Ftp setup - can't get kernel!
Actually, I ripped a friends PC to install arch on it. While I wanted to install the kernel-scsi-image, I fetch response of the system that it can't find the image.
Has anyone removed the kernel images, that are used by the arch iso cd????
I used ftp.archlinux.org as source. Afaik I can't switch sources while installation procedure.
It woulr be nice to get help pretty soon, as I am sitting here, having another cup of coffee, telling my friend it will work out in the end.
I found it in the arch news. Anyway. I felt more comfortable with leaving the kernel names as they have been used so far, and naming the new kernels kernel26 etc. No need to brake the system, don't you agree?
If the system has to be changed for strong reasons, then the basic installation sources should be changed, too, at the same time. Therefore, it would be nice to have a newer iso in short time.
Similar Messages
-
Cisco 1812 wireles setup, can't get it to work
Hello everyone,
I've read trough the "871 wireless setup" topic, which I found very helpful, but I still can't get my wireless working. Basically I have a Cisco 1812W and I would like both wireless and wired to be on the same subnet. We aren't using DHCP, so the IP's are all static (even for the wireless clients). I can connect to my wireless SSID, but ping doesn't go trough either way. Wired connections are working fine. So the wireless client is connected, but has no IP address as far as the router goes (show Dot11 associations shows it's IP as 0.0.0.0) , but the wireless client does have an IP set up.
I guess I'm overlooking something in my config, so here it is (i took out the firewall rules and aaa setup, they aren't relevant if i'm not mistaken and there's a limit to post size):
ip cef
ip tcp synwait-time 10
no ip bootp server
ip name-server <removed>
ip name-server <removed>
crypto pki trustpoint TP-self-signed-1358229530
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1358229530
revocation-check none
rsakeypair TP-self-signed-1358229530
crypto pki certificate chain TP-self-signed-1358229530
certificate self-signed <removed>
quit
username <removed>
bridge irb
interface Null0
no ip unreachables
interface FastEthernet0
description $ETH-WAN$$FW_OUTSIDE$
ip address extip extsubnet
ip access-group 101 in
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip inspect sdm_ins_in_100 in
ip inspect SDM_MEDIUM out
ip virtual-reassembly
ip route-cache flow
duplex auto
speed auto
interface FastEthernet1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
shutdown
duplex auto
speed auto
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation hdlc
ip route-cache flow
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Dot11Radio0
description 802.11g
no ip address
encryption mode ciphers tkip
ssid <removed>
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 <removed>
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1
description 802.11a
no ip address
shutdown
encryption key 1 size 40bit 7 1ED10A3EC0C5 transmit-key
encryption mode wep mandatory
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
interface Vlan1
description $FW_INSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
bridge-group 1
interface BVI1
ip address <internal router ip> <subnet>
ip access-group 100 in
ip nat inside
ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 <external router IP> permanent
ip flow-top-talkers
top 5
sort-by bytes
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
<bunch of static nats>
<access rules>
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
line aux 0
line vty 0 4
access-class 102 in
password 7 <removed>
transport input ssh
scheduler allocate 4000 1000
webvpn context Default_context
ssl authenticate verify all
no inservice
endOkay, I've somewhat figured it out. Apparently my WPA-PSK configuration doesn't work with the integrated Broadcom adapter found in the laptop I was testing it with.
Either that or my WPA-PSK configuration is broken.
I switched over to an open network with no encrpytion and everything works now. -
Wifi won't setup can't get past this point
I'm trying to setup a brand new MacBook Air. I can't log into my wifi because it keeps saying looking for networks with the spinning circle of death. If I leave it alone my screen will get to the point where it will dim, and it is still spinning
Hello Cscott409,
The following article provides a very useful troubleshooting guide that can help get your MacBook Air connected to your WiFi network.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
Allen -
After a Mac Mini server is setup, can I get the out of box experience by ..
resetting a file or running a program that will go through the setup process again with out doing a reinstall? I don't want/need to preserve any current settings. I just want to run through the setup again.
I was just curious. When I set up the server when I first got it, I wasn't 100% sure what role/options/services to check off and now wonder if I made some incorrect choices. I'm just playing around now and I'm sure I will reinstall. I really bought the mini server (because of the hardware option for the hard drives and memory) to attach to a Metric Halo LIO-8 digital audio processor via firewire for my audio system. I really will not be fully exploiting the features of SL server. I will definitely learn the os as I go along for the fun of it.
Thanks for the help, I'm sure I'll have some question in the future.
Joe
Message was edited by: joeinid for clarity -
HT4864 android setup can't get there from here.
tried everything - nothing works imap smtp. not getting asked about ports. wasting the whole night spinning my wheels
tried everything - nothing works imap smtp. not getting asked about ports. wasting the whole night spinning my wheels
-
I'm connected but can't get browser, email or even FTP ????
Special thanks for the article "Sun PPPoE on Solaris" by Phil Dibowitz and "Setting Up Solaris OS to Work with Cable Modems" by Muhammad Talha (I have DSL however). Without these 2 articles I wouldn't have gotten as far as I did.
