FTP Server Won't Authenticate - since "Startup Disk Full"

We've been running a web server for several years, and use Dreamweaver and connect via FTP. It worked fine, until...
A few days ago, the system disk ran out of space, I moved a few GB off, and restarted. By that time, of course, a few applications had shut down, but came back up fine. Except FTP. It comes up, and I can connect. However, none of my user IDs will authenticate. I've stopped and restarted, twiddled with parameters, and tried to connect from multiple machines and multiple addresses, both inside and outside of our internal network.
No go.
Any suggestions on anything that might have been corrupted, locked, etc. that could be causing this?
Thanks,
-Rick

I have had this happen after every Software Update (Major Release) and can see how it might happen with a disk full condition.
OK We either have an issue where it does not know how to authenticate you or that it has ZERO confuration info any more.
To figure out which is which I need a list of the following directory. Please post the output of this folder
Code:
ls -al /Library/FTPServer/Configuration/
As you will see in this folder are a few files. The one that is most important is ftpaccess. I suspect that yours is Zero (0) bytes. If so, the you can copy the one called ftpaccess.default into ftpaccees and that should get your ftp accessible again. Also you might have a file called ftpaccess~. That should be used in place of ftpaccess.default under every reasonable circumstance.
So to do this, issue the following command
Code:
sudo cp /Library/FTPServer/Configuration/ftpaccess~ /Library/FTPServer/Configuration/ftpaccess
(or if you only have .default
sudo cp /Library/FTPServer/Configuration/ftpaccess.default /Library/FTPServer/Configuration/ftpaccess )
That is a start if you still have issues pst them and we will sort them out with you.
Peter

Similar Messages

Pro Tools won't install. Startup disk full-not true.

I'm trying to install Pro Tools 10.2 on a Mac Book Pro OS X 10.7.4. I'm doing a clean install, but the installation won't complete. It bogs down half way through. I finally have to force quit the installer because it says my startup disk is full. This is not true because I have 500 gig of memory left on my drive. My trash is empty. I don't know what to do.

You seem to know that an Intel Mac requires a drive formatted with a GUID partition table to boot from it, so that much of your scheme should work, even if you are formatting the drive from 10.4.4 via Target Disk Mode with a PPC Mac, as long as you are using a version of Disk Utility that offers the GUID partition table formatting option (in the Partition tab, in the "Options..." drop down sheet.)
However, it isn't clear if you are then trying to install the OS onto the Intel iMac while still in Target Disk Mode, or which installer you are using. As already explained, you can't install an Intel version of the OS from a PPC Mac while in TDM -- as far as the installer knows, the target is just a drive attached to the PPC Mac, so it will inform you that the Intel OS version can't be used with that Mac.
So, the solution is to make sure the drive is formatted with the GUID table & then install the OS onto the Intel iMac while booting it from the iMac's own installer disk. If necessary, you can access the installer's version of Disk Utility before you begin the installation by selecting it from the "Utilities" menu & checking or reformatting the drive before the install.
This should work fine, unless for some reason you cannot boot the iMac from its original installer disk. If that is the case, please let us know.

My MacBook Pro Won't Start-The Startup disk is full and I get a white screen

When I turn it on the log in screen appears and also a message saying "Startup disk full,please delete some files" , so I log in and it just takes me to a white screen,I've tried going to the disk utility by doing Command+R when turing it on ,and I repaired Macintish HD and after that it said "Macintish HD volume is OK".Thanks for the help

1. Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
2. Empty Trash.
    http://support.apple.com/kb/PH10677
3. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
4. Delete old iOS Devices Backup.
    iTunes > Preferences > Devices
    Highlight the old Backups , press “Delete Backup” and then “OK”.
    http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
5. Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

