FTP services with OAS

Hi, i have to migrate all my web site to OAS 4.0.8.1 on NT, but i need the FTP services because i have many files in others servers that i need down it in my server by my web site.
How I form OAS?
Any suggestion...?
Thanks..
Claudia

OAS is an HTTP 1.1/1.0 server. The FTP server needs to be installed seperately. This is not part of OAS.
There are lot's of free/shareware ftp servers available on NT. You may have to use one of them.
null

Similar Messages

How do you set up ftp services with outside of network access?

What are the steps to set up a password protected directory for our clients to ftp files to?
I've turned on ftp services and created a testftp directory, with access to everyome, but can't access the files. It never asks me for a password.
We have AT&T dsl service. The connection goes to a Linksys router and on to multiple switches. Each of our users have assigned static ip's.
Thanks for the help,
Chas

The Mac OS X Server Security manual has a discussion of setting up ftp and the share points and related. Here's the [Tiger Security|http://images.apple.com/server/macosx/docs/TigerServer_Security_Config021507.pdf] manual, and here's [Leopard|http://images.apple.com/server/macosx/docs/LeopardServer_Security_Configv10.5.pdf].
If you'd prefer a description here rather than the manuals, what follows are the basics.
I'm here assuming you have a firewall between the Internet and your server; a firewall attached to the DSL modem. If you have an external static IP and an internal private (192.168.0.0/16, 10.0.0.0/8, etc) via NAT, you'll need a firewall with reasonable port-mapping capabilities. If you're static and public throughout, you need only poke holes; you probably don't need the port-mapping stuff. (Or you could have a direct connection to your Mac OS X box; I don't usually configure things that way.)
First, open your firewall and allow access via the ftp ports (port 20 outbound and port 21 inbound, typically) and open up the ephemeral port range.
Then create a user and directory via whichever service you are using -- Workgroup Manager, Open Directory or otherwise. Within Workgroup Manager, you can set up share points; basically locations that the ftp daemon is permitted to touch.
Then wander into Server Admin and enable the ftp server.
Now if I wanted to do this without exposing my cleartext username and cleartext password over every hotel and coffee shop LAN I might use (and I'm not kidding; "ftp security" is an oxymoron), I'd create a username and its directory per your usual means, use Server Admin to configure and launch sftp daemon, and open up port 22 at the firewall. In my experience, sftp is easier to administer, and operates with ssh and with PKE authentication, and it doesn't post your password to Craigslist -- and beyond discussions of the (lack of) security, ftp tends to be somewhat fragile; it really gets into trouble traversing firewalls.
Given my experience with ftp over the years, here is [why I don't want to use ftp|http://64.223.189.234/node/530] -- sftp is just so much easier to deal with, and to secure.

Advice to configuring Oracle report services with OAS 10.1.3.5.0

Hi All
We were using OAS 10.1.2.3.0 (Forms & Reports component) for our J2EE applicaitons
but recently , we have upgraded to 10.1.3.5.0 (J2EE & Web Server component)
the issue is I couldn't find the report services component , even I tried to linking reports from 10.1.2.3.0 via mounting instance in mod_oc4j.conf but it's not working
Please advice

hi,
http://onlineappsdba.com/index.php/2009/05/22/how-to-upgrade-oracle-application-server-10g-r2-1012-formsreports-in-r1212i-5983622/
This link might be help ful for ya..
Regards
Fabian

FTP service not working anymore. ??