First off I'm running on an AMD CPU with Realtek 8139 PCI plug in card.
Ok here is the problem. It looks like I have connected but I can't get the browser , email or even terminal FTP to work. I think I'm at the gateway but I can't get onto the internet.
Here is how my system looks right after I boot up .
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
rtls0: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
inet 0.0.0.0 netmask 0
ether 0:50:bf:6:5a:6d
sppp0: flags=10010008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4,FIXEDMTU> mtu 1492 index 3
inet 216.8.174.237 --> 216.8.136.29 netmask ffffff00
ether 0
I'm connected right? But why 2 IP addresses (one for me and one for the gateway?)
Solaris gives me notice during BOOT that it can't configure rtls0: for DHCP but then connects somehow? later on in the auto connect script (script copied from Phils article)
Also Phil recommends running debug to generate the connect-errors file. Here it is ! You can see that I HAVE CONNECTED !
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE Event Open (1) in state Dead (0): action SendPADI (2)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: Sending PADI to ff:ff:ff:ff:ff:ff: 18 bytes
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE State change Dead (0) -> InitSent (1)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: Received Active Discovery Offer from 0:90:1a:a0:a1:f4/rtls0:pppoed
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE Event rPADO+ (5) in state InitSent (1): action SendPADR+ (5)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: Sending PADR to 0:90:1a:a0:a1:f4: 42 bytes
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE State change InitSent (1) -> ReqSent (3)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: Received Active Discovery Session-confirmation from 0:90:1a:a0:a1:f4/rtls0:pppoed
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE Event rPADS (7) in state ReqSent (3): action Open (7)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: Connection open; session 0C2F on rtls0:pppoe
rtls0:
bas1-windsor12
0:90:1a:a0:a1:f4
3119
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE State change ReqSent (3) -> Convers (4)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: connected
And yes I have tried everything I can think of with the DESKTOP PROXY SETTINGS. (but do I need to shutdown each time after I make a change? to the proxy?) Do I even need a proxy? My computer is plugged into a 3COM "Home Connect" HUB. I have an ALCATEL Speed Touch Home DSL modem.
Please help !
Dan
BTW... I POSTED THIS WITH ANOTHER COMPUTER>Please excuse me that I wrote "sysuncinfig", it was "sysunconfig". Did you try it?
Yes many times. Thanks. It is less work than a re-install.
>I had exactly the same problem like you, after many tryes with manual files editing, finally I used sysunconfig.
Can you give us last output of ifconfig -a.># ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
rtls0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 80.191.6.99 netmask ffffff00 broadcast 80.191.6.255
ether 0:50:bf:6:5a:6d
sppp0: flags=10010008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4,FIXEDMTU> mtu 1492 index 3
inet 216.8.175.129 --> 216.8.136.29 netmask ffffff00
ether 0
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
rtls0: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
inet6 fe80::250:bfff:fe06:5a6d/10
ether 0:50:bf:6:5a:6d
# ipconfig
ipconfig: not found
>As I understood, you have modem that is connected to the Internet and computers obtain IP from it. Am I correct?
If yes, and your line is some kind of xDSL (for example ADSL or something like that), probably that your modem is router (that kind of lines, there is no real modem with dial up, it just logs on).
I'm only using a 3COM Home Connect HUB. At one time when we had up to 4 computers on it, we were automatically re-assigned up to 4 different IP addresses each time.
>The problem with DHCP and such router is that your computer will have hostname "unknown", if you want other hostname, give it permanent IP and setup program will let you to specify IP address.
I will need to pay my service provider more for a "static IP address" What you are talking about is a "static IP" . Am I right?
>*How to know what IP you have put in default router? On your Windows computer run "ipconfig" command and see what is IP of Gateway (in Solaris it is called default router).
I got it ! Sorry about that you said try on the Windows computer. Thanks.
On my wifes computer it is 169.254.XX.XX
On mine also 169.254.XX.XX
The XX are not the same.
Thanks for all of your help.
Dan -
I am trying to install firefox and l can't get pass setup type on the type of setup whih is standard and then it tells me to close firefox so it can proceed with installation, when l do, it ask me do l want to cancel installation, if l say no then it tells me again to close firefox.
I want to make sure you're using the auto-update system, because that's the safest most reliable way to go, and it shouldn't appear in the download manager, so I lets make sure you're doing it right. <br/>
This is a screencast I made a couple of years ago. It refers to 3.5 and 3.6, but the steps are still the same: http://ilias.ca/screencasts/ISUHD45.mov
If that doesn't work, then maybe your Snow Leopard account doesn't have permission to update applications? -
I am trying to setup my ipad 2 but I can't get back to the wi-fi connections section. How do I get there, nothing is working.
The Wi-Fi connections section is in Settings > Wi-Fi
If the home screen is not visible tap the Home button, the button on the front of your iPad that has the rounded square in it. Once you reach the Home screen swipe through the screen of apps until you find the Settings app. Tap Settings and go to Wi-Fi.
If your iPad is completely non responsive, try a restart.