Startup disk full error - boots normally but won't start finder

I'm having a problem in which my iMac when it boots gives me an error that the startup disk is full, but other than that it can boot normally and allow me to log in, but after that the startup stalls. I never get past the default "outer space" desktop image and finder never starts, so there's no icons, no dock, and nothing on the menu bar. What's weird is that Safari and Mail start and I can see them because I believe I have them starting automatically at boot. Safari works (I'm using it now to enter this discussion). Mail on the other hand starts but is hung checking for the servers for incoming mail.
I've tried to boot in safe mode (holding down Shift key at startup), but it doesn't work.
I've tried to boot in single user mode (holding down cmd-S at startup), but it doesn't work either.
I've tried to boot from Snow Leopard installation media (holding down C at startup), but it doesn't work as well.
Each time I try one of these alternate boot methods, it just takes me to the normal login screen with the startup disk full message. I click OK, login, and get stuck.
I'm just trying to get the finder started so that I can delete some files, but I just can't get that far. It's strange that the browser works perfectly and internet connection is fine, but nothing else works.
Thoughts? Thanks. - Mike

Hi Lina, and welcome to Apple Discussions.
Safe Mode might allow you to boot and free up some space.
If you have access to another Mac and a FireWire cable, another option would be to use FireWire Target Disk Mode to transfer data to the other Mac and delete it on your MBA.
If either way works, you want to open up somewhere around 15% free space. Once you do that, run Repair Disk: Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen select the language and click Continue> click on the Utilities Menu in the menu bar>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself).
Ultimately, though, it sounds like you need a larger HD . . . .

What do i need to do when i get a startup disk full error?

What do i need to do when i get a startup disk full error? I can't update software or use my MacAir at all.

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Adobe Photoshop Scratch Disk Full/Startup Disk Full error - PLEASE HELP

Dear ALL,
I have started to notice recently that when I run Photoshop CS on my Mac OSX Tiger, I am getting the Startup Disk Full error message. Never happended before.
Since my initial post I downloaded Macaroni (utility) and have run the daily/weekly/monthly backups, checked the /private/var/vm and /private/var/log and /Volumes. Nothing unusual there...
When I started getting this error I had 32GB left on a looked at my HD and I seem to have 32GB available on a 152GB drive. Now after deleting I have 76GB capacity left.
But when I tried to open a Photoshop PSD or TIFF file and do a crop I still get tge Startup Disk is Full error followed by the Adobe Photoshop error Scratch Disk is Full.
I am thinking of running the Disk Utility from the Applications/Utilities/Disk Utility and doing a Verify Disk and Verify Disk Permissions followed by Repair Disk Permissions. I will be logged into the machine whilst doing this. Is there any danger in this as I have read elsewhere that I need to do this from a bootable volume. If that is the case how do I create a bootable disk/cd? If not then what is the cure to my Disk Full as surely there is now nearly 50% FREE!!!!!
Please help.
Max

PS will always use the boot disk for scratch to some extent even with an alternate primary scratch disk.
Be sure to turn off Spotlight as it causes problems.
4GB of RAM would be nice, I understand small files don't work well if there is more than 4GB RAM but large files will. OS X uses free RAM as cache and RAM disk before using disk drives.
How much RAM is allocated to PS? More RAM would help.
A dedicated lean boot drive helps. Install just what is needed for your work, use a separate drive for data, and yet another RAID volume for scratch.
When in doubt, backup with SuperDuper, and do an erase and then restore. Always backup before repairing; and never, ever, use an old version of Tiger CD/DVD - like 10.4.2 on 10.4.7/.8. Use "fsck" instead, or your emergency boot drive.
Also, give Applejack a shot and delete the cache folders and swap files from time to time to keep a system humming. CS/CS2 and Tiger benefit nicely from more RAM.

ITunes, iPhone startup disk full messages

Since I got my iPhone 3G 2 weeks ago I have started getting "Startup Disk Full" messages. I then noticed that if iTunes is running, not downloading anything or searching for anything my remaining drive space starts to reduce until the messages. If I reboot this will give me back anywhere from 1 GB to 3 GB of drive space. I used to go for months without rebooting now I can't go a day. What would cause this? iTunes 8.0.2, OSX 10.5.5, iPhone OS2.2, Powerbook G4 1Ghz, 160GB drive, 1GB ram.

open up iTunes to see what is taking up the space.. is it applications/Media/Photos and delete appropriately. If not then you might have just hit a bug or installed some bad application.