We have successfully been using ftp service with a new XServe 2 (Base Station 802.11n as gateway) for about a month. But, possibly following the latest firmware update that was run on the base station a few weeks ago, the ftp service just stopped working.
FTP works within the network if I connect via Cyberduck using the internal server address. But, to connect from the outside using the IP that is offered from within Base Station—the way we've done this successfully for a whole month—Cyberduck will spin and spin and never even see the network much less attempt to authenticate. Crazy.
• I have done a hard reset on Base Station. No change.
• I have unplugged and reset cable modem multiple times. No change.
• The ISP has confirmed that ports 20 and 21 are still open. Nothing unusual from their end.
• I've used ServerAdmin multiple times to stop & start ftp service, restart server, etc. No effect.
• Here's a curious detail: from the server I can go to whatismyipaddress.com, and it correctly sees the Base-Station-issued IP that I am trying to connect via ftp from the outside. Hmm.
Any experience from someone who can help isolate this issue? I'll admit, it appears to be a Base Station issue (maybe. likely.) since I can connect ftp from within the network. And, I am about 60-70% certain the latest firmware update was run near the time it spontaneously stopped working. But, ftp had been working. Not sure what is different now or why resetting things is not fixing anything.
Thoughts? Thanks in advance!
Greg

Yeah im able to connecto to my account no problem. Its that everytime I try to log in to my email on my N8, it keeps saying it could not connect. I just dont understand what this has happened, I never had such problem before.
Did Nokia close hotmail accounts acces for Symbian phones or something?

Cannot create Proxy service with JCA transport

Hello everyone.
I have some issues while trying to create ftp service with jca transport. I follow the instruction in this tutorial:
http://blogs.oracle.com/MarkSmith/entry/osb_and_ftp_adapter_in_11g
I stuck in Step 4, cannot create proxy service to use JCA file that I created by JDeveloper 11g (11.1.1.5). When I specify jca file for proxy service, a error message returned:
<ALSB Console> <BEA-494002> <Internal error occured in OSBConsole : Transport exception occurred with the following message:
Invalid JCA file for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, JCA file must contain JCA activation spec properties.And these are my jca file content that created by JDeveloper:
<adapter-config name="myJCA_FTP_service" adapter="FTP Adapter" wsdlLocation="myJCA_FTP_service.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/ftp/MyFtpAdapter"/>
<endpoint-interaction portType="Put_ptt" operation="Put">
    <interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
      <property name="PhysicalDirectory" value="/home/FTP-shared/upload"/>
      <property name="FileType" value="ascii"/>
      <property name="Append" value="false"/>
      <property name="FileNamingConvention" value="osb_%SEQ%"/>
      <property name="NumberMessages" value="1"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>Is there anyone who had tried to use JCA transport with Ftp adapter already? Please give me a suggestion.
Any response is appreciated
Regards, Cuong Pham

To get to the basics.
You use GET to read files from an FTP location - This can be done by an OSB proxy service only.
You use PUT to write files to an FTP location - This can be done by an OSB business service only.
So forget that you need a proxy service for PUT.

Performance with OAS 9i

Has any body deployed forms, developed in Form6i, on Oracle Application Server 9i.
Is there any performance improvement with OAS 9i as a new feature 'Form services' has been introduced?
Is it now suitable for making big web enabled applications?
Ajay

You shouldn't need to worry about the installer as it uses the correct jre on it's CD. I just ran it from the kde command line ie: /mnt/cdrom/runInstaller.
You don't need the database on the same machine, just set up iAS as a client to your database ie: set up TNSNAMES.
That said, the installation of 9iAS always failed on my RH7 and I've had to crank the install files by hand. 8iAS never seemed to have the problems.
Steve

