Ftp set up for a NAS

I want to set up a network attached storage for FTP file acces. I'm a bit of a newb on FTP setup, but I can muddle around in my drives firmware well enough to figure out it's configuration.
What I'm not too clear on, are there any tweaks and port settings the Verizon rounter needs to allow outside access to this drive? If so, what are they.

Log into your router
select firewall settings
select port forwarding
select new entry
add the destination ip address of the ftp server
under protocols select ftp
select OK
That's the simplistic route. If you really intend to use FTP I would suggest changing your listening port to something other than 21 else you'll have a lot of hacking traffic.
SFTP is a much more secure way of doing it.

Similar Messages

Issue in Flat File load through FTP set up

Hi All,
I am trying to load the flat file using FTP set up ( through process chain ).
I put a file in the FTP server, the file is being picked up from the FTP server but I cannt see the same in Interface file manager (ZIFM) under unfinished or comleted jobs.
I am not able to understand where is the eror?
any suggestion for this would be of great help.
regards
Amol
Edited by: Amol Jaiswal on Nov 8, 2008 12:33 PM

i don't get you.
You are trying to FTP a file to your application server in your process chain; is that correct?
Marco

Wire transfer payment set up for US

Hi
Has anybode worked on wire transfer set up for US company code ( International payments ) ? Where can I get documentation on this subject ?
Regards
Raj

Hi,
You can set up payment methods for ACH and wire transfers in tcode FBZP. Those are used in F110.
1. Select the payment method for wire or ACH when running F110. It will create a file for you to use for the banks.
2. Setup paying company codes, house banks and accounts, bank determination, country and company payment methods and bank selection. You will have to use program RFFOUS_T for doing the ACH payment.
3. You then do an FTP using the banks software transfer file and select the file you created and then send it to the bank.
4. For wire transfer configuration please use Payment Method T and Payment Program RFFOUS_T also you can use program RFFOEDI1. To customize the program please read program documentation.
Thanks
Arman

FTPS on PI for Sender & Receiver

HI ALL,
my sender and reciver system are FTP servers we are using PI 7.1
customer wants make this a secure connectivity ,we are trying to FTPS option.
Query
1)How & from where i can find out the exsisting FTP Server supports FTPS .. ?
2)for the sender FTP server ,do we have to give the certificates from PI ..or FTP server admin has to give certifiactes and we have to import them in PI..and what is that cartifiate
3) For the receiver FTP system ,do we have to give the certificates from PI or FTP server admin has to and we have to import them in PI. ?
4)can we achive FTPS without using certificates .. ? if we are using creaticates User ID and Pwd is required or not .. ?
thanks
Souz

Hi,
If you select FTPS as connection security,its uses SSL and Transport Layer security internally.as per my knowledge you no need to provide any certificates,PI uses stadard internet security standards.
If you selected FTPS for Connection Security, then enter the following details:its same for sender and receiver.
1) Under Command Order, specify the sequence of commands used to authenticate and secure the connection.
Retain the default setting. Only adjust the sequence of commands to match those expected of the FTP server if you encounter problems with the FTP connection. For information about the correct setting, see the documentation for the FTP server.
2) If you want the adapter to authenticate itself to the FTP server by X.509 certificate and public key cryptography, select Use X.509 Certificate for Client Authentication.
The corresponding key/certificate pair must be saved in a keystore view of AS Java.
3) Enter the Keystore and the X.509 Certificate and Private Key.
refer below link
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/658ac3344a4de0e10000000a1553f7/frameset.htm
Regards,
Raj

Port Set-up for Access to office PC from Home Mac

Hello,
I have a G5 at home with a AEBS (g) where I manage my own website via FTP and have a home network.
I just opened a new office where I have a PC (to manage the security cameras), an iBookG4 and will buy a PowerMac in a month. I just set up a new AEBS (n) and it works great to connect to the internet. Since it is a new office I have never had to connect to the office PC from home and I need to do that to see the cameras over the internet.
Also, I want to be able to manage my website from the office via FTP.
I know that these two things are done by setting up port forwarding. However, I have very limited knowledge about Networks and connectivity so I would ask anyone to explain it as if it was "Port Forwarding set-up for Dummies".
I have 5 static IPs that my ISP gave me in case they are useful.
Thanks,
elto

Hi Duane:
Thanks so much for your input. To answer your questions, I have a Netopia Modem (from bellsouth) which is compatible with 802.11g. Also, I have a Netgear Switch for the 3 computers I have on the network (iBook, Dell PC and a new MacPro).
For some reason I am not able to port foward so that I can access a computer from my house. I already assigned a Static IP to the computers and nothing.
Regards,
elto

Airport Extreme blocking remote access for my NAS?

