Ftp server down?

Hi,
It seems that the FTP server is down, because I couldn't download anything.
Anyone got a mirror site?
ftp://ftp.sap.com/pub/sdn/devkits/netweaver/abap/SAPNetWeaver04SneakPreviewABAP.rar
Thanx,
Roy

Hi Roy,
I tried and it works fine.
Did you check you firewall? Is the ftp-port open?
Best Regards
Renald

Similar Messages

FTP Adapter File Polling does not raise error when FTP server is down

Hi All,
Thanks in advance.
I am polling for new files in a FTP Server. However, if the server is down there is no way for me to catch the fault to notify someone. I am using fault-policies but that never gets triggered when polling an unavailable FTP Server.
One option is to have a completely separate scheduled process (SOA or not) that tries to connect to the servers but I am trying not to go that route just to keep things manageable and within the realm of the process.
I am sure that I am not the only one polling for new files in a FTP Server, so I thought to pick your brain to tackle this scenario.
Thanks for taking the time to read this.

I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10

Trigger aler or send a mail if target ftp server is down

Hi,
I am sending file from source to target using XI.
Here my target is FTP. If the FTP server is down on the target side while placing the file we need to trigger an alert or send an email to the sender.
Thanks & Regards
Sowmya.

Once the adapter engine tries for the standard retry time and interval, it will change the message status to System Error.
Create Alert Rule for the Adapter Engine errorrs. SelectAdapter Engine and make the adapter type as All. Rest is same
The specified item was not found.
Regards,
Prateek

What happens if receiver FTP server is down or replaced.?

Hi folks,
In a scenario like IDOC to FILE or any other to FILE , for any reasons FTP server was down or replaced. Then what happens to the messages ( with quality of service EO r EOIO). What is the status of messages.
If the FTP server has been changed then those details has to be entered in SLD.?
Thanks,
Srinivas Reddy

>
Prateek Raj Srivastava wrote:
> For EO cases, the message will be in Waiting state in Adapter engine (monitoring through RWB) until it retries to post data to FTP. After all retries, it goes to System Error. EOIO messages will move to Holding status.
>
to add to this, if you are using EOIO you will have to restart the first message in the queue before others so that the processing can continue.
In short, either EO or EOIO, the messages will be persisted in PI. you can always manually resend them.
Another option /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

FTP server was down when XI was sending messages

Hi guys,
I have the following problem:
Yesterday the FTP server of a legacy system was down while some interfaces were running in XI and were producing some files that should be written in target ftp server. In communication channel monitoring I get the following error:
"Error occurred while connecting to the FTP server "120.2.6.133:21": java.net.ConnectException: Connection timed out: connect"
Is there a way to retrieve these messages somehow without having to run the intrfaces again from source system??
Evaggelos

Just goto...Runtime workbench..
Select the message monitoring there...
then provide the filters like sender business system and receiver business system...then select the start/end date...may be last 7 days/yesterday...
Then select the status as " ALL CONTAINING ERRORS"...you will see all you messages there select and click on resend...You can even reprocess all the messages at the sam time...Just click on "multiple selection" ON and say select all..
Thats it..
Regards,
Ravi

Is the Oracle ftp server shut down??????????

i've been trying to resume a download from the oracle ftp but can not do so. can someone tell me if this a problem with oracle's ftp server or my computer?

I've downloaded about 3/4 of the Oracle 8.1.6 files for W2K and haven't been able to get the last few I need -- it appears that ftp.oracle.com isn't accepting logins for some mysterious reason :-(

Right way of accessing FTP server

I had an important doubt on what is the right way to access an FTP server, is it through the browser or through Windows explorer. I think, the right way is through Windows explorer.
I hope, my question is clear on what is the right way to access an FTP server.
Please revert with the reply to my query.
Regards

through Windows explorerWhy would you think that a Linux forum is an appropriate place to ask such a question?
What happens when you try? (You didn't bother to describe that.)
Your question shows that you seem to have the expectation that you can just dump a question out to some place on the Internet and everyone will teach you everything you ever want to know, as many of your forum questions have been.
Well, here's your answer:
Go use a FTP client program to get files from a FTP server.
If you insist on it being something graphical, go find such a program and install it.
However ...
The simplest method if you are hoping to pull something down to a computer running Linux would be for you learn to use the command line FTP protocol in a terminal window.

How do I get the RSS feeds to work in iWeb'08 when published to FTP server?

