FTP Server have been accessed by Internet Explorer 7

Please,
I have configured a FTP Server on Solaris 9. It is working very well, but yesterday when I tried to connected through my browser Internet Explorer 7 I got a surprise, bad surprise... When I type my user and password the filesystem tree of my server appeared to me... I could see and access all content of root filesystem, instead of only can see the content of my home folder...
Did anyone face this problem????

Hi,
Maybe you missed a step during setup of your anonymous ftp server?
http://docs.sun.com/app/docs/doc/819-2240/ftpconfig-1m?l=en&a=view&q=ftpconfig
http://docs.sun.com/app/docs/doc/817-1717/wuftp-10?l=en&a=view&q=anonymous+ftp
John

Similar Messages

Is it possible to have a VI "run when opened" when accessed via Internet Explorer?

I am trying to get a remote panel application to "run when opened" when is accessed via Internet explorer. I have multiple remote panel licenses on the server and the VI is Re-entrant. The application works well except for this issue. Having the VI "Run When Opened" via IE is very important to the user. As is, when IE opens, the user must click on the panel image once to get the VI's attention and then again on the start arrow to run the program. Is there any way around this or a way to simplify the process?
Thanks.
Solved!
Go to Solution.

This is actually the intended operation of remote front panels, however, we can simplify the operation to meet closer with what your customer wants. Basically, if you were to always have your program run in somewhat of an idle state, you can use the Application Control>>Property node for 'RemotePanel.ConnToClients' property to determine when a user is connected and run the proccess of the program as soon as a connection is detected. When no connection is detected you could have the program run in an idle state. The attached screenshot shows a general way to do this. Have a good evening!
-Bob
-Bob
Attachments:
idle state.JPG ‏45 KB

WRT320N Ver 1 - UNABLE TO ACCESS 1 WEBSITE I have been accessing for a year.

As of two days ago, I am unable to access www.rolexforums.com
Now, this website ONLY (to my knowledge) is being blocked by the wireless router. No one has made any changes to the settings. I have reset the router back to factory specs, and upgraded to the latest firmware. I have reset everything multiple times, and looked to see if somehow that site was added to my blocked list, which was never set up, and remains empty. That whole section has always been disabled and remains disabled. I worked with Cisco Tech Support and they could not resolve the issue.
Cannot ping the site.
Traceroute:
1 8.289 ms 6.898 ms 7.728 ms 10.135.40.1 (10.135.40.1)
2 9.157 ms 10.588 ms 6.989 ms visthbrc01-gex0915.sd.sd.cox.net (68.6.11.90)
3 12.074 ms 10.587 ms 12.370 ms fed1dsrj01-ge704.rd.sd.cox.net (68.6.8.210)
4 11.679 ms 11.060 ms 11.873 ms fed1sysc10-get0300.sd.sd.cox.net (68.6.8.52)
5 10.824 ms 11.052 ms 11.906 ms 68.6.8.121 (68.6.8.121)
6 69.729 ms 67.941 ms 68.901 ms te0-0-0-3.ccr21.ord01.atlas.cogentco.com (154.54.2.218)
7 182.767 ms 172.632 ms 171.322 ms te0-3-0-6.ccr22.bos01.atlas.cogentco.com (154.54.43.198)
8 * 174.078 ms 171.751 ms te0-1-0-1.ccr22.lpl01.atlas.cogentco.com (154.54.42.106)
9 178.339 ms 178.736 ms 180.831 ms te0-2-0-7.mpd22.ams03.atlas.cogentco.com (154.54.37.109)
10 182.759 ms 184.250 ms 182.360 ms te0-0-0-1.mpd22.fra03.atlas.cogentco.com (130.117.0.134)
11 185.745 ms * 185.966 ms te1-7.ccr01.str01.atlas.cogentco.com (130.117.3.82)
12 187.892 ms 187.672 ms 189.827 ms te1-2.ccr01.zrh01.atlas.cogentco.com (130.117.3.14)
13 353.244 ms * 335.103 ms te1-3.ccr01.zrh02.atlas.cogentco.com (130.117.48.210)
14 * * * te1-3.ccr01.zrh02.atlas.cogentco.com (130.117.48.210) Request timed out.
15 * * * te1-3.ccr01.zrh02.atlas.cogentco.com (130.117.48.210) Request timed out.
16 * * * te1-3.ccr01.zrh02.atlas.cogentco.com (130.117.48.210) Request timed out.
17 * * * te1-3.ccr01.zrh02.atlas.cogentco.com (130.117.48.210) Request timed out.
18 * * * te1-3.ccr01.zrh02.atlas.cogentco.com (130.117.48.210) Request timed out.
19 *
Then I stopped it.....
I have been accessing this site for months with this wireless router and all the same computers without any issues. When I try now, I get:
Safari can’t open the page.
Safari can’t open the page “http://www.rolexforums.com/” because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again.
When I try with a PC laptop and the PC that is directly cabled to the WRT320N I get the windows equivalent message.
When I connect any computer directly to the cable modem, I have no connectivity problems....
Has anyone else ever experienced such an issue, and if so, how was it resolved, if it was resolved.
Thank you!