Having spent over 2 hours on the phone to both LG and Apple Care I still can't get my remote access working for my NAS. I don't know much about networks, but I am slowly having to learn! Apple care seem to think that the AEBS might not be compatible?? I've tried lots of forums, lots of google self help and exhausted the customer service options - you're probably thinking I should give up. Well this is my last chance saloon - any help would be greatly appreciated.
This is my set up:
NAS: LG N2R1DD2 2 Bay DVD Network Attached Storage 2 TB
AEBS: MB763LL/A (A1301)
ISP: Virgin cable
Everything else on the NAS works a treat, it's just the remote access that is the problem. LG spent a long time on the phone looking into this and said that it is the router. I've checked with Virgin and they confirm they do not block any ports, so am pretty sure issue is with router. I've set up the NAS correctly to enable DDNS and UPnP, which it reports as successful and working correctly. I've enabled NAT port forwarding on the router, and tried to manually open up port 80.
Any thoughts would be most welcome.
Thanks.

I am not sure but I think you skipped a step. Look around for the use of consolidate library function.
I did the same thing and after I pointed to the right drive on the Airport Disk It worked flawlessly allowing me to stream to my powerbook from all over the house.
Unfortunately, once I went to bed and laptop and MyBook Pro went to sleep, I started havong problems.
Looks like this function of Airport n is still very Alpha.
Hope that helps

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Setting timeout for all the web test scripts in the solution

Hello,
I have around 16 web test scripts (using VSTS 2010 ultimate version) in my project (in a solution). By default the timeout set for each request is 60 sec. I need to increase the timeout to 180 sec. Currently, I am clicking on each request and modifying
the timeout parameter from the Properties window.
Is there any common setting for timeout available which would be acting across all the scripts?
Thanks.

Hello,
We only can set Timeouts for a separate request in Visual Studio Web Test. There is no way to set Timeout for all requests in VS IDE. But you can write you own logic code using
Timeout Property in a web test plugin to set Timeout for all requests in a web test.
About how to write a web test plugin, please see:
How to: Create a Web Performance Test Plug-In
Best regards,
Amanda Zhu <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

What is the best home set up for a family to share/use apple products

Hi, I am relatively new to apple (have an iPad) and having been a PC user for years I was pleasantly surprised with the apple experience and am now trying to work out the best set up for me, my husband and young son as I am buying them both of them apple products this Christmas. New Mac laptop/ ipad for hubby and then an ipod touch for my son oh and a new mac laptop for me. We are also thinking of moving from Blackberries to iPhones. Yes we seem to be hooked! but i am unsure about the home family set up and how to replace my PC network that I run off an 8TB server.
In reading the forums I keep seeing people talk about problems they have with two apple IDs and trying to merge them. I have also heard about a family ID allowing us to share apps legally. I am really nervous of setting us up wrong and then having problems later and hence i am now looking for some advice on how to share as much as we can legally but also make usage practical and not invading each others privacy. thoughts so far:
Music - I think we are happy to share the same music and access using one ID (we currently don't buy much music from apple but have lots of CDs we share).
Photos - It would be nice to share photos - as long as my son or husband cannot accidentally delete photos of mine (which is my biggest concern). I currently load all camera photos onto my 8TB storage box as the network owner and my husband has full access to copy any photo to his laptop but can never delete the original copies by accident.
Apps - If possible i would like us to share these but they are cheap enough these days to separate if really needed. Would be good to share licence for pages etc though
cloud, contacts, facetime, email - this is what is making me consider separate IDs or learning how to have multiple users in one apple ID - I do not want to have to share synced contacts with my husband. I have near 300 contacts now through work etc and he will not want them plus i will not want his or him being able to delete mine by mistake. and then for email and facetime, well I want to give him his privacy so I do not receive his messages etc. especially now that we are considering switching to iPhones
Then last but not least, i don't know the best solution for my son. he is only 7 years old so even though I don't want to pay for things again I don't want him being able to download "just any" app from the purchased icon in Appstore. Also, is there a child friendly setting to prevent him from viewing inappropriate content on the internet?
Appreciate I have asked a lot of questions here but I am looking for any genuine advice out there. Thank you in advance to any potential advisers.