There are so many unresolved questions because I have published to an FTP server (Netfirms). HOWEVER, my next task at hand is to resolve the issue of a non-working RSS feed and download capabilities.
The published website is www.vibrationalvoyages.com.
When using Cyberduck to upload to Netfirms, I have to call the file name vibrationalvoyages.com because Netfirms organizes my files under a main folder called www (I also purchased the .org and .net extensions along with the singular spelling of the title, have forwarded those url's to the .com extension, which means I have different website names under Netfirm's main folder www, all pointing to www.vibrationalvoyages.com).
I have to drop the www. in front of vibrationalvoyages.com when publishing to a folder on my computer so, when Cyberduck uploads the files into the main www folder, they are read correctly and published as www.vibrationalvoyages.com. In Cyberduck, the ftp address to upload is vibrationalvoyage.netfirms.com
Before uploading, I use iTweak to insert the Statcounter tracking codes. Then, I use Rage to optimize the site to cut down on the weight (lots of photos). Then, finally, I get to upload which takes about an hour and a half.
SO, HOW DO I GET THE RSS FEEDS TO WORK AS WELL AS THE OPTION TO DOWNLOAD AN MP3 RECORDED MEDITATIONS? I eventually also want to include the download option of podcasts.
Please help! I am doing the best I can to stay in love with Mac but he is turning out to be a pot load of work and the love affair is wearing a little thin.
I haven't even asked about why iWeb still calls some pages 'The family picnic" or why it switches the url addresses to the individual pages. Probably because in the early stages, I copied an entry rather than just do a new one... but I'll worry about that later. I want to get this 'fixed' first and then I'll address the issue, following Roddy's advice to another writer about installing a flash player, for easy download of the MP3 meditations and for when I record the lessons as podcasts. Until I get this RSS issue resolved, however, podcast downloads are out of the question!

Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG

How to transfer the attachment (DB object in the table:SOC3) to FTP Server

Hi,Experts:
I have a requirement to transfer an attachment to FTP Server,but the attachment have exist in DB for objects table(SOC3),I can down it to local PC via FM:SO_OBJECT_DOWNLOAD,but i can't transfer it to FTP Server via Dataset?
Thanks a lot in advance...........

Hi Marcel,
Thanks for the reply,
I have exported the .gml file from the dev server Then i trying to import that .gml file in the production server. when i click on the import file option .it is opening the popup and disappearing immediately with out browsing the file I dont know wht is the problem around it.
But agin in the production server, i have just opend one existing model. then i clicked on the Import file option. then the popup is allowing me to browse the .gml file. but after i browsed the file, if say ok, it will be merging with the already opened model itself.
Can u please tell me , what is the problem, i am not able to browse the file ,when no model is not opened in the VC.
REgards
Vijay

Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

Ethmoid is right... There ARE free web hosts, but... as the old saying goes "You get what you pay for" and if you pay nothing?
Most free web hosts are riddled with ads, and some are even hosts to malware. DO YOUR RESEARCH before committing to anything.
While some ISP's do provide free hosting, there are limitations with many of them, such as monthly bandwidth and file storage. You may not be able to get your whole site upto the server (depending on how big it is), or it may be down several days a month due to "excessive" traffic. Again - DO YOUR RESEARCH before committing to anything.
There are also a lot of services that run in the range of $4-7 a month for feature filled, bandwidth enabled hosting. Dreamhost is offering two domains for $3.95 a month right now. I use ICDSoft (have since 2003) and they're $7 a month, but they offer a lot for that.
Lastly, you want to look at SUPPORT. If your site goes down, and your "free" host is nowhere to be found.... It's as bad as having no site at all, if you cant get it fixed and no one can access your URL for days on end.

Contorlling FTP Server

I want to Run a ftp server on my machine. My FTP Client will send the data to FTP Server (not a file but byte data). The FTP Server should listen to the data, store it in a file on the local hard disk. How can I wrote a code in JAVA to configure the server to receive data from client and store it in the file

gunjannigam wrote:
By writing the code at server side I meant a code which will run on the machine on which my server is runningSo you want to write an FTP server! That is the code you will have to write on your Server - an FTP server!
Configuring the data I meant that i need to capture that data bytes and I need to save them into file,That is the job of an FTP server taking bytes from your client using the FTP protocol.
i.e. if I am getting 5000 bytes on server I need to save those 5000 bytes into a file on the server. Which is exactly what an FTP server does.
The data will be not be coming packed in file. I have to write them into the fileFTP data is sent as a stream that can come from any source which may or may not be a file. Jakarta Common Net FTP client allows this.
I have written a cut down FTP server in Java. It is not very good and it took me a long time. Whether you are doing this for a College/University or for a company they surely cannot expect you to write an FTP server! It is only cost effective if it is for your own benefit. Just install one of the free FTP servers on your Server.

Some files never getting transferred to our FTP Server

We are moving configuration changes from one instance to another using 'Manage Implementation Projects' functionality. This PeopleTools functionality creates DM scripts to transfer functionality like Billing, Contracts, etc to another instance when you click 'Export'
It is supposed to send the scripts to 'FTP Server > psdata > PSFILEDIR' on a Windows system in Financials 9.1 using PT 8.53.04. We constantly get a 'Permission Denied' from this process when trying to do this.
This problem happens in all DEV instances, yet the process works fine in the Prod instance. I have examined the permissions in the PSFILEDIR and compared them in DEV and PROD and find no differences