In the router lower the MTU to 1365, save settings and try again.

Report on which computers have which version of Internet Explorer?

Hi, Does anyone know of a simple report or way of reporting on which computers have which version of Internet Explorer?
e.g. I expect to mostly find 7, but checking also for 6 & 8).
As its integrated into the OS this isn't as easy to determine as with other products installed. I know there are simple manual check like "Help About" and HKLM\SOFTWARE\Microsoft\Internet Explorer
Thanks.

Hi
Torsten is rigth, the reigstry path does contain version information (and other usefull information). You can get the information by:
Adding this entry to the configuration.mof file:
#pragma deleteclass("IE", NOFAIL)
[DYNPROPS]
Class IE
[key] string KeyName;
String MkEnabled;
String Version;
String Build;
String W2kVersion;
Uint32 IntegratedBrowser;
[DYNPROPS]
Instance of IE
keyname="SystemCenter.fr";
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|MkEnabled"),Dynamic,Provider("RegPropProv")] MkEnabled;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|Version"),Dynamic,Provider("RegPropProv")] Version;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|Build"),Dynamic,Provider("RegPropProv")] Build;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|W2kVersion"),Dynamic,Provider("RegPropProv")] W2kVersion;
[PropertyContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Internet Explorer|IntegratedBrowser"),Dynamic,Provider("RegPropProv")] IntegratedBrowser;
And enter this information into the SMS_def.mof file
#pragma namespace ("\\\\.\\root\\cimv2\\SMS")
#pragma deleteclass("IE", NOFAIL)
[SMS_Report(TRUE),SMS_Group_Name("IE"),SMS_Class_ID("IE|IE|1.0")]
Class IE: SMS_Class_Template
[SMS_Report(TRUE),key] string KeyName;
[SMS_Report(TRUE)] String MkEnabled;
[SMS_Report(TRUE)] String Version;
[SMS_Report(TRUE)] String Build;
[SMS_Report(TRUE)] String W2kVersion;
[SMS_Report(TRUE)] Uint32 IntegratedBrowser;
Kent Agerlund | http://scug.dk/members/Agerlund/default.aspx | The Danish community for System Center products

Launching Microsoft Access from Internet Explorer to view a downloaded MDB file opens the wrong file (not a problem if I use Firefox)