Can not connect to Cerberus FTP Server with PASV

I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
Here is the log from filezilla
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
Response:          220-220-Welcome to Cerberus FTP Server
Response:          220 220 Created by Cerberus, LLC
Command:          USER test
Response:          331 User test, password please
Command:          PASS ***********
Response:          230 Password Ok, User logged in
Command:          CLNT FileZilla
Response:          200 Command okay
Command:          OPTS UTF8 ON
Response:          220 UTF8 support on
Command:          PBSZ 0
Response:          200 PBSZ=0
Command:          PROT P
Response:          200 PROT P OK, data channel will be secured
Status:          Connected
Status:          Retrieving directory listing...
Command:          PWD
Response:          257 "/" is the current directory
Command:          TYPE I
Response:          200 Type Binary
Command:          PASV
Response:          227 Entering Passive Mode (external IP,195,83)
Command:          MLSD
Error:          Connection timed out
Error:          Failed to retrieve directory listing
Result of the command: "show running-config"
: Saved
ASA Version 8.0(4)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.10 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group att
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service FTP_PASV_Ports tcp
description Passive Ports
port-object range 35000 35999
object-group service FTPS tcp
description FTPS
port-object eq 990
access-list outside_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq ftp
access-list outside_access_in extended permit tcp any any eq telnet
access-list outside_access_in extended permit tcp any any eq smtp
access-list outside_access_in extended permit tcp any any eq www
access-list outside_access_in extended permit tcp any any eq pop3
access-list outside_access_in extended permit tcp any any eq https
access-list outside_access_in remark passive FTP port range
access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
access-list outside_access_in extended permit tcp any any eq ssh
access-list outside_access_in extended permit tcp any any object-group FTPS
access-list outside_access_in extended permit tcp any any eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www server www netmask 255.255.255.255
static (inside,outside) tcp interface https server https netmask 255.255.255.255
static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group att request dialout pppoe
vpdn group att localname @static.sbcglobal.net
vpdn group att ppp authentication pap
vpdn username @static.sbcglobal.net password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password rcuFiQnIXLd encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:ecb5356a2f5e680b
: end
I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.

Dan,
Looking at the output,
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
You can find more info here:
https://supportforums.cisco.com/docs/DOC-23206
Mike

Registering Apache 1.3.4 with OAS 407 on RedHat Linux 5.2

Hi,
Has anybody tried or succeeded in registering Apache 1.3.4 with
Oracle Application Server 4.0.7 running on RedHat Linux 5.2?
We're having trouble registering Apache as an External Web
Listener for OAS. Applying the correction for step #2 under
registering Apache servers also hasn't given us any success in
rebuilding Apache.
Has anybody encountered the error message below when compiling
the Apache 1.3.4 to work with OAS after updating the EXTRA_LIBS
in Apache CONFIGURATION File with the value given on the
documentation.
The Error Message
Using config file: Configuration
Creating Makefile
+ configured for Linux platform
+ setting C compiler to gcc
+ setting C pre-processor to gcc -E
+ checking for system header files
+ adding selected modules
+ doing sanity check on compiler and options
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_log_error_old'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_palloc'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_internal_redirect'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`gMimeTypesFile'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_log_printf'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_setup_client_block'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_destroy_sub_req'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_get_basic_auth_pw'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_listeners'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_sub_req_lookup_file'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_pstrdup'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`gImplName'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_table_add'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_get_remote_host'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_signal'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_send_http_header'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ows_module'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_should_client_block'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_rwrite'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_table_set'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`ap_get_client_block'
/home/oracle/ows/4.0/lib/libapadp.so: undefined reference to
`alias_module'
make: *** [dummy] Error 1
** A test compilation with your Makefile configuration
** failed. This is most likely because your C compiler
** is not ANSI. Apache requires an ANSI C Compiler, such
** as gcc. The above error message from your compiler
** will also provide a clue.
Aborting!
Your comments or suggestions are most welcome.
Thanks,
--Edsel
null

Hi ,
     First of all please check availability of your OS + DB requiremnts whether it is supported by SAP or not.You can check this at Product Availability Matrix at ::
http://service.sap.com/pam
     If this support for your environment i.e.RedHat Linux 5.2 with Oracle 10G then be informed that after starting sapinst in step create database it will prompt you for installing your oracle DB. So open a new window & install your databse ,do the patching of your DB & then continue with sapinst after successfull installation of oracle.Rest of details sapinst will prompot you during instal;lation.
    Hope this will guide you for your query.
Thanks..
Mohit