Welcome to the Apple Community.
You don't need to use the same ID on a device for iCloud and iTunes.
iCloud covers mail, contacts, calendars, reminders, notes, bookmarks, photostream, document syncing etc and for these I recommend you each have your own ID's, this will stop others from having access to and likely more importantly being able to edit or even delete your personal information.
Someone of Age needs to be responsible for an account, so for younger children you will need to create and be responsible for an account yourself but let the child use it.
For iTunes you could use a single account so everyone can share music and apps or you could use separate accounts (there are ways to share content between users, Apple provides homesharing to do this).
When choosing how to proceed with iTunes, it might be worth remembering that someday your children will reach 21 (or whatever age they feel they have become independent) and will likely want their own account, changing accounts later may make it difficult to access previous content.
Photostream now has shared albums, so you can share just what you want with others. Shared photos using shared albums cannot be deleted by others with different accounts, but if you all shared the same account they could be.
Facetime and messages can also use an ID independently of each other, iCloud and iTunes. Separate ID's are recommended for these, joint accounts can be problematic.
iTunes has parental controls for youngsters, however at 7, I suggest you don't reveal the password to him and enter it yourself when he needs to purchase something, otherwise you may receive unexpected bills.

I want to use my icloud email address as a new apple ID. It was an additional email contact address I originally set up for my child. But now, I'd like to set her up on Family Sharing, using that email as her ID. Obviously, when I try to use it wh

I want to use one of my icloud email addresses as a new apple ID. It was an additional email contact address I originally set up for my child. But now, I'd like to set her up on Family Sharing, using that email as her ID. Obviously, when I try to use it when setting up a new apple ID, it says the email is already being used (Yes, by ME) and I need to select a different one. Can I somehow delete that email address in order to set up a new apple ID using it? Or is there another way to "re-use" that address for my child's new ID?

"Well, then I want to be able to merge that one and the one my purchases are on..."
This is exactly what I want to do but don't think I can:
I noticed the following :
If you attempt to create an Apple ID which is the same as your @icloud email address from the online facility, it does not allow you (can't use an Apple associated email address as your Apple ID). However - if you start a fresh device - such as a new iPhone, iPad (must be mobile it seems), and then create an iCloud account and Apple ID from the prompts when setting up the mobile device, it IS possible to have your Apple ID and @iCloud email address as the same. I know because I just did it!
Unfortunately for me, the result I got above is not for one of my own ID's but a friends, and I would VERY much like to do the same - my current Apple ID is a completely different email address from my iCloud account. Trying to get them the same in my situation is a major bother - I think that if I wipe a device (such as an iPhone5 that is mine) and try to setup as I did my friend's device, then I will get a conflict because the iCloud email I have ALREADY exists. This is my worry and I will not attempt this until I get the new iPad 4 soon to test this.
There is an inconsistency here between the two methods of creating Apple ID's and iCloud accounts.
Overall in my opinion, the Apple ID system as currently available from Apple is not designed very well, and should be addressed.
Best wishes -

Connecting to an external display using the setting optimised for built in screen?

i am having trouble connecting to an external display with the lid closed and the settings is optimised for built in display.
it was working nicely until yesterday when i changed the resolution.
and now i cant take it to optimised for built in display, only if the lid is opened and i want it closed.
can i know how to return it to the setting (optimised for built in display) with the lid closed?

Hello there, hasan.
The following Knowledge Base article offers some great information for troubleshooting usig and external display with your Mac:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to set filter for few Setup Objects on Geneneral Foundation?