Press and hold the Home button and the Sleep button simultaneously ignoring the red slider. Keep holding until the Aple logo appears and your iPad will restart.
The sleep button is on the side of your iPad on the side opposite from the Home button. -
I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings? I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.
1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function. -
I already have a valid payment method for my iTunes account, but can't get past the Family Sharing setup prompt telling me to add a payment method . What to do?
I had the same problem and found a bunch of others did, too. Unfortunately all the posts had no responses! Anyway, I previously had my payment method linked to my paypal. I tried changing it to my credit card and it worked. Don't know if there's a bug with using paypal but that seemed to be the culprit for me. Good luck!
-
I'm trying to have existing Exchange accounts setup on my new iMac and can't get it to work.
I have existing Exchange accounts setup on my iPhone and iPad to access my work email. I'm trying to do the same on my new iMac and can't get it to work. I have it setup the same as my iPad and it asks me for my password over and over...any suggestions?
<Re-Titled By Host>Hi mwatts18,
As a preliminary troubleshooting step, you should reference the information in the following article:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
I would especially suggest that you delete the account and re-add it, making sure that you are entering the correct password when you add the account. Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
My Firefox menu button has disappeared. Why? How can I get it back? Without it I don't know how to get to my FTP. I never did anything to make this happen.
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden. -
I followed the steps to restore to factory settings now I can't get back my info from a prior backup. My pads screen was frozen on the connect to iTunes I needed to restore. I had to setup my pad as if it was new. How do I acess my prior backup
Once again, KP is correct, but I just want to add that if you don't see the backup in the drop down menu on the summary page of iTunes when you choose the restore from backup option, then the backup is unfortunately gone. If you backup your computer, the iPad backup should probably be in that computer backup. I use Time Machine with my MacBook Pro and can access backups from months ago.
On a side note, I also archive backups from time to time. If you right click on a backup name in iTunes>Edit>Preferences>Devices (Windows) or iTunes>Preferences>Devices (Mac) you can save that backup or archive it. It will be date and time stamped. I have no idea why I do this to the degree that I do it, but I probably have 12-14 iPad backups archived in iTunes. -
My mac has a "Kernel Panic" screen come up on start up. No matter what I try I can't get past this to fix it. Any hints out there? Do I have to completely wipe my drive and re-install to fix this? I can't even back up my files before doing this as like I say I can't get past the Kernel Panic message.
There are some fairly informative articles about kernel panics...
•OS X: About kernel panics:
http://support.apple.com/kb/TS3742?viewlocale=en_US&locale=en_US
Note the toggle triangles to get more info in the above article, some are
important steps, with alternative methods of accessing or performing a
suggested activity and may vary with the OS X version in use.
•Resolving Kernel Panics:
http://www.thexlab.com/faqs/kernelpanics.html
•Technical Note: TN2063: Understanding and Debugging Kernel Panics:
https://developer.apple.com/library/mac/technotes/tn2063/_index.html
The above TN covers several technical aspects to identify & troubleshoot.
Some are above the average user needs, but still can be rather helpful.
Hopefully you can get past the kernel panic screen, there are several
ways to attempt to do that, however if the issue is hardware, a reinstall
of the OS X may not cure the underlying cause of the symptom.
Good luck & happy computing! -
This group screen is infuriating. Why do I have to post my question twice?!?!
I registered for MobileMe, but when I go to www.me.com I'm brought back to the setup screen and I can't get past it. How do I get to the site that allows me to find my iPad?How do I get to the site that allows me to find my iPad?
You go to http://me.com/find/ on your computer.
On your iPad, you use the free Find my iPhone app from the AppStore.
Maybe you are looking for
-
Photoshop CS6 can't/won't open TIFF file created in photoshop CS3
Earlier this year, I was still using CS3. I created a bunch of original TIFF files, and modified files which had been created in CS1. When I am having to go back and reference these CS3 TIFFs, some of them are giving me an error message and refusing
-
Using Javascript to create concatenated string from checkbox fields to one text field
Hi. I have a PDF form that I am trying to have output to a spreadsheet that matches my database schema. Here is the dilemna: * I have a set of checkboxes for available languages (LANGUAGE_ENGLISH, LANGUAGE_SPANISH, etc.) When they export to spreadshe
-
Currently the iPhone does not offer video out capabilities
Currently the iPhone does not offer video out capabilities. Will there be a software update enabling the iphone to have this feature ? And wll the myvu universal work with the iphone if there is an update available ?
-
Dreaded ORA 1555 and EXP-00056 and LOB Corruption
I am on Oracle 10.2.0.4 on HP UNIX 11.2. I have started getting EXP-00056: ORACLE error 1555 encountered ORA-01555: snapshot too old: rollback segment number with name "" too small ORA-22924: snapshot too old I have looked into various causes and sti
-
Logic switches from comp-tracking to simple regions randomly
I got a problem with the comp-feature in Logic 9 Pro. Since I love this function I want to use it all the time while tracking. Unfortunately, Logic sometimes just doesn't give me comps and records (randomly in my eyes) just simple regions instead of