When clicking on a link (in Internet Explorer 9) to download an Access MDB file and then choosing to open the file directly in Microsoft Access (2007) instead of saving it, the file is copied to Temporary Internet Files but Microsoft Access tries to open
a different file and displays an (Unrecognized database format) error.
When I click on the option to open the file, the MDB file is copied to Temporary Internet Files\Content.IE5 but instead of that file, Access tries to open a different (incorrect) file located in Temporary Internet Files\Content.MSO (e.g. in the above error
message, NativeView.do is an XML file containing an error message).
I don't see this problem with Word, Excel or PowerPoint files. When opening a Word file (without saving) the Word file is copied to Content.IE5 but an identical .tmp file is created in Content.MSO which when opened in Microsoft Word displayed the required file
correctly. The same happens for Excel files. PowerPoint appears to be handled a little differently (no .tmp file created in Content.MSO but the required file is still copied to Content.IE5) but the PPT file is still opened correctly in Microsoft PowerPoint.
I think the Content-Type "application/msaccess" is fine because Internet Explorer does launch Microsoft Access. It just tries to open the wrong file (or so I think). However, it looks like the file type is not being determined. Here is what I noticed
when trying to open different Microsoft Office files using Internet Explorer:
The last one is the MDB file. As you can see, only for this type of file, the "Type" (Microsoft Office Access 2007?) is not displayed in this Open/Save dialog box.
On Firefox, I don't see this problem. When I tried clicking on the link to the MDB file in Firefox, Microsoft Access was launched and the file was opened correctly. Is there something I can do so the MDB file is opened properly using IE? I can add/change headers
in the HTTP response that writes this file to the output stream (on disk) if that helps.
Thanks for your time!

Sounds like a problem symptom to be discussed in either an IE forum or an Access forum, not here. How did you come to post here? ForumsRedesign. That might be an on-topic issue for this forum. <eg>
Can you find your way to either of those other forums easily from here? Another on-topic question for here I think. ; )
Robert Aldwinckle
Oops, my bad. Thanks for letting me know! :)
I've re-posted it here: http://social.technet.microsoft.com/Forums/ie/en-US/1a818501-296c-42fb-8abb-ba914629c962/launching-microsoft-access-from-internet-explorer-to-view-a-downloaded-mdb-file-opens-the-wrong-file?forum=ieitprocurrentver
Hopefully that's the right place for this.
Cheers!

No external images in Outlook 2013 & no internet access in Internet Explorer 11

I use a an automatic configuration script http://XXXXukproxy.internal.XXXXXXXX.com/proxy.pac
I also use a combination of 2 VPNs through Avaya VPN Client or Cisco AnyConnect Secure Mobility Client.
When I'm connected to the VPN with the Avaya VPN Client I can't get ANY internet pages to load in Internet Explorer and I can't get ANY external images to load in Outlook 2013
I can use the exact same proxy settings in Chrome and Firefox with no problems what so ever.
If I remove the automatic configuration script I still get no internet access in Internet Explorer.
When I'm connected to the VPN with the Cisco AnyConnect Secure Mobility Client it's fine. It's also fie when I'm not using any of the VPN's
Anyone got any ideas? Can't be the proxy or the VPN as it's perfectly ok in Chrome and Firefox.
Thanks in advance.

Hi,
First please run Outlook in Safe Mode:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
We may also try to change the Location of Temporary InternetExplorer Files in Internet Explorer to test the result (the steps below are for IE 10):
Internet Explorer -> Internet options -> General
tab -> Under Browsing history, click on Settings
button -> Temporary Internet Files tab -> Under Current location, click on
Move folder button -> Choose the new location, click
OK.
Regards.
Melon Chen
TechNet Community Support

Statistic number of forms that have been accessed/loaded

Hello,
I would like to ask if it is possible to know the statistic number of forms that have been accesses/loaded on the workspace base on each process category/folder to create a weekly or monthly report?
Thanks,
Han Dao

You can export any response as a PDF, which you can then archive.

Each time I want to use Firefox I have to go into Internet Explorer, go to the Firefox website and dowlload it again. It just won't open by itself on my computer.

I f I want to use Firefox, I have to go into Internet Explorer, find Firefox and downloa it again. It just won't ope by itself
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; AskTB5.6)

Make sure Firefox is set as your default browser. See [[How to make Firefox the default browser]]

Since the recent upgrade from Adobe pdf plug-inn Firefox often won't open pdf-files. Uninstalling doesn't help. I don't have this problem with Internet Explorer.