Controlling the download of sub-entities:
By default all sub-entities are downloaded. Pass a non-existing value
for the parameter (primary key) of the sub-entity if you don't want to
download a specific sub-entity.
For example, if you don't want to download the values of a value set,
then use following input to FLEX_VALUE attribute while setting filter;
FLEX_VALUE='THIS_IS_A_NON_EXISTING_VALUE_I_DONT_WANT_TO_DOWNLOAD_VALUES'
VALUE_SET
Notes:
- To download '$FLEX$.%' value sets pass '$FLEX$.%' argument.
- Upload API automatically submits the hierarchy compiler request
- FLEX_VALUE_SET_NAME is a required argument for download.
You can find the following parameters in Set Filter screen of Value Set Values.
VALUE_SET has subenities such as VSET_SECURITY_RULE, VSET_ROLLUP_GROUP and VSET_VALUE.
Setting value for attribute FLEX_VALUE_SET_NAME downloads all the subentities. If you want
to restrict the subentities, set appropriate filter at VSET_SECURITY_RULE, VSET_ROLLUP_GROUP
and VSET_VALUE.
Parameters:
VALUE_SET
| FLEX_VALUE_SET_NAME : Value set name.
|
+-VSET_SECURITY_RULE
| FLEX_VALUE_RULE_NAME : Value set security rule name.
| PARENT_FLEX_VALUE_LOW : Independent value for the dependent value sets.
|
+-VSET_ROLLUP_GROUP
| HIERARCHY_CODE : Hierarchy (rollup group) code.
|
+-VSET_VALUE
PARENT_FLEX_VALUE_LOW : Independent value for the dependent value sets.
FLEX_VALUE : Flexfield segment value.
DESC_FLEX
Notes:
- Upload API automatically submits the flexfield compiler request
- Upload API automatically submits the DFV view generator request
- APPLICATION_SHORT_NAME is a required argument for download.
You can find the following parameters in Set Filter screen of Descriptive Flexfields.
DESC_FLEX has subenities such as DFF_REF_FIELD, DFF_CONTEXT and DFF_SEGMENT.
Setting value for attributes DESC_FLEX and DESCRIPTIVE_FLEXFIELD_NAME downloads all the subentities.
If you want to restrict the subentities, set appropriate filter at DFF_REF_FIELD, DFF_CONTEXT
and DFF_SEGMENT.
Parameters:
DESC_FLEX
| APPLICATION_SHORT_NAME : Application Short Name.
| DESCRIPTIVE_FLEXFIELD_NAME : Descriptive Flexfield Name.
|
+-DFF_REF_FIELD
| DEFAULT_CONTEXT_FIELD_NAME : BLOCK.FIELD reference field name.
|
+-DFF_CONTEXT
| DESCRIPTIVE_FLEX_CONTEXT_CODE : Context Code
|
+-DFF_SEGMENT
END_USER_COLUMN_NAME : Segment Name
APPLICATION_COLUMN_NAME : Column Name
KEY_FLEX
Notes:
- Upload API automatically submits the flexfield compiler request
- Upload API automatically submits the KFV view generator request
- Upload API automatically submits the structure view generator request
- APPLICATION_SHORT_NAME is a required argument for download.
You can find the following parameters in Set Filter screen of Key Flexfields.
KEY_FLEX has subenities such as DFF_REF_FIELD, DFF_CONTEXT and DFF_SEGMENT.
Setting value for attributes APPLICATION_SHORT_NAME and ID_FLEX_CODE downloads all the subentities.
If you want to restrict the subentities, set appropriate filter at KFF_FLEX_QUAL, KFF_SEGMENT_QUAL,
,KFF_STRUCTURE,KFF_WF_PROCESS,KFF_SH_ALIAS,KFF_CVR_RULE and KFF_SEGMENT.
Parameters:
KEY_FLEX
| APPLICATION_SHORT_NAME : Application Short Name.
| ID_FLEX_CODE : Key Flexfield Code.
|
+-KFF_FLEX_QUAL
| | SEGMENT_ATTRIBUTE_TYPE : Flexfield Qualifier Name
| |
| +-KFF_SEGMENT_QUAL
| VALUE_ATTRIBUTE_TYPE : Segment Qualifier Name
|
+-KFF_STRUCTURE
| ID_FLEX_STRUCTURE_CODE : Structure Code
|
+-KFF_WF_PROCESS
| WF_ITEM_TYPE : Workflow Item Type
|
+-KFF_SH_ALIAS
| ALIAS_NAME : Shorthand Alias Name
|
+-KFF_CVR_RULE
| FLEX_VALIDATION_RULE_NAME : Cross Val. Rule Name.
|
+-KFF_SEGMENT
SEGMENT_NAME : Segment Name
APPLICATION_COLUMN_NAME : Column Name
MENU
You can find the following parameters in Set Filter screen of Menus.
PARENT_MENU_NAME Name of the menu to start downloading at. If this
parameter is specified on its own, that menu and
all its children will be downloaded. If specified
with FUNCTION_NAME and/or SUB_MENU_NAME, then only
the menu entry with that function and/or submenu name
immediately under the PARENT_MENU_NAME will be
downloaded.
FUNCTION_NAME Function name to limit download to. If this parameter
is specified then PARENT_MENU_NAME must also be
specified in order to download menus. Specifies
the function on a menu entry immediately under
PARENT_MENU_NAME which will be downloaded; all other
menu entries under PARENT_MENU_NAME will not be
downloaded.
SUB_MENU_NAME Sub Menu name to limit download to. If this parameter
is specified then PARENT_MENU_NAME must also be
specified in order to download menus. Specifies
the Sub Menu on a menu entry immediately under
PARENT_MENU_NAME which will be downloaded (along with
all its children); all other menu entries under
PARENT_MENU_NAME will not be downloaded.
MENU_APP_SHORT_NAME Application short name of Menu. The menu on the resp
for this application will be downloaded. If you
pass this parameter, do not pass any of the other
parameters; this parameter is only supported on its
own.