I keep getting "startup disk full" message even when I already moved all my files/documents to an external hard disk

Dear all,
What should I do? I keep getting the "startup disk full" message even when I already moved all my files and documents to an external hard disk.
Thanks a heap.

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning your files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Startup Disk Full -- Weird

I'm on my Mac Pro as seen below. My main disk has boot camp partition.
Macintosh HD:
U: 73gb
F: 102gb
Windows:
U: 12gb
F: 3gb
In Photoshop CS3, when doing some light photoshop work, I OSX throws up "Startup disk full" and then CS3 throws "Scratch Disk full." Very strange as you can see my main disk has 102gb of free space. I checked the scratch disk settings in CS3 and confirmed that they are on the right drive.
Any thoughts?

I was having the same issue yesterday, I have since reset Safari (of all things?) and haven't had the issue since. Must be an issue with 10.5.2, it never happened before.

Help: Premiere is making my startup disk full, but I set everything to go on an external hard drive.

The iMac I am using is for the sole purpose of editing and nothing else. I have no idea what is making my startup disk full, and I can not locate the files that are filling the startup disk except the fact that it is telling me I am running out of space. The startup disk is a 250GB SSD, the second internal drive is 1 TB HDD. All of my premiere and video files are loaded ton a 4TB G-RAID.

Do you have your projects set to use a drive other than startup?
My 3 hard drives to edit AVCHD are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input & output files

Startup Disk Full Error - Please help

Dear ALL,
I have started to notice recently that when I run Photoshop CS on my Mac OSX Tiger, I am getting the Startup Disk Full error message.
I have no clue as to how to correctly fix this issue. I looked at my HD and I seem to have 32GB available, which I would have thought would have been ample space. I have started to remove unwanted files and backup to CD large image files. So this should free up some more space. The question is will this be enough to get rid of this issue and is it associated with the amount of HD space on my drive? or would I need to run some script etc? or download/buy some other product to fix this?
Your help is greatly appreciated.
Max

OK I tried Macaroni...and when I tried to work with a TIFF file I get the same Startup Disk is FULL message. The I get an adobe message saying Scratch Disk is FULL.
Any further suggestions would be appreciated.

Startup Disk Full shows up

Dear Sir,
Please help me to solve this problem,
My Macbook Pro shows some errors 'Startup Disk Full',
and the bad thing is,it shows after i on my Macbook and the popup comes up before i can entering the menu,
So what should i do now?

It's after 2am her in the US.
Can you start up in safe mode? If so, empty your trash if there is anything in there. Also, start deleting some files or transfer them to an external disk.
Mac OS X 10.6: Starting up in safe mode
Mac OS X: What is Safe Boot, Safe Mode?
Mac OS X: Starting up in Safe Mode
Going to bed now. The night owls will need to take over from here if you need further help.

Macbook air startup disk full, after removed 149GB pic folder

After I removed ALL pictures worth of 149GB, I still get the "startup disk full" message. It pops out all the time, more than frustrating, my air is not just a typewriter.

After trashing the pictures did you empty the trash? Look under the Finder menu.

What do you do when message is "startup Disk Full"?

what do you do when message is "startup Disk Full"?

You must Move or trash some really big GB+ sized files right away, before OSX destroys itself.
Empty the Trash if you haven't lately.
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is likely the easiest/best, and is now free...
http://www.omnigroup.com/applications/omnidisksweeper/download/
And if needed, you can use Terminal to run it in admin mode to see files/folders your user can't see...
http://www.macobserver.com/tmo/article/how_to_recover_missing_hard_drive_space/

WHAT I DO WHEN THE SCREEN IS BLUE BECAUSE Startup Disk FULL?

WHAT I DO WHEN THE SCREEN IS BLUE BECAUSE Startup Disk FULL?

Have a look to this post : Blue Screen on Startup with MacBook Air Rev A (fitted with Hard Drive)

FTP Server Won't Authenticate - since "Startup Disk Full"

Similar Messages

Maybe you are looking for