's all. You don't have to involve other client (or caller) for this case.
    You should define your FTP proxy to retrieve all relevant files from FTP server and then you should route them based on their name/content/encoding/whatever to different consumers. You can also have many proxies if you want - one for each name. It's up to you. But you don't have any "callers" in either case.

Maybe you are looking for