Oh never mind.... I figured it out myself helps to read up on the manuals. d'oh. sorry for the bandwidth waste...

To set HOTSPOT for a field in ALV-oops and when clecked should call transac

Hi,
I need to set HOTSPOT for a field in O/P list using ALV-oops and when clecked should take me to Transaction VA01. Please help....
Thanks,
Prabhu

Hi,
Please go through this code it may help u.
REPORT zcls_alv_oops MESSAGE-ID z1.
TABLES : mara.
Types Declaration..\
TYPES :
BEGIN OF t_mara,
matnr TYPE matnr,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_mara,
BEGIN OF t_marc,
matnr TYPE matnr,
werks TYPE werks_d,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_marc.
Internal Tables Declaration..\
DATA :
i_mara TYPE TABLE OF t_mara,
i_marc TYPE TABLE OF t_marc,
i_fcat1 TYPE lvc_t_fcat,
i_fcat2 TYPE lvc_t_fcat.
Constants Declaration..\
CONSTANTS :
c_cont1 TYPE scrfname VALUE 'CONT1',
c_cont2 TYPE scrfname VALUE 'CONT2'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS:
s_matnr FOR mara-matnr NO INTERVALS.
SELECTION-SCREEN SKIP 1.
PARAMETERS :
p_hotspt RADIOBUTTON GROUP r1 DEFAULT 'X',
p_bttn RADIOBUTTON GROUP r1.
SELECTION-SCREEN END OF BLOCK b1.
\* Class forward referncing.
CLASS lcl_rcvr_class DEFINITION DEFERRED.
\* Pointers Declaration..
DATA :
lp_rcvr TYPE REF TO lcl_rcvr_class,
lp_cont1 TYPE REF TO cl_gui_custom_container,
lp_cont2 TYPE REF TO cl_gui_custom_container,
lp_grid1 TYPE REF TO cl_gui_alv_grid,
lp_grid2 TYPE REF TO cl_gui_alv_grid.
\* Local Class Definiton.
CLASS lcl_rcvr_class DEFINITION.
PUBLIC SECTION.
METHODS :
hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
ENDCLASS.
\* Local Class Implementation.
CLASS lcl_rcvr_class IMPLEMENTATION.
METHOD hotspot_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row_id-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD handle_double_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
ENDCLASS.
\* Start of Selection
START-OF-SELECTION.
\* Extract the Material Master data for the Input Material.
SELECT a~matnr
a~mtart
b~maktx
INTO TABLE i_mara
FROM mara AS a
INNER JOIN makt AS b
ON a~matnr EQ b~matnr
WHERE a~matnr IN s_matnr
AND b~spras EQ sy-langu.
END-OF-SELECTION.
IF NOT i_mara\[\] IS INITIAL.
\* Call Screen to display the Material Master data.
CALL SCREEN 100.
ELSE.
MESSAGE s121 WITH text-006.
ENDIF.
\*& Module DISP_GRID OUTPUT
\* text
MODULE disp_grid OUTPUT.
\* Build the Field catelog for Material Master data.
PERFORM build_fcat.
\* Display the Material Master data using ALV.
PERFORM disp_alv.
ENDMODULE. " DISP_GRID OUTPUT
\*& Module USER_COMMAND_0100 INPUT
\* text
MODULE user_command_0100 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
\*& Form build_fcat
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARA'.
IF p_hotspt EQ 'X'.
ws_fcat-hotspot = 'X'.
ENDIF.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ENDFORM. " build_fcat
\*& Form disp_alv
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv.
IF lp_cont1 IS INITIAL.
\* Create the Container Object of Material Master.
CREATE OBJECT lp_cont1
EXPORTING
container_name = c_cont1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6 .
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Master.
CREATE OBJECT lp_grid1
EXPORTING
i_parent = lp_cont1
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Master data by calling method.
CALL METHOD lp_grid1->set_table_for_first_display
CHANGING
it_outtab = i_mara
it_fieldcatalog = i_fcat1
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Set Handler for the Hot Spot Event.
CREATE OBJECT lp_rcvr.
IF p_hotspt EQ 'X'.
SET HANDLER lp_rcvr->hotspot_click FOR lp_grid1.
ELSE.