Connecting Via Windows FTP Service

I recently moved several sites that used Contribute to a new
webserver (Windows 2003 running IIS 6). The server uses Windows FTP
Service.
To create a FTP account I created a Windows Account and then
a Virtual FTP directory with the same name as the windows user and
pointed that virtual directory at the root of the site I want to
update with contribute. I gave the Windows account full control on
the site root folder. I can FTP connect via Internet Explorer and
the command line.
When connecting via contribute I get an error saying
The directory you specified does not exist. Please make sure you
entered the directory name correctly. On some servers,
file/directory names are case sensitive"
Contribute seems to be trying to change directory to a folder
with the same name as the FTP virtual directory, rather than to the
folder that the virtual directory points at.
here's the error log from contribute
Date: 11/27/2006
LocalTime: 14:07
Host: 80.76.207.49
Port:
LoginID: myFTPUserName
Path: /myFTPUserName/
Passive Enabled: false
ProxyHost: NoneContribute Alternate Rename: no
Contribute Optimized: yes
======================== Test Results
==========================
NOTE: Microsoft FTP Service has been detected. For more
information on FTP server compatibility issues, please see
http://www.macromedia.com/support/contribute/ts/documents/ftp_info.htm
Login: SUCCESS!
Changing Directory To: /myFTPUserName/ Error. The directory
you specified does not exist. Please make sure you entered the
directory name correctly. On some servers, file/directory names are
case sensitive.
----------------------- FTP log from the last operation
> CWD /ftp
< 550 /ftp: The system cannot find the file specified.
> CWD /ftp/
< 550 /ftp: The system cannot find the file specified.
> CWD /
< 250 CWD command successful.
> RNFR ftp
< 550 ftp: The system cannot find the file specified.
> MDTM ftp
< 550 ftp: The system cannot find the file specified.

Hi!
I think the windows service is using a different systemaccount that your other application, and that account does not have rights to read the sbo-common database.
You can change the account used by your service on the service definition or in the SERVICES application of Windows.
Sir Harold

How to enable FTP service in Solaris 10

Hello, Everybody
I installed my first Solaris 10 today, but I have a problem with FTP process, I found I could not ftp to my new server from other equipments. It seems that FTP service is disabled by default.
Could you any guy tell me how to enable FTP in Solaris 10?
Thanks in advance.
-jason

Since the OS is Solaris 10, how about using SMF's svcadm tool to enable/disable ftp service.
eg.,
# svcadm disable /network/ftp
# ftp localhost
ftp: connect to address 127.0.0.1: Connection refused
Trying ::1...
ftp: connect: Network is unreachable
ftp> bye
# svcadm enable /network/ftp
# ftp localhost
Connected to localhost.
220 sunfire.anonymous.com FTP server ready.
Name (localhost:giri): 331 Password required for giri.
Password:

ESB: inbound file and outbound ftp adapter with multiple directories

Basically I want to scan directories and write new files ftp directories. I could figure out how to do that for one directory. However I need to scan multiple directories and ftp upload files contained in those directories to corresponding ftp directories. Number of directories and their names are only known at run time. All directories are under one parent directory, both locally and the remote ftp site. We can assume all ftp directories exist.
I could not figure out how to this. Is this possible at all? Directory names seem to be only specified at design time, for both inbound file adapters and outbound ftp adapters.
Pranab

Chris, I am not really sure this is the right place to ask this question. But hopefully you might have something in your armour to help me out.
My requirement is to configure an inbound File/FTP adapter to read from a Directory which can be known only at runtime. A webservice call returns the file name and network path of the file to be read, but that happens only during the run time. I guess one way possible is, you configure a File/FTP Adapter with a logical name for directory and set the physical directory path using the endpoint property. But in that case, I should know the Physical directory @ deployment time.
I would like to know whether it is possible to manipulate the Endpoint property of an ESB Service (SOAP Service/Routing Service/Adapter Service) during runtime.
So is there any way to get the enpoint property configured during runtime??? Otherwise dO you recommend some other solution for this use case???
Any help would be appreciated.
-Sudheer

FTP upload with Flex 3

Is it possible to upload a partiular file, in this case a
users answer file, to an FTP site with out any interaction from the
user. For example, when they are done the test, upload the answer
file to an FTP site (without using cold fusion or asp or
.net)?