Since the recent upgrade from Adobe pdf plug-inn Firefox often won't open pdf-files. Uninstalling doesn't help. I don't have this problem with Internet Explorer.

Hi efacg,
Most printing issues are solved by resetting the Printing preferences. When you print from Firefox and you click on the down arrow, do you see Defualt and Firefox? Please make changes to the preferences here and preview the document.
If this continues to be an issue please also see [[Fix printing problems in Firefox]]
If there are any other questions, please do not hesitate to ask, we are here to help.

I have both Mozilla Firefox & Internet Explorer installed one my computer, but chose to us Firefox. Several days ago while opening Firefox a screen popped up wh

I have both Mozilla Firefox & Internet Explorer installed one my computer, but chose to us Firefox. Several days ago while opening Firefox a screen popped up which said that my Firefox browser was out of date. I clicked on the box, which said free download. This happened several times and now on my desktop I have Firefox Setup 3.6.13, Firefox Setup 3.6.13.exe, Firefox Setup 3.6.13(2), Firefox Setup 3.6.13(3), Firefox Setup 3.6.13(3).exe, Firefox Setup 3.6.13(4) and I still keep getting the same pop-up screen for a free download of a newer, speedier, more secure version of Firefox. I tried calling Mozilla Corporation in Mountain View, CA; but was unable to speak with anyone. I also got an 800 number (1-800-229-9895) from information and called that number. On the first 800 call the person hung-up. On the second call I spoke to Marv and supposedly got disconnected. On the third call I spoke to Marv again. He informed me that I couldn’t speak to anyone at Mozilla and had to pay $99 to get any help. He also told me that: if I tried to remove the extra Firefox downloads or tried to remove Firefox completely, my computer would crash. I can’t afford the $99 and don’t know what to do next. Can you help me. Jack (Phone number removed by mod).

As far as I know, Mozilla doesn't have any paid support service. There are lots of other companies that advertise paid support for desktop software including Firefox. Maybe you called one of those other providers??
Anyway, I suggest dragging all those exe files on your desktop to the recycle bin. They are all out of date.
Before upgrading, have you considered making a backup? Your bookmarks and other Firefox settings ''should'' be safe during an upgrade, but better safe than sorry. This article describes how you can back up: [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. For example, you can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.
To get the latest Firefox, you can try either of these:
(1) Help > Check for Updates - this should work automatically
(2) Download the installer for Firefox 12 from http://www.mozilla.org/firefox (green button) to a convenient location, then double-click to launch it (Firefox needs to be closed)
After you see Firefox 12, the user interface will look different. For tips on how to restore features you miss from Firefox 3.6, you can ask questions here. For a little advance reading, check out this article: [http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/ Make Firefox 4+ Look Like FF 3.6 | Computer Tech Tips].

Traffic not showing in Notifications IOS 7. I have all turned on in notifications and location services allowed in Maps. I have been all over internet, followed set up instructions, even re-set settings (fixed weather not showing) but still no traffic?

Traffic not showing in Notifications IOS 7. I have all turned on in notifications and location services allowed in Maps. I have been all over internet, followed set up instructions, even re-set settings (fixed weather not showing) but still no traffic?

I should clarify: I didn't know it fell out, but I check my phone often enough that there were only about 10 minutes between when I last put it in my pocket and then realized it wasn't there.
We asked everyone around us if they saw it, and like 10 people were helping us look. But my husband used Find My iPhone and the Prey app right away when we realized it was missing (again, at most 15 minutes from the last time I used it) and it was already in offline / "cannot locate" mode.

How to select which RFC USERS have been accessed my host ?