SET HANDLER lp_rcvr->handle_double_click FOR lp_grid1.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " disp_alv
\*& Module STATUS_0100 OUTPUT
\* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN_STAT'.
SET TITLEBAR 'T_100'.
ENDMODULE. " STATUS_0100 OUTPUT
\*& Module STATUS_0200 OUTPUT
\* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'PLANT_STAT'.
SET TITLEBAR 'T_200'.
ENDMODULE. " STATUS_0200 OUTPUT
\*& Module DISP_GRID_plant OUTPUT
\* text
MODULE disp_grid_plant OUTPUT.
\* Build the Field catelog for Material Plant data.
PERFORM build_fcat_plant.
\* Display the Material Master Plant data using ALV.
PERFORM disp_alv_plant.
ENDMODULE. " DISP_GRID_plant OUTPUT
\*& Module USER_COMMAND_0200 INPUT
\* text
MODULE user_command_0200 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
\*& Form build_fcat_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat_plant.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'WERKS'.
ws_fcat-scrtext_m = text-004.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ENDFORM. " build_fcat_plant
\*& Form disp_alv_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv_plant.
IF lp_cont2 IS INITIAL.
\* Create the Container Object of Material Plant data.
CREATE OBJECT lp_cont2
EXPORTING
container_name = c_cont2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Plant data.
CREATE OBJECT lp_grid2
EXPORTING
i_parent = lp_cont2
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Plant data by calling method.
CALL METHOD lp_grid2->set_table_for_first_display
CHANGING
it_outtab = i_marc
it_fieldcatalog = i_fcat2
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
ELSE.
\* Call method 'REFRESH_TABLE_DISPLAY' to refresh the grid data.
CALL METHOD lp_grid2->refresh_table_display.
ENDIF.
ENDFORM. " disp_alv_plant

HT204053 I need to change my i cloud e-mail address to the same one I set up when I purchased my apple account I just created an I cloud address and when Ijust read the set up for I cloud it says I should use the same e-mail address that I started with H

I did not know that when I created a e-mail address that I was suppose to use the same one that I created when I first signed up with Apple I phone. I want to change my e-mail address to the one I first had How can I change it? I do not need two e-mail accounts It should have read that when you are setting up an e-mail address use the one that you first signed up with. Not after you go through all the set ups for I cloud it tells you at the end to use your account that you first started with. Can you please help me I am new at this and I still can not set up on my computer with my phone to I cloud so if I had my phone stollen I can find it I also have and I pad to set up yet It is 3 days and I still can not set it up
Thank You and Hoplefully I can change my e-mail address so I can have everything on one account

If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.

HT204053 I have tried to load iCloud onto my Vista opperated pc but do not get a control panel with which to set it up. Each time I use my iTunes id to log into the iCloudI am told that it is an apple id but not set up for the Cloud. How do I get the cont

I have tried to install iCloud on to my Windows Vista pc. No control panel is present and when I try to login to iCloud using my iTunes id, I am told that it is an Apple id but not set up for the cloud. without the control panel where do I set up my iCloud id?

You can not setup a new iCloud account using a PC. You must use an Apple device (Mac or iPhone/iPad) to create the account, then sign into it using your PC.

Ftp set up for a NAS

Similar Messages

Maybe you are looking for