I have downloaded the coded and converted it to work with
Flex 3 (changed it to WindowedApplication, and updated the
FlexFTP-app.xml file). When i run it, I get the following:
220 jpl Microsoft FTP Service (Version 5.0).
USER jhughes
331 Password required for jhughes.
PASS *****
230 User jhughes logged in.
PASV
227 Entering Passive Mode (66,109,241,93,12,42).
LIST
125 Data connection already open; Transfer starting.
226 Transfer complete.
TYPE I
200 Type set to I.
PASV
227 Entering Passive Mode (66,109,241,93,12,43).
STOR //test.txt
550 /test.txt: Access is denied.
It allows me to connect when I have the correct password but
it will not allow me to upload or download files. Any ideas?

Ftp/networking with uverse

So back in June I had an issue with my ftp not being able to reach servers while on my home att uverse network. Archived here: http://discussions.apple.com/thread.jspa?threadID=2048726&tstart=180
After several weeks of restarting the att wireless router/modem and creating new networks, it finally worked. Now I'm back to where I started, unable to connect to ftp serves, with the exact same issues. The created network is the exact same.
Also the apple software update server is inaccessible for the same reasons.
Edit: All other network issues work fine, i.e. internet, email, etc.
Any clues as to why this problem occurs with uverse? Solutions? Purely an issue with uverse?
Message was edited by: John Littrell

Well, I did not attempt to utilize this potential solution because everything is working again. So for three days, I couldn't connect to software update or my ftp servers, and now, without changing any settings, it's working fine.
I'm inclined to agree that it's an issue with Uverse in general. Which is a shame, because there bundled packages and the actual service has been outstanding, barring this issue. As a whole, much better than my experiences with Time Warner.

Document/literal messaging with OAS 9.0.4

please let me know if i have this right...
my understanding is that if i want to do document/literal soap messaging to a wrapped pl/sql function with OAS 9.0.4 then i have to go rpc/endcoded and use a string for my xml document payload?
any input would be most appreciated.
thanks in advance.
Message was edited by:
user521233

If you are new to Web Services, you should really consider using the latest version of the OAS stack. With 9.0.4, you should only work with RPC/Encoded and the basic data type supported out of the box.
Using 10.1.3.2 (or any 10.1.3) is really where you want to start.
This is just my personnal opinion, and I do understand that it's not always possible to move to the latest release. However, pushing back may be your best option.
Best,
-Eric

Exception occurred while ftpying files using FTP service

Hi,
We are using an FTP service component for copying file to remote location.
We are getting the following exception while FTPying the file:
com.adobe.idp.DocumentError: The document pointing to the file ------- could not be found. It may have expired, been removed prematurely, or subject to a network filesystem failure. Consider increasing the document disposal timeout if expiration seems likely.
Regards,
Carter J

Check out the NetComponents java package at http://www.savarese.org/oro
I use it for downloads with success, but it does have methods to "store" files to the server.
Just download the NetComponents.jar and put it in your classpath.
Your code would be something like this...
FileInputStream fis = new FileInputStream("c:\\myfile");
FTPClient ftp = new FTPClient();
try {
ftp.connect("ftp.foobar.com");
ftp.login("username","password"); // if it's not anonymous
ftp.storeFile("filename", instream);// note that you must close input stream yourself
} catch(IOException e) {
} finally {
if(ftp.isConnected()) {
ftp.disconnect(); // throws IOException
if(fis != null) {
fis.close();
You may want to check each call on the FTPClient ftp object like so...
int reply = ftp.getReplyCode(); // reply code will tell you what last ftp command did
if(!FTPReply.isPositiveCompletion(reply)) {
throw new IOException("Couldn't login"); // or do something
Hope this helps,
Carl

FTP services with OAS

Similar Messages

Maybe you are looking for