Hi, guru
how to select which RFC USERS have been accessed my host ?
or how to record the RFC users's trace ?
because the auditor wants to know it.
Best regards,
Michael

how to select which RFC USERS have been accessed my host ?
did you check ST03N->User profile ?
or how to record the RFC users's trace ?
Check ST01 for system trace.

Printer print size is very small. Do not have this problem with Internet explorer.

When I try to print something in Firefox, the printer print size is extremely small. I do not have this problem with Internet Explorer.

File > Page Setup - '''Scale''' <br />
100% or Shrink to Fit is usually best.

Determining if any files have been accessed remotely

Hello Forum,
Is it possible to view if any files have been accessed by a remote user? The machine in question is a client desktop running Windows 7 ultimate and is not part of a domain. I would like to be able to see if any files on this desktop have been
accessed remotely.
thanks
Ron
Ron Finnegan DHHS NIH NIMH LNT

Ronald
In addition to the other replies you have received, you can check if you have been hacked. From various sources, I’ve compiled this list of some things that can be checked:
1. First of all check if any rogue programs or services are running. Open a Run window (Windows Logo key+R), type msconfig and press Enter. On the Startup Tab, uncheck any entries that are unknown to you. Repeat this for the Services
Tab. If you uncheck anything restart the computer and when it restarts, put a tick in ‘Don‘t show this again‘ as you‘re effectively doing a selective start up.
2. It’s probably not relevant these days but this only takes a few seconds to check. Open
a Run window (Windows Logo key+R), type cmd and press Enter. Now type system.ini and press Enter. If under [drivers] there is an entry
user=user.drv, you may have been hacked, so restart the computer and check again. An entry of timer=timer.drv is safe.
3. Now check the net statistics:
3A. Open a Run window (Windows Logo key+R), type cmd and press Enter. Now type netstat -ano and press Enter. If ‘Established’ is in the State column, make a note of the PID and the Addresses alongside
it, as someone may be hacking you. If the IP Address begins with 192.168, you are safe as it’s part of your home network.
3B. To check if you are being hacked, open Task Manager by
hitting Ctrl+Shift+Esc. Go to the Processes Tab > View > Select Columns and put a check in the PID box so that the column is displayed.
3C. If the PID that you noted in 3A appears and it is not a name that you recognise, right-click it and End the process. You can click the word PID at the top to sequence the numbers to make it easier to find. Restart the computer and check again.
3D. If you didn’t find the PID, restart the computer and rerun the netstat –ano command. Open Google in a browser window and type the IP Address into the search box. If it’s a suspicious site, restart the computer and check again
4. Lastly, run your ‘anti’ programs to clear up any residual files, which you should be doing on a regular basis anyway.
Ninety-nine per cent of politicians give the rest a bad name!

Collection may have been accessed after transaction exception ?

I am using Forte for Java EE to create 2 CMP Entity
Beans : Employee and Paycheck. I access the Employee
Entity bean from servlet and then look up the associated Paycheck objects as shown below:
InitialContext initial = new InitialContext();
Object objref =
initial.lookup("java:comp/env/ejb/employee");
EmployeeLocalHome ref = (EmployeeLocalHome) objref;
if ( ref == null)
System.err.println("EmployeeLocalHome not found !");
EmployeeLocal emp = ref.findByPrimaryKey(new Integer(empid));
if ( emp == null)
System.err.println("Find failed..EmployeeLocal not found ! ");
Iterator paychecks = emp.getPaycheck().iterator()
At this point I get the exception:
java.lang.IllegalStateException: Collection may have been accessed after transaction completion.
at com.sun.ejb.persistence.PMSet.iterator(PMSet.java:72)
at payroll.paycheck.LoginViewBean.handleSubmitRequest(LoginViewBean.java:218)
Any pointers on where i am going wrong ?

I have figured out what the problem is. I was running an old version of SAP GUI. Creating the GP with SAP Transaction defaults to GuiType=WinGui instead of WebGui.

FTP Server have been accessed by Internet Explorer 7

Similar Messages

Maybe you are looking for