I guess you didn't like my last answer. So I'll try again. First off, forget FTP. We don't even care about FTP and adding it to the Title of the question just confuses things and maybe gets you less responses. In production, does this open a Dialog box/Save window when the export finishes?
My assumption is that you have the variable PS_FILEDIR set to \\s-wpstbftp1\s$\psdata\PSFILEDIR for the app server. Is that true?
You are failing on line 10 which is
&PROJECT_FILE = GetFile(&FILENAME, "W", %FilePath_Relative);
The PSAPPSRV process is trying to open a file in write mode. It's using Relative Path which appends &FILENAME to the path which is determined by either PS_FILEDIR or PS_SERVDIR. This part of the code is not even the part where the file is supposed to be placed at a final destination. This is very initial step in creating the file, nothing is being written yet. The PSAPPSRV process at this point knows nothing about FTP or other network transfer protocols, it simply knows that it should use \\s-wpstbftp1\s$\psdata\PSFILEDIR as the path. To the PSAPPSRV process this is a path that is locally available on the server,wWhen the system call comes through to the OS to attempt to open this file, the operating system is what allows this to seamlessly connect to a network resource.
There are two potential points where for this and they both relate to the user running the PSAPPSRV process.
You are using the Admin share for the S: drive on s-wpstbftp1. This means any connection to this PATH must be made as a user that is an Administrator on server s-wpstbftp1.
The PSAPPSRV processes must be running as a user that is an Administrator on the other server. This requires configuring the Oracle ProcMGR Windows service to run as a user that has access to the resources in question.
So to fix this you need to look at the ProcMGR service and set it to run as an Administrator user from s-wpstbftp1. This may require additional tasks such as setting up that user on the PeopleSoft server. Use task manager to look at what user is running the PSAPPSRV processes and make sure it's the user you need it to be.
In my humble opinion though, this is bad configuration:
You shouldn't be using Admin shares
I don't like relying on remote server paths that aren't redundant storage devices (NAS or SAN). What if this server is down and other processes need to use this path?
You appear to be expecting this file at a location where it is created for further processing by the code, not the final destination. The file is intended to be downloaded by the user. I don't know why the developer decided to leave the file on the file system, but they may decide to clean up after themselves or change how this works in the future. The file is created, inserted into the database, then read from the database, sent to the user, and deleted from the database. The code calls DetachAttachment which the PeopleCode Language Reference book says:
Use the DetachAttachment function to download a file from its source storage location and save it locally on the end-user machine. The file is sent to the browser with appropriate HTTP headers to cause the browser to display a save dialog box to the user.

Problem with passive mode FTP server and NAT

Hi,
I have a problem with Passive mode FTP and NAT.
I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
Firewall rule config without NAT:
00001 allow udp from any 626 to any dst-port 626
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
Firewall rule config with NAT
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en1
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
Best regards,
Peter
B&W G3 Mac OS X (10.4.5)

Media/Lacrosse-1-tiny.3gp
I can't find the file on your server.
They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them.

SSH & FTP going down randomly

Hi
i have an eMac here.
This EMac is configured to offer:
* SSH Access
* FTP Access (using PureFTPd)
In Sys-Prefs -> Sharing i enabled
* FTP Access
* Remote Login
As this Mac is surveillanced by my Nagios system i have a good method to check if those services are running or better accessible.
Now the problem:
Both, FTP & SSH keep dying after some time. Can be hours or days. Its not related to each other....so from time to time FTP is down....then again SSH is down.
A simple fix is just disabling the service and re-enabling it. But i want to try to fix that permantently.
any ideas ? Missing informations ?
Best regards
fidel

The first, and most obvious problem is that you're trying to use both PreFTPd and Apple's provided FTPd.
System Preferences -> Sharing only knows about Apple's FTP server, not any third-party FTP server you've installed. So you should use one or the other, but not both.
That said I don't think it's your issue, just something that isn't going to work.
As for the problem itself, what do the logs say?

Gedit can't save to mounted ftp server

I mounted an ftp server with curlftpfs, as the wiki recommends this method:
sudo curlftpfs ftp://some.server.com /media/ftp.some.server.com/ -o user=user:pass,allow_other,ftp_port=-
I had some trouble to get it to work because it turns out I have to use active mode (I expanded the wiki), but now it works great, and I can cp, mv, rm and edit files as if they were on my local machine.
Except in gedit, which refuses to save files to the mounted ftp. At first it segfaulted, just printing 'Segmentation fault' to the terminal, but this crashing stopped after disabling all plugins. But instead of crashing I now get "Could not save the file $FILE. You do not have the permissions necessary to save the file. Please check that you typed the location correctly and try again."
Same thing when starting gedit as root, odd. So I checked what the permissions were:
ls -l /media/ftp.some.server.com/file.asp
---------- 1 root root 811 17 jan 21:48 /media/ftp.some.server.com/file.asp
I guess this is because the FTP server runs some flavor of windows and doesn't have unix file permissions. After googling unsuccesfully I wanted to start a topic in the networking subforum, but first I tried to change the file using nano, to be sure it wasn't a gedit issue. To my suprise nano can indeed save the file, so I'm putting this in applications and desktop environments.
I think nano is checking the permissions before trying to save the file, while gedit doesn't. Does any of you got an idea to stop it doing this, or to fix the permissions?
Last edited by berz_ (2012-01-17 22:33:02)

With some help from the nice guys in #gedit, I managed to narrow the problem down to gio, a component of glib used by gedit to save files.
I did file a bug on the gnome bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=668147.

Ftp server down?

Similar Messages

Maybe